|
| 1 | Dismantling of Plian or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattren sheets in roof coverings, ridges hips valleys complete all as specified and directed. |
| 2 | M & L for pre-painted hot-dip aluminium-zinc alloy metallic coated of any profile steel sheet corresponding to IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ150, 0.50 mm thick, of an approved colour and having yield strength of 550 MPa as in roof covering fixed with self tapping screws as specified up to anyheight including all necessary scaffolding and safety measures complete all as specified and directed. |
| 3 | M & L for pre-painted hot-dip aluminium-zinc alloy metallic coated plain steel sheet as per IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ150, 0.50 mm thick, of an approved colour and having yield strength of 550 MPa as in ridge/ valley/ gutter fixed with self tapping screws as specified any height Mtr height including all necessary scaffolding and safety measures complete all as specified and directed. |
| 4 | S&F Plain, 1.20 mm galvanised, mild steel sheeting, in ridges, hips, valley gutters, rain water box, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 including welding and sealing the gaps with APP including dismantling old unserviceable sheeting, complete all as specified and directed. |
| 5 | Dismantling wrought iron or mild steel work of any description incl in roof trusses complete all as specified and directed. |
| 6 | S & f for Rolled mild steel in framed work Fe-410W (Gde E-250) Quality B as in doors or gates /truss/purlin of angle or other section with gusset plates, rails, braces complete, drilled for fixing of steel sheeting or other covering. Doors, etc., to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed. |
| 7 | Erection and fixing only Rolled mild steel in framed work as in doors or gates /truss/purlin of angle or other section with gusset plates, rails, braces complete, drilled for fixing of steel sheeting or other covering. Doors, etc., to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed. |
| 8 | S & F for Roof trusses Fe - 410-W (Gde E-250) Quality B (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats, bolting etc. all as directed and as specified. |
| 9 | Erection and Fixing only for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats, bolting etc all as directed and as specified. |
| 10 | S&F in repairs Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n.exc 10cm long (16 to 20mm dia), all as specified and as directed. |
| 11 | M & L Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts, complete all as specified and directed. |
| 12 | M&L for One coats of synthetic enamel paint over & including a coat of red oxide zinc chrome primer over old steel surfaces of any description, not otherwise described, over 10 cm in width or girth, including preparation of surfaces complete all as specified and directed. |
| 13 | M&L for preparing of new steel & iron surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enameled paint over a coat of Red oxide zinc chrome primer zinc chrome complete all as specified and as directed. |
| 14 | M&L for Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in soft/loose soil complete all as specified and directed. |
| 15 | M&L for Cement concrete type (C-2) 1:3:6 using 40mm grded stone aggregate as in foundations, filling and mass concrete and as in post holes complete all as specified and directed. |
| 16 | Demolition of Brickwork or stone/boulder masonry, laid in Cement mortar complete all as specified and as directed. |
| 17 | M&L brick work with fly ash ‘ B’ bricks straight or curved on plan exc 6 m mean radius build in CM 1:6 all as specified as directed. |
| 18 | Taking down cement plaster of any description on concrete surfaces such as soffit of RCC slab, chajjas, ceiling and brick walls etc incl raking out joints, hecking for key scrubbing down with water and removal of rubbish off the premises complete all as specified and directed. |
| 19 | M&L Rendering 15 mm thick cement plaster in CM 1:6 on fair faces of brick/concrete work surfaces finished fair and even complete all as specified and directed. |
| 20 | M&L for Rendering 15 mm thick cement plaster in CM 1:4 on fair faces of brick/concrete surfaces finished fair and even, mixed wth water proofing compound admixture (if directed) as per manufacturer's instruction, complete all as specified and directed.Note :- WPC will measuered and paid separatly under relevant item of schedule. |
| 21 | Supply only Liquid water proofing compound complete all as specified and directed. |
