|
| 1 | Dismantling and clearing of cement concrete of waterproofing etc. in trap stone metal without causing any damage to the structure, clearing the dismantled materials and stacking within a lead of 100 m including all lift , cleaning surface, etc. as directed. All labour and material, tools & plant etc. complete. |
| 2 | Demolishing RCC work in trap stone metal including stacking of serviceable material and disposal of unserviceable material within a lead 0f 100m including all tools & plant, labour, material, providing props, scaffoldings etc. complete. |
| 3 | Extra over item of above for cutting of steel in RCC work (sectional area of the RCC work to be measured including all labour, material tools and plant, scaffoldings etc. complete. |
| 4 | Removing existing plaster carefully by Stripping clearing away the same at places pointed out within a lead of 100m, cleaning the surfaces etc. As directed. All labour & material, tools & plant etc. complete |
| 5 | Exposing existing old & worn out RCC column, beams and slabs etc. up to the main reinforcement carefully by means of chisel and hammer including necessary scaffolding, stacking the same on ground in the compound etc. complete as directed (surface area exposed after final chipping, chiselling etc. will only be measured and paid for). |
| 6 | Cement concrete (1:2:4) using 20 black aggregate as coarse aggregate including mixing, depositing, consolidating, levelling, curing etc. All labour & material etc. complete. |
| 7 | RCC (1:11/2:3) mix using 20mm graded black trap stone metal out of quarried boulders as coarse aggregate , including mixing, placing, consolidating, vibrating, levelling, curing etc. but excluding the cost of shuttering and reinforcement. All labour & material etc. complete. |
| 8 | Providing & fixing shuttering for the columns, beams, lintels etc. of any size and shape including cleaning, oiling, closing, gaps, removing shuttering after concreting, provisions of necessary props, bracings and other supports etc. All labour and material etc. complete |
| 9 | Providing and fixing reinforcement with TMT/tor steel/mild steel including cutting, bending, tying grills, placing in position, holding in position during concreting, including cost of binding wire. All labour and material, tools & plant etc. complete. |
| 10 | Constructing masonry in superstructure such as partition walls, parapets etc. 10 cm thick using precast cement concrete solid blocks having a crushing strength of not less than 35Kg./cm2 (28 days) and a mix not leaner than (1:5:10) in cement mortar (1:4) including providing specially moulded block at junctions and corners, providing 2 M.S. bars 6mm dia at every fourth course, all scaffolding, lifts, raking out joints, curing etc. All labour & material etc. complete. |
| 11 | Finishing with 25mm thick polished cudappa stone slabs over 20mm thick C.M.(1:6).including polishing with black polish All labour & material etc. complete. |
| 12 | Sealing the cracks in walls, RCC members etc. by use of scaffolding or Jhulla for the crack width up to 20 mm using suitable crack fill material of cement and fine quartz sand putty including` necessary addition of chemical in the proportion of 1:1 or as per manufacturer's instruction, properly grouting into cracks after necessary cleaning including applying two coats (100 mm width) of Polyalk WP of approved brand over sealed crack or as directed etc, including removing the roots of plants and grown vegetation. All tools, plants, labour and materials etc. complete (Payment shall be made in running meter of sealed crack). |
| 13 | Thorough cleaning of the exposed steel, removing the scales and rust with wire brush and emery paper and applying suitable chemical viz .'Rusticide','Rust' converter, Zentrifix KMH or equivalent, approved in two coats as per manufacturers specification as and as directed , providing additional bars if required as per existing diameter bar as main reinforcement/ stirrups for beams, columns /chajjas including welding of bar/tying or by ensuring shear connectors to the reinforcement (Reinforcement to be measured under Item no. 19) by drilling holes to beams for anchoring shear connectors ( to be measured under item for drilling and fixing shear connectors), etc. and securing the bars in position etc. but excluding the cost of steel reinforcement. All tools, plants labour and materials etc. complete. |
| 14 | Providing and applying Rust passivator primer NitoZinc of FOSROC or any other approved in ratio as per manufacturers specification after cleaning the existing surface from dust/ loose particles by applying air by air blowers under pressure etc. All labour and material etc complete as directed. |
| 15 | Providing and applying bonding agent in ratio of 2:1 by wt. of Sun epoxy 358,Hack aid plus,plyalk EP of sunanda or equivalents per manufacturers specification after cleaning the existing surface from dust/ loose particles by applying air by air blowers under pressure etc. Complete as directed. |
| 16 | Providing and laying of micro concrete of fosoroc OR any other approved brand including shuttering and preparing the surface ,mixing ,placing in position ..etc. . All labour and materials etc. . Complete. |
