|
| 1 | M & L for brick work with fly ash bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 to any radius complete all as specified and directed.(a) 498.00 Sqm for GE(East) Area (b) 65.00 Sqm for GE(West) Area |
| 2 | M&L for Self Curing Ready Mix Plaster of thickness 10 mm to 15 mm, pre-packaged, ready-to-use formulated with cement, graded sand, polymers, and special self-curing compounds on Internal surfaces of walls, chajja, facia at any height with necessary scaffolding surface finished even and smooth including taking down cement or cement lime plaster, raking out joints and preparing for plastering the wall surface with white cement based polymer modified including disposal of rubbish, all complete as per the direction of Engineer-in-Charge.(a) 1500 Sqm for GE(East) Area (b) 1000 Sqm for GE(West) Area |
| 3 | M&L for Self Curing Ready Mix Plaster of thickness 12 mm to 15 mm, pre-packaged, ready-to-use formulated with cement, graded sand, polymers, and special self-curing compounds on external surfaces of walls, chajja, facia at any height with necessary scaffolding surface finished even and smooth including taking down cement or cement lime plaster, raking out joints and preparing for plastering the wall surface with white cement based polymer modified including disposal of rubbish, all complete as per the direction of Engineer-in-Charge.(a) 15000 Sqm for GE(East) Area (b) 20000 Sqm for GE(West) Area |
| 4 | M&L for Self Curing Ready Mix Plaster of thickness 5mm to 8 mm , pre-packaged, ready-to-use formulated with cement, graded sand, polymers, and special self-curing compounds on Internal surfaces of Ceiling, chajja, facia at any height with necessary scaffolding surface finished even and smooth including taking down cement or cement lime plaster, raking out joints and preparing for plastering the wall surface with white cement based polymer modified including disposal of rubbish, all complete as per the direction of Engineer-in-Charge.(a) 500 Sqm for GE(East) Area (b) 700 Sqm for GE(West) Area |
| 5 | Complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean, free from dust, loose paint etc by skilled labour complete all as specified and directed.(a) 6000 Sqm for GE(East) Area (b) 38391 Sqm for GE(West) Area |
| 6 | M & L for preparation of newly plastered surfaces of wall and applying two coats of acrylic emulsion paint with 1st quality acrylic (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over and including priming coat complete, as per manufacturer's specification complete all as specified & directed. Note :The work for periodical services shall include the following and the rates quoted by the bidder shall include the same-(i) The work pertaining to periodical services shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the materials like Exterior emulsion paint, putty etc after approval by the GE.(ii) The contractor shall upload with the documents under cover-I \\"Memorandum of Understanding\\"(MoU)with at least one of the manufacturers mentioned in the contract, failing which the bid shall be liable to be rejected.(iii) All Qty of Material , paint , premier & putty , whatever is specified by the OEM as per the manufacturer instuction shall be deposited with the Engr- in - Charge.(a) 7500 Sqm for GE(East) Area (b) 10000 Sqm for GE(West) Area |
| 7 | M & L for preparation of old plastered surfaces of wall and applying two coats of acrylic emulsion paint with 1st quality acrylic (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over and including priming coat complete, as per manufacturer's specification complete all as specified & directed. Note :The work for periodical services shall include the following and the rates quoted by the bidder shall include the same- (aa) The work pertaining to periodical services shall be executed by the contractor as per MoU from authorized applicator through manufacturer of the materials like Exterior emulsion paint, putty etc after approval by the GE. (ab) The contractor shall upload with the documents under cover-I \\"Memorandum of Understanding\\"(MoU)with at least one of the manufacturers mentioned in the contract, failing which the bid shall be liable to be rejected. (ac) All Qty of Material , paint , premier & putty , whatever is specified by the OEM as per the manufacturer instruction shall be deposited with the Engr- in - Charge. (a) 2790 Sqm for GE(East) Area (b) 26900 Sqm for GE(West) Area |
| 8 | M & L for preparation of newly plastered ceiling surface and applying two coats of acrylic emulsion paint complete all as specified and directed.Note :The work for periodical services shall include the following and the rates quoted by the bidder shall include the same-(i) The work pertaining to periodical services shall be executed by the contractor as per MoU from authorized applicator through manufacturer of the materials like Exterior emulsion paint, putty etc after approval by the GE.(ii) The contractor shall upload with the documents under cover-I \\"Memorandum of Understanding\\"(MoU)with at least one of the manufacturers mentioned in the contract, failing which the bid shall be liable to be rejected.(iii) All Qty of Material , paint , premier & putty , whatever is specified by the OEM as per the manufacturer instruction shall be deposited with the Engr- in - Charge.(a) 1500 Sqm for GE(East) Area (b) 1210 Sqm for GE(West) Area |
| 9 | M & L for complete removal of existing treatment on ceiling surface and preparation of old plastered ceiling surface and applying two coats of acrylic emulsion paint complete all as specified and directed.(a) 1500 Sqm for GE(East) Area (b) 10930 Sqm for GE(West) Area |
