|
| 1 | Excavation work by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50m. DSR (2.8.1) |
| 2 | Construction of Water Bound Macadam using locally available material (Table 400.13). Providing, laying spreading and compacting local material in block or large discrete particles, such as kankar, Laterite, Dhandla etc.as per P.W.D.S.O.R. MORD sl no.:- 4-12. |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). DSR (4.1.8) |
| 4 | M-100 Brick work in 1:4 cement and sand mortar including supply of all material, labour and T&P etc..as per S.O.R. no-75290,chapter no-11. 5.2. |
| 5 | Plain cement concrete Nominal mix 1:2:4 as per DSR no. 4.1.3 |
| 6 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement- All work up to plinth level : 1:1.5:3 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). DSR 5.1.3 |
| 7 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). DSR No.:- 5.2.2 |
| 8 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tensile steel bars. DSR No.:- 5.22.1 |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form work. For foundation, footing, base of column. DSR No.:-(5.9.1) |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form work. Lintels, beams, plinth beams, girders, bressumers and cantilevers. DSR:-5.9.5 |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form work. Columns, Pillars, Piers, Abutments, Posts and Struts. DSR:-5.9.6 |
| 12 | 12 mm cement plaster of mix 1:6 (1 cement:6 fine sand) DSR No. (13.1.2) |
| 13 | Finishing walls with water proofing cement paint of required shade New work (Two or more coats applied @ 3.84 kg/10 sqm)DSR:(13.44.1) |
| 14 | Steel work in built up section/ framed work including cutting hosting,fixing in position and applying a priming coat of approved steel primer using structural steel etc.(In grating frames guard ladder railing brackets gates and similar works) DSR No. 10.25.2 |
| 15 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 1.0 mm thick with zinc coating not less than 275 gm/m². DSR no.:-(12.1.2) |
| 16 | Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. DSR No.12.4 |
| 17 | Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete. DSR No.12.7.1 |
| 18 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes. 110 mm diameter. DSR no.:- (12.41.2) |
| 19 | Providing and fixing stainless steel pipe and fitting of grade 316L as per 1S:6911:2017 and conforming to EN-10312 standards complete with press type fitting including fixing of pipe with clamps at 1.00 m i.c all.15mm dia DSR no.:- (12.41.2) Please Enable Macros to View BoQ information |
