Tender For Special Repair Work At Jnv Lakhisarai (Bihar), Lakhisarai-Bihar

TDR : 55299379

Tender Notice
BOQ

Expired

Lakhisarai , Bihar

Tender Brief : Tender For Special Repair Work At Jnv Lakhisarai (Bihar)

Document Fees
₹ 11800 /-

EMD
₹ 136000.0 /-

Tender Value
₹ 68 Lakhs /-

Submission Date
08-05-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Discription of work
2	Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge
3	50mm average thickness
4	25 mm average thickness
5	Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge.
6	Bars upto 12 mm diameter
7	Cleaning of exposed concrete surface of sticking material including loose and foreign material by sand blasting with coarse sand followed by and including cleaning with oil free air blast as per direction of Engineer in charge.
8	Shotcreting R.C.C. columns, beams and slabs etc. in layers with approved design mix concrete having the specified minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10 mm maximum size in proportion as per design criteria] including the cost of centering and shuttering at edges and corners etc. as directed by Engineerin- Charge
9	Note: Rates shall include the providing necessary ground wires etc. The levelling gauges, if used, shall be paid for separately. Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/ tapping with a blunt metal instrument
10	25mm thick in Grade M 25 with cement content not less than 330 kg per cum
11	50mm thick in Grade M 25 with cement content not less than 330 kg per cum
12	Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.
13	For thickness of tiles 10 mm to 25 mm
14	Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.Glazed Vitrified tiles Matt/Antiskid finish of size of Tile 600 x 600 mm
15	Providing and fixing Ist quality Glazed vitrified tiles polished finish of size 450 x 600 mm tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
16	Providing and filling of cinder in sunken portions.
17	Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
18	Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
19	15mm cement plaster on rough side of single or half brick wall of mix
20	1:6 (1 cement : 6 course sand)
21	6mm cement plaster to ceiling of mix :
22	1:3 ( 1 cement : 3 fine sand)
23	Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.
24	Two coats
25	Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour 13.81.1 Old work (one or more coats)
26	Old work (one or more coats)
27	Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
28	Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :
29	Of area 3 sq. metres and below
30	Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead :
31	Of area 3 sq. metres and below
32	Renewing glass panes, with putty and nails wherever necessaryincluding racking out the old putty:
33	Float glass panes of nominal thickness 4 mm(weight not less than 10kg/sqm)
34	Renewal of old putty of glass panes (length)
35	Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete .Fixed to steel windows by welding
36	Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete
37	300 mm weighing not less than 200gms.
38	Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :
39	100X58X1.90 mm
40	Providing & fixing Stainless steel sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc complete. (a) 250mm x 16mm .
41	Providing and fixing stainless steel towerbolts (barrel type) with necessary screws etc. complete.
42	300 x 10mm
43	150 x 10mm
44	Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. (a) 125 mm.
45	125 mm
46	Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Area of slab upto 0.50 sqm
47	Providing and fixing to existing door frames.
48	30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam PUF)/ Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge.
49	Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm allcomplete.
50	With 12 mm mild steel U beading
51	Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D, F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment).
52	Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size
53	Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.
54	Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
55	Providing & fixing glass panes with putty and glazing clips in steel doors,windows, clerestory windows, all complete with
56	4.0 mm thick glass panes
57	Applying priming coat :
58	With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works
59	Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:
60	Two or more coats on new work
61	Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:
62	One or more coats on old work
63	Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead :
64	75 to 80 mm dia pipe
65	Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge :
66	15 mm to 40 mm nominal bore
67	Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-in-charge:
68	Up to 150 mm diameter
69	Taking out C.I. cover with frame from R.C.C. top slab of manholes of various sizes including demolishing of R.C.C. work manually/ by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead as per direction of Engineer-in-charge.
70	Dismantling of road gully chamber of various sizes including C.I. grating with frame including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead including refilling the excavated gap.