| 22 | Material & Labour for preparation of new surfaces of plastered walls and applying Two coats of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. over and including a coat of primer and 1.0 mm thick white wall care putty (premium quality) over plastered surfaces of walls to prepare the surface even and smooth complete all as specified. |
| 23 | M&L for prepration of new plastered surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. |
| 24 | M&L for Three coats of white washing on new plaster and unplaster of wall surfaces including preparation of wall surfaces complete all as specified. |
| 25 | M&L for preparing old decorated plastered or unplasterd surfaces of ceiling including cornices, pilasters and other wall features etc by brooming down or steel wire brushing and sand paper, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and removing extra wall papdi ,peel off wall papdi by sand paper and making good with external wall care putty as per existing thickness and applying one coat of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete complete all as specified and as directed. |
| 26 | M&L Complete removal of existing treatment by means of mechanical scrubber and manually on the surfaces where the mechane can not reach and preparing the area with external wall care putty to a unifirm smooth surface for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior alkali resistance primer applied @ 0.90 litre/ 10 sqm over new surfaces on external surface as directed by Engineer-in-charge |
| 27 | Taking down chowkhats or frame exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter(s) (without taking off shutters from the frame), complete all as specified and directed. |
| 28 | S&F steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded, including one shop coat of red oxide zinc chrome primer, complete all as specified and directed. |
| 29 | S&F steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay, complete with out glazing bars, dovetailed or welded, including one shop coat of red oxide zinc chrome primer, complete all as specified and directed. |
| 30 | S&F Turbo ventilator SS built with vane thickness 0.9mm with ball bearings, turbine dia 760mm with bottom ring dia 600mm, FRP base plate 2mm thick clear 1.02 mtr wide and 1.65m long matching the profile of existing sheet, weight approx 8.0 Kg complete all as per manufacturer instructions and as directed. |
| 31 | M&L for broken stone/boulders hard core gauge n.exc 63mm deposited, spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surface complete all as specified and directed by Engr-in-Charge. |
| 32 | M&L for PCC (1:4:8) Type D2 using 40mm graded aggregate used as in sub base floor/pavings and finishing complete all as specified and directed by Engr-in-Charge. |
| 33 | M&L Sand filling under floors or in foundations including watering and consolidaion, all as specified and as directed. |
| 34 | M&L for Machine pressed precast concrete interlocking paver block, pre-polished of any shape and size confirming to IS 15658-2006 of 60 mm thickness M-40 Grade, with grey cement and pigment, all as specified and as directed. |
| 35 | Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) including all type of tiling, marble chips , terrazo finish where ever existing etc all as specified and directed. |
| 36 | M&L for 75 mm thick cement concrete M10 (Nominal Mix) with 40mm graded crushed aggregate finished even and fair laid to a slope of 1 in 12, laid in alternate bays, each bay not exceeding 3 m length with joint filled with bituminous mastic filling comprising a mixture of 1 part of heated Industrial bitumen 85/25 grade and two parts of heated sand as in plinth protection complete all as specified. |
| 37 | Taking down CI/PVC/AC pipes (including all fittings), with spigot and socket ends and lead joints including burning out joints of 100/75 mm dia pipe complete all as specified. |
| 38 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with brackets etc of 110 mm dia complete all as specified. |
| 39 | EM PORTIONTaking down carefully aluminium conductor/Copper conductor point wiring (light,fan,socket or power) complete including fittings such as switches,ceiling roses, pendants, regulators ,sockets etc. and removing (except those to be reused shall be kept in safe custody at the site ) and making good disturbed surfaces of walls, floors etc.to match with the existing complete all as specified. Please Enable Macros to View BoQ information |
| 40 | EM PORTIONTaking down carefully aluminium conductor/Copper conductor point wiring (light,fan,socket or power) complete including fittings such as switches,ceiling roses, pendants, regulators ,sockets etc. and removing (except those to be reused shall be kept in safe custody at the site ) and making good disturbed surfaces of walls, floors etc.to match with the existing complete all as specified. Please Enable Macros to View BoQ information |
