|
| 1 | Taking down chowkhats or frame exceeding 1.5 Sq. m but not exceeding 4 Sq. m each with shutters without taking off shutters from the frame, complete all as specified and directed. |
| 2 | Taking down chowkhats or frame not exceeding 1.5 Sq. m each with shutters without taking off shutters from the frame complete all as specified and directed. |
| 3 | Taking down of shutter of any description exc. 1 Sqm & n.exc. 2 Sqm each complete all as specified and directed. |
| 4 | S&F Factory made pressed steel frames, conforming to IS, having profile 125 mm x 60 mm for doors with one or more rebates made out of 1.25 mm thick mild steel sheet, including necessary fixing lugs, butt hinges, lock strike plate etc complete all as specified and directed. |
| 5 | S&F Factory made pressed steel frames, conforming to IS, having profile 105 mm x 60 mm for doors with one or more rebates made out of 1.25 mm thick mild steel sheet, including necessary fixing lugs, butt hinges, lock strike plate etc complete all as specified and directed. |
| 6 | S&F for flush door shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, 30 mm thick, ISI marked, complete all as specified and directed. |
| 7 | Supply & fix MS work as in door chowkats or frames of angle or other section etc complete conforming to Fe-410-W Gde E-250 quality A complete all as specified & directed. |
| 8 | M&L gauged shutter shall be made out of U frame 35x35x5mm, 50*50*5mm and 1.5mm thick as shown on drawing. The frame for shutter shall be of pressed steel and 10mm Square bars grill complete with fly proof wire mesh having 0.63mm nominal dia wire and 1.4mm average width aperture including two coats of synthetic enamel paint over a coat of red oxide primer and including taking down old doors any type with iron items complete all as specified and directed. |
| 9 | S&F Butt hinges, medium weight, cold rolled mild steel and fixed with screws or with welding to existing MS frames, 100 mm size, ISI marked, complete all as specified & directed. |
| 10 | S&F Aluminium, anodized barrel tower bolts of extruded section and fixed, 200 mm long, dia of bolt not less than 10 mm, ISI marked, complete all as specified & directed. |
| 11 | S&F aluminium anodized handle of size 150 mm, ISI marked, complete all as specified & directed. |
| 12 | S&F aluminium alloy, anodised, sliding door bolt 250mm size with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed ISI marked complete all as specified & directed. |
| 13 | Material & labour for preparation of new or previously untreated steel surface of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 14 | Material & labour for preparation of new or previously untreated wooden surfaces of any description, not otherwise described over 10cm width or girth and apply two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed . |
| 15 | S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm PVC sheet reinforced suitable for solid PVC door suppling & fixing in opening, complete all as specified & directed. |
| 16 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, & joined together with solvent cement, in the frame at site as per specification & drawing. |
| 17 | S&F Stainless steel butt hinges 100mm in size complete all as specified and directed. |
| 18 | Hacking out old broken glass ( any thickness, size, quality or discription) from metal/wooden frames fixed with pin, beading or oil putty complete all as specified and directed. |
| 19 | S&F 3mm thick sheet glass ordinary quality of any size and in any type of frame and glazing with oil putty (or beading ) in square n.exc 0.5 Sqm in each panes complete all as specified and directed. |
| 20 | S&F as in Figured glass, 3 mm thick, pin head type and glazing with oil putty in squares not exceeding 0.5 sq. m in each pane, complete all as specified and directed. |
| 21 | M&L for repairs to anodised aluminium door shutters and make it serviceable condition including necessary joining cleats, glazing clips, ruber neoprene packing, snap beading, screws complete all as specified and directed. |
| 22 | Supply and fixing 06mm thick hollow insulated PVC wall lining consisting of PVC insualted panels having expended polystyrene (EPS) fitting into the wall by suing nilas etc complete all as specified and directed. |
