Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Engagements of JCB and tractors as and when required for dismantling of various works of various natures including disposal of excavated material upto all leads and lifts and including cost and carriage for avg 2kms as per the direction of engineer in charge |
| 2 | Engagemnet of tractors/ load carriers for transporting various materials like blankets, beds, pillows, matting etc from one centre to other centre as and when required as per site incharge Average lead 15 kms |
| 3 | Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, all leads and lifts as directed by engineer incharge -All kinds of soil |
| 4 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, ( All kinds of Soil) |
| 5 | Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil : |
| 6 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc and for shafts, wells, cesspits and including dressing of sides and ramming of bottoms including getting out excavated earth and disposal of surplus excavated earth as directed:All kinds of soil. |
| 7 | Disposal By Mechanical Transport including loading, unloading and stacking of excavated earth upto |
| 8 | Supply and filling of RBM /Nallah muck for Stone soling or any backfilling or filling or any other work as directed of specified size including spreading, watering, ramming, compacting with PRR of 8 to 10 Tonne capacity including carriage of the same from approved source upto site of work complete |
| 9 | Supply and filling of Khak bajri including spreading, watering, ramming, compacting with PRR of 8 to 10 Tonne capacity including carriage of the same from approved source upto site of work complete ( for Berm) |
| 10 | Providing / laying of NP2 RCC Pipes in proper position/ grade including cutting of road surface upto required depth, providing requisite cushion including carriage of all materials and pipes upto site of work complete. |
| 11 | Providing / laying of MS Pipes in proper position/ grade including cutting of road surface upto required depth, providing requisite cushion including carriage of all materials and pipes upto site of work complete. |
| 12 | Scarifying the existing bituminous road surface to a depth of 50mm and disposal of scarified material within all lifts and lead upto 1 km (by mechanical means). |
| 13 | Scarifying metalled (water-bound) road surface including disposal of rubbish lead upto 50m and consolidation of the aggregate received from scarifying with power road roller of 8 to 10 tonne capacity. |
| 14 | Providing and Laying Water Bound Macadam base course with Quarry Crushed stone aggregate 90 to 45mm size, stone screening 13.20mm size and binding material as per MORTH specification including screening, sorting, spreading to template and consolidation of each layer with PRR of 8 to 10 Tonne capacity including rolling on screening, dust and crushed stone including carriage of Quarry Crushed stone aggrregate and stone screeing, stone dust from approved soucrce upto site of wotk complete (Finished work to be measured) (ROLLING TO BE DONE STRICTLY AS PER DIRECTION OF ENGINEER IN CHARGE) |
| 15 | Providing and Laying Water Bound Macadam base course with Quarry Crushed stone aggregate 63 to 45mm size, stone screening 13.20mm size and binding material as per MORTH specification including screening, sorting, spreading to template and consolidation of each layer with PRR of 8 to 10 Tonne capacity including rolling on screening, dust and crushed stone including carriage of Quarry Crushed stone aggrregate and stone screeing, stone dust from approved soucrce upto site of wotk complete (Finished work to be measured) (ROLLING TO BE DONE STRICTLY AS PER DIRECTION OF ENGINEER IN CHARGE ) |
| 16 | Providing and Laying Water Bound Macadam base course with Quarry Crushed stone aggregate 53 to 22.4mm size, stone screening 11.20mm size and binding material as per MORTH specification including screening, sorting, spreading to template and consolidation with PRR of 8 to 10 Tonne capacity including carriage of Quarry Crushed stone aggrregate and stone screeing, stone dust from approved soucrce upto site of wotk complete (Finished work to be measured) (ROLLING TO BE DONE STRICTLY AS PER DIRECTION OF ENGINEER IN CHARGE ) |
| 17 | Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge including all carriages |
| 18 | Providing and applying of tack coat using hot straight run bitumen of grade VG 10 @ 0.50Kg / Sqm ( on Bt surface surface) including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler cleaning and preparing the xisting road surface as per specification including cost and carraige of all materials upto site of work complete ( necessary test mandatory ) |
| 19 | Providing and applying tack coat using hot straight run bitumen of grade – VG-10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications On bitumen/WBM/WMM surface @ 0.75 Kg/sqm. ( necessary test mandatory ) |