71	Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge.
72	Dismantling of C.I. sluice valve including stacking of useful materials within a lead of 50 metres
73	Up to 150 mm diameter
74	Dismantling of manhole including R.C.C. top slab, C.I. cover with frame, including stacking of useful materials near the site and disposal of unserviceable materials within 50 m lead as per direction of Engineer- charge :
75	Rectangular manhole 90x80 cm and 45 cm deep
76	Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
77	110 mm diameter
78	Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.
79	a) Coupler
80	110 mm
81	b) Bend 87.5°
82	110 mm bend
83	Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour on old work :
84	75 mm diameter pipes
85	100 mm diameter pipes
86	Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:
87	White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
88	Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.
89	W.C. pan with ISI marked white solid plastic seat and lid
90	Providing & fixing white vitreous china wash basin with C.I. brackets painted white, 15mm C.P. brass pillar taps, C.P. brass chain with rubber plug, 32mm C.P. brass waste of standard pattern including cutting & making good the walls wherever required.
91	a) Flat back wash Basin size 550x400 mm with single 15mm C.P. brass pillar tap.
92	Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively.
93	Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete.
94	a) 32mm dia (for wash basin)
95	b) 40mm dia (for sink and urinal)
96	Providing & fixing C.P. Brass health faucet for ablution with 1 meter long PVC tube, hand shower, couplings, wall hook and other accessories.
97	Waste coupling 38 mm dia of 83 mm length and 77mmbreadth, weighing not less than 60 gms
98	Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipes for soil, waste, and vent, Type-B as per IS : 13592 suitable for rubber ring joints, including all neccessary specials and fittings (confirming to IS:14735) i.e. bends, tees, junctions (with or without doors), reducers, WC connectors, couplers, expansion joints / bellows, cowels, clamps, rubber rings, clean outs etc. fixing at wall/ ceiling/ floor level supported by clamp & hangers etc. in concealed / inside duct / under floor & basement ceiling / external work etc. including chase cutting as required, excavation and back filling in all kind of soils, suspended from floor under false ceiling or embedding the pipes laid under floors / building in 75 mm. alround 1:2:4 cement concrete (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including cost of shuttering for proper completion of the work, breaking and making good the walls and floors etc. after pipes have been duly laid and tested. The rubber ring shall confirm to IS:5382.The Pipes will be supported with threaded G I rods & U clamps with nuts, washers etc on 50x50x5 mm slotted angle. The cost will include all support arrangements. The work includes commissioning of all pipes lines as per drawings and specifications and as directed by engg-in-charge at site.
99	110 mm dia (Wall Thickness - 3.2 to 3.8 mm)
100	75 mm dia (Wall Thickness - 3.2 to 3.8 mm)
101	Providing & fixing UPVC Floor trap of self cleansing design with stainless steel grating complete in all respects.
102	Multi Floor Trap (5\\" Ht) with height raiser and branch saddle strip of 50/75 mm outlet
103	Plain Floor Trap (4\\" Ht) with 50 / 75 outlet and with height raiser
104	P-Trap type Floor Trap 110 x 75 mm
105	Extra for providing & fixing 125 mm dia C.P. grating in place of C.I. grating over floor traps.
106	Providing & fixing of SS Floor Cleanout, round or square with rubber seal and flat round cover with screws and other required fitting complete as required.
107	Providing and fixing 100 mm sand cast Iron grating for gully trap.
108	Providing & fixing soil, waste and vent pipes.
109	a) 100mm dia centrifugally cast iron S & S pipe.
110	b) 75mm dia centrifugally cast iron S & S pipe.
111	Providing & fixing M.S. holder bat clamps of approved design to sand cast iron/centrifugally cast (Spun) iron S & S pipe embeded in & including cement concrete blocks 10x10x10cm. of 1:2:4 mix (1 cement : 2 coarse : 4 graded stone aggregate 20mm nominal size). Including cost of cutting holes & making good the walls etc.
112	a) for 100mm dia pipe.
113	b) for 75mm dia pipe.
114	Providing and fixing bend of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete.
115	a) 100mm
116	Sand cast iron S&S as per IS - 3989
117	b) 75mm
118	Sand cast iron S&S as per IS- 3989
119	Providing and fixing plain cast iron S & S sanitary bend.
120	a) 100mm
121	Sand cast iron S&S as per IS - 1729
122	b) 75mm
123	Sand cast iron S&S as per IS - 3989
124	Providing and fixing centrifugaly cast iron single equal plain junction of required degree.
125	a) 100x100x100mm
126	b) 75x75x75mm
127	Providing and fixing cast iron terminal guard.
128	a) 100mm
129	b) 75mm
130	Providing & fixing cast iron coller.
131	a) 100 mm
132	Sand cast iron S&S as per IS - 3989
133	b) 75mm dia.
134	Sand cast iron S&S as per IS - 3989
135	Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes & fitting of diameters.
136	a) 100mm
137	b) 75mm
