|
| 1 | Civil |
| 2 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.12.1.1 1.00 mm thick with zinc coating not less than 275 gm/m² |
| 3 | Steel work in built up tubular ms grill (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 10.16.2 Hot finished tubes |
| 4 | Providing and laying C.C pavement of Mix M-25 with ready mixed concrete from batching plant.The ready mixed concrete shall be laid and finished with screed board vibrator vacuum dewatering process and finally finished by smooth finish as per direction of Engineer in charge |
| 5 | 14.4 Making the opening in brick masonry including dismantling in floor or walls by cutting masonary and making good the damages to walls, flooring and jambs complete to match the existing surface including disposal to mulba/rubbish to the nearest municipal dumping ground,all complete as per the direction of Engineer-in-charge. |
| 6 | Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. |
| 7 | 2.6 Earth work in excavation by mechanical means (Hydraulic excavator )/manual means over areas (exceeding 30 cm in depth ,1.5m width as well as 10 sqm on plane) including getting out and disposal of excavated earth lead upto 50m and for all lift,as directed by Engineer-in-charge 2.6.1 All kind of soil |
| 8 | Providing and laying in position plain cement M10 concrete for levelling course for all works in foundations The granite /trap/basalt crushed graded coarse aggregates and fine aggregates as per relevent IS code machine mixed,laid in layers not exceeding 150 mm thickness,well compacted using plate vibrators,including all lead & lift ,cost of materials of quality ,labour etc |
| 9 | Providing and installing an(upvc) exhaust-type ventilation system in the existing fully covered Kabaddi shed/gym by cutting the existing wall/roof sheeting and fixing exhaust units to improve air circulation .This work involves the cutting the existing sheet and providing exhaust system as per the direction of engineer in charge |
| 10 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 11 | Providing & fixing of 3-track x 2-panel(with mesh) sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6 PHR with TPE (Thermo Plastic Elastomer) and lead free, gaskets -grey color having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 44mm width x 40mmheight with reinforcement of 1mm thickness and Sash with overall size of 27mm X 53mm with UPVC honeycomb structure inside in lieu of GI reinforcement. Coextruded Glazing bead for fixing of glass shall be of size 9.5mm x 21.5mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with Crescent Locks. Wall thickness of frame & sash shall be of 2 mm,window sizes as per site requirements.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) |
| 12 | Wall painting with acrylic emulsion paint,(exterior paint weather resistence) having VOC (Volatile Organic Compound) content less than 50 g/L, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats as per specifications and as per directions of Engineer in charge. |
| 13 | Scraping and scarifying the existing wall surface to remove old paint, loose plaster, dirt, dust, and other foreign materials using manual tools such as scrapers, wire brushes, sandpaper, etc., to make the surface suitable for application of primer or paint. The work includes cleaning the surface thoroughly, minor surface preparation, and disposal of debris from the site as directed by the Engineer-in-Charge.The rate shall include all labour, tools, equipment, scaffolding if required, and complete surface preparation as per specifications. |
| 14 | Providing, fabricating, supplying, and fixing of Mild Steel (MS) Door including frame, shutters, hinges, locking system,welding and all accessories, complete as per drawings and site requirements. |
| 15 | Supply of 400 mm sweep wall-mounted fan, 230V, 50Hz, single phase, copper wound motor, complete with oscillation mechanism, safety grill, mounting bracket, regulator and all accessories, conforming to IS 374, from approved makes.” |
| 16 | Providing, laying, connecting, testing and commissioning of electrical wiring for wall-mounted fans, complete with suitable size FRLS copper conductor wires in PVC conduit, including modular switch, electronic step-type regulator, fan hook box, earthing, and all necessary accessories, complete in all respects, as required. The connection shall be taken from the nearest main distribution board (DB) as directed by the Engineer-in-Charge. |
| 17 | Supply, installation, testing, and commissioning of air cooling systems (air coolers) for Gym and Kabaddi Indoor Hall, including all accessories, electrical connections, Switchboard (if , supports, and civil works as per the direction of Engineer in charge Please Enable Macros to View BoQ information |