| 20 | Providing and applying tack coat using bitumen emulsion conforming to IS: 8887, using emulsion pressure distributer including preparing the surface and cleaning with mechanical broom.With medium setting bitumen emulsionOn W.B.M. /W.M.M. @ 0.4 Kg/sqm.( necessary test mandatory )including all carriages |
| 21 | Providing and laying bituminous macadam using crushed stone aggregates of specified grading premixed with bituminous binder, transported to site by tippers, laid over a previously prepared surface with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specifications and directions of Engineer-in-Charge.50 to 100 mm average compacted thickness with bitumen of grade VG-10 @ 3.5% (percentage by weight of total mix) prepared in Drum Type Hot Mix Plant of 60-90 TPH capacity. incl. Cost and carriage of all materials involved. ( necessary test mandatory ) |
| 22 | P/L SDBC using crushed stone aggregates of specified grading , pre-mixed with bituminous binder and filler,transporting the hot mix to work site by tippers, laying with paver finisher equipped wilh electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desire d compaction & density as per specification,complete and as per directions of Engineer in Charge: 25 mm compacted thickness with Bitumen : VG-10 @ 5% (percentage by weight of total mix) andlime filler @ 2%(percentage by weight of Aggregate) prepared in Drum Type HMP of60-90 TPH capacity. incl cost and carriage( necessary test mandatory ) |
| 23 | P/L of 6 mm thick seal coat of premixed fine aggregate (passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 Kg of bitumen of grade VG -10 per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface including hot mixing of fine aggregate and bitumen in hot mix plant, transporting the mixed material from plant site by mechanical transport up to the site of work, laying the mixed material with paver finisher to required level and grade rolling with road roller to achieve desired compaction including cost and carriage of all the materialhire charges of machinery and all taxes etc. complete( necessary test mandatory ) |
| 24 | Providing and laying of stone soling, hand packed, including carriage of same from approved source upto site of work complete. |
| 25 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) including cost and carriage of all materials involved. |
| 26 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including carriage of all materials from approved sources up to site of work complete. |
| 27 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including carriage of all materials from approved sources up to site of work complete. |
| 28 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)t including carriage of all materials upto site of work complete. |
| 29 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement.1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) including carriage of all materials upto site of work complete. ( all works upto plinth level) |
| 30 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) including cost and carriage of all materials involved. |
| 31 | Reinforcement for RCC work including straightening cutting, bending, placing in position and binding all complete (Thermo mechanically treated bars) including all carriages complete. FE-500 D or more |
| 32 | FORM WORKCentering and shuttering including strutting, propping etc. and removal of form for: |
| 33 | Foundations, footings, bases for columns |
| 34 | Return walls, walls (any thickness) including attached pilaster buttresses, plinth and string course fillets, kerbs and steps etc. |
| 35 | Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 36 | Columns, pillars, piers, abutments, posts and struts |
| 37 | Suspended floors, roofings, landings, balcones and access plateform |
| 38 | Edges of slabs and breaks in floors and wall ( Under 20 cm wid |
| 39 | Edges of slabs and breaks in floors and walls Above 20 cm wide |
| 40 | Arches, domes, vaults upto 6 m span |
| 41 | Providing wood work in frames of door windows clestory windows and other frame wrought framed and fixed in position with hold flat lugs or with dash fastever of required diameter and length (holdfast lugs or dash fastens shall be paid seperately imported wood i/c all carriage complete. IMPORTED WOOD |
| 42 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix (1 cement:3 coarse sand:6 graded stone aggregate 20mm nominal size). including cost and carriage of all materials involved. |
| 43 | Providing and fixing panelled or panelled and glazed shutters 30 mm thick for door windows and clerestory windows including M.S Butt hinges with necessary screws excluding panelling which will be paid for separately imported wood including cost and carriage of all materials involved. |
| 44 | Prviding and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical ,grains or cross bands and face veneers on both faces of shutters. With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws 30 mm thick including all carriages |