138	Providing & fixing cast iron trap of self cleansing design with or without ventarm complete, including cost of cutting & making good the walls & floors.
139	a) 100mm inlet & 75mm outlet.
140	Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2\\" BSP thread and shapes, weighing not less than 60 gms.
141	Providing and fixing PTMT urinal cock of approved quality and colour.
142	15 mm nominal bore, 80 mm long, 42 mm high and 30mm wide with BSP female threads weighing not less than 48 gms
143	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
144	15 mm nominal outer dia Pipes
145	20 mm nominal outer dia Pipes
146	25 mm nominal outer dia Pipes
147	32 mm nominal outer dia Pipes
148	Providing and fixing brass stop cock of approved quality.
149	15 mm nominal bore
150	Providing and fixing gun metal gate valve with wheel of approved quality.
151	a) 25mm dia nominal bore
152	b) 32mm dia nominal bore
153	Providing and fixing ball valve (brass) of approved quality complete. (High or low pressure with plastic floats).
154	a) 25mm. Nominal bore
155	Providing and fixing 30 cm long unplasticised PVC connection pipe with brass unions.
156	a) 15mm nominal bore
157	Providing and fixing 45 cm long unplasticised PVC connection pipe with brass unions.
158	a) 15mm nominal bore
159	Providing and placing on terrace (at all floor levels) polyethylene water storage tank of approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
160	Providing & fixing CP brass bib cock of approved quality conforming to IS 8931
161	a) 15mm nominal bore
162	Providing & fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.
163	a) 15mm nominal bore
164	Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931
165	15mm nominal bore
166	Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.
167	Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour.
168	25mm nominal bore, weighing not less than 62 gms
169	Cutting holes up to 30x30 cm in walls including making good the same:
170	With common burnt clay F.P.S. (non modular) bricks
171	Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof.
172	Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc.
173	BOYS DORMITORY (G+1) FOR 96 STUDENTS
174	Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge
175	50mm average thickness
176	25 mm average thickness
177	Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge.
178	Bars upto 12 mm diameter
179	Cleaning of exposed concrete surface of sticking material including loose and foreign material by sand blasting with coarse sand followed by and including cleaning with oil free air blast as per direction of Engineer in charge.
180	Shotcreting R.C.C. columns, beams and slabs etc. in layers with approved design mix concrete having the specified minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10 mm maximum size in proportion as per design criteria] including the cost of centering and shuttering at edges and corners etc. as directed by Engineerin- Charge
181	Note: Rates shall include the providing necessary ground wires etc. The levelling gauges, if used, shall be paid for separately. Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/ tapping with a blunt metal instrument
182	25mm thick in Grade M 25 with cement content not less than 330 kg per cum
183	50mm thick in Grade M 25 with cement content not less than 330 kg per cum
184	Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.
185	For thickness of tiles 10 mm to 25 mm
186	Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.Glazed Vitrified tiles Matt/Antiskid finish of size of Tile 600 x 600 mm
187	Providing and fixing Ist quality Glazed vitrified tiles polished finish of size 450 x 600 mm tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
188	Providing and filling of cinder in sunken portions.
189	Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
190	Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
191	15mm cement plaster on rough side of single or half brick wall of mix
192	1:6 (1 cement : 6 course sand)
193	6mm cement plaster to ceiling of mix :
194	1:3 ( 1 cement : 3 fine sand)
195	Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.
196	Two coats
197	Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour 13.81.1 Old work (one or more coats)
198	Old work (one or more coats)
199	Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
200	Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :
201	Of area 3 sq. metres and below
202	Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead :
203	Of area 3 sq. metres and below
204	Renewing glass panes, with putty and nails wherever necessaryincluding racking out the old putty:
205	Float glass panes of nominal thickness 4 mm(weight not less than 10kg/sqm)
206	Renewal of old putty of glass panes (length)
207	Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete .Fixed to steel windows by welding
208	Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete
209	300 mm weighing not less than 200gms.
210	Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :
211	100X58X1.90 mm
212	Providing & fixing Stainless steel sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc complete. (a) 250mm x 16mm .
213	Providing and fixing stainless steel towerbolts (barrel type) with necessary screws etc. complete.
214	300 x 10mm
215	150 x 10mm
