|
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : GE 881 EWS C/O 56 APO NAME OF WORK: SPL REPAIR TO BLDG NO PT-119 AND T-21 ALONGWITH RETAINING WALL AT BG CONVOY GROUND UNDER AGE B/R-I OF GE 881 EWS. Contract No : GE/PNH-27/2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Rates only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sch. itemNo. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Rs. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Demolition of cement concrete (including floor tiles,kota stone flooring etc) (un-reinforced) of any description and in any position not otherwise specifically described complete all as directed by Engineer-in-Charge. |
| 3 | Taking down cement plaster,any description on brick or stone or cement concrete walls including raking out joints ,hacking for key, scrubbing down with water etc. complete all as specified and directed. |
| 4 | Dismantling floor, hearth, or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 5 | Taking down chowkhats or frames n. exc 1.5 Sqm but (without taking off shutters from frame) complete all as specified and directed. |
| 6 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) area exceeding 1.5Sqm and not exceeding 4Sqm each, complete all as specified and directed. |
| 7 | Taking up or down steel tubing of 15mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store with all fittings, complete all as specified and directed. |
| 8 | Taking up or down steel tubing of 20mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store with all fittings, complete all as specified and directed. |
| 9 | 1000 ltr capacity rotational moulded polyethylene water storage tanks, double layer(Cylindrical vertical with threaded close top), ISI marked and fixed in position, all as specified in SSR Part-I, including dismantling of old water tank of any description, complete all as specified and directed. |
| 10 | Dismantling of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work, complete all as specified and directed. |
| 11 | Dismantling wrought iron or mild steel work of any description not otherwise provided for angle iron pickets or fencing post or any discription etc,complete all as specified and directed. |
| 12 | 25 mm thick PCC 1:2:4 type B-0 (using 12.50mm graded crushed stone aggregate) as in sub base floor finishing surface even and fair,roof complete all as specified and directed. |
| 13 | 50 mm thick cement concrete (1:3:6), type C-2 using 40mm graded stone aggregate laid in alternate bays complete and finished the surface even & fair and providings joints through out the thickness of plinth protection filed with mastic filling comprising one part of 01 bitumen 85/25 grade and three part of sand by weight complete all as specified and directed. |
| 14 | Rendering 10mm thick on fair faces of brick work or concrete surfaces on walls in cement mortar 1:6 and finished the surface even and smooth without using extra cement, complete all as specified and directed. |
| 15 | Rendering 15mm thick on other than fair faces of brick or stone masonry wall surfaces in cement mortar 1:4 and finished the surface even and smooth without using extra cement, complete all as specified and directed. |
| 16 | Preparation of old plastered/ un-plastered wall surfaces including brooming down or steel wire brushing, scraping down, smoke soot, mould, moss, efflorescent salts, trading oil and greasy spots, and applying two coats of cement base paint on walls including cornices, pilasters etc, complete all as specified and directed. |
| 17 | Preparation of newly plastered or unplastered surface of wall and applying two coats of cement base paint over a coat of Primer complete all as specified and directed. |
| 18 | Preparation of newly plastered or unplastered surface of wall and applying two coats of Oil Bound Distemper (any tint) over a coat of primer including 2mm thick wall care putty complete all as specified and directed |
| 19 | Bathroom mirror cabinet plastic body white coloured, wall mounted of size 47.40x37.60x19.20cm, minimum wt 3.20kg, rectangular shaped complete all specified and directed. |
| 20 | Glazed ceramic coloured tiles (300x450x7mm) thick, as in vertical surfaces such as in skirting and dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10mm thick back coat layer in cement mortar 1:4, complete all as specified and directed by Engr-In-Charge. |
| 21 | Non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.11Sqm but n exc. 0.18Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 15mm thick screed bed in CM (1:4), complete all as specified and directed. |
| 22 | Vitrified Ceramic tiles 8 to 10 mm thick area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:4,complete all as specified and as directed by Engr-in-Charge |
| 23 | Description all as per item No 21 above but as in vertical surface in skirtings,dados including 10 mm thick back coat in CM 1:6,complete all as specified and as directed by Engr-in-Charge. |
