|
| 1 | Sch 'A' Part-I (B/R works)Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm th (below or above ground level), complete all as specified and directed.Note: No extra cost shall be borne by Govt in r/o flooring overleaped with tile including screed. Thickness shall be considered as total thickness of overleaping. |
| 2 | Demolition of Reinforced Cement Concrete in Roofs, floors ( other than ground floors), beams, staircases, landings, chajjas, lintel band and similar suspended works(reinforcement cut as required to facilitate demolition), complete all as specified and directed. |
| 3 | Demolition of Brick/stone work built in cement morter of any descrption including all necessary quions arches piilars etc, complete all as specified and directed. |
| 4 | Dismantling of timber scantling 40 sq cm and over in section, in any position, complete all as specified and directed. |
| 5 | Dismantling of plain or corrugated steel sheeting or any other type, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed. |
| 6 | Dismantling of existing false ceiling of any type etc, complete all as specified and directed. |
| 7 | Taking down cement plaster on brick/stone or concrete surfaces including racking out joints hacking for key to any thickness scrubbing down with water etc, complete all as specified and directed.Note : No extra cost shall be borne by Govt exchequer for any no of layers over leaping of tiles/mosiac finish. |
| 8 | Taking down chowkhats with shutter (without taking off from shutter) n exc 1.5 sqm each and removing to store, complete all as specified and directed. |
| 9 | Taking down chowkhats with shutter (without taking off from shutter) exc 1.5 sqm and n exc 4 sqm each and removing to store and making good to surface disturbed due taking down, complete all as specified and directed. |
| 10 | Taking down GI tubing of 15 mm bore and connection and including cleaning for refixing or removel, complete all as specified and directed. |
| 11 | Taking down GI tubing of 20 mm bore and connection and including cleaning for refixing or removel, complete all as specified and directed. |
| 12 | Dismantling of existing PVC water tank exc 500 litres and n.exc 1000 ltrs capaicty and removing to store, complete all as specified and directed. |
| 13 | M&L for brick work in cement mortar (1:6) (using old size sub class 'B' bricks) in walling, straight or curved on plan exc 6m mean radius, complete all as specified and directed. |
| 14 | All as per Item No 13.00 here-in-before but except brick. |
| 15 | M&L for stone walling random rubble, uncoursed, well bonded bedded and solidly hearted, built in cement mortar 1:6, complete all as specified and directed. |
| 16 | All as per Item No 15.00 here-in-before but except stone. |
| 17 | Extra over stone walling, random rubble brought upto courses, for hammer dressing to face stones and dressing of face beds and joints, with maximum depressions on face from straight edge held against the dressed surface not exc. 40 mm on lime or sand stone, complete all as specified and directed. |
| 18 | Formwork to sides and soffits of floor or roof beam, beam hunching, girders, lintel, cantilevers, shelves including suports,overhangs etc, complete all as specified and directed. |
| 19 | M&L for RCC 1:2:4 type B1 (using 20 mm graded stone aggregate) for Beams, cantilevers, bressumers, lintel over 1.5m span, complete all as specified and directed. |
| 20 | M&L for mild steel TMT bars 10mm dia and over, cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed. |
| 21 | All as per Item No 20.00 here-in-before but 6 to 8 mm as in reinforcement. |
| 22 | All as per Item No 20.00 here-in-before but 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders. |
| 23 | S&F Joist, channel, angle, or tee sections, fixed independently without connection plate, etc. confirming to Fe 290 (grade E-165) (cut to ordinary lengths i.e. within 20mm of the length indicated), complete all as specified and directed. |
| 24 | Erection and fixing only steel work in main and cross beams jack rafters , purlines where connected to common rafters and running rails and fixed with angle cleats or other connecting plates complete confirming to IS 1161-1979 grade St-240, complete all as specified and directed. |
| 25 | S&F plates (plain or chequered) channels square cut or notched oridinary or counter sunk forming holes w/o any attatchment confirming to Fe-290 Grade-165, complete all as specified and directed. |
| 26 | S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other,or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long, dia of shank 11 to 15 mm, complete all as specified and directed. |
| 27 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated sheet 0.50mm thick of approved colour (multi colour pattern as approved by GE) having tensile strength 550 MPa as in roof covering/ cladding to wall fixed with self tapping screws including side and end lap as per manufacturer’s instructions, complete all as specified and directed. Note: No extra cost shall be borne by Govt exchequer in r/o colour, pattern, etc. |