216	Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. (a) 125 mm.
217	125 mm
218	Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Area of slab upto 0.50 sqm
219	Providing and fixing to existing door frames.
220	30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam PUF)/ Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge.
221	Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm allcomplete.
222	With 12 mm mild steel U beading
223	Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D, F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment).
224	Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size
225	Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.
226	Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
227	Providing & fixing glass panes with putty and glazing clips in steel doors,windows, clerestory windows, all complete with
228	4.0 mm thick glass panes
229	Applying priming coat :
230	With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works
231	Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:
232	Two or more coats on new work
233	Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:
234	One or more coats on old work
235	Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead :
236	75 to 80 mm dia pipe
237	Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge :
238	15 mm to 40 mm nominal bore
239	Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-in-charge:
240	Up to 150 mm diameter
241	Taking out C.I. cover with frame from R.C.C. top slab of manholes of various sizes including demolishing of R.C.C. work manually/ by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead as per direction of Engineer-in-charge.
242	Dismantling of road gully chamber of various sizes including C.I. grating with frame including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead including refilling the excavated gap.
243	Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge.
244	Dismantling of C.I. sluice valve including stacking of useful materials within a lead of 50 metres
245	Up to 150 mm diameter
246	Dismantling of manhole including R.C.C. top slab, C.I. cover with frame, including stacking of useful materials near the site and disposal of unserviceable materials within 50 m lead as per direction of Engineer- charge :
247	Rectangular manhole 90x80 cm and 45 cm deep
248	Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
249	110 mm diameter
250	Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.
251	a) Coupler
252	110 mm
253	b) Bend 87.5°
254	110 mm bend
255	Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour on old work :
256	75 mm diameter pipes
257	100 mm diameter pipes
258	Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:
259	White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
260	Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.
261	W.C. pan with ISI marked white solid plastic seat and lid
262	Providing & fixing white vitreous china wash basin with C.I. brackets painted white, 15mm C.P. brass pillar taps, C.P. brass chain with rubber plug, 32mm C.P. brass waste of standard pattern including cutting & making good the walls wherever required.
263	a) Flat back wash Basin size 550x400 mm with single 15mm C.P. brass pillar tap.
264	Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively.
265	Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete.
266	a) 32mm dia (for wash basin)
267	b) 40mm dia (for sink and urinal)
268	Providing & fixing C.P. Brass health faucet for ablution with 1 meter long PVC tube, hand shower, couplings, wall hook and other accessories.
269	Waste coupling 38 mm dia of 83 mm length and 77mmbreadth, weighing not less than 60 gms
270	Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipes for soil, waste, and vent, Type-B as per IS : 13592 suitable for rubber ring joints, including all neccessary specials and fittings (confirming to IS:14735) i.e. bends, tees, junctions (with or without doors), reducers, WC connectors, couplers, expansion joints / bellows, cowels, clamps, rubber rings, clean outs etc. fixing at wall/ ceiling/ floor level supported by clamp & hangers etc. in concealed / inside duct / under floor & basement ceiling / external work etc. including chase cutting as required, excavation and back filling in all kind of soils, suspended from floor under false ceiling or embedding the pipes laid under floors / building in 75 mm. alround 1:2:4 cement concrete (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including cost of shuttering for proper completion of the work, breaking and making good the walls and floors etc. after pipes have been duly laid and tested. The rubber ring shall confirm to IS:5382.The Pipes will be supported with threaded G I rods & U clamps with nuts, washers etc on 50x50x5 mm slotted angle. The cost will include all support arrangements. The work includes commissioning of all pipes lines as per drawings and specifications and as directed by engg-in-charge at site.
271	110 mm dia (Wall Thickness - 3.2 to 3.8 mm)
272	75 mm dia (Wall Thickness - 3.2 to 3.8 mm)
273	Providing & fixing UPVC Floor trap of self cleansing design with stainless steel grating complete in all respects.
274	Multi Floor Trap (5\\" Ht) with height raiser and branch saddle strip of 50/75 mm outlet