| 45 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. MDF board 12 mm thick Pre-laminated particle board with decorative lamination on both sides, Grade I, Type II IS : 14587 (design and board approved by engineer in charge) including all carriages |
| 46 | Providing and fixing 30 mm thick wire gauze shutters using galavanised M.S wire gauze of average width for aperture 1.4 mm in both directions with wire of dia 0.63 mm for doors ,windows and clerestory windows including ISI marked bright finished or /and black enamelled M.S butt hinges with necessary screws. [imported wood]. |
| 47 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butthinges bright finished of required size with necessary screws imported wood including all carriages |
| 48 | Providing and fixing 4mm thick panels of plain glass for fixed glazing panels/ shutters (only panel area to be measured) including cost of imported beadings of required size complete job as per direction of engineer incharge including all carriages |
| 49 | Engagement of labour for dismantaling/ taking out of existing civil work and disposing of material comoplete job including all carriages |
| 50 | 50mm thick cement concrete flooring 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement including carriage of all materials from approved sources upto site of work complete |
| 51 | 40mm thick cement concrete flooring 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished wit a floating coat of neat cement including carriage of all materials from approved sources upto site of work complete |
| 52 | 25mm thick cement concrete flooring 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished wit a floating coat of neat cement including carriage of all materials from approved sources upto site of work complete |
| 53 | 12mm cement plaster of mix 1:4 (1cement: 4 fine sand) including all carriages complete. |
| 54 | 12mm cement plaster of mix 1:6 (1cement: 6 fine sand) including all carriages complete. |
| 55 | 15mm cement plaster of mix 1:4 (1cement: 4 fine sand) including all carriages complete. |
| 56 | 15mm cement plaster of mix 1:6 (1cement: 6 fine sand) including all carriages complete. |
| 57 | Engagement of skilled labour like carpenter, electrician with all machinary like cutters , axe and all other necessary tools etc for purning of the trees |
| 58 | Engagement of suction pumps and motors for pumping out the water from trenches and the habitable area encountered during construction or during any unseen incident or as and when required asper the directions of site incharge and the requirements on site of work |
| 59 | Removal of unhygienic materials (so classified by the site engineer) from designated sites and its disposal as per directions, all inclusive |
| 60 | Clearance of slips |
| 61 | in ordinary soils disposal lead upto 50 m and lift upto 1.5 m. |
| 62 | in soils; mixed with moorum/Kankar/shingle/boulders; disposal lead upto 50 m and lift upto 1.5 m. |
| 63 | In soils; mixed with Decomposed Rocks; by blasting or any other means |
| 64 | Providing and applying 2.5mm thick road marking strips (retro-reflective) of specified shade/colour using hot thermoplastic material by fully/semiautomatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour,T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications. |
| 65 | White washing with lime to give an even shade : Old work (two or more coats) including all carriages |
| 66 | White washing with lime to give an even shade : Old work (one or more coats)including all carriages |
| 67 | White washing with lime to give an even shade on New Work (three or more coats)including all carriages |
| 68 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work including all carriages |
| 69 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new surface including all carriages |
| 70 | Painting road surface marking with adequate no. of coats to give uniform finish with read mixed road marking paint conforming to IS: 164, on bituminous surface in white/yellow shade including cleaning the surface of all dirt, scales, oil, grease and foreign material etc. complete. Old work ( One or more coats) including all carriages |
| 71 | Painting road surface marking with adequate no. of coats to give uniform finish with read mixed road marking paint conforming to IS: 164, on bituminous surface in white/yellow shade including cleaning the surface of all dirt, scales, oil, grease and foreign material etc. complete. New work ( One or more coats) including all carriages |
| 72 | Providing and fixing precast reinforced cement concrete 1:1.5:3 ( 1cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size)kilometer stone as per standard design including finishing smooth in 1:3cement mortar ( 1cement : 3 fine sand) including the cost of earthwork, concrete in foundation, painting and lettering etc. 35x111x25 cm size. complete job.including all carriages |