| 28 | S&F pre-painted galvalume aluminium zinc coating GI based plain sheet 0.50mm thick of approved colour (multi colour pattern as approved by GE) having tensile strength 550 MPa as in ridges, hips, valley gutters fixed with self tapping screws including side and end lap as per manufacturer’s instructions, complete all as specified and directed. |
| 29 | Supply and fixing of 4mm thick designer ceiling board in ceiling fixed with screw as per manufacturers instructions, laid on hot dipped galvanised iron in post grid with 24mm wide T section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33 mm thick galvanised steel sheet & of size 24 x 32 x 300 mm spaced at 12 mm centres securely fixed to the structural soffits by approved hangers at 1200mm maximum centres. Hangers of GI wire 4 mm dia to be fixed by approved rowl plug, level adjusters and screws etc. The last hanger at the end of each main runner shall not be grater than 450 mm from adjustacent wall flush fittings of 1200 mm long screws Tee with (double stiching) to interlocked between main runners at 600 mm centre to from 1200 x 600 mm modules cross tee longer than 600 mm modules to be formed by fittings 600 mm long cross tee, tee perimeter wall angle shall be of 0.45 mm thick galvanised steel of size 19 x 19 mm and 300 mm long of white colour all as per insturction, complete all as specified and directed. |
| 30 | All as per item No 29.00 here-in-before but except material. Note : Ceiling boards dismantled from item No.6.00 here-in-before will stored carefully without any damages and reused as refixing. If contractor damages ceiling board intentionally then recovery of damaged boards shall be carried out as per direction of Engr-in-Charge. |
| 31 | M&L for 15mm thick rendering on fair faces of brick surfaces finished even and smooth without using extra cement in cm 1:4 mixed with WPC, complete all as specified and directed.Note: WPC shall be measured & paid separately. |
| 32 | M&L for 15mm thick rendering on brick or concrete surfaces in cm 1:6 finished even and smooth wihtout using extra cement, complete all as specified and directed. |
| 33 | M&L for rendering 20 mm thick plastering on stone masonry surface in CM (1:6) and rendering is to be finished even and smooth without using extra cement, complete all as specified and directed. |
| 34 | All as per Item No 33.00 here-in-before but in cm 1:4 (external surfaces). |
| 35 | M&L for cement concrete type C-2, 1:3:6 (using 40mm graded stone aggregate), 75 mm thick as in plinth protection laid in slope 1:12 from outer edge of the wall finished even and fair ,laid in alternate bays including providing 6 mm wide joints through out the thickness of plinth protection in concrete bays and in between walling and plinth protection,joint filled mastic filling comprising of one part of heated bituminous 85/25 and 3 parts of sand (all by weight), complete all as specified and directed. |
| 36 | M&L for 25 mm thick cement concrete type B-0, 1:2:4 (using 12.5 mm graded coarse stone aggregeate) as in levelling course to floor finishes, complete all as specified and directed. |
| 37 | S&F 18-20 mm thick machine cut kota stone slab (area of each slab nexc 0.27 Sqm except space constraint) in flooring laid and jointed with gry cement slurry Mixed with pigment to match the shade of the slab incl rubbing and mirror polishing as complete incl roughing the surface over & including 15mm thick screed bed in CM 1:4, complete all as specified and directed. |
| 38 | All as per Item No 37.00 here-in-before but as in riser to steps, skirting ,dado,window cills fixed with 15mm thick rendering in cement mortar 1:4. |
| 39 | M&L for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over & including 15mm thick screed bed in CM (1:4), complete all as specified and directed. |
| 40 | M&L for coloured glazed ceramic tiles in vertical surface (thick 600x300x7mm thick) set and jointed in neat cement slrry and pointed in white or coloured cement to match the colour of tiles over & including 15mm thick rendering in CM (1:4), complete all as specified and directed. |
| 41 | M&L for providing edge moulding to 18-20mm thick stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc, complete all as specified and directed. |
| 42 | M&L for PCC 1:3:6 type C-0 (using 12.5 mm graded stoned aggregate) as in filling of hollow portion of pressed steel frame, complete all as specified and directed. |
| 43 | M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in bed blocks, bed blocks of hold fasts, coping, PCC cill etc, complete all as specified and directed. |