| 24 | Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 25 | Factory made solid panel PVC door shutter 30mm thick(Stiles) consisting of frame made out of MS tubes for top and bottom rails. MS frames shall be covered with heat moulded plain coloured PVC,C, channel having PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame with 3 Nos stainless steel hinge 100 mm size, welded/sealed to the stiles rails with suitable PVC sheet beading and jointed together with solvent cement. S&F in the frame as per manufacturer's instructions complete all as specified and directed. |
| 26 | Aluminium anodised, barrel tower bolts of extruded section of size 200mm and fixed, complete all as specified and directed. |
| 27 | Mild steel pressed handles, oval type , stove enameled black of 150mm complete all as specified and directed. |
| 28 | Aluminium alloy butt hinges, medium weight, cold rolled,100mm long fixed, complete all as specified and directed. |
| 29 | Steel ventilators,part of both the fixed type with glazing bars and with top hung shutter including hinges,steel peg stay for the same opening complete all as specified and directed |
| 30 | Steel water tubing of 15 mm dia bore ‘medium grade’ galvanized with all fittings like socket, union, elbow, bend, tees etc fixed to walls and ceilings or laid in floors, complete all as specified and directed. |
| 31 | Steel water tubing of 20 mm bore ‘medium grade’ galvanized with all fittings like socket, union, elbow, bend, tees etc fixed to walls and ceilings or laid in floors, complete all as specified and directed. |
| 32 | S & Fixed in repair Vitreous china, wash down water closet pan (pedestal pattern), white, including plastic water closet seat cover, closed pattern with flat bottom and hinging device, connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe etc, complete all as specified and directed. |
| 33 | S&F in repair wash basin, Vitreous China (flat back or angle back type) of size 550 x 400mm including cutting for and pinning in ends of brackets or erecting stand excluding waste pipe as specified and directed. |
| 34 | S&F in repair PVC valve less, symphonic action type flushing cistern 10 ltrs capacity low level, with inlet, ball valve float, flush pipe and handle including brackets complete all as specified & directed. |
| 35 | S & F in repair Bib taps 15mm bore of cast copper alloy chromium plated fancy type, screwed down, high presure with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferrule, fixed, complete all as specified and directed. |
| 36 | Supply & fixed in repair, 15mm bore Stop valve cast copper alloy chromium plated fancy type and cup (concealed type) screwed down high pressure with crutch or butter-fly handle, screwed both ends for iron pipes or for union,complete all as specified and directed. |
| 37 | S & F in repairs two way Stop/angle cock 15 mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle sewed both ends for iron pipe or for unions complete all as specified and directed |
| 38 | S&F in repairs Health Faucet ABS with Rabbit Cleaning System , 1.25 m Long CP Flexible Tube & ABS Wall Hook comlete all as specified and directed. |
| 39 | S & F in repair Stainless Steel Wall Mounted Case with Soap Holder & Brush Holder fixed to wall all as specified and directed by Engr-in-Charge. |
| 40 | S&F in repair 600x450 mm size and 5.5mm thick looking mirror, bevelled edge of selected quality glass with aluminium frame made of channel alround, mounted on 6 mm thick commercial ply or AC building board, fitted to wooden plug with CP screws, complete all as specified and directed. |
| 41 | S&F in repair chromium plated brass wall mixer fancy type with provision for overhead shower complete with wall flange (excluding over head Shower) screwed down for 15 mm GI bore pipe complete all as specified and directed. |
| 42 | S&F in repair Brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union all as specified and directed |
| 43 | S&F in repair 20mm dia brass chromium plated tubular towel rails, D type, 60cm long between flanges, complete all as specified directed. |
| 44 | S & F in repairs flexible waste pipe for wash hand basin fitted to Wash Hand Basin incl all necessary brackets etc all as specified and directed by Engr-in-Charge. |
| 45 | S&F in repair PVC connection 15mm size with PTMT nuts on both ends of length 600mm fixed, complete all as specified and directed. |
| 46 | S&F in repair waste coupling of PTMT (half or full threaded) (Minimum weight 32mm-45gms) for 32mm bore dia of discharge pipe to WHB, sink fixed in repairs, complete all as specified and directed. |
| 47 | S&F in repair Wall mounted corner glass shelf assembly consisting of 5.5mm thick sheet glass shelf of 12cm wide with cromium plated bracket guard and railing 60cm long and fixed in position complete in all respect as specified & directed. |
| 48 | S&F in repair Tank nipple 20mm dia suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm 45gms /25mm- 65gms) complete all as specified and directed |