275	Plain Floor Trap (4\\" Ht) with 50 / 75 outlet and with height raiser
276	P-Trap type Floor Trap 110 x 75 mm
277	Extra for providing & fixing 125 mm dia C.P. grating in place of C.I. grating over floor traps.
278	Providing & fixing of SS Floor Cleanout, round or square with rubber seal and flat round cover with screws and other required fitting complete as required.
279	Providing and fixing 100 mm sand cast Iron grating for gully trap.
280	Providing & fixing soil, waste and vent pipes.
281	a) 100mm dia centrifugally cast iron S & S pipe.
282	b) 75mm dia centrifugally cast iron S & S pipe.
283	Providing & fixing M.S. holder bat clamps of approved design to sand cast iron/centrifugally cast (Spun) iron S & S pipe embeded in & including cement concrete blocks 10x10x10cm. of 1:2:4 mix (1 cement : 2 coarse : 4 graded stone aggregate 20mm nominal size). Including cost of cutting holes & making good the walls etc.
284	a) for 100mm dia pipe.
285	b) for 75mm dia pipe.
286	Providing and fixing bend of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete.
287	a) 100mm
288	Sand cast iron S&S as per IS - 3989
289	b) 75mm
290	Sand cast iron S&S as per IS- 3989
291	Providing and fixing plain cast iron S & S sanitary bend.
292	a) 100mm
293	Sand cast iron S&S as per IS - 1729
294	b) 75mm
295	Sand cast iron S&S as per IS - 3989
296	Providing and fixing centrifugaly cast iron single equal plain junction of required degree.
297	a) 100x100x100mm
298	b) 75x75x75mm
299	Providing and fixing cast iron terminal guard.
300	a) 100mm
301	b) 75mm
302	Providing & fixing cast iron coller.
303	a) 100 mm
304	Sand cast iron S&S as per IS - 3989
305	b) 75mm dia.
306	Sand cast iron S&S as per IS - 3989
307	Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes & fitting of diameters.
308	a) 100mm
309	b) 75mm
310	Providing & fixing cast iron trap of self cleansing design with or without ventarm complete, including cost of cutting & making good the walls & floors.
311	a) 100mm inlet & 75mm outlet.
312	Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2\\" BSP thread and shapes, weighing not less than 60 gms.
313	Providing and fixing PTMT urinal cock of approved quality and colour.
314	15 mm nominal bore, 80 mm long, 42 mm high and 30mm wide with BSP female threads weighing not less than 48 gms
315	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
316	15 mm nominal outer dia Pipes
317	20 mm nominal outer dia Pipes
318	25 mm nominal outer dia Pipes
319	32 mm nominal outer dia Pipes
320	Providing and fixing brass stop cock of approved quality.
321	15 mm nominal bore
322	Providing and fixing gun metal gate valve with wheel of approved quality.
323	a) 25mm dia nominal bore
324	b) 32mm dia nominal bore
325	Providing and fixing ball valve (brass) of approved quality complete. (High or low pressure with plastic floats).
326	a) 25mm. Nominal bore
327	Providing and fixing 30 cm long unplasticised PVC connection pipe with brass unions.
328	a) 15mm nominal bore
329	Providing and fixing 45 cm long unplasticised PVC connection pipe with brass unions.
330	a) 15mm nominal bore
331	Providing and placing on terrace (at all floor levels) polyethylene water storage tank of approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
332	Providing & fixing CP brass bib cock of approved quality conforming to IS 8931
333	a) 15mm nominal bore
334	Providing & fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.
335	a) 15mm nominal bore
336	Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931
337	15mm nominal bore
338	Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.
339	Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour.
340	25mm nominal bore, weighing not less than 62 gms
341	Cutting holes up to 30x30 cm in walls including making good the same:
342	With common burnt clay F.P.S. (non modular) bricks
343	Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof.
344	Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc.
345	BOYS DORMITORY (G+1) FOR 192 STUDENTS
346	Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge
347	50mm average thickness
348	25 mm average thickness
349	Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge.
350	Bars upto 12 mm diameter
351	Cleaning of exposed concrete surface of sticking material including loose and foreign material by sand blasting with coarse sand followed by and including cleaning with oil free air blast as per direction of Engineer in charge.
352	Shotcreting R.C.C. columns, beams and slabs etc. in layers with approved design mix concrete having the specified minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10 mm maximum size in proportion as per design criteria] including the cost of centering and shuttering at edges and corners etc. as directed by Engineerin- Charge
353	Note: Rates shall include the providing necessary ground wires etc. The levelling gauges, if used, shall be paid for separately. Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/ tapping with a blunt metal instrument
354	25mm thick in Grade M 25 with cement content not less than 330 kg per cum
355	50mm thick in Grade M 25 with cement content not less than 330 kg per cum
356	Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.
357	For thickness of tiles 10 mm to 25 mm
