|
| 1 | Taking down unserviceable chowkhats or frame with shutters(without taking off shuters from the frames) of any description n. exc 1.50Sqm and removing from site and making good disturbed surfaces of wall in CM 1:3 complete all as specified and directed. |
| 2 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.50 sqm and n.exc 4.00 Sqm each and removing from site complete and making good disturbed surfaces of wall in CM (1:3) complete all as specified and directed. |
| 3 | Material and labour 35mm thick factory made solid PVC (Wood plastic composite ) moulded gauged door shutter with wire mesh 0.18mm nominal dia of wire and average width of aperture 1.40mm in any number of division with brown wood grain texture , including S.S wire mesh shall be fixed with 15x15 square tubes in is rails with screwing 8x28mm heat metal Zink coated screws can be remove or fix again after changing of wire mesh when needed . The density shall be as per manufactures instructions complete all as specified and directed. |
| 4 | Material and labour Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. Note: stainless steel butt hinges and necessary S.S screws shall be paid separately |
| 5 | Supply and Fix Factory made single extruded WPC (Wood Polymer Composite) solid door frames/ Chowkhat of size 50x100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant including making good after complete all as specified and directed. |
| 6 | Supply and Fix Factory made single extruded WPC (Wood Polymer Composite) solid door frames/ Chowkhat of size 65x125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant including all fitting making good after complete all as specified and directed. |
| 7 | Supply and Fix Stainles steel butt hinges 100mm long medium weight fixed complete all as specified and directed |
| 8 | Supply and Fix 150 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed |
| 9 | Supply and Fix 150 mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed |
| 10 | Supply and Fix Aluminium door stopper double support with rubber complete all as specified and directed. |
| 11 | Supply and Fix 250mm long Aluminium alloy Anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed |
| 12 | Material and labour for box type steel window 1.25 mm thick made of ERW tube P-Section of size 60 x 25 mm double rebated outer frame comprise of glazed skeleton shutter(two gauged shutters and two glazed shutter) of ERW tube P-Section size 50 x 20 mm and 1mm thick one/two Nos openable leaf consisting of two Nos sash bar of T-Section 20x3mm welded to frame with one No Vertical mullion of ERW box type T-Section of size 60 x 25 mm and 1.25 mm thick and FI 2 mm thick welded / screwed to frame for fixing of glass including fittings and fixture like Handle, Tower Bolt, stopper, cleat, pintal hinges, hold fast etc. as mentioned below:-(a) Hold Fast, 150mm long of 120mm x 3 mm made to shape -04 Nos per window. (b) Handle of Z sec 20mm x 25mm, 100 mm long -1 No per leaf.(c) MS Tower bolt 150mm long - 2 No per leaf.(d) Z Sec 20mm x 25 mm, 100 mm long stopper - 1 No per leaf.(e) Cleat 55 mm long of hollow square 15mm x 20mm x.63mm welded to hinge -1 No per leaf.(f) MS Pintal hinges of size 75mm x 12mm - 2 Nos per leaf.(g) 12 mm square guard bar, 10 cm centre to centre.(h) 25x4 mm flat iron all around for joint of both frame.(j) One shop coat of red oxide primer and two coats of Synthetic enamel paint to MS window and guard bar.Note: (i) Including taking down old steel window and making good dismantled portion with PCC 1:2:4 type B0 including hold fast PCC (four No’s for Each window) & around required plaster in CM 1:4 and match with existing finishing complete all as specified and directed.(ii) sheet glass and wire mesh shall be measured and paid separately) |
| 13 | Material and labour for box type steel ventilator made of ERW tube P-section of size 60mmx25mm outer frame (single rebated ) of ERW and FI 2mm thick welded /screwed to frame for fixing of sheet glass including fixtures and fittings like a stopper , cleat , pintal hinges , holdfast etc all as shown on drg No CEJZ/TD/1019/08 sheet 1/3 to 3/3 dt 01 May 2008 complete all as specified and directed.(a) 10mm Sq Guard bar 10cm C/C(b) One shop coat of red oxide and two coats of synthetic enamel paint to MS ventilator and gaurd bar (c) MS Tower bolt 150mm long - 2 No per leaf (d) Z Sec 20mm x 25 mm, 100 mm long stopper - 1 No per leaf Note:(i) Including taking down old steel ventilator and making good dismantled portion with PCC 1:2:4 type B0 including hold fast PCC (four No’s for Each window) & around required plaster in CM 1:4 and match with existing finishing complete all as specified and directed.(ii) sheet glass and wire mesh shall be measured and paid separately) |
| 14 | Supply and Fix GI wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.4 mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and directed. |
| 15 | Supply and Fix Sheet glass, 3mm thick ordinary quality, in squares, not exceeding 0.50 sqm in each pane fix with oil putty complete all as specified and directed. Note : upto four storey height including all scaffolding work |
| 16 | Supply and Fix in repair Sheet glass, 3mm thick ordinary quality, in squares, not exceeding 0.50 sqm in each pane fix with oil putty, complete all as specified and directed. Note: upto four storey height including all scaffolding work ) |
| 17 | Supply and Fix in repair GI wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.4 mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and directed . |
| 18 | Taking down cement plaster on brick/stone/concrete walls /ceiling incl racking out joints etc,hacking for key, scrubing down with water etc & dispose off debris upto a distance n exc. 500 mtrs where directed ,complete all as specified and directed.Note :- rate applicable upto four storey height incling all scaffolding work |
| 19 | Material and labour for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces on walls in CM 1:6. finishing even and smooth without using extra cement complete all as specified and directed. |
| 20 | Material and labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:4. finishing even and fair ,complete all as specified and directed. WPC shall be measuared seperatly and paid @ 200ML for 50kg cement bags or as per manufacturer's instructions.Note :- rate applicable upto four storey height incling all scaffolding work Please Enable Macros to View BoQ information |
| 21 | Material and labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:4. finishing even and fair ,complete all as specified and directed. WPC shall be measuared seperatly and paid @ 200ML for 50kg cement bags or as per manufacturer's instructions.Note :- rate applicable upto four storey height incling all scaffolding work Please Enable Macros to View BoQ information |