| 49 | S&F in repair 20mm bore gun metal globe or gate valve (ISI marked) with iron wheel head,screwed both ends for iron pipe fixed in repair complete all as specified and directed. |
| 50 | S&F in repair 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight - 210 gms) fixed in repairs, complete all as specified and directed. |
| 51 | PVC (SWR) floor trap, plain with grating including jointing with solvent cement, 75 diameter of outlet,complete all as specified and directed. |
| 52 | PVC (SWR) bends any radius 75mm bore fixed, complete all as specified and directed. |
| 53 | PVC (SWR) bends any radius 110mm bore fixed, complete all as specified and directed. |
| 54 | PVC (SWR) pipes, Type-B, 75mm dia any length single socketed with rubber ring joint, laid in trenches/floors as soil pipe, fixed in repair, complete all as specified and directed. |
| 55 | PVC (SWR) pipes, Type-B, 110mm dia any length single socketed with rubber ring joint, laid in trenches/floors as soil pipe, fixed in repair, complete all as specified and directed. |
| 56 | Supply only liquid water proofing admixture. |
| 57 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof covering, all as specified and directed. |
| 58 | Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws as specified and directed by Engineer- in Charge. |
| 59 | Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws as specified and directed by Engineer- in Charge. |
| 60 | Steel framed work as in hollow tube or tubular trusses, purlins, vertical pole or post for sheds including special shaped washer etc. complete using ERW or induction butt welded tubes confirming to IS 1161-1979, Grade St 240 complete all as specified and directed. |
| 61 | 15mm bore pillar tap cast copper alloy with capstan head, fancy type, chromium plated, screwed down, high pressure, with or without lettered 'Hot or Cold' with long screwed for iron pipe fixed in repair complete, all as specified & directed. |
| 62 | Vitreous china urinals, bowl type of size 465x355x265mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern and waste pipe),complete including poviding and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing with automatic flushing cistern with brackets, flush pipe, waste pipe grating and union for discharge pipe, fixed in repair complete all as specified and directed. |
| 63 | Brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius, built in cement mortar 1:6, all as specified and directed. |
| 64 | 35mm thick 2nd class hard wood plain, framed, panelled door shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of 12mm thick veneered particle board medium density, wood particle board with commercial face veneers, complete all as specified and directed. |
| 65 | 35mm thick 2nd class hard wood Glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass etc. size of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified & directed.. |
| 66 | Factory made pressed steel frames of size 125x60mm made out of PBI sheet 1.25 mm thick for doors with one or more rebates including necessary fixing lugs, hinge,lock strike plate etc.complete including bottom of each chowkat to be welded with 02 Nos 25x3mm thick Flat iron projecting 10cm on either side & tarring back of chowkats and hold fasts complete all as specified & directed. |
| 67 | 300mm long aluminium alloy anodized sliding door with haps, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified & directed. |
| 68 | Stainless steel wire cloth 0.71mm nominal dia of wire and average width of aparture 1.20mm and fixed with tinned tacks or stainless steel wire staples, complete all as specified & directed. |
| 69 | Preparation of new wooden surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint of Ist quality over a coat of pink primer,complete all as specified & directed. |
| 70 | Applying two coats of synthetic enamel paint of Ist quality over a coat of red oxide zinc chrome primer to new or previously untreated steel surfaces over 10cm width or girth including preparation of surfaces, complete all as specified and as directed. |
| 71 | Preparation of old painted steel surfaces of any description, over 10cm width or girth and applying two coat of synthetic enamel paint in, complete all as specified and directed. |
| 72 | Providing and fixing of double rebate openable and fixed windows made of galvanized steel colour coated/powder coated (base steel as per IS 513 of “D\\" quality, galvanized as per IS 277 with zinc of 120 grams/sqm) with total thickness of coating 0.58 mm, primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns thick, outer frame section 72 x 55 mm, centre mullion section 72 x 50 mm, shutter section 47 x 20 mm,fly mesh section 40 x 20 mm and the fixed glass beading section 12 x 12 mm, outer frame and mullions shall consists rebate for glazed shutter, fly mesh and 20 mm provision for guard bars/grills, the sections cut to length mitre joined with corner bracket, centre mullions fixed with mullion cap, stay, handles, latch, 2 Nos of heavy duty stainless steel pivot hinges per shutter and panelled with 5mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade), fitted using EPDM (Ethyl Propylene Diamine Monomer) gaskets including fixing windows in the concrete/masonry wall by means of self-expanding screws, including 10mm Square bars welded to 6x12mm flat at a distance 150mm c/c (pitch) etc. complete as per the direction of Engineer in Charge. |
