|
| 1 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (DSR ref. 8.31) |
| 2 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : |
| 3 | For fixed portion |
| 4 | Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) (DSR ref. 21.1.1.3) |
| 5 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) |
| 6 | Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) (DSR ref. 21.1.2.3) |
| 7 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. |
| 8 | With stainless steel cover plate minimum 1.25 mm thickness (DSR ref. 21.4.1) |
| 9 | Steel work welded in built up Sections/ Framed work. Including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works upto the height of 60' complete in all respect to the engineer-in-charge. (including two coat of enamel paint). NS |
| 10 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): |
| 11 | With float glass panes of 5 mm thickness (DSR ref. 21.3.2) |
| 12 | Providing and fixing of stainless steel kitchen sink of size 610mm x 460 mm without drainboard including cutting & matching good the walls wheras repair in any height including lead and lift complete in all respect to the entire satisfaction of the engineer-in-charge (NS) |
| 13 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1:00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. NS |
| 14 | P/F PVC connection 15mm dia 450mm to 600 mm long including all required material complete in all respect to the entire satisfaction of the Engineer-in-charge. NS |
| 15 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. |
| 16 | 15 mm nominal bore (DSR rf. 18.51.1) |
| 17 | Providing and fixing G.I Rain boxing 18 Gauge sheet (1.2 mm thick). complete as per direction of Engineer-in-charge.(Make- Tata) NS |
| 18 | Providing and fixing Grease trap of Stainless steel of capacity 350 ltr ( size as per decided by engineer in charge) complete in all respect. NS |
| 19 | Providing and fixing soil, waste and vent pipes : |
| 20 | 100 mm dia |
| 21 | Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 (DSR ref. 17.35.1.2) |
| 22 | Providing and fixing plain bend of required degree. |
| 23 | 100 mm dia |
| 24 | Sand cast iron S&S as per IS : 3989 (DSR ref. 17.39.1.2) |
| 25 | Providing and fixing collar : |
| 26 | 100 mm |
| 27 | Sand cast iron S&S as per IS - 3989 (DSR ref. 17.57.1.2) |
| 28 | First class burnt brick work laid in cement sand mortar 1:4 (1 cement : 4 coarse sand) with F.P.S bricks of class designation 100 (average compressive stregth not less than 105 kg per sq. cm.) in foundation and plinth complate in all respect to the entire satisfaction of the Engineer-in-Charge. (NS) |
| 29 | 15 mm cement plaster on the rough side of single or half brick wall of mix : |
| 30 | 1:4 (1 cement: 4 fine sand) (DSR ref. 13.2.1) Please Enable Macros to View BoQ information |
