|
| 1 | Taking down cement plaster on brick or stone walls/ceiling etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specfied and as directed by Enginer-in-charge |
| 2 | Material and labour for rendering 10mm thick on brick work or concrete surfaces in cemet mortar 1:6 finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. |
| 3 | Material and labour for rendering 5mm thick as on ceilings or concrete surfaces in cemet mortar 1:3 finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. |
| 4 | Material and labour for rendering 15mm thick on brick work or concrete surfaces or on chajjas / parapet walls etc in cemet mortar 1:4 mixing with liquid water proofing compound as per manufacturer's instructions finished even and fair without using extra cement including fixing of chicken wire mesh where directed complete all as specified and as directed by Engineer-in-Charge. Note: Liquid water proofing compound and Chicken wire mesh shall be measured and paid as supply only separately |
| 5 | Supply only integral liquid water proofing compound complete all as specified and as directed by Engineer-in-Charge. |
| 6 | Material and labour for complete removal of existing treatment of any type / description from ceilings /RCC surfaces etc with mechanical means/grinder complete all as specified and as directed by Engineer-in-Charge. |
| 7 | Material and labour for complete removal of existing treatment of any type / description from walls/RCC surfaces etc with mechanical means/grinder complete all as specified and as directed by Engineer-in-Charge. |
| 8 | Materia and labour for prepration of new plastered surface of walls and applying two coats of oil bound distamper white or tinted over and including a coat of primer complete all specified and directed by Engineer-in-Charge. |
| 9 | Materia and labour for prepration of old plastered surface of walls and applying two coats of oil bound distamper white or tinted over and including a coat of primer complete all specified and directed by Engineer-in-Charge. |
| 10 | Material and Labour for exterior painting work including complete removal of existing loose paint layers till plaster level by using jet pressure washer and crack filling up to 3mm by using crack seal & up to 10mm by using textured crack filler. Application of one coat of SmartCare waterproof primer (Damp Prime Suprema) on walls and Chajjas with 10% of dilution of water and applying two coats of 100% acrylic smooth emulsion exterior grade with silicon additives having anti-algal and Dust pickup resistance properties, Material should be applied (Dilution, Recoating period etc..) as per manufacturer instructions by using fully automatic air less spray machine having flow speed of minimum 1ltr per minute and pressure of 3300 PSI. (Apex Ultima Suprema). |
| 11 | Material and labour for preparation of newly plastered/unplastered external walls / RCC surfaces / soffits of chajjas /roof projections /cantilevers/balcony etc and applying two coats of exterior emulsion weather proof paint (light shade) @ 5 sq.m/litre/2 coats by using roller to over & including a coat of exterior wall primer @ 10 sq.m/1.43litre/1 coat complete all as specified and as directed by Engineer-in-Charge. |
| 12 | Material and labour for preparation of new plastered surfaces of ceiling and applying three coat of white wash on ceiling complete all as specified and as directed by Engineer-in-Charge. |
| 13 | Material and labour for preparation of old plastered surfaces of ceiling and applying two coat of white wash on ceiling complete all as specified and as directed by Engineer-in-Charge. |
| 14 | Supply and apply of rust remover cum passivator by brush in two coat @ 0.3 kg/m2/coat of Density: 1.01 Kg/l at 300C complete all as per manufacturer's instructions compete all as specified and as directed by Engineer-in-charge .Note : The application of rust removal shall be got done through the authorised applicator of manufacturer of membrane only all as specified and directed.Make/Product: Sika Rustoff 100 or equivalent from Fosroc |
| 15 | Supply and apply Cementitious Coating for Corrosion Protection having a cement based polymer modified rebar corrosion protection system by appling the first coat approx. 1mm thick layer of product carbonation resistance 2 mm of SikaTop Armatec®-108 or equivalent as specified corresponds to 20 mm of normal mortar; bond strength > 1N/mm2 according to ASTM C 882-78 applying @ 4 kg/m2 for two coats onto the prepared reinforcing steel with a medium- stiff brush. It is unavoidable that Sspecified product will also be applied onto the surrounding concrete. The second coat is applied in the same way after a waiting time of 2-3 hours (at +20°C) complete all as per manufacturer's instructions and all as specified.Note : The application of Cementitious Coating for Corrosion Protection shall be got done through the authorised applicator of manufacturer of membrane only all as specified and directed.Make/Product: SikaTop®-Armatec-108 or equivalent from Fosroc |