358	Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.Glazed Vitrified tiles Matt/Antiskid finish of size of Tile 600 x 600 mm
359	Providing and fixing Ist quality Glazed vitrified tiles polished finish of size 450 x 600 mm tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
360	Providing and filling of cinder in sunken portions.
361	Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
362	Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
363	15mm cement plaster on rough side of single or half brick wall of mix
364	1:6 (1 cement : 6 course sand)
365	6mm cement plaster to ceiling of mix :
366	1:3 ( 1 cement : 3 fine sand)
367	Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.
368	Two coats
369	Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour 13.81.1 Old work (one or more coats)
370	Old work (one or more coats)
371	Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
372	Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :
373	Of area 3 sq. metres and below
374	Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead :
375	Of area 3 sq. metres and below
376	Renewing glass panes, with putty and nails wherever necessaryincluding racking out the old putty:
377	Float glass panes of nominal thickness 4 mm(weight not less than 10kg/sqm)
378	Renewal of old putty of glass panes (length)
379	Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete .Fixed to steel windows by welding
380	Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete
381	300 mm weighing not less than 200gms.
382	Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :
383	100X58X1.90 mm
384	Providing & fixing Stainless steel sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc complete. (a) 250mm x 16mm .
385	Providing and fixing stainless steel towerbolts (barrel type) with necessary screws etc. complete.
386	300 x 10mm
387	150 x 10mm
388	Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. (a) 125 mm.
389	125 mm
390	Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Area of slab upto 0.50 sqm
391	Providing and fixing to existing door frames.
392	30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam PUF)/ Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge.
393	Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm allcomplete.
394	With 12 mm mild steel U beading
395	Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D, F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment).
396	Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size
397	Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.
398	Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
399	Providing & fixing glass panes with putty and glazing clips in steel doors,windows, clerestory windows, all complete with
400	4.0 mm thick glass panes
401	Applying priming coat :
402	With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works
403	Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:
404	Two or more coats on new work
405	Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:
406	One or more coats on old work
407	Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead :
408	75 to 80 mm dia pipe
409	Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge :
410	15 mm to 40 mm nominal bore
411	Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-in-charge:
412	Up to 150 mm diameter
413	Taking out C.I. cover with frame from R.C.C. top slab of manholes of various sizes including demolishing of R.C.C. work manually/ by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead as per direction of Engineer-in-charge.
414	Dismantling of road gully chamber of various sizes including C.I. grating with frame including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead including refilling the excavated gap.
415	Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge.
416	Dismantling of C.I. sluice valve including stacking of useful materials within a lead of 50 metres
417	Up to 150 mm diameter
418	Dismantling of manhole including R.C.C. top slab, C.I. cover with frame, including stacking of useful materials near the site and disposal of unserviceable materials within 50 m lead as per direction of Engineer- charge :
419	Rectangular manhole 90x80 cm and 45 cm deep
420	Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
421	110 mm diameter
422	Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.
423	a) Coupler
424	110 mm
425	b) Bend 87.5°
426	110 mm bend
427	Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour on old work :
428	75 mm diameter pipes
429	100 mm diameter pipes
430	Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:
431	White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
432	Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.
433	W.C. pan with ISI marked white solid plastic seat and lid
434	Providing & fixing white vitreous china wash basin with C.I. brackets painted white, 15mm C.P. brass pillar taps, C.P. brass chain with rubber plug, 32mm C.P. brass waste of standard pattern including cutting & making good the walls wherever required.
435	a) Flat back wash Basin size 550x400 mm with single 15mm C.P. brass pillar tap.
436	Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively.
437	Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete.