| 73 | All as per item No 71 above but single rebate ventilators etc. |
| 74 | Stainless steel decorative curtain rod 25mm dia with decorative head on both end of rod and necessary clamps / fixing brackets, stops, rollers etc complete all as specified and as directed. |
| 75 | False ceiling calcium silicate fissured pattern semi perforated butt edge ceiling tiles , of size 600mm x 600mm x 6mm thick having thermal conductivity K=0.15 W/mOK, having fire performance (BS-476) fixed with and including grid system hot dipped galvanised steel section, exposed surface with pre-coated capping, main tee of size 24 x 38 mm, having 0.25mm gauge at every 1200 mm centre to centre maximum and rotary stitched cross tee of size 24 x 38 mm having 0.25 mm gauge at every 600mm c/c and sub cross tee of size 24 x 38mm, having 0.25 mm gauge at 1200 mm c/c and wall angle of size 19 x 19mm, having 0.35mm gauge fixed to the periphery of the wall and suspended with hangers at every 1200 mm c/c in both directions using 4.0mm dia pre-straightened GI wire fixed with suitable cleats and fastners complete all as specified and directed.. |
| 76 | S&F, in repair mild steel helical door spring 300mm long stove enameled black incl roller and roller plate complete fixed with screws to wooden frames or with welding to steel frames complete all as specified and directed. |
| 77 | Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work, complete all as specified and directed. |
| 78 | Earth work in excavation by mechinal means (Hydraulic excavator ) means not exceeding 1.50 m depth including getting out in any type of soil and disposal of excavated earth upto 50 m and lift upto 1.5 m as directed by Engr-in Charge. |
| 79 | Earth work in excavation by mechinal means (Hydraulic excavator ) means over areas exceeding 30 cm depth ,1.5m in width as well as 10 sqm in plan including getting out in any type of soiland disposal of excavated earth upto 50 m and lift upto 1.5 m as directed by Engr-in Charge in all type of soil. |
| 80 | All as per item No 78 above but exc 1.50m but not exc 3.00m in depth |
| 81 | Plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundations filling,sub base and mass concrete, complete all as specified and directed. |
| 82 | Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm, in any type of soil, complete all as specified and as directed. |
| 83 | Removing excavated material (soil) exceeding 250m and not exceeding 500m depositing where dircted at a level not exceeding 1.50m above the starting point, all as specified and directed. |
| 84 | PVC (SWR) pipes 75mm dia any length single socketed with rubber ring joint fixed in repairs, to walls as soil pipe with & including clamps, complete all as specified and directed. |
| 85 | RCC M-30(design mix) using 20mm graded crushed stone aggregate as in foundations including rafts, footings, foundation beams, plinth beams, bases of columns etc. complete all as specified and directed by Engineer-in-Charge. |
| 86 | RCC M-30(design mix) using 20mm graded crushed stone aggregate as in wall, retaining wall, basement wall, blast walls and the like, any thickness above top of footings including attached pilasters and buttresses, complete all as specified and directed |
| 87 | Steel form work to sides of concrete foundations, footings, rafts and raft beams sides and soffits of foundation and plinth beams and similar work for flat, rough finished surfaces all as specified |
| 88 | Steel form work to faces of walls, retaining walls, abudments, parapits and staircase railings and similar work including attached pillasters,buttresses etc vertical or to better with fair finished surface of concrete complete all as specified & directed |
| 89 | TMT bars, 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally or hooping for column, hooking ends and binding with and including mild steel wire(annealed) not less than 0.90mm dia complete all as specified directed. |
| 90 | 40-100mm aggregate filling dry, handpacked tightly, as in wire crate apron bunds complete all as specified and directed. |
| 91 | 20-40mm aggregate filling dry, handpacked tightly, as in wire crate apron bunds complete all as specified and directed. |
| 92 | Coarse sand as in stem filter complete all as specified and directed |
| 93 | Pre moulded bitumen impregnated fiberboard (50mm thick) conforming to to IS 1838 (Part-I) in expantion joints including cutting to shape fixing in position with sealent and finishing the surface complete as per direction of Engr-in-Charge. |