| 16 | Providing, mixing & applying two component Epoxy resin concrete Bonding coat on prepared RCC surfaces as per manufacturer's specification including prepartaion of surface by chipping and throughly cleaning of surface complete whereever required and as per directions of Engineer-in-charge.Consumption: 0.5 kg/m2. complete all as per manufacturer's instructions and all as specified.Product requirements: Complies with ASTM C 881 Type II Grade 2 Class B+C.Note : The application of Epoxy Bonding Primer shall be got done through the authorised applicator of manufacturer of membrane only all as specified and directed.Product: Sikadur®-32 LP or equivalent from Fosroc |
| 17 | Supply and apply a pre-batched one component polymer modified cementitious patch repair mortar in 25 mm thickness.Yield: approx. 0.84 ltr/kg.System requirements: compressive strength >= 50 N/mm2 (28 days) according to ASTM C 109; flexural strength >= 3N/ mm2 (7 days) according to ASTM C 293-79.Consumption of 2.1 Kg/Sqm/mmNote : The application of Polymer repair Mortar shall be got done through the authorised applicator of manufacturer of membrane only all as specified and directed.Product: SikaTop®-122 HS or equivalent from Fosroc |
| 18 | Material and labour for Taking down cement plaster from brick work or RCC surface and proper cleaning the surace with water and making efflorescence treatment by applying two layer of fastflex Dr. fixit (Pidilite co.) over brick surface and including finally apply 15 mm thick plastering cement mortar in 1.3 with mixing of (URP 301) over treated surfaces and Applying 3mm thick wall care putty applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed by Engineer-in-Charge. |
| 19 | Material and labour for taking down cement plaster from brick work or RCC surface and proper cleaning the surace with water and making efflorescence treatment by applying two layer of fastflex Dr. fixit (Pidilite co.) over brick surface and including finally apply 10 mm thick plastering cement mortar in 1.6 with mixing of (URP 301) over treated surfaces and preparation of new surface of wall applying 3mm thick wall care putty and two or more coats of oil bound distamper white or tinted over a coat of primer on plastered surface of walls complete all as specified and directed by Engineer-in-Charge. |
| 20 | Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and as directed by Engineer-in-Charge. |
| 21 | Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and as directed by Engineer-in-Charge. |
| 22 | Supply and fixing Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing , supply & fixing in opening as per specification & drawing complete all as specified and directed by Engineer-in-Charge. |
| 23 | Supply and fixing factory made single extruded WPC (Wood Polymer Composite) solid door Frame/Chowkhat of size 125 x 65 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and as directed by Engineer-in-Charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 24 | Supply and fixing factory made double extruded/rebated WPC (Wood Polymer Composite) solid door Frame/Chowkhat of size 150 x 65 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and as directed by Engineer-in-Charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 25 | Supply and fixing factory made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 5mm thick Moulded PVC Sheet on the front face & 5mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification colour wood colour including necessary stainless steel fittings and fixtures with suitable PVC sheet beading & jointed together with solvent cement supply & fixing in the frame at site as per specification & drawing complete all as specified and as directed by Engineer-in-Charge.. |
| 26 | Supply and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and directed by Engineer-in-Charge. |
| 27 | Supply and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type plain wiremesh door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk)and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. For fixing stainless steel 304 Grade wire cloth (wire dia. 0.56mm) and Expanded aluminium mesh, wire dia 1.20 mm thickness and mesh aperture size 38x20mm (LWxSW) combinly panel panel area of door excpet stiles and rail to be panelled with mesh wih self tapping round headed screws at requried distance,scres and edges covered with feathered pvc edge beading all round of mesh and WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screwscomplete all as specified and directed by Engineer-in-Charge. |
| 28 | Supply and fixing , mild steel ordinary rat tail rod pattern springs of size 300mm including roller and roller plate including necessary welding for fixing to door frame complete all as specified and as directed by Engineer-in-Charge. |
| 29 | Supply and fixing 150 mm size Stainless Steel (304 Grade) Butt hinges complete all as specified and directed by Engineer-in-Charge. |
| 30 | Supply and fixing 100 mm size Stainless Steel (304 Grade) Butt hinges complete all as specified and directed by Engineer-in-Charge. |
| 31 | Supply and fixing aluminium anodised barrel tower bolt 150 mm long of extruded section complete all as specified and directed by Engineer-in-Charge. |
| 32 | Supply and fixing 150 mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed by Engineer-in-Charge. |
| 33 | Supply and fixing floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring,fixed in floor with overall length of cover plate150 mm complete all as specified and directed by Engineer-in-Charge. |