| 44 | S&F factory made MS tubular Box type window of MS rolled steel section conforming to IS-1038 and shall be ISI marked manufactured by ISI approved manufacturer, openable frames shall be fabricated of sections as approved by Engr-in-Charge corner welded to form a solid fused welded joint handles shall be of z section welded with openable frame box steel section(Consisting of both shutter glazed shutter and gauge shutter complete) used in outer frame shutter frame and central frame shall be ERW section of 16 gauge with fixing lugs to be fixed as per provision of IS-1038 except that top lugs shall not be provided , all shutters of windows shall be provided with 4 Nos friction free hinges, 2 Nos 75 mm tower bolts to each leaf of window one at top and one at bottom welded on 3 mm thick steel sheet piece of suitable size which shall be in turn welded to z section f steel window to provide suitable arrangement of using tower bolt and 1 nos bow handle in each shutter. Glazed shutter and , gauged shutter of window , mild steel casement stays 300 mm with hinged joint and two plates with studs complete all as specified with all fittings and fixtures without glazing bars, 3mm sheet glass in glazed shutter and , GI wire mesh,of 0.56 nominal dia and average width of aperature 1.18 mm in gauged shutter, complete all as specified and directed. |
| 45 | S&F of guard bars/grills as specified in between glazed and fly proof window shutter (sand witching guard bars/grill) as per drg No CEPZ/TD-325/07 dt 04.12.07 primer coated, complete all as specified and directed. |
| 46 | S&F pressed steel door frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc of size -125x60mm, complete all as specified and directed. |
| 47 | S&F 105 x 60mm pressed steel door frames for doors with one or more rebate including necessary fixing lugs, hinges lock strike plate etc complete, complete all as specified and directed. |
| 48 | S&F plain framed, panelled shutters (any number of panels) with pannel of timber flat on both sides (feather edged) or of veneered particle board with commercial face veneers 35 mm thick 2nd class hard wood supplied and fitted to chowkats, complete all as specified and directed. |
| 49 | M&L for 35 mm thick second class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc, (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass, etc, size of members of shutter as specified in SSR Part-I, Section 8, clause 8.20 (a), fitted to chowkats, complete all as specified and directed. |
| 50 | S&F stailess steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.18 mm and fixed with tinned tacks of galvanised wire staples, complete all as specified and directed. |
| 51 | M&L for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and directed. |
| 52 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain coloured PVC sheet, reinforced with MS square tube supplying and fixing in opening as per specification and drawing, complete all as specified and directed. |
| 53 | M&L for factory made solid panel PVC shutter 30 mm thick ( style ) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘ C’ channel having a PVC sheet strip 20 mm width struck inside with solvent cement for style and plain colour PVC sheet for top rail lock rail and bottom rail on either side and as gap inserts for top and bottom rail paneling of plain, colour PVC sheet to be fitted in the MS frame welded / sealed to the styles and rail with suitable PVC sheets beading and jointed together with solvent cement S&F in frame at site as per specification and drawing in SSR part-II and as per sample kept in office of AGE B/R. |
| 54 | S&F 300mm ordinary rat tail rod pattern springs including roller plate, complete all as specified and directed. |
| 55 | S&F Aluminium handles, cast type, anodised 150mm long, complete all as specified and directed. |
| 56 | S&F aluminium, anodised barrel tower bolts of extruded section and fixed of size 200 mm long, complete all as specified and directed. |
| 57 | S&F aluminium alloy anodised sliding door bolt with fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed of size 200 mm, complete all as specified and directed. |
| 58 | S&F anodised aluminum 100mm size butt hinges, extruded aluminum alloy ISI marked, complete all as specified and directed. |
| 59 | S&F curtain rod of stainless steel 25 mm dia fancy type complete and with steel baal, hanging hooks/brackets / end caps of length, complete all as specified and directed. |
| 60 | M&L for steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc) of nominal bore 15 mm, complete all as specified and directed. |
| 61 | S&F steel water tubing medium grade galvanised with all fittings including short lengths, laid in trenches complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia 20 mm, complete all as specified and directed. |
| 62 | Fixing only 15 mm dia old galvanized pipes incl new fittings where necessary fixed complete to wall and ceiling or laid in floors, complete all as specified and directed. |
| 63 | Fixing only 20 mm dia old galvanized pipes incl new fittings where necessary fixed complete to wall and ceiling or laid in floors, complete all as specified and directed. |
| 64 | S&F rotational moulded polythene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position of 1000 ltrs capacity with and including tank nipple, complete all as specified and directed. Note : The water tank shall be double layer IS Marked duly embossed on face and weight as per IS Specifications. |
| 65 | S&F in repair Ball valves high pressure 20mm dia of PTMT with epoxy coated Aluminum rod and high density plastic ball screwed for iron pipe and fixed ( Min wt 15 mm -142 grms/ 20mm 210 grms), complete all as specified and directed. |