| 94 | Expanded metal, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members complete all as specified and directed. |
| 95 | Cement concrete 1: 3 :6 Type C1 using 20mm graded aggregate as in surface channels and drains including necessary form work if any required complete all as specified and directed |
| 96 | Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement complete all as specified and directed. |
| 97 | Demolition of RCC of any description and in any position not otherwise specifically provided for (rienforcement cut as required to facilitate demolition) all as specified and directed. |
| 98 | Taking up/down drain pipe, vent pipe, soil waste pipe (salt glazed ware, AC, PVC or reinforcement concrete) of size 100/110mm set in cement mortar/concrete from walls / trenches, complete all as specified and directed. |
| 99 | Excavation in trenches n.exc 1.50m wide and n.exc 1.50m in depth for foundation etc. and getting out in any type of soil, complete all as specified and directed. |
| 100 | RCC pipes class NP2 150mm dia bore in trenches and jointed with cement in any length, laid in trenches or in floor in repair complete all as specified and directed |
| 101 | M&L for PCC 1:3:6 Type C2 (20mm graded aggregate) as in concrete bed to drain pipe 150mm bore including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and directed. |
| 102 | Precast cement concrete 1:2:4, type-B1 (using 20mm graded crushed stone aggregate) as in landings, cover slab (for manholes etc), chullah hoods, chajjas, water troughs, shelves and similar articles with plain fair faces including chamfers, weatherings, throating etc. and setting in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge. |
| 103 | PCC (1:2:4) type B-1 using 20 mm graded crushed stone aggregate in surface channels and drains complete all as specified and directed. |
| 104 | Construction of on site LLDPE septic tank ISI marked, designed to carry sewage and sullage water,comprising earth work, excavation, returning filling in,disposal of surplus spoils to a distance n.exc 50 mtr from starting point in any type of soil, PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregates) in foundation, 200mm thick, vent shaft,connections etc. for 20 users, including all fittings, fixtures, testing on completion complete all as specified and directed. |
| 105 | Construction of soakage well of size 1.8 M dia X 3.0 M effective depth with including excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM 1:4, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats complete all as specfied and shown on drawing No. CEUZ/TD/1585/2021(SH 1/4 TO 4/4). |
| 106 | E/M PORTION:-Taking down carefully copper/ aluminium unserviceable/ perished point wiring with casing caping (light, fan, socket or power complete) including fixture and fittings such as switches, ceiling roses, pandents, regulators, sockets, light fittings,removing material from site and making good disturbed surfaces of wall, floors, complete all as specified and directed. |
| 107 | Point wiring on wall/ surface in PVC casing caping of size 20mm complete with 1.5 Sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed cable 1100 volts grade drawn through including PVC casing caping and provisining of 1.5 sqmm FRLSH PVC insulated unsheathed cable 1100 volt grade with multi stranded copper conductor to common earth and connected to earth dolly with sunken type pressed steel/welded MS terminal boxes made out of 1.6 mm MS sheet, 3mm thick laminated sheet top cover for mounting of fittings,switches, sockets outlets,regulators etc complete One light/Fan point controlled by one switch 5 amp one way complete all as specified and directed. |
| 108 | All as per item No.106 but One 3 pin 5 Amps socket point controlled by one switch on same board. |
| 109 | All as per item No.106 but One 3 pin 5 Amps socket point controlled by one switch on independent board. |
| 110 | All as per item No.103 but point wiring with 2.5 sqmm single core multi stranded copper conductor FRLSH PVC insulated & unsheathed cable 1100 volt grade and 2.5 sqmm FRLSH PVC insulated and unsheathed cable 1100 volt grade with multi stranded copper conductor for earth wire for 15/16 amp multi purpose socket combination point on independent board. |
| 111 | Submain wiring with 2 runs of copper conductor FRLSH PVC insulated unsheathed cable 1100 volt grade 4 sqmm drawn through PVC casing caping 25mm dia ISI marked as per IS specification fixed on wall/ceiling including conduit and conduit accessories and incl provn of PVC insulated 4 Sqmm FRLSH multistranded copper conductor as earth continuity conductor connected to earth dolly all as specified including dismantling old and making good to the disturbed surface by plastering and two coat of distamper all as directed at site Note : Two runs of 4 sqmm cable alongwith one run of 4 Sqmm PVC insulated unsheathed copper conductor as earth wire, conduit and conduit accessories will be measured as one length complete all as specified and directed. |
