|
| 1 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete. |
| 2 | Use and waste formwork to soffits of suspended slabs such as roof slab, floor slabs landings and sgh finished surfaces of concrete flat. |
| 3 | M&L for RCC 1:2:4 type B-1, Slab supported on walls,beams and columns in floors,roof, landing, balconies,in type B1(20mm graded aggregate). |
| 4 | M & L for mild steel TMT bars ,10mm dia and over , cut to length , bent to shspe required incl cranking , bending spirally for hooping for coloumns , hooking ends andbionding with (annealed) not less than 0.90 mm dia all a specified and directed |
| 5 | Demolition of cement concrete in ground floors and pavings n.exc 15cm thickness (below or above ground level). |
| 6 | M&L 75 mm thick PCC (1:4:8 ) type D-2 as in sub base finished even and rough complete all as specified and as directed. |
| 7 | M&L for 25mm thick PCC 1:2:4 type B-0 (12.5mm graded stone aggregate) as in level course with finshining in cement concrete surface even and rough to receive screed bed complete |
| 8 | Dismantling floor, hearth, wall tiling including taking down plastering in cement mortor removing serviceable tiles to store and rubbish off the premises |
| 9 | M&L for double charged premium quality Vitrified tiles 9 to 10 mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed or bedding Layer in cement mortar 1:6 complete all as specified and directed. |
| 10 | M&L for double charged premium quality Vitrified tiles 9 to 10 mm thick light shade (square/ rectangular) polished, area of each tiles tiles not exceeding 0.36 sqm, in skirting/ dado or verticle surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick plaster in CM 1:4 complete all as specified and directed. |
| 11 | M&L for Matt finish Vitrified tiles thickness not less than 10 mm light shade (square/ rectangular) polished, area of each tiles n exc 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed or bedding Layer in cement mortar 1:6 complete all as specified and directed. |
| 12 | M&L Joint free Non-skid coloured ceramic tiles 7 to 10 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry over screed bed of 15 mm thick 1:6 and pointed in white or coloured cement to match complete all as specified and as directed |
| 13 | M&L Glazed coloured ceramic tiles in verticle surfaces 450 x 300 x 7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match with backcoat of screed bed or bedding layer 10mm thick 1:4 and pointed in white or coloured cement to match complete all as specified. |
| 14 | M&L Digital Series of fully glazed GVT finish cemaric wall tiles of size 600x1200x10mm set and jointed in neat cement slurry and pointed in coloured cement to match laid over 10mm thick backing coat in cement mortar 1:4, shade as approved by GE complete all as specified and as directed. |
| 15 | M&L for 15 to 18mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete over cement screed bed 15mm thick 1:4, complete all as specified and directed by Engineer in charge. |
| 16 | S&F CP Divertor of concealed body for single lever hi-flow diverter 35mm cartridge with button assembly, operating liver, cartridge sleeve, wall flange, button assembly sleeve & button complete all as specified and as directed by Engr-in-Charge. |
| 17 | S&F CP brass Spout for diverter 15 mm dia bore make as approved by GE complete all as specified. |
| 18 | S&F wash hand basin of vitreous china table top size 550mm x 400mm x 160mm, PVC waste pipe 32mm dia, waste coupling brass chromium plated and including cutting complete all as specified and directed. |
| 19 | S&F Wall mounted single lever Basin mixture with valve flange concealed single body incl operating lever, cartridge sleeve, wall flange, nipple & spout incl all necessary fixing accessories complete all as specified and as directed by Engr-in-Charge. |
| 20 | S&F Urinal fullstall size 480 x 300 x 740mm with automatic sensor flushing valve incl all necessary fixing accessories complete all as specified and as directed by Engr-in-Charge. |
| 21 | S&F curved shaped Urinal partition with frosted glass 8mm thick size 900 x 450 mm incl all necessary fixing accessories complete all as specified and as directed by Engr-in-Charge. |
| 22 | S&F one piece floor mounted vitreous china EWC with integrated flushing cistern size 670x365x735 mm, soft closing seat cover and necessary nut/bolt for fixing complete all as specified and as directed by Engr-in-Charge |
| 23 | M&L for Vitreous china premium/ 1st quality wash down water closet wall hung WC white/ ivory/off white Rimless Wall Hung WC size 355 x 555 x 370 mm with PP soft close slim seat cover, Hinges, incl all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe) complete all as specified and as directed by Engr-in-Charge. |
| 24 | M&L for single piece slim concealed PVC flushing cistern body with installation kit & 'P' type drain pipe connection set for wall hung WC with two open knob option with flush control plate incl all necessary fixing accessories complete all as specified and as directed by Engr-in-Charge. |
| 25 | Taking up or down GI Water Tubing/PPR pipes 15/16mm dia (bore) including Connections and Fittings, segregating serviceable Pipes & Fittings and Stacking properly at Site(s) for re-use, complete all as specified and as directed. |