| 66 | S&F in repair Bib tap cast copper alloy with crutch or butterfly handle, chromium plated fancy type screwed for iron pipe, suitable for 15 mm bore, ISI marked, complete all as specified and directed. |
| 67 | S&F in repair Stop valve/Angle valve cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed for 15mm dia pipe, ISI marked, complete all as specified and directed. |
| 68 | S&F in repair stop valve 20 mm dia cast copper alloy, secrewed down high pressure, with crutch or butterfly handle secrewed both ends for iron pipe and fixed, complete all as specified and directed. |
| 69 | S&F 15 mm bore Brass CP WHB mixer for mixing hot and cold water screwed down for iron pipe and fixed, complete all as specified and directed. |
| 70 | S&F in repair 15mm bore wall mixer with overhead shower with 115 mm long bend pipe on upper side , connecting legs & wall flanges, complete all as specified and directed. |
| 71 | S&F in repair viterous China urinal half stall type white including CP spreader holding screws, waster pipe etc, complete all as specified and directed. |
| 72 | S&F in repair wash basin of size 550x400mm, vitreous china (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand, complete all as specified and directed. |
| 73 | S&F in repair vitreous china wash down water closet white orissa pattern of size 550x440mm including integral foot rest excluding flushing cistern and flush pipe) including P or S trap, complete all as specified and directed. |
| 74 | S&F in repair vitreous china wash down water closet pan (pedestal type), white (excluding flushing cistern, flush pipe and including P or S trap, complete all as specified and directed. |
| 75 | S&F in repair plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and directed. |
| 76 | S&F in repair PVC low level flushing cistern 10 ltrs capacity white with inlet ball value, float valve and handle incl brackets, PVC flush pipe, complete all as specified and directed. |
| 77 | S&F in repair stop valve (concealed type) cast copper chromium plated screwed down, high pressure with capstan head suitable for 15 mm bore, screwed both ends for iron pipe, complete all as specified and directed. |
| 78 | S&F in repair hand shower (health faucet) with 8mm dia 1.2 meter long flexible braided chromium plated tube with wall hook, complete all as specified and directed. |
| 79 | S&F in repair chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union, complete all as specified and directed. |
| 80 | S&F in repair tubular towel rail 20mm dia, D type, chromium plated 60cm long between flanges, complete all as specified and directed. |
| 81 | S&F Grating of 100 mm dia, fixed in repairs, complete all as specified and directed. |
| 82 | S&F stainless steel soap dish with and including rowel plugs and s s screws, complete all as specified and directed. |
| 83 | S&F six peg set with 4 mm thick base plate stain less steel fixed with and including rowel plugs and stainless steel screws, complete all as specified and directed. |
| 84 | S&F glass corner shelf with chromium plated guard rails fiexed with and including stain less steel screws and rowel plugs, complete all as specified and directed. |
| 85 | S&F sheet glass bevelled edge mirror of selected quality glass of 5 mm sheet glass mounted to walls with fasteners or plugs of selected quality including removal of existing broken/US glass mirror any size, complete all as specified and directed. |
| 86 | S&F in repair PVC connection 15 mm x 450 mm including brass check nut at both ends screwed for iron pipe of 15 mm bore, complete all as specified and directed. |
| 87 | M&L in repair for 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified and directed. |
| 88 | S&F in repair PVC SWR pipes 110 mm bore single socketed in any length with rubber ring joint fixed to or laid in trenches or in floors,walls with steel clamps, complete all as specified and directed. |
| 89 | S&F in repair PVC SWR pipes 75 mm bore single socketed in any length with rubber ring joint fixed to or laid in trenches or in floors with steel clamps, complete all as specified and directed. |
| 90 | S&F in repair 110 mm bore PVC (SWR) bend any radius, complete all as specified and directed. |
| 91 | S&F in repair 110 mm bore PVC (SWR) reducer, complete all as specified and directed. |
| 92 | S&F in repair 75 mm bore PVC (SWR) vent cowl, complete all as specified and directed. |
| 93 | S&F in repair 32mm waste fittings, brass, chromium plated for glazed ware basins, etc with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, complete all as specified and directed. |
| 94 | M&L for preparing newly plastered surface and apply two coats of oil bound distemper over & including a coat of 2mm thick wall care putty, complete all as specified and directed. Note- Painting shall be done by Painting roller. |
| 95 | M&L for complete reomoval of existing treatment over walls, by using mechanical equipment (Electric sander) and preparation of surface to receive the treatment and applying two coats of distemper oil emulsion, complete all as specified and directed. Note : Once the surface is cleared off old treatment completely, the stage for treatment shall be approved by Eng-in-Charge. |