| 112 | Switch piano flush type 6 Amp single pole one way, (ISI marked), complete all as specified and directed. |
| 113 | Socket outlet multipurpose combination 2 in 1, 3 pin, 6 Amp flush type universal,complete all as specifed and directed. |
| 114 | Switch piano flush type single pole, one way 15 amp complete all as specified and directed . |
| 115 | Socket outlet multipurpose combination 2 in 1, 3 pin, 15 Amp flush type universal,complete all as specifed and directed. |
| 116 | Ceiling rose 65x50mm three terminals 230 volt complete all as specified and directed. |
| 117 | Step type fan regulator electronic type in 5 step, 100 watt capacity switch/socket type complete all as specified and directed. |
| 118 | Lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings, complete all as specified and directed. |
| 119 | Inverter LED Lamp, CDL, 10/12 watt, B22 base all as specified and as directed. |
| 120 | Inverter LED light fittings, 1x20 w LED, 230 V complete with all accessories internally per wired including lithium Ion battery with charging time 8-10 hours and back up time upto 4 hours and connecting up with PVC insulated and sheathed, 1100 v grade, flexible, multistranded copper conductor three core cable complete all as specified directed. |
| 121 | Ceiling mounting LED light fittings luminaire 600mmx600mm, 35/36 watt, 220 v, AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver , holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor of suitable size complete all as specified and as directed. |
| 122 | LED tube light fittings mirror type with high out put diffuser 2 feet , 10 watt 220 volt AC decorative box type with driver and connecting up with three core flexible copper conducor cable of suitable size from ceiling rose complete all as specified and directed. |
| 123 | Sheet metal enclosures for MCB distribution board 230 Volts single pole and neutral 12 way double door type flushed inside the wall with 200 Amp rated bus bar incl making the surface good complete all as specified and directed. |
| 124 | MCBs SPN 63 amp B curve 240 Volts 10 KA finger proof terminal, bi-connect termination, label holder, 35 mm² terminal capacity, insulated sliding shutter, large two position dolly, ISI marked to be fixed on DB complete all as specified and directed. |
| 125 | MCBs SPN 40 amp B curve 240 Volts 10 KA finger proof terminal, bi-connect termination, label holder, 35 mm² terminal capacity, insulated sliding shutter, large two position dolly, ISI marked to be fixed on DB complete all as specified and directed. |
| 126 | MCBs SP 5 to 32 amp B curve 240 Volts 10 KA finger proof terminal, bi-connect termination, label holder, 35 mm² terminal capacity, insulated sliding shutter, large two position dolly, ISI marked to be fixed on DB complete all as specified and directed. |
| 127 | Providing,opening and grouting the nuts and boults for fixing of exaust fsn in wall incl civil work as required on site and making the good disturbed surface as per existing specification to match complete all asspecified and directed. |
| 128 | Exaust fan,steel body AC single phase,230v of size 300mm sweep with blades, frame and louvers complete all as specified and directed. |
| 129 | Taking down ceiling fan, sealing cable end, dismantling blades and removing fan and blades, complete all as specified and directed by Engineer-in-Charge. |
| 130 | Rewinding the ceiling fan 1200mm Sweep with the same gauge of copper winding wire as well as number of turns and reassembling the fan after replacing the unserviceable spares like bushes, shafts, fasteners, bearings, capacitors and flexible cord for putting fan in serviceable condition including refixing the same after carrying out necessary repairs to original place all as specified and directed by Engineer-in-Charge. |
| 131 | Painting of ceiling fans and writing of MES No on fans in situ with synthetic enamel paint by spraying incl filling cavities with filler, one coat after cleaning all dust etc, complete all as specified and directed by Engineer-in-Charge. |
| 132 | Ceiling fans complete with three blade, down rod, accessories 230V, 1200mm sweep, BLDC fan with 5 star rating including fan refulator complete all as specified and as directed. |
| 133 | Electric water heater,storage type steel body with inner tank and heating element upto 1.5 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete all as specified and directed. |
| 134 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sqmm 4 core complete all as specified and directed. |
| 135 | Removing excavated material (soil) not exceeding 50m and deposition where dircted at a level not exceeding 1.50m above the starting point, all as specified and directed. |
| 136 | Supply and laying sub class `B` bricks laid dry flat transversely along the length of cable with width equal to the length of bricks over sand cushioning as protection cover of cable laid, complete all as specified and directed. |