| 73 | Manufacturing supplying and fixing retro reflective sign boards made up of 2mm thick aluminum sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type-IV of ASTM-D-4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC : 67-2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminum alloy rivets @ 20cm c/c to back support frame of M.S. angle iron of size 25x25x3mm along with theft resistant measures mounted and fixed with 2 nos. M.S. angles of size 35x35x5mm to a vertical post made upto M.S. Tee section ISMT 50x50x6mm welded with 16.0 (Road Work) 224 base plate of size 100x100x5mm at the bottom end and including making holes in pipes, angle flats, providing and fixing M.S. message plate of required size steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical M.S.-Tee support to be painted in black and white colours). Backside of aluminum sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coats including all leads and lifts etc. complete as per drawing, specification and direction of Engineer-in-charge. |
| 74 | Mandatory/Regulatory sign boards of 900 mm diameter with part as length of 3750 mm. |
| 75 | Cautionary/warning sign boards of equilateral triangular shape having each side of 900 mm support length of 3650mm |
| 76 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete welded including all carriages |
| 77 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer and synthetic paint..M.S. tube including all carriages |
| 78 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer and synthetic paint.G.I. pipes including all carriages |
| 79 | Supplying/fixng of polygonal/RR masanory 2nd class quarry stone from approved source in dry with bond stones in G.I. wire crates of approved diameter by site incharge and mesh size of 100 x 100 mm and weight not less than 46 kg/crate including tipping,wrapping,cost of wire crates, carriages, loading, unloading all complete job strictly as per the direction of site incharge complete job incl: cos to crates |
| 80 | Supplying/fixng of boulder stone of approved size by site incharge in dry with bond stones in G.I. wire crates of approved diameter by site incharge and mesh size of 100 x 100 mm and weight not less than 46 kg/crate including tipping,wrapping,cost of wire crates, carriages, loading, unloading all complete job strictly as per the direction of site incharge complete job incld: cost of crates |
| 81 | Charges for Providing and fixing of water proof shamiyana of superior quality to be erected in Stand and for general public with crewl shade including dismantelling of the same after prade is over including furnishing all carriages erection charges handling etc including erecting of available Shamiyana VIP of size 2(20-0\\"x20-0\\") including all carriages |
| 82 | Charges for Providing and fixing of water proof shamiyana of superior quality to be erected in Stand and for general public with crewl shade including dismantelling of the same after prade is over including furnishing all carriages erection charges handling etc including erecting of available Shamiyana General of size 1(30'-0\\"x60-0\\") |
| 83 | Providing and fixing of flexible banner/hoardings with necessary lettering/writings as per directions of site Engineer complete job. |
| 84 | Hire charges of chairs including To and Fro carriage of chairs up to designated site including all leads lifts and handling charges complete.PVC Plastic Chairs A |
| 85 | Hire charges of Sofa for including To and Fro carriage of chairs up to designated site including all leads lifts and handling charges complete Sofa set (5 seated) |
| 86 | Hire charges for VIP chairs including To and Fro carriage of Chairs up to designated site. |
| 87 | Providing and fixing of PVC pipes Type -B material s weep hole or as required at site including all carriage and fitting and all accessories required as per the direction of site incharge and material must be of standard make as approved by site incharge 4\\" dia |
| 88 | Providing and fixing of PVC pipes Type -B material as weep hole or as required at siteincluding all carriage and fitting and all accessories required as per the direction of site incharge and material must be of standard make as approved by site incharge 3\\" dia |
| 89 | Providing and fixing of PVC pipes Type -B material s weep hole or as required at site including all carriage and fitting and all accessories required as per the direction of site incharge and material must be of standard make as approved by site incharge 6\\" dia |
| 90 | Providing and fixing G.I. chain link fabric fencing of required width inmesh size 50x50 mm including strengthening with 2 mm dia wire or nuts,bolts and washers as required complete as per the direction of Engineer-incharge Made of G.I. wire of dia 4 mm |
| 91 | P/F of angle section, flats hollow section etc of structural steel of standard make including primer coat and paint and all carriage and loading unloading as and when required as per direction of engineer incharge etc complete job |