438	a) 32mm dia (for wash basin)
439	b) 40mm dia (for sink and urinal)
440	Providing & fixing C.P. Brass health faucet for ablution with 1 meter long PVC tube, hand shower, couplings, wall hook and other accessories.
441	Waste coupling 38 mm dia of 83 mm length and 77mmbreadth, weighing not less than 60 gms
442	Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipes for soil, waste, and vent, Type-B as per IS : 13592 suitable for rubber ring joints, including all neccessary specials and fittings (confirming to IS:14735) i.e. bends, tees, junctions (with or without doors), reducers, WC connectors, couplers, expansion joints / bellows, cowels, clamps, rubber rings, clean outs etc. fixing at wall/ ceiling/ floor level supported by clamp & hangers etc. in concealed / inside duct / under floor & basement ceiling / external work etc. including chase cutting as required, excavation and back filling in all kind of soils, suspended from floor under false ceiling or embedding the pipes laid under floors / building in 75 mm. alround 1:2:4 cement concrete (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including cost of shuttering for proper completion of the work, breaking and making good the walls and floors etc. after pipes have been duly laid and tested. The rubber ring shall confirm to IS:5382.The Pipes will be supported with threaded G I rods & U clamps with nuts, washers etc on 50x50x5 mm slotted angle. The cost will include all support arrangements. The work includes commissioning of all pipes lines as per drawings and specifications and as directed by engg-in-charge at site.
443	110 mm dia (Wall Thickness - 3.2 to 3.8 mm)
444	75 mm dia (Wall Thickness - 3.2 to 3.8 mm)
445	Providing & fixing UPVC Floor trap of self cleansing design with stainless steel grating complete in all respects.
446	Multi Floor Trap (5\\" Ht) with height raiser and branch saddle strip of 50/75 mm outlet
447	Plain Floor Trap (4\\" Ht) with 50 / 75 outlet and with height raiser
448	P-Trap type Floor Trap 110 x 75 mm
449	Extra for providing & fixing 125 mm dia C.P. grating in place of C.I. grating over floor traps.
450	Providing & fixing of SS Floor Cleanout, round or square with rubber seal and flat round cover with screws and other required fitting complete as required.
451	Providing and fixing 100 mm sand cast Iron grating for gully trap.
452	Providing & fixing soil, waste and vent pipes.
453	a) 100mm dia centrifugally cast iron S & S pipe.
454	b) 75mm dia centrifugally cast iron S & S pipe.
455	Providing & fixing M.S. holder bat clamps of approved design to sand cast iron/centrifugally cast (Spun) iron S & S pipe embeded in & including cement concrete blocks 10x10x10cm. of 1:2:4 mix (1 cement : 2 coarse : 4 graded stone aggregate 20mm nominal size). Including cost of cutting holes & making good the walls etc.
456	a) for 100mm dia pipe.
457	b) for 75mm dia pipe.
458	Providing and fixing bend of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete.
459	a) 100mm
460	Sand cast iron S&S as per IS - 3989
461	b) 75mm
462	Sand cast iron S&S as per IS- 3989
463	Providing and fixing plain cast iron S & S sanitary bend.
464	a) 100mm
465	Sand cast iron S&S as per IS - 1729
466	b) 75mm
467	Sand cast iron S&S as per IS - 3989
468	Providing and fixing centrifugaly cast iron single equal plain junction of required degree.
469	a) 100x100x100mm
470	b) 75x75x75mm
471	Providing and fixing cast iron terminal guard.
472	a) 100mm
473	b) 75mm
474	Providing & fixing cast iron coller.
475	a) 100 mm
476	Sand cast iron S&S as per IS - 3989
477	b) 75mm dia.
478	Sand cast iron S&S as per IS - 3989
479	Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes & fitting of diameters.
480	a) 100mm
481	b) 75mm
482	Providing & fixing cast iron trap of self cleansing design with or without ventarm complete, including cost of cutting & making good the walls & floors.
483	a) 100mm inlet & 75mm outlet.
484	Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2\\" BSP thread and shapes, weighing not less than 60 gms.
485	Providing and fixing PTMT urinal cock of approved quality and colour.
486	15 mm nominal bore, 80 mm long, 42 mm high and 30mm wide with BSP female threads weighing not less than 48 gms
487	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
488	15 mm nominal outer dia Pipes
489	20 mm nominal outer dia Pipes
490	25 mm nominal outer dia Pipes
491	32 mm nominal outer dia Pipes
492	Providing and fixing brass stop cock of approved quality.
493	15 mm nominal bore
494	Providing and fixing gun metal gate valve with wheel of approved quality.
495	a) 25mm dia nominal bore
496	b) 32mm dia nominal bore
497	Providing and fixing ball valve (brass) of approved quality complete. (High or low pressure with plastic floats).
498	a) 25mm. Nominal bore
499	Providing and fixing 30 cm long unplasticised PVC connection pipe with brass unions.
500	a) 15mm nominal bore

Need a Bussiness Loan? Apply Now!
Buy Digital Signature
Bidding Support

Also Visit

Tenders

Bihar Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Special Repair Work At Jnv Lakhisarai (Bihar), Lakhisarai-Bihar

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Special Repair Work At Jnv Lakhisarai (Bihar), Lakhisarai-Bihar

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us