| 137 | GI pipe light grade 50 mm bore for cable protection fixed on poles or laid in trenches, under floor, ducts etc with fixing clamps, nuts bolts etc complete all as specified and directed. |
| 138 | Cutting through existing bituminous road/pcc/floor/approx size width 15cmx60cm depth alongcross section of the road for laying of LT cable and repairing the road to match with the original finish complete all asspecified and directed. |
| 139 | MCCB 63 Amp, 4 pole 16 KA with adjustable thermal release fixed magnetic protection complete all as specified and directed. |
| 140 | Bus bar chamber of size 600x600x450mm suitable of 3 phases 433V outdoor type fabricated out of 3.15mm thick MS sheet with 300A rated aluminium bus bar 4 Nos, PVC sleeves (coloured red, yellow, blue and black) with suitable looking arrangements and fourr legged angle iron stand made of angle iron of size 40x40x6mm duly grouted in and including foundation in PCC 1:2:4 type C1 using 20 mm graded stone aggregates alongwith all necessary cable connections, lugs and cable glands including applying two coats of synthetic enamel paint (of approved tint) over a coat of red oxide zinc chrome primer complete all as specified and directed. |
| 141 | Energy efficient LED light fitting, 45W, input voltage 110V to 280VAC, 50Hz with ingress protection IP 66, LM 80, stranded luminries with efficiency 100 lumen/watt, with secondary optics, perfectly matched lenses, complying to IEC60598/IS10322, with auto shut down on high voltage, CRI>70, PF>0.95, with short circuit & reverse circuit protection against 10 kV high surges, minimum 25000 burning hours (life), operating temperature 1 to 50 degree Celcius , rectangular shape with pressure die cast aluminium housing with weather proof gasket for lamp and driver compartment with system wattage of 45W=10%W, rated lumens, 120 degree view angle, constant current type driver having THD<10%, including all fixing arrangement like clamps, nuts, bolts, washers, 45W LED rod lamp (having PF>0.9, input voltage 90-300V, IP-66, LM80) with all accessories pre-wired and connecting with twin core twisted flexible copper conductor cable with all necessary staging, etc including bracket complete all as specified and directed. |
| 142 | Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level,the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15cm on all side and including connected toand including galvanized earth lead strip 25 x 4 mm size upto 7.5 mtrs long by means of nuts and bolts, check nuts and washers of GI and connected to earhing test point and earth dolly all as shown in electrical plate No 3 of MES SSR part I and testing on completion including necessary excavation and earth work in any type of soil,PCC(1:3:6)type C1 chamber,pre-cast RCC slab 50mm thick in cement concrete (1:2:4),type B1,reinforced with welded steel wire fabric or XPM,(weight not less than 4 Kg per Sqm) with cast iron frame,funnel with watering pipe 20mm dia medium grade,wire mesh and lugs,GI protection pipe,40mm dia,light grade,7.5 mtr long for protection of earth lead upto test point etc all as specified and as directed. |
| 143 | Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 m below ground level) with top edge of the earth plate not less than 1.5 m below ground level, connected to GI earth wire 4mm dia by means of bolts, nuts,check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of SSR Part-I, connected to earth test point all as specified or indicated including excavation and connected earth work in soft / loose soil, P.C.C 1:3:6 type C-1 as in pit, 20mm dia GI pipe medium grade for watering pipe, 15mm bore GI medium grade earth lead protection pipe, 50mm thick R.C.C. 1:2:4 type B-1 cover slab of earth pit reinforced with 8mm dia TMT bars @ 10cm C/C both ways and with handle made out of 10mm dia bars, funnel, strainer,charcoal and testing on completion including dismantling unserviceable earthing complete all as specified and as directed. |
| 144 | Steel water tubing of 40 mm bore ‘medium grade’ galvanized with all fittings like socket, union, elbow, bend, tees etc laid in trenches, complete all as specified and directed. |
| 145 | 40mm bore gun metal globe or gate valve (ISI marked) with iron wheel head,screwed both ends for iron pipe fixed in repair complete all as specified and directed. |
| 146 | 20mm bore gun metal globe or gate valve (ISI marked) with iron wheel head,screwed both ends for iron pipe fixed in repair complete all as specified and directed. |
| 147 | Drilling/tapping the existing DI/CI pipe line for fixing tee/bend etc of pipe 50/80 mm bore complete all asspecified and directed. |
| 148 | cutting through existing bituminous road/pcc/floor/approx size width 15cmx60cm depth alongcross section of the road for laying of LT cable and repairing the road to match with the original finish complete all asspecified and directed. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