| 92 | Distempering with dry distemper of approved brand and manufacture (two or more coats) and of required shade on new work, over and including water thinnable priming coat to give an even shade new shade |
| 93 | Distempering with dry distemper of approved brand and manufacture (one or more coats) and of required shade on old work to give an even shade. |
| 94 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level including all carriages |
| 95 | Usage of Lime within permises of area,entry and exit as and when required and as directed |
| 96 | Use of phenyl/dis-infectant (bottles of capacity 1 litre) for drains,lanes, toilets etc as and when required as per directions of site incharge |
| 97 | Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required |
| 98 | Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 99 | 0.63 mm thick with zinc coating not less than 275 gram/m2 |
| 100 | 0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 101 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxyprimer on both side of the sheet and polyester top coat 15-18 micronsusing self drilling/ self tapping screws complete approved and checked by engineer incharge Ridges/Valleys |
| 102 | Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. |
| 103 | 0.63 mm thick with zinc coating not less than 275 gram/m2 |
| 104 | 0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 105 | Providing and Fixing of Hi-Rib coloured profile G.S Sheets 0.5 mm thick including J or L Hooks, incld. Overlapping of sheets complete Horizontal/Vertical or Curved surface complete excld. Cost of rafters purlians inlcuding cutting to size and shape whereever required as approved by Engineer in charge. incld: Ridges & valleys |
| 106 | Applying priming coat: |
| 107 | With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 108 | With ready mixed aluminum primer of approved brand and manufacture on resinous wood and ply wood |
| 109 | With ready mixed red oxide Zinc Chromate primer of approved brand and manufacture on steel galvanized iron/steel works |
| 110 | Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge. |
| 111 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface toprepare the surface even and smooth complete. 1 mm thick |
| 112 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface. |
| 113 | Wall Painting with acrylic emulsion paint of approved brand andmanufacture to give an even shade. Two or more coats on new work shade and colour as approved by engineer in charge |
| 114 | Providing and fixing hardware items for doors ,windows and ventilators ALUMINIUM FITTINGSS M.S. spring, tower bolts, latches, handles, Aldrops, door stoppers of approved quality and make as directed by ENGINEER IN CHARGE. |
| 115 | BUTT HINGES 100x63x4 mm |
| 116 | BUTT HINGES 75x63x3.2 mm |
| 117 | HARD DRAWN HOOKS AND EYES 150 mm |
| 118 | Aluminium Handles 150mm |
| 119 | Aluminium Handles 100mm |
| 120 | Heavy Duty Aldrops 250x16 |
| 121 | Tower bolts 100 X 10 mm |
| 122 | Towerbolt 150x10 mm |
| 123 | Aluminium Hanging Door Stopper |
| 124 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS:15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown |
| 125 | CERAMIC GLAZED TILESProviding and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, inskirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement :3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 126 | Providing fixing of 300 x 300 matt finish 10 to 12 mm thick kajaria/ somany/ orient/ or of standard makepaver tiles as per IS 4457 :2007 laid over 20 mm thick bed of cement mortar 1:4( 1 cement : 4 coarse sand) etc complete job as per direction of engineer incharge |
| 127 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm |
| 128 | Providing and laying Polished Granite stone flooring in required designand patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with whitecement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, EliteBrown, Cat Eye or equivalent |
| 129 | LIGHTNING POINT (ONE LIGHTNING POINT SHALL INCLUDE WIRING FOR LIGHTNING POINTS IN 1.5 SQ.mm PVC INSULATED COPPER WIRE & 2.5 SQ mm PVC INSULATED MULTI STRANDED COPPER WIRE FOR LIGHTNING SUB-MAINS,6 AMP ONE WAY SQITCH WITH ALL BENDS, JUNCTION BOX ETC, 6 AMP S POLE MCB, 10 AMP DP POLE MCB, 2 WAY DB FOR HOUSING MCB ETC WITHIN WOODEN BOXES IN WALLS WITH 14 WATT LED LAMP ETC COMPLETE JOB |
| 130 | HEATING POINT WITH MODULAR (ONE POINT SHALL INCLUDE WIRING FOR HEATINGPOINTS IN 4.5 SQ mm PVC INSULATED MULTI STRANDED COPPER WIRE FOR HEATIING SUB-MAINS,16 AMP SWITCH SOCKET COMBINED,2 mm THICK PVC COUNDIT CHANNEL WITH BENDS AND JUNCTION BOX ETC, 10 AMP S POLE MCB, 10 AMP DP POLE MCB, 2 WAY DB FOR HOUSING MCB ETC WITHIN WOODEN BOXES IN WALLS ETC COMPLETE JOB |
| 131 | FAN POINT (ONE FANPOINT SHALL INCLUDE WIRING FOR LIGHTNING POINTS IN 1.5 SQ.mm PVC INSULATED COPPER WIRE120 mm ceiling fan/225 mm exahust fan with ceiling roses &PVC square blocks 350 watt electronic fan diameter 2mm thick PVC conduit WITH ALL BENDS, JUNCTION BOX ETC, 6 AMP S POLE MCB, 10 AMP DP POLE MCB, 2 WAY DB FOR HOUSING MCBETC WITHIN WOODEN BOXES IN WALLS, FAN CLAMPS AND FAN OF MAKE USHA OR EQUIVALENT ETC COMPLETE JOB |
