|
| 1 | 630 KVA 11KV/0.4KV Distribution transformer level II losse, Copper Winding with Bimetallic Terminal Connectors, energy efficiency level-II as per IS1180(part)2014 |
| 2 | 11KV , 630 Amps, Outdoor, SF6 RMU with two LBS and one circuit breaker Extensible/ Non- Extensible Two (2) Motor operated load break switches (LBSs) with manual operated earthing switches in SF6 and one (1) vaccum circuit breaker with electrical closing & tripping along with disconnector & earthing switches SCADA Compatible and base channel. Battery charger along with batteries required for electrical operations of RMU is in the scope of the Bidder. Each module shall consist of VPIS, FPI in LBS module (N-1) but not less than 1 nos per RMU. Suitable arrangement for mounting FRTU, modem or Ether et Switch/LIU along with battery, Battery charger shall be provided in RMU |
| 3 | 11KV Metering Cubicle |
| 4 | XLPE 11KV, 3C x 300sqmm Aluminium Armoured HT Cable |
| 5 | XLPE 11KV, 3C x 95sqmm Aluminium Armoured HT Cable |
| 6 | XLPE Indoor heat shrinkable End termination kit suitable for 11KV, 3C x 300 sqmm, XLPE Aluminium Armoured cable |
| 7 | XLPE Indoor heat shrinkable End termination kit suitable for 11KV, 3C x 95 sqmm, XLPE Aluminium Armoured cable |
| 8 | HS 11 KV straight through joint, 3C x 300 sqmm, XLPE Aluminium Armored cable |
| 9 | Earthing complete with 40mm GI pipe 2.5mtr long along with 20kgs each salt, charcoal complete |
| 10 | GI Flat 50 x 6 mm |
| 11 | Fencing complete with gate as per specification for Distribution Transformer (Size 4m x 3m x 2m) with concreting for FRP Fencing supports with plinth (0.3x0.3x0.5) cu.m x 12 nos. Each ratio 1:3:6 |
| 12 | Excavation of trench of size 0.3X 0.9X60 meter in any type of soil including opening of road etc for laying of cable |
| 13 | Re-Filling of available excavated earth( Excludig rocks & stones) in trench, plinth sides. Foundations etc in layer not exceeding 0.2 mtrs depth consolidated each deposited layer by ramming and watering lead upto 25 mtrs. |
| 14 | Supply & laying of protective cover of size 600mm length x 250mm width x 50mm thick capable of bearing of load of 135 kgs and covered with earth /sand upto depth of 0.15 mtr confirming to IS 1255-1967 at non road crossing |
| 15 | Sand for cushioning of HT underground cables |
| 16 | Foundation Plinth for RMU, Transformer & Metering Cubicle |
| 17 | Liasioning Charges for preparation of files & Fesibility Reports,follow up from Electricity dept, Getting Approval from Electricity dept, Getting approval from MRT & Electrical Inspector,SE Inspection etc. |
| 18 | 630 KVA 11KV/0.4KV Distribution transformer level II losse, Copper Winding with Bimetallic Terminal Connectors, energy efficiency level-II as per IS1180(part)2014 |
| 19 | 11KV , 630 Amps, Outdoor, SF6 RMU with two LBS and one circuit breaker Extensible/ Non- Extensible Two (2) Motor operated load break switches (LBSs) with manual operated earthing switches in SF6 and one (1) vaccum circuit breaker with electrical closing & tripping along with disconnector & earthing switches SCADA Compatible and base channel. Battery charger along with batteries required for electrical operations of RMU is in the scope of the Bidder. Each module shall consist of VPIS, FPI in LBS module (N-1) but not less than 1 nos per RMU. Suitable arrangement for mounting FRTU, modem or Ether et Switch/LIU along with battery, Battery charger shall be provided in RMU |
| 20 | 11KV Metering Cubicle |
| 21 | XLPE 11KV, 3C x 300sqmm Aluminium Armoured HT Cable |
| 22 | XLPE 11KV, 3C x 95sqmm Aluminium Armoured HT Cable |
| 23 | XLPE Indoor heat shrinkable End termination kit suitable for 11KV, 3C x 300 sqmm, XLPE Aluminium Armoured cable |
| 24 | XLPE Indoor heat shrinkable End termination kit suitable for 11KV, 3C x 95 sqmm, XLPE Aluminium Armoured cable |
| 25 | HS 11 KV straight through joint, 3C x 300 sqmm, XLPE Aluminium Armored cable |
| 26 | Earthing complete with 40mm GI pipe 2.5mtr long along with 20kgs each salt, charcoal complete |
| 27 | GI Flat 50 x 6 mm |
| 28 | Fencing complete with gate as per specification for Distribution Transformer (Size 4m x 3m x 2m) with concreting for FRP Fencing supports with plinth (0.3x0.3x0.5) cu.m x 12 nos. Each ratio 1:3:6 |
| 29 | Excavation of trench of size 0.3X 0.9X60 meter in any type of soil including opening of road etc for laying of cable |
| 30 | Re-Filling of available excavated earth( Excludig rocks & stones) in trench, plinth sides. Foundations etc in layer not exceeding 0.2 mtrs depth consolidated each deposited layer by ramming and watering lead upto 25 mtrs. |
| 31 | Supply & laying of protective cover of size 600mm length x 250mm width x 50mm thick capable of bearing of load of 135 kgs and covered with earth /sand upto depth of 0.15 mtr confirming to IS 1255-1967 at non road crossing |
| 32 | Sand for cushioning of HT underground cables |
| 33 | Foundation Plinth for RMU, Transformer & Metering Cubicle |
| 34 | Liasioning Charges for preparation of files & Fesibility Reports,follow up from Electricity dept, Getting Approval from Electricity dept, Getting approval from MRT & Electrical Inspector,SE Inspection etc. Please Enable Macros to View BoQ information |