| 26 | M&L for 3-layer PP-R (Polypropylene random copolymer) outer diameter of pipes 20 mm (Inner dia 14.40 mm) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified. |
| 27 | M&L for cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades shelves, lintels etc, and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10cm girth all as specified and as directed |
| 28 | S&F in repair 15mm dia bib taps CP Brass with Capstanhead, screwed down, screwed for iron pipe of bore 15mm complete. |
| 29 | S&F in repair brass Chromium plated Basin Mixer valve hot and cold screwed down for iron pipe complete . |
| 30 | S&F in repair Brass CP Wall mixer for mixing hot & cold water (3 in 1) screwed down for iron pipe and fixed bore of pipe 15mm complete all as specified . |
| 31 | S&F in repair Angle Cock,15mm fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. |
| 32 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 33 | S&F in repair Brass chromium plated shower rose 125mm size with shower arm, including fixing to steel pipe or union complete all as specified and directed. |
| 34 | S&F toilet paper holder with flat recessed type stainless steel complete all as specified by Engr-in-Charge |
| 35 | S&F Glass shelf 450 x 125 x 6MM (with ABS Bracket chromium plated bracket guard and SS railing complete all as specified and as directed |
| 36 | Supply& Fixing tubular towel Rail CP Brass, chromium plated D type with CP Brackets, 600 mm long between flanges all as specified. |
| 37 | Supply & Fixing vitreous china wash basin with pedestal, white, flat back, size 550mm x 400mm, including brackets, PVC waste pipe 32mm dia, waste coupling brass, chromium plated and including cutting for and pinning in ends of brackets or erecting stand, fixed in repairs complete all as specified and directed. |
| 38 | Dismantling of PVC / CI pipe 100mm dia jointed in cement mortar and taking out of trench if required complete all as specified. |
| 39 | Dismantling of PVC / CI pipe 75mm dia or less jointed in cement mortar and taking out of trench if required complete all as specified. |
| 40 | S&F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls and making good with cement mortor 1:3 complete all as directed. |
| 41 | S&F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in trenches or in floorsand making good with cement mortor 1:3 or with PCC 1:2:4 complete all as directed. |
| 42 | S&F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls and making good with cement mortor 1:3 or with PCC 1:2:4 complete all as directed. |
| 43 | S&F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in trenches or in floors and making good with cement mortor 1:3 or with PCC 1:2:4 complete all as directed. |
| 44 | S&F in repair PVC 110 mm bore Bend complete all as specified and as directed. |
| 45 | S&F in repair PVC (SWR) junction single, (Single T) equal or unequal with access door in 110 mm bore. |
| 46 | S&F in repair PVC 75 mm bore Bend complete all as specified and as directed. |
| 47 | S&F in repair PVC 75 mm bore Bend with access door complete all as specified and as directed. |
| 48 | S&F in repair PVC (SWR) junction single, (Single T) equal or unequal with access door in 75 mm bore. |
| 49 | S&F in repair PVC (SWR) vent cowl 110 mm bore complete all as specified and as directed. |
| 50 | S & F in repairs for PVC (SWR) floor/Nahani trap 75 mm dia outlet, plain with grating including jointing with solvent cement to waste pipe, fixed in cement concrete type B-1 (1:2:4) |
| 51 | Supply & fixing in repair PVC Flushing Cistern 10 litre capacity, Low Level Valve Less, Symphonic Action type, White, with Inlet, Ball Valve, Float and Handle including 32mm dia PVC Flush Pipe, a Pair of MS Brackets,CP flush bend including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 including taking down unserviceable Flushing Cistern and connected Items of any description, complete all as specified and as directed. |
| 52 | S&F in repair PVC Connections 600mm long complete all as specified. |
| 53 | S&F selected quality looking mirror bevelled edge 5.5mm thick selected quality glass, mounted on 6mm thick commercial plywood, including moulding of all round edges of looking mirror and fixed to wooden plug with appropriate nos CP brass screwed cup washers complete all as specified and directed. |
| 54 | S&F Decorative Stainless steel tubular curtain rail of 25mm dia incl six nos curtain ring per running mtr and one number of brackets on each end and one no of globe on each end of the rod per opening of door / window (make and materail approved by Engineer-in-charge) complete all as specified and directed. |
| 55 | S&F 18mm thick Plywood, grade BWR, type BB, incl PVC lipping on face fixed with screws to timber frame work complete all as specified and as directed |
| 56 | M&L for 0.9mm thick decorative laminate type 1 of surface finish, colour and patters as approved, fixed with approved adhesive as per manufacturer's insturctions, complete all as specified. |
| 57 | M&L for stainless steel telescopic channel for drawers not less than 45 cm long complete all as directed. Make : Hettich or equivalent as approved by Engr-in-charge |