| 132 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white PVC china flushing cistern & C.P. flush bend with fittings & C.I. brackets,40 mm flush bend, overflow arrangement with specials of standardmake and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid Makes:-Jaquar/Hindware/Cera |
| 133 | Providing and fixing water closet squatting pan (Indian type W.C. pan)with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C.flushing cistern, including flush pipe (of approved make) with manuallycontrolled device (handle lever) conforming to IS: 7231, with all fittingsand fixtures complete, including cutting and making good the walls andfloors wherever required.White vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests. |
| 134 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-(a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer |
| 135 | Proving fixing testing and commissioing of CP Fittings of standard make and as approved by engineer incharge |
| 136 | 15 mm nominal bore C.P. brass short body bib cock ofapproved quality conforming to IS : 8931 |
| 137 | 15 mm nominal bore C.P. brass 2 in 1 angle valve forof approved make |
| 138 | 15 mm nominal bore C.P. brass angle valve of approved make conforming to IS : 8931 |
| 139 | 15 mm nominal bore of standard back type C.P.brass close hole basin mixer pillar tap of approved quality and make,weighing not less than 1.560 kg |
| 140 | Towel rail C.P. brass 600 x20 mm together with a pair of C.P. brass brackets to fit the size of towel rail |
| 141 | CP grating circular type |
| 142 | Providing and fixing PTMT soap dish holder having length of 125mm,breadth 90 mm, height of 70 mm with concealed fitting arrangements,weighing not less than 96gms. |
| 143 | Providing and fixing PTMT Liquid soap container of 350 ml. capacity with concealed fitting arrangements etc complete job |
| 144 | Providing fixing of CP/ PVC tube connceting pipe with sink/basin/ flushing cistern and all other fitting accessories all complete job as per directions of site incharge |
| 145 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approvedmake and shade with 6 mm thick hard board backing : Rectangular shape 1500x450 mm |
| 146 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge |
| 147 | Providing & Fixing Stainless Steel Grab Bar 600 X 400 mmsize fixed to wooden cleats with C.P.Brass screwscomplete in all respects. |
| 148 | Providing and Fixing of PVC Floor Traps 110 mm of standard makeand all other fittings required as approved by engineer icharge |
| 149 | Providing, fixing, testing and commissioning of GI pipe as per relevant IS code& fittings such as tees, brass FPT elbows, reducers, male/female male adaptor with brass threads, clampsetc. jointing with rubber sealant as per manufacturer recommendationsCutting and making good thewalls, floors, R.C.C. work etc. cutting chase and fillingthe same with cement concrete 1:3:6 (1 cement : 3coarse sand : 6 graded stone aggregate 20 mm nominalsize) or cement mortar (1 cement : 4 coarse sand) asrequired etc. as approved by emngineer incharge 15 mm dia nominal bore of standard make medium duty |
| 150 | Providing, fixing testing, and commissioning of GI pipe as perrelevant IS Code & fittings such as tees, brass FPT elbows, reducers,male/female male adaptor with brass threads, clampsetc, jointing withrubber sealant as per manufacturer recommendations conforming . Steel Structural support asrequired/directed at Site including all civil work, cuttingand making good the walls, floors, R.C.C. work etc. as approved by emngineer incharge20 mm dia nominal bore of standard make medium duty |
| 151 | Constructing masonary chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement: 4 coarse sand) with C.I. surface box 100x100x75 mm (inside) with hinged coverand lock arrangement fixed in cement concrete slab 1:2:4 mix (1 cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cenment:5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement :3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design With F.P Bricks. |
| 152 | Supplying and fixing C.I. frame for manholes 455 x 610 mm rectangilar C.i. cover light duty the weight of cover not less than 23 kg |
| 153 | Dry random rubble masanory with hard stone in foundation and plinth using quarry stone with bond stone incld: carriage |
| 154 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable lockingarrangement and making necessary holes for inlet, outlet and overflowpipes but without fittings and the base support for tank. including ball cock valve |
| 155 | Providing & fixing full way lever operated forged brass ball valve of brass body with forged brass hard chrome plated steel ball tested to a pressure not less than 16 Kg / sqcm with threaded / flanged joints complete with nuts, bolts, gaskets, washers etc. 25 mm |