| 17 | Plastering with C.M. (1:5) 15mm thick in two coats mixed with approved waterproofing compound in appropriate ratio for external surfaces (Backing coat of 10mm & finishing coat of 5mm) including Patches, bays, bands, fluting, scaffolding and fixing of chicken mesh wereever instructed and cleaning of all dirt's, raking out joints, hacking, scrubbing, chamfers, beading, curing, all lifts etc. All labour & material complete |
| 18 | Plastering with C.M. (1:3) 15mm thick in two coats to internal surfaces (Backing coat of 10mm & finishing coat of 5mm) to walls including paches, bands ,fluting, scaffolding, racking out joints ,including fixing of chicken mesh,hacking, scrubbing and cleaning of all dirt ,chamfers ,beading ,curing all lifts etc.. All labour & material etc. complete |
| 19 | Providing and applying polymer modified cementitious waterproofing coating to the surface with acrylic polymer-polyalk wp of sunanda, Pidicrete URP of Dr fixit Or Tapecrete of CICO or any other approved brand ..etc mixed in cement slurry in ratio of 1:2 or as pecified by the manufacturer in three coats as per the manufacturers specifications with all labour ,scaffolding ..etc complete. |
| 20 | Repairs to existing waterproofing course by providing cement based waterproofing layer on terrace over the existing brickbat coba with CM 1:4(1cement :4 sand)20mm thick with expansive polymer additive conplast 421 IC of m/s. Fosroc or equivalent, finishing top with cement slurry admixed with expansive polymer , including dismantling the plaster up to 300 mm height (above finished level) of parapet,columns,staircase room walls etc and cleaning the base surface , applying approved bonding coat on brickbat coba , treating cracks in the brickbat koba, doing cement slurry grouting wherever necessary , treatment to junctions, any gaps / possible gaps between roof and side walls as well as entrance of rainwater drainage pipes to be properly scrapped / chipped and filled to avoid any seepage to side walls etc. and covings, vata , gola laid to proper slopes, lines and levels and carting away debris and curing.etc.. and making the terrace completely waterproof including 300 mm (above finished level) vertical face on parapet, columns, staircase room walls etc. . (Only profile area of waterproofing shall be measured, vatta will not be paid extra).Carrying out test for water tightness by impounding water for 24 hours etc. complete as per detail specifications as directed .All labour materials tools and p[lants etc complete |
| 21 | Providing & applying/ Treating top surface of roof terrace top along with expansion joints, sun shades, wall junctions, parapet... etc. by applying three coats of weatherproof exterior elastomeric coating with New coat of Dr. fixit, brushbond roofguard of Fososroc or equivalent over a coat of exterior primer coat of Prime seal or equivalent ncluding cleaning the surface, opening and filling the cracks as per manufacturers specifications and instructions and as directed. All materials, labour, tools, equipment, finishing and testing etc. complete. |
| 22 | White washing in two coat over old work/maintenance painting including scaffolding, thoroughly brooming the surfaces to remove all dirt, dust, loose scales of lime wash etc. All labour & material complete. |
| 23 | Painting old (previously painted) iron/metal surfaces with two coat of synthetic enamel paint over a coat of primer of approved make and colour/shade including scrapping , Cleaning and preparing the surface necessary scaffolding/ladder etc. All labour and material complete. |
| 24 | Application of Damp block (Asain/ Berger) paint two coats to control dampness of internal walls / repaired surfaces, scaffolding. All tools, plant, labour and material etc complete |
| 25 | Supplying & erecting in position structural steel work in single section (light sections up to 34 kg./m) incl. Cutting, hoisting, fixing in position and cleaning the surface, painting two coats of approved quality synthetic enamel paint of approved colour/ shade over a coat of red oxide zinc chromite primer etc. All labour & materials tools & plant etc. complete. |
| 26 | Supplying and fixing woven plain G.I wire fencing (chain link fencing of 75mm (3\\") x 8 SWG mesh chain link fencing including fixing to 65 x 65 x 8mm M.S angle posts including providing 2 nos 16mm dia M.S bars at top and bottom of fencing, painting the posts and M.S bars with two coats of synthetic enamel paint over a coat of red lead primer etc. All labour & material etc. complete. |
| 27 | Providing and erecting cup lock /H frame of steel double scaffolding of required height ,width and strength by sides of building at any level from ground to any floor height as directed including working platform etc. and maintaining it in serviceable condition for the required duration as approve and a directed and removing it thereafter,necessary safety features for the workmen etc. complete.as per direction ..etc. . All labour equipment's materials etc. complete. |
| 28 | Supply of mini truck/tempo on hire basid as and when required of 6.00 cum capacity in working condition for 8 hours a day along with driver, required fuels in Port area for transporting building materials, debris ..etc. as directed within a lead of 6.00 kms etc. All fuel, driver, Maintenance etc. complete. |
