|
| 1 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all pigments etc., complete. Size of Tile 600x600. I/C all Labour T&P etc. also including all taxes for completion of work as per direction E/I. As per DSR No. 11.41.2 |
| 2 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS: 15622, of I/C all Labour T&P etc. also including all taxes for completion of work as per direction E/I. As per DSR No.11.39 |
| 3 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. I/C all Labour T&P etc. also including all taxes for completion of work as per direction E/I. As per DSR No. 15.56 |
| 4 | Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate I/C all Labour T&P etc. also including all taxes for completion of work as per direction E/I. As per DSR No. 11.3.1 |
| 5 | Providing and laying water proofing treatment on roots of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: I/C all Labour T&P etc. also including all taxes for completion of work as per direction E/I. As per DSR No. 22.6 |
| 6 | Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete.I/C all Labour T&P etc. also including all taxes for completion of work as per direction E/I. As per DSR No. 10.29.1 |
| 7 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. I/C all Labour T&P etc. also including all taxes for completion of work as per direction E/I. As per DSR No. 18.48 |
| 8 | Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges and rubber I/C all Labour T&P etc. also including all taxes for completion of work as per direction E/I. As per DSR No. 17.68.1 |
| 9 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: I/C all Labour T&P etc. also including all taxes for completion of work as per direction E/I. As per DSR No. 17.7.1 |
| 10 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled I/C all Labour T&P etc. also including all taxes for completion of work as per direction E/I. As per DSR No. 17.1.1 |
| 11 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamp making good the walls etc 25 mm nominal Dia Pipes I/C all Labour T&P etc. also including all taxes for completion of work as per direction E/I. As per DSR No. 18.8.3 |
| 12 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVCplain & brass threaded fittings and fixing the pipe with clamps at 1.00 walls etc 15 mm nominal Dia Pipes I/C all Labour T&P etc. also including all taxes for completion of work as per direction E/I. As per DSR No. 18.8.1 |
| 13 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. I/C all Labour T&P etc. also including all taxes for completion of work as per direction E/I. As per DSR No. 18.51.1 |
| 14 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched I/C all Labour T&P etc. also including all taxes for completion of work as per direction E/I. As per DSR No. 9.21.2 |
| 15 | Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, I/C all Labour T&P etc. also including all taxes for completion of work as per direction E/I. As per DSR No. 10.31 |
| 16 | Providing and fixing on wall face unplasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. I/C all Labour T&P etc. also including all taxes for completion of work as per direction E/I. As per DSR No. 12.41.2 |
| 17 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : 13.62.1 Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture I/C all Labour T&P etc. also including all taxes for completion of work as per direction E/I. As per DSR No. 13.62.1 |
| 18 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVCplain & brass threaded fittings and fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVCsolvent cement and the cost of cutting chases and making good the sameincluding testing of joints complete as per direction of Engineer in Charge DSR No. 18.8.1 |
| 19 | Providing and fixing 12 mm thick frameless toughened glass door shutterof approved brand and manufacture, including providing and fixing top &bottom pivot & double acting hydraulic floor spring type fixing arrangementand making necessary holes etc. for fixing required door fittings, allcomplete as per direction of Engineer-in-charge (Door handle, lock andstopper etc.to be paid separately) DSR No. 21.18 |
| 20 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour I/C all Labour T&P etc. also including all taxes for completion of work as per direction E/I. As per DSR No. 13.82.2 |
| 21 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. I/C all Labour T&P etc. also including all taxes for completion of work as per direction E/I. As per DSR No. 13.80 |
| 22 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete I/C all Labour T&P etc. also including all taxes for completion of work as per direction E/I. As per DSR No. 13.88 |
| 23 | Finishing walls with water proofing cement paint of required shade : 13.109.1 Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litres/10 sqm complete including cost of Priming coat. I/C all Labour T&P etc. also including all taxes for completion of work as per direction E/I. As per DSR No. |
| 24 | Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement: 6 coarse sand): 6.3.1 With F.P.S.(non modular) bricks I/C all Labour T&P etc. also including all taxes for completion of work as per direction E/I. As per DSR No. 6.3.1 |
| 25 | 12 mm cement plaster of mix : (1:4) I/C all Labour T&P etc. also including all taxes for completion of work as per direction E/I. As per DSR No. 13.1.1 |
| 26 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) I/C all Labour T&P etc. also including all taxes for completion of work as per direction E/I. As per DSR No. |
| 27 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : I/C all Labour T&P etc. also including all taxes for completion of work as per direction E/I. As per DSR No. 17.10.1.1 |
| 28 | 52 mm thick cement concrete flooring with concrete hardener topping. under layer 40 mm thick cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and I/C all Labour T&P etc. also including all taxes for completion of work as per direction E/I. As per DSR No. 11.4 Please Enable Macros to View BoQ information |