| 58 | S&F Push to open Magnetic Catches for kitchen cabinet doors complete all as specified Make Hettich or equivalent as approved by Engr-in-charge |
| 59 | S&F Stainless sensys soft close 0 crank concealed slide on cabinet Hinge, a base of 12.5 (crank 0 degree) with mounting plate (shutter thickness 15-24mm) complete all as specified and directed |
| 60 | S&F Stainless Steel Decorative Cabinet Handle 100 mm complete all as specified and directed |
| 61 | Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) any thickness, including cover fillets but without frame work. |
| 62 | Supply & fixing PVC 5 to 6mm thick hollow PVC wall panelling including all fixing viz, U and L as design and pattern including all necessary framed works as per manufacturers instruction, make and design as approved by GE complete all as specified and directed |
| 63 | S&F for Wooden deorative timber wall panelling with wood planks 12mm thick 2nd class softwood with tounge & grooved wooden panels and edges tongued and grooved or rebated fixed with gun screws/nails, including preparation of surface by sand papering, necessary base coat and PU wood polishing result in a smooth and glossy finish, wall panelling and polishing as per approved pattern and design complete all as specified and as approved by GE |
| 64 | M&L for PVC 5 to 6mm thick hollow PVC Ceiling as in flat surface including all fixing viz, U and L as design and pattern, including Gl frame work as flat surface approved as in ceiling comprising of Gl perimeter channel 0.55mm thick with two unequal flanges of 20mm and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm center to center/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm center to center with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.50mm fixed to the intermediate channel at 457mm center to center fixed with hanger of Gl channel made out of GI channel used in ceiling as above upto 1200 mm length in roof slabs by means of ceiling cleats complete all as specified and directed by Engr-in-Charge. |
| 65 | M&L for PVC 8 to 9mm thick hollow PVC Ceiling as in curved, sunken or raised surface of any design as approved including all fixing viz, U and L as design and pattern, inlcuding GI frame work for curved, sunken or raised for any design as approved as in ceiling comprising of Gl perimeter channel 0.55mm thick with two unequal flanges of 20mm and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm center to center/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm center to center with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.50mm fixed to the intermediate channel at 457mm center to center fixed with hanger of Gl channel made out of GI channel used in ceiling as above upto 1200 mm length in roof slabs by means of ceiling cleats complete all as specified and directed by Engr-in-Charge. Note :- Flat area will be measured. |
| 66 | S&F Powder coated galvanised iron frame work for seamless ceiling size 600mm x 600mm with main runner 38 x 24 x 0.90mm thick, cross tee 29 x 24 x 0.90mm thick and wall angle 24 x 24 x 0.90mm thick duly suspended with 6mm dia GI bar hangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purlin from the roof with alignment clip complete all as specified and as directed. |
| 67 | S&F 6mm thick Non Asbestos fibre cement building boards/Pre Laminated self embossed texture designer E-Board classic (Size 0.60M x 0.60M/0.60M x 1.2 M), HPSC (High pressure steam cured) to be fixed or laid/inserted to existing/new timber/GI/Aluminium/MS framework with screws as in ceiling complete all as specified and directed. |
| 68 | Demolition of brick work built in cement mortar all as specified |
| 69 | Material & Labour for brick work with sub class `B’ bricks, straight on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed. |
| 70 | Taking down cement plaster on brick or stone walls etc raking out joints hacking for key scrabbing down water etc complete. |
| 71 | M&L for 15mm thick cement plaster in CM (1:4) on fair faces of brick or concrete surfaces using WPC where ever required as per manufacturerer's instructions and finishing the surface even and smooth (without using extra cement) etc. incl finishing even and fair complete all as specified NOTE -WPC shall be measured and paid separetely. |
| 72 | M&L for rendering 15mm thick on fair faces of brick work in CM 1:6 finished even and fair without using extra cement complete. |
| 73 | Supply only WPC complete all as specified and directed. |
| 74 | M&L for 2mm thick wall care putty on wall complete all as specified and as directed |
| 75 | Preparing new plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion, white or tinted over & including a coat of primer complete. |
| 76 | M&L for preparation of newly plastered surfaces of wall applying a layer of wall care putty 2mm thick (averaging) , Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed |
| 77 | Notes :- Amount of Credit Schedule for Schedule 'A' Part-ll shall be deducted from total quoted amount of BOQ to arrive at the contract sum. Please Enable Macros to View BoQ information |