| 96 | M&L for preparation of new wall surfaces and applying two coats of cement base paint on wall with approved colour (multi colour pattern as approved by GE), complete all as specified and directed. Note- Painting shall be done by Painting roller. |
| 97 | M&L for preparation of old wall plastered or unplastered surfaces and applying one coat of cement base paint on wall with approved colour (multi colour pattern as approved by GE), complete all as specified and directed. Note- Painting shall be done by Painting roller. |
| 98 | M&L for two coats of synthetic enamel paint on new steel surfaces including preparation over a coat of red oxide Zinc chrome primer, complete all as specified and directed. |
| 99 | M&L for one coat of synthetic enamel paint on old steel surfaces including preparation of surfaces, complete all as specified and directed. |
| 100 | M&L for two coats of synthetic enamel paint on new wooden surfaces incl prep over a coat of pink primmer, complete all as specified and directed. |
| 101 | M&L for one coat of synthetic enamel paints over old wooden surfaces including preparation of surfaces, complete all as specified and directed. |
| 102 | M&L for one coat of black paint for writing letters on surfaces of any description wood,steel, iron, concrete, brick,stone etc exc 10 cm width or girth, complete all as specified and directed. Note- Letter writing/Painting shall be done at any height as directed by Engr-in-Charge. |
| 103 | M&L for re-writing and repainting of letter or figures (Block, Roman, Italic or Indian) n. exc 30 cm high with synthetic enamel paint of any colour, complete all as specified and directed. Note- Letter writing/Painting shall be done at any height as directed by Engr-in-Charge. |
| 104 | M&L for re-writing and repainting of Stops, Commas, Short lines, Dashes, Hyphens, Brackets by using synthetic enamel paint of any colour, complete all as specified and directed.Note- Letter writing/Painting shall be done at any height as directed by Engr-in-Charge. |
| 105 | M&L for 75 mm thick cement concrete type C-2, 1:3:6 (using 40 mm graded stone aggregeate) as in sub base to floor finishes, complete all as specified and directed. |
| 106 | M&L for chequered cement concrete tiles of size 30cm x 30cm x 25mm thick set and jointed and pointed in neat cement slurry as in treads and cut polished with gray cement and no pigment over & including 15mm thick screed bed in CM (1:4), complete all as specified and directed. |
| 107 | M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required, complete all as specified and directed. |
| 108 | M&L for cement concrete type C2 1:3:6 (using 40 mm graded crushed stone aggregate) as in surface channel and drains including, complete all as specified and directed. |
| 109 | M&L for extra forming fair finished drain or channels 30cm inner girth in cement concrete using extra cement including forms, mould, mitred/stopped ends etc, complete all as specified and directed. |
| 110 | M&L for Provn on site 10 Users LLDPE septic tank with upper flow filter incl media designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, vent shaft, connection etc, complete all as specified and directed. |
| 111 | Construction of Septic tanks of capacity 50 users, exc, in ordinary soil, foundation, in PCC 1:2:4, brick work in CM 1:4, RCC,Slab covers including RCC precast manhole cover having 6mm plate embedded all and sludge chambers reinforced cover with angle iron frame Vent shaft around/fibre etc, complete all as specified and directed. |
| 112 | Excavation in trenches n,exc 1.5m wide and 1.5m deep for foundations of manhole and getting out in any type of soil, complete all as specified and directed. |
| 113 | M&L for PCC.1:3:6 type C-2 (40mm graded aggregate) as in foundation mass concrete, complete all as specified and directed. |
| 114 | M&L for PCC 1:4:8 type D-2 as in bed to drain pipes incl packing under and haunching against the sides of pipes after they are laid and tested for SGSW pipe 150mm dia, complete all as specified and directed. |
| 115 | M&L for Pre-cast Cement Concrete 1:2:4 type B-1, set in CM 1:4, (using 20mm graded stone aggregate) as in landings, covers, slabs (for manholes cover), chullah hoods, chajjas, water troughs, shelves and similar articles with plain faces, etc, complete all as specified and directed. |
| 116 | M&L for Salt glazed Stoneware pipe 150mm dia in any length with or without ear laid in trenches and jointed in CM 1:1, complete all as specified and directed. |
| 117 | Returning filling and ramming in layers n.exc 25cm deep as in soil, complete all as specified and directed. |
| 118 | Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point, complete all as specified and directed. Please Enable Macros to View BoQ information |
| 119 | Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point, complete all as specified and directed. Please Enable Macros to View BoQ information |
