|
| 1 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. DSR2023/15.7.4(RATE-2060.20) |
| 2 | Deduct Brick for Reused (PWD SOR 2025 S.I. No 1A chapter- 1 materials) (5800/1000 No) |
| 3 | Deduct Brick Bats for Reused (PWD SOR 2025 S.I. No 2C chapter- 1 materials)(1100/Cum |
| 4 | Earth work by mechinical / manual means in rough excavation, banking excavated earth in layers not exceeding 20cm in d epth, breaking clods, watering, rolling each layer with ½ tonne roller or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depressions, lead upto 50 m and for all lift All kinds of soil DSR NO.2.8.1/2023 |
| 5 | Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead asper direction of Engineer-in-Charge. DSR 2023 16.83 (RATE-131.75) |
| 6 | Laying Existing old cement cocrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (Old CC paver blocks shall be supplied by the department free of cost). 30% EXISTING TILES DSR 2023 (RATE - 402.95) |
| 7 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. DSR/2023 item Nos15.3 (DSR Rate 3551.25) |
| 8 | Providign & Laying of Granular sub base (G.S.B) including all labour materials, taxes, cartager and T&P etc. compate of work as directed by Engineer in charge. (A.R.) |
| 9 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50 mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.80 mm thick C.C. paver block of M-35 grade with approved colour design and pattern. DSR 16.91.2/2023 (Rate 1091.50) |
| 10 | Providing and laying OF cement concrete with 4 cm guage brick ballast fine sand 1.25 F.M. and cement in proportion of 8:4:1 in foundation and under floors including supply of all materials, labour and T&P etc required for proper completion of the work. PWD SOR 2022 S.I. No 274 |
| 11 | Brick work with class 150 class bricks of designation 15 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand) (AS per DAR) OR DSR S.I.No. 6.1.1/2023 (Rate 7846.30) |
| 12 | Brick work with class 150 class bricks of designation 15 in superstructure above plinth level up to floor V level in all shapes and sizes in : in:Cement mortar 1:4 (1 cement : 4 coarse sand) (AS per DAR) OR DSR S.I.No. 6.4.1/2023 (Rate 9819.98) |
| 13 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) DSR 2023 5.1.2(RATE-9045.75) |
| 14 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) DSR 2023 5.2.2 (RATE-10852.95) |
| 15 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more DSR 5.22A.6 (107.85) |
| 16 | 12 mm cement plaster of mix :1:4 (1 cement: 4 coarse sand) DSR 2023/13.4.1 (RATE-357.35) |
| 17 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.DSR 2023 13.80(RATE-156.05) |
| 18 | Finishing walls with Acrylic Smooth exterior paint of required shade :13.46.1 New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) (Rate 160.60) |
| 19 | Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement 20 mm cement plaster DSR S I No 13.9.2 ( Rate 587.20) |
| 20 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete dsr 2023/ 5.9.1 (Rate 392.15) |
| 21 | same as item no.20 as above but for Lintels, beams, plinth beams, girders, bressumers and cantilevers etc dsr 2023/ 5.9.5)(RATE-736.40) |
| 22 | same as item no. 20 as above but for Suspended floors, roofs, landings, balconies and access platform dsr 2023/ 5.9.3 (Rate 927.25) |
| 23 | Same as item No. 20 as above but for Columns, Pillars, Piers, Abutments, Posts and Struts dsr 2023/ 5.9.6 (Rate 961.30) |
| 24 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. DSR/2023 S I No 10.1 (Rate 117.35) |
| 25 | Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws DSR 2023/9.21.2)(Rate 2172.10) |
| 26 | Providing and and fixing ISI marked oxidised M.S. tower bolt black finish ,(Barrel type )with necessary screws etc .complete DSR-2023/9.63.1250x10mm(Rate 83.90) |
| 27 | Providing and fixing ISI marked oxidised M.S.handles conforming to IS 4992 with necessary screws etc. complete. (Copper oxidised as per IS 1378) 125 mm DSR2023/9.66.1 (RATE-39.95) |
| 28 | Providing and fixing ISI marked oxides M.S. sliding door bolts with nuts & screws etc. complete DSR-2023/9.62.1 (216.55) |
| 29 | Finishing walls with Acrylic Smooth exterior paint of required shade :13.46.1 New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) (Rate 160.60) |
| 30 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. DSR S I No 11.3.1/2023 (Rate 614.20) |
| 31 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) DSR SI No 14.5.1(Rate 1090.65) |
| 32 | Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar,bent to shape with hooked ends in R.C.C. slabs or beams during laying,including painting the exposed portion of loop, all as per standard design complete.DSR S I No.10.17/2023(226.00) |
| 33 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group A. DSR 1.10.1/2022 (Rate 1182.00) |
| 34 | Wiring point for Plug with 1.50 Sqmm FR PVC insulated multi strand copper conductor cable in PVC conduct pipe concealed in the wall complete with 14 SWG GI earth continuity wire,piano type switch & socket on 3 mm. thick phenolic laminated backelite sheet etc.complete in all respect,as directed.including matching colour wash. (E/M SI N0-134(c))2018 |
| 35 | Supplying and fixing suitable size GI box with modular plate & cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amodular socket outlet and 15/16A modular swithc. connection etc. as required DSR(1.32)/2022A- 100X100X65MM(159/2018) |
| 36 | B- 175X100X65MM(SOR No 161)/2018 |
| 37 | S/Wiring of submain with two number 2.5 sqmm FR but in 20 mm dia heavy duty same as SI 261 (B) PVC insulated multistand copper conductor cable partly concealed in wall and partly laid in slab along with the reinforcement before concreting complete with 8 SWG GI earth continuity wire including matching colour wash ect complete in all respect. (E/M SI N0-261 C) |
| 38 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). SI no 10.28 DSR/2023 (Rate 772.40) Please Enable Macros to View BoQ information |