| 10 | Material & labour for preparation of old plastered/new surfaces of finished walls and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed. Note- Primer and emulsion to be carried out through air less spray machine with Mechanical meansThe work for periodical services shall include the following and the rates quoted by the bidder shall include the same.(i) The work pertaining to periodical services shall be executed by the contractor as per MoU from authorized applicator through manufacturer of the materials like Exterior emulsion paint, putty etc. after approval by the GE.(ii) The contractor shall upload with the documents under cover-I \\"Memorandum of Understanding\\"(MoU)with at least one of the manufacturers mentioned in the contract, failing which the bid shall be liable to be rejected.(a) 7500 Sqm for GE(East) Area (b) 11000 Sqm for GE(West) Area |
| 11 | Material & Labour for old finished walls and applying Two coats of 100% Premium acrylic emulsion paint with PU serum, colour stay technology having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed. Note- Primer and emulsion to be carried out through air less spray machine with Mechanical meansThe work for periodical services shall include the following and the rates quoted by the bidder shall include the same-(i) The work pertaining to periodical services shall be executed by the contractor as per MoU from authorized applicator through manufacturer of the materials like Exterior emulsion paint, putty etc after approval by the GE.(ii) The contractor shall upload with the documents under cover-I \\"Memorandum of Understanding\\"(MoU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall be liable to be rejected.(iii) All Qty of Material, paint , premier & putty , whatever is specified by the OEM as per the manufacturer instruction shall be deposited with the Engr- in - Charge.(a) 3500 Sqm for GE(East) Area (b) 11490 Sqm for GE(West) Area |
| 12 | M & L for premium quality joint free non skid ceramic tiles, coloured, any shade superior quality any type of colour / pattern dark / light as per approval, 7 to 8mm thick, (square/ rectangular), area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 and including dismantling of existing tiling including cement mortar bedding (including backing), removing rubbish off the premises complete all as specified and directed.(a) 624 Sqm for GE(East) Area (b) 1715 Sqm for GE(West) Area |
| 13 | M & L for premium quality joint free non skid ceramic tiles, coloured, any shade superior quality any type of , colour / pattern dark / light as per approval, 7 to 8mm thick, (square/ rectangular), area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors / skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 and including dismantling of existing tiling including cement mortar bedding (including backing), removing rubbish off the premises complete all as specified and directed.(a) 2580 Sqm for GE(East) Area (b) 9170 Sqm Cum for GE(West) Area |
| 14 | M & L for premium quality double charged/ultra charged vitrified tiles of any type of colour / pattern dark / light as per approval 8-10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 and including dismantling of existing tiling including cement mortar bedding (including backing), removing rubbish off the premises complete all as specified and directed.(a) Nil for GE(East) Area (b) 300 Sqm for GE(West) Area |
| 15 | M & L for joint free glazed coloured GLOSSY tiles, superior quality any type of colour / pattern dark / light as per approval of size 300 x 450 x 7mm thick/300 x 600 x 7 to 8mm thick, in vertical surfaces etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 and including dismantling of existing tiling including cement mortar bedding (including backing), removing rubbish off the premises complete all as specified and directed.(a) 2430 Sqm for GE(East) Area (b) 6200 Sqm for GE(West) Area |
| 16 | M & L for Granite 18- 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm thick screed in CM 1:4 including moulding (rounding edges), demolition of existing stone slabs laid bedded and pointed in any mortar and including rounding to edges of stone slabs one edge, such as in cooking platform, and other similar situations etc complete all as specified and directed.(a) 366 Sqm for GE(East) Area (b) 730 Sqm for GE(West) Area |
| 17 | Drilling through holes in granite stone for inserting pipes etc not exc. 25 mm dia complete all as specified and directed.(a) 78 Nos for GE(East) Area (b) 198 for GE(West) Area |
| 18 | M&L for Marble Udaipur Green/Bhaisiana Zebra 18 to 20 mm thick (table rubbed and premirror polished) in single piece with grooves at the edges in steps (treads/risers) and like set and jointed in neat cement slurry including pointing in epoxy grout to match marble shade, laid over and including 15 mm thick screed bed in CM 1:4 including roughning of existing stone incl rounding edges and double grooves (in every step) complete all as specified and directed.(a) 922 Sqm for GE(East) Area (b) 1630 Sqm for GE(West) Area |
| 19 | Dismantling brick tiles or terracing tiles, single layer of roofs including mud pushaka etc and demolished material disposed off out of MoD land roughening surfaces of old concrete by picking, sweeping/Brushing clean and washing down with water to remove dust and apply neat cement slurry with 3.0kg of cement per sq. metre complete all as specified and directed.(a) 2139 Sqm for GE(East) Area (b) 4150 Sqm for GE(West) Area |
| 20 | M&L PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in roof kerbs /padding /benching or mud stops, and platform for mounting service tanks, rounded, chamfered on edges including necessary use and waste of from work etc complete all as specified and directed. (a) 120 Cum for GE(East) Area (b) 225 Cum for GE(West) Area Please Enable Macros to View BoQ information |
| 21 | M&L PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in roof kerbs /padding /benching or mud stops, and platform for mounting service tanks, rounded, chamfered on edges including necessary use and waste of from work etc complete all as specified and directed. (a) 120 Cum for GE(East) Area (b) 225 Cum for GE(West) Area Please Enable Macros to View BoQ information |