| 156 | Providing and fixing of 9 Watt Led Bulb in the permises of election area as and when required as peer the directions of concerned authority |
| 157 | Providing and fixing of plywood of grade 710 and minimum 10 yr warranty of standard make as approved anti termite and water proof including carriage loadin unloading complete job |
| 158 | 6 mm thick |
| 159 | 12 mm thick |
| 160 | 19 mm thick |
| 161 | Hire charges of diesel generator of minimum 4.5 kw for un interrupted power supply for 24x7 including fuel carriage compolete job |
| 162 | Proving and fixing of 1.5 mm thick electric wire of standard make and as per the standard specification etc comlete job |
| 163 | Providing and fixing of minimum 2 kg fire extinguisher of standard make as per BIS, ISI MARK AND ISO CERTIFIED etc complete job |
| 164 | Rent charges for providing & fixing of Rostrum/stage of size 16'-0'' x 16'-0'' for accomodation of chairs and sofas including access stairs to Rostrum all carriages and lifts complete job |
| 165 | Providing & laying of carpet of required size for rostrum and red coloured excel matting ( 3-4) feet wide along path leading to rostrum , complete job |
| 166 | Decoration of Divisional Office, Sub divisional office & othere office buildins including tri colour lights for 48 hours complete job |
| 167 | Providing and fixing of National flag of india made up hand spun and hand woven wool /cotton/silk khadi bunting i cloth manufactured as per the specifications laid down by the bureau of indian standards, with necessary hooking arrangement/rope for unfurling of flag,flowers etc. complete job Flag size, 1800mm x 1200 mm with dia of Ashoka Chakra of 370 mm |
| 168 | Providing and fixing Polyethylene- Aluminum- Polyethylene (PE-ALPE) Composite Pressure Pipes conforming to IS: 15450, U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature upto 80ºC, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. Elbows, tees, reducers, couplers and connectors etc.This includes testing of joints complete as per direction of the Engineer-in-charge: |
| 169 | Internal work-exposed on wall with clamps at 1.00 meter spacing |
| 170 | 1216 (16mm OD) pipe |
| 171 | 1620 (20mm OD) pipe |
| 172 | 2025 (25mm OD) pipe |
| 173 | Internal work concealed with clamps at 1.00 meter spacing including cutting the chases and making good the wall etc. |
| 174 | 1216 (16mm OD) pipe |
| 175 | 1620 (20mm OD) pipe |
| 176 | 2025 (25mm OD) pipe |
| 177 | External work including trenching and refilling etc. complete |
| 178 | 1216 (16mm OD) pipe |
| 179 | 1620 (20mm OD) pipe |
| 180 | 2025 (25mm OD) pipe |
| 181 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. |
| 182 | Internal work-exposed on wall with clamps at 1.00 meter spacing |
| 183 | PN-16 pipe, 16mm OD(SDR-7.4) |
| 184 | PN-16 pipe , 20mm OD(SDR-7.4) |
| 185 | PN-16 pipe , 25mm OD(SDR-7.4 |
| 186 | Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. |
| 187 | PN-16 pipe, 16mm OD(SDR-7.4) |
| 188 | PN-16 pipe , 20mm OD(SDR-7.4) |
| 189 | PN-16 pipe , 25mm OD(SDR-7.4 |
| 190 | External work including trenching, refilling etc. |
| 191 | PN-16 pipe, 16mm OD(SDR-7.4) |
| 192 | PN-16 pipe , 20mm OD(SDR-7.4) |
| 193 | PN-16 pipe , 25mm OD(SDR-7.4 |
| 194 | Providing /fixing of elastoperic bearings |
| 195 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.:Internal work-Exposed on wal |
| 196 | 15 mm dia. nominal bore |
| 197 | 20 mm dia. nominal bore |
| 198 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-incharge. Note: - Cement in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is content considered payable or recoverable separately All works upto plinth level |
| 199 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-incharge. Note: - Cement in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is content considered payable or recoverable separately All works above plinth level upto floor V level |
| 200 | Welding of damaged structural steel in proper position and grade as per directions of Engineer Incharge Complete incld: priming coat of approve steel primer |
| 201 | Lifting of Slab of bridges incld: jacketting and supports and necessary fitytings at site as per directions of Engineer Incharge complete job |
| 202 | Providing /fixing in position Expansion Joints Complete with U strip made of 24 Gauage copper strip MS angles with welded anchors and MS Top Plate bolts/Nuts Complete as per MOST standard drawing |
| 203 | Carriage of material supplied by Department from Divisional store to site of work including loading and unloading |
| 204 | Provision for unforseen items shall be paid as per SOR/Rates in Vouge |
| 205 | Chequerred precast cement concrete tiles 22mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, cleaning and curing complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) . Medium shade using 50% white cement and 50% ordinary cement. Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