| 29 | Supply of Tree prunning / chain saw machine- 22 inch petrol operated inluding fuel and oil etc and 01 operator and 01 helper for 8 hours a day including replacement of worn out chain (used for cutting trees) on call basis etc. including cutting of logs in 1mtr size and stacking neatly in place as directed. All labour and material etc complete |
| 30 | Supplying & fixing galvalume sheets of 0.45mm thick of Tata/Jindal or any other equivalent in roofing including drilling holes necessary self drilling screws G.I and bitumen washer etc. All tools,plants,labour and material etc complete. |
| 31 | Supplying & fixing galvalume ridges of 0.45mm thick of Tata/Jindal or any other equivalent in roofing including drilling holes necessary self drilling screws G.I and bitumen washer etc. All tools,plants,labour and material etc complete. |
| 32 | Supply of Bonding agent of NITOBOND SBR (latex) of FOSOROC or any other approved |
| 33 | Repairs to the aluminium frame sliding window, aluminium frame door including removing and refixing the shutters, cleaning the grooves, channels, replacing the worn out runners, rubber beeding but excluding the cost of Glass. All tool, plants, labour, material, etc. complete |
| 34 | Providing & fixing in position anodised aluminium sliding windows of approved manufacturer to suit two track sliding, using best quality standard extruded anodised aluminium sections (manufactured to relevant I.S. specification) without horizontal glazing bars, glazed with 5.5.mm thick sheet glass fixing to RCC column/masonry with lugs of 16mm x 3.15mm x 10cm long or any other approved size embedded in C.C. (1:3:6) blocks of appropriate size incl. necessary bolting devices, handles, locking arrangements, fixing clips, metal putty, PVC/Rubber beading etc. |
| 35 | Providing & fixing in position anodised aluminium sliding windows of approved manufacturer to suit three track sliding, using best quality standard extruded anodised aluminium sections (manufactured to relevant I.S. specification) without horizontal glazing bars, glazed with 5.5.mm thick sheet glass fixing to RCC column/masonry with lugs of 16mm x 3.15mm x 10cm long or any other approved size embedded in C.C. (1:3:6) blocks of appropriate size incl. necessary bolting devices, handles, locking arrangements, fixing clips, metal putty, PVC/Rubber beading etc. |
| 36 | Providing & fixing ornamental grills of approved pattern using M.S. flat, square bars, etc. or any other sections including welding, grinding, cutting, drilling holes, fixing with counter sunk screws etc. All labour & material etc. complete. |
| 37 | Supply of Waterproofing and repair compound Dr.fixit Pidicrete URP |
| 38 | Execution of day to day works by supply of high skilled artisans like Carpenters, masons for works of restorative repairs, aluminium doors and window repairs, shutters and gate repairs etc as directed, with tools for a period of 8 hours per day as and when required etc complete |
| 39 | Execution of day to day works by supply of mazdoor with tools for a period of 8 hours per day as and when required etc complete |
| 40 | Dismantling doors, windows and ventilators having area less than 3.0m2 including removal of frames, fastening etc. from masonry and handing over to Chief Engineers Representative by shifting & stacking at Maintenance Section office Yard at Headland as directed including all tools & plant labour & material complete. |
| 41 | P/F in position anodised aluminium louvered ventilators in single vertical bays with 4.00 mm thick 100 mm wide frosted glass louvers of approved quality / make using best quality standard extra lead anodised aluminium sections comprising to IS-733, frame shall have groove to receiveweather strip all around, glass louvers shall have PVC gap closing gasket on top edge of louvers and approved through lever handle and operation fixed to outer frame and aluminium handle locking device,fixing to masonry, R.C.C. columns etc. as specified by manufacturer all gaps should be sealed with approved sealant etc.including finishing and making good the surface with plaster 1:3, cement concrete mortar, touch up painting for removed old ventilators surface, removing of old ventilators etc. All tools, plant labour & material etc. complete. |
| 42 | Supplying and fixing Flush door shutters of marine solid core 30mm thick both sides teak faced including providing 4 nos. S.S. hinges (100x70x4) mm minimum size teakwood beading patties, brass screws, polishing etc.complete. All tools, plant, labour & material etc. complete. (Old fittings like mortice lock,safety chins, etc.to be refitted to the new door. All tools , plant labour & material etc. complete. |
| 43 | Supplying and fixing PVC single shutter door of standard size including aluminium frame all the accessories fixing to the wall with expandable fasteners, such SS butt hinges of size 100 x 70x4.0 mm, mimimunm 3 nos. per shutter, Including dismantling of old existing door frame and taking away the same etc finishing the damaged surface with CM (1:3), fixed by C.P. brass counter sunk as approved and fixed to the door frame as specified by the manufacturer or as directed complete.All tools , plant labour & material etc. complete. |
| 44 | Providing and fixing Silicone Sealant to the Aluminium window gaps, and gaps of the aluminium frame and walls by using silicone guns for providing sealant . All labour and material etc complete. Please Enable Macros to View BoQ information |