| 34 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided forcomplete all as specified and directed by Engineer-in-Charge. |
| 35 | Material and labour for reinforced cement concrete 1:1.5:3 type A-1 (using 20 mm graded stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings,balconies, canopies,deck slabs and in shelves and the like.complete all as specified and directed by Engineer-in-Charge. |
| 36 | Material and labour for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landing, shelves and similar work not exceeding 200mm thick, Horizontal or slopping for rough finished suface of concrete complete all as specified and directed by Engineer-in-Charge. |
| 37 | Material and labour for form work to edges of concrete flats, treads, breaks in floors, window cills floor or and roof n, exc 20 cm wide and sides of RCC band in walls, horizontal or sloping and similar work exc 10 cm but n, exc 20 cm wide for rough finished surface of concrete complete all as specified and directed by Engineer-in-Charge. |
| 38 | Material and labour for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge. |
| 39 | Material and labour for Mild steel bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge. |
| 40 | Material and labour for reinforced cement concrete 1:1.5:3 type A-1 (using 20 mm graded stone aggregate) in chajjas, chulla hoods etc complete all as specified and directed by Engineer-in-Charge. |
| 41 | Material and labour for flat formwork to chullah hoods,chajjas,troughs and similar items incuding edges for rough finished surface of concrete complete all as specified and as directed by Engineer-in-charge.Note :- The quoted rates include scaffolding/ladders etc as required up to 12 m bldg height, |
| 42 | Dismantling of brick or terracing tiles of single layers on roofs and removed from site complete all as specified and as directed |
| 43 | Demolition of Mud in roofs, any thickness, including plastering and leeping (whether full thicknes removed or only a part thereof) and removing the demolished material out of MD land complete all as specified and as directed. |
| 44 | Material and labour for wire brushing and cleaning top surface of RCC roof including flashings and junction of parapets, etc.complete all as specified and as directed. |
| 45 | Material and labour for cutting grooves in brick wall 75mm wide and 65mm deep, shaping horizontal face of groove with cement mortar 1:3 all as specified and directed. |
| 46 | Material and labour for cement concrete1:2:4, type B-0 (using 12.5mm graded stone aggregates) as in roof kerbs, benching, mud stops, steps, coping, hold fasts and the like slightly rounded or chamfered on the edges complete all as specified and as directed. |
| 47 | Material and labour for cement concrete 1:3:6 type C-0 (using 12.50 mm graded stone aggregates) as in padding over roof minimum thickness at khurra as 45 mm and maintain a slope of 1:100 complete all as specified and as directed. |
| 48 | Material and labour for cement concrete tiles with grey cement and no pigment 25cm x 25cm x 22mm thick, machine pressed; set jointed and pointed in neat cement slurry in floors, over roofs laid over and including 15mm thick screed bed of CM 1:6 and filling the joints with cement mortar 1:3 complete all as specified and as directed. |
| 49 | Demolition of cement concrete un -reinforced of any description and in any position complete all as specified. |
| 50 | Material and labour for plain cement concrete 1:5:10 mix, type E-2 (using 40mm graded stone aggregate) as in filling of sunken portion complete all as specified and directed by Engineer-in-chrge. |
| 51 | Material and labour for rendering 15 mm thickn on brick or concrete surfaces of wall of sunken portionin in cement mortar 1:3 , mixed with liquid water proofing compound as per manufacturers instructions,, trowelled even and smooth finish without using extra cement complete all as specified. Note : Liquid WPC shall be mesured and paid separately |
| 52 | Material and labour for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on a coat of bitumen primed surface applied @ 0.40 Ltr/Sqm by forced application complete all as specified.Make:- As approved consisting of a coat of bitumen primer @ 0.40 Ltr/Sqm by the same membrane manufacturer of density 0.87 to 0.89 Kg/Ltr at 25 degree C temperature and viscosity 70 - 160 cps Over the coat, the layer membrane shall be laid using butane torch and sealling all joints etc after the surface complete as per standard practice as per manufacturers instructions. |
| 53 | Material and labour for 25mm thick PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate to receive floor finishes complete all as specified and as directed by Engineer-in-Charge. |
| 54 | Supply and fixing 25 mm bore dia GI pipe medium grade as spouts 60 cm long complete all as speciied and directed by Engineer-in-charge. |
| 55 | Supply and fixing in repair stainless steel tubing of 25 mm dia chromium plated min. 1.0 mm wall thickness as in curtain rod complete incl S&F 02 Nos stainless steel brackets/finials fency type, stops fixed with ss screws etc complete all as specified and as directed by Engineer-in-charge. |
| 56 | Supply and fixed in repair brass chromium plated, tubular towel rail, 20mm dia, 60cm long between flanges complete all as specified and directed by Engineer-in-Charge. |