| 23 | S&F Insulated PVC Wall Lining consisting of PVC Insulated Panels having expanded polystyrene (EPS) stuck to 2mm thick plain colour PVC sheet duly fitted into the wall as per specifications and drawing and Thickness of insulated PVC wall lining 25mm Insulated Panel with Single Side Prelam PVC sheet used instead of plain colour sheet complete all as specified and directed. |
| 24 | Material & labour for double charged vitrified coloured tiles of size exc 0.18 Sqm but n.exc 2 Sqm having thickness specified by the manufacturer ,(size as directed by Engineer-in-charge) coloured, in floor set and jointed in neat cement slurry and pointed in white/coloured cement to match in floor over and including 15mm thick cement screed bed of CM (1:6) including Dismantling of old tiles of any size complete all as specified & directed. |
| 25 | M&L Non - Skid Coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick cement screed bed or bedding layer in CM 1:6 Complete all as specified and directed. |
| 26 | Material & labour non-skid coloured ceramic tiles of size 400x400x7-8mm thick, in floor set and jointed in neat cement slurry and pointed in white/coloured cement to match in floor over and including 15mm thick cement screed bed of CM (1:6) complete all as specified & directed. |
| 27 | Material & labour for glazed coloured ceramic tiles of size 450x300x7-8mm thick, on vertical surfaces set and jointed in neat cement slurry and pointed in white/ coloured cement to match with existing work over and including 10mm thick rendering in CM 1:4 complete all as specified & directed. |
| 28 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 29 | Taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified and directed and removing rubbish etc. complete all as specified and directed. |
| 30 | M&L Rendering 15 mm thick on fair faces of brick work on wall surfaces in CM 1:4 finished even and smooth without using extra cement Complete all as specified and directed |
| 31 | M&L Rendring 10 mm thick on fair faces of brick work on wall surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed. |
| 32 | M& L for preparation of new plastered/ Unplastered surface of walls and applying two coat of oil emulsion distemper complete all as specified and directed. |
| 33 | M& L for preparation of new plastered/ Unplastered surface of walls and applying two coat of cement base paint complete all as specified and directed. |
| 34 | M&L for provision of powder coated GI frame work(snap grid) suitable for size as in false ceiling of size 605mm x 605mm including fixing 4mm thick gypsum board in ceiling size 60cm x 60cm fixed to metacil snap gird and dismantling wall and ceiling boards or insulation boards/slabs any thickness including cover fillets, consisting of followings and all as directed. Note :- (i) Powder coated GI sections incorporated in frame work shall conform to designation 63400 given in IS: 737-1986. (ii) The snap grid shall consist of powder coated GI main /cross tee of size 36.5mmx25mmx1.0mm thick and 25mm x 25m x1.0mm thick, respectively. (iii) Snap grid frame shall be fixed to ceiling with supporting hangers consisting of S & F 2mm to 4mm dia mild steel GI wire. (iv) The main and cross tees shall be jointed at junction/crossings with powder coated GI angle bracket, of size 15mmx15mmx1.0mm thick, fixed with suitable mild steel, bolts, nuts and washers all as per manufacturer’s instructions. (v) The snap grid (main/cross tee section) shall be supported at ends all along the wall with powder coated GI angle of size 25mmx25mmx1.0 mm powder coated GI thick. (vi) Size of the snap grid shall be 605mm by 605mm. (vii) Minimum average thickness of powder coating shall be 15 micron including dismantling of old false ceiling of any type board including any type snapgrid complete all as specified and directed. |
| 35 | Dismantling asbestos cement (corrugated, semi-corrugated, etc) sheet in roof coverings complete all as specified and directed. |
| 36 | S&F pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 37 | S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall/ridges etc, fixed with self tapping screws complete all as specified and directed. |
| 38 | M&L for chequered cement concrete colour tiles size 300mm cmx300mmx30 mm thick, with colour pigment, set, jointed and pointed in neat cement slurry over and including 20 mm thick screed bed in cm (1:6) including dismantling of old existing tiles of any type complete all as specified and directed. Please Enable Macros to View BoQ information |