| 57 | Supply and fixing in repair stainless steel sink with drainage board, 1.00 mm thick, glossy finish, for kitchen with plugs washers and waste coupling of 32mm dia and including cantilever cast iron brackets, connecting union, etc, overall size 915mm x 460 / 928 mm x 458mm with bowl size 410 x 335 x185 mm /430 x 355 x 200 mm with wall connection pipe & wall flange and making good disturbed portion in CM 1:3 or PCC 1:2:4 complete all as specified and directed by Engineer-in-charge. |
| 58 | Material and labour for cement concrete type C-2, (1:3:6) using 40mm graded stone agrregate as in sub base of floors, in base for PVC tanks, in foundations , filling and mass concrete etc complete all as specified and directed by Engr-in-Charge. |
| 59 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and as directed by Engineer-in-Charge. |
| 60 | Material and labour for Granite 15-18 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plat forms, laid over and including 15 mm thick screed in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admix ture of pigment to match with shade of granite complete all as specified and as directed by Engineer-in-Charge. |
| 61 | Material and labour for Baroda green marble, 15-18 mm thick, (table rubbed and polished) machine cut, laid over & including 15 mm thick (average thickness) cement mortar (1:3) screed and bedded, jointed with grey cement slurry & pointed with grout of matching shade including rubbing and polishing (Granite finish), over cooking platform shelves , RCC counters, window cills & similar situations complete all as specified and as directed by Engineer-in-Charge. |
| 62 | Material and labour for baroda green marble, 15-18 mm thick, (table rubbed and polished) machine cut,, set and jointed in cement slurry over & including screed of 10 mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab complete all as specified and as directed by Engineer-in-Charge. |
| 63 | Material and labour for rounding the edges of stone (of any description) slabs one edge, such as in steps, cooking platform, and other similar situations including cutting, rubbing and polishing (mirror finish), complete all as specified and directed by Engineer-in-Charge. |
| 64 | Demolition of cement concrete un -reinforced in ground floors and pavings n.exc 15cm thickness complete all as specified and as directed. |
| 65 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.Brushing neat cement slurry with 3.0kg of cement per sq. metre complete all as specified and as directed by Engineerer-in-charge |
| 66 | Dismantling, floor, hearth or wall tiling including CM(bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete all as specified and as directed by Engineerer-in-charge |
| 67 | Material and labour for non skid ceramic coloured tiles, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as per the existing tiles and size as suitable/ matching with the existing tiles in floors etc. including set and jointed in neat cement slurr and ypointed in white or coloured cement to match the colour of tile laid over and including 15 mm thick screed bed in cemement mortar 1:4 complete all as specified. |
| 68 | Material and labour for Glazed ceramic coloured tiles of size 450x300 x 6 to 7 mm thick on vertical surface such as skirting/dado etc ,set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile laid over and including rendering 10 mm thick rendering in cement mortar 1:4 finished rough to recieve tiles complete all as specified and directed. |
| 69 | Material and labour vitrified ceramic light shade tiles 10 mm thick (square / rectangular) polished, area of each tiles n.exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick cement screed bedding layer in cement mortar 1:6 complete all as specified and directed. |
| 70 | Material and labour for vitrified ceramic light shade tiles10 mm thick (square / rectangular ) polished, area of each tiles n.exceeding 0.36 sqm, in dado/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over including 10mm thick rendering in cement mortar 1:4 on walls, finished even and rough to receive the tiles complete all as specified and directed. |
| 71 | Supply and fixing in repair brass chromium plated overhead shower 70mm dia with 250 mm long shower arm and including all necessary accessories for fixing completeall as specified by Engineer-in-Charge. |
| 72 | Supply and fixing in repair wall mixer telephonic assembly, brass chromium plated, comprising of centre outlet tap, double inlet for hot and cold water with connecting legs and wall flange fancy type suitable for 15 mm bore dia tubing complete all as specified and as directed by Engineer-in-Charge. |
| 73 | Supply and fixing in repair wall mixer telephonic assembly, brass chromium plated, comprising of centre outlet tap, double inlet for hot and cold water with connecting legs and wall flange fancy type suitable for 15 mm bore dia tubing complete all as specified and as directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
| 74 | Supply and fixing in repair wall mixer telephonic assembly, brass chromium plated, comprising of centre outlet tap, double inlet for hot and cold water with connecting legs and wall flange fancy type suitable for 15 mm bore dia tubing complete all as specified and as directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
