|
| 1 | Part-A Civil WorkDismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. DSR 15.56/2023 |
| 2 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. DSR 15.3/2023 |
| 3 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand)DSR 6.4.1/2023 |
| 4 | Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform. DSR 5.9.3/2023 |
| 5 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). DSR 5.3/2023 |
| 6 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. DSR 5.22A.6/2023 |
| 7 | 12 mm cement plaster of mix 1:4 (1 cement: 4 coarse sand) DSR 13.4.1/2023 |
| 8 | Earth work in embankment in ordinary soil loam clay and sand. Earthwork in cutting will be with 1.5m lift and 30cm lead earth for filling will be brought from a distance of 8km including cost of earth, loading, unloading, spreading 20cm layer all complete as per engineer in charge. PWD SOR 2025 |
| 9 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources). DSR 4.1.4/2023 |
| 10 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Double charge vitrified tile polished finish of size Size of Tile 600 x 600 mm. DSR 11.41A.1.1/2023 |
| 11 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. DSR 8.31/2023 |
| 12 | Construction of Granular Sub-Base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, compacted of work. as direted by Engineering in incharge. stone ballast granullar 53mm to 26.50mm @27.56%,26.5 to 9.5 mm @22.5%,9.5 to 4.75 mm @10%,4.75 mm below @mm below @40% all complete. |
| 13 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50 mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.80 mm thick C.C. paver block of M-35 grade with approved colour design and pattern. DSR 16.91.2/2023 |
| 14 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. DSR 9.21.1/2023 |
| 15 | Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4 mm thick aluminium composite panel material consisting of 3 mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5 mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc.The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium items. The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places. DSR 8.32/2023 |
| 16 | Providing fixing thermal insulation of ceiling (under deck insulation) with Resin Bonded Fibre glass wool conforming to IS : 8183, density 24kg / m3, 50 mm thick, wrapped in 200 G Virgin Polythene bags, fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5 mm x 24 gauge wire mesh, for top most ceiling of building. DSR 12.34/2023 |
| 17 | Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution. DSR 13.53.1/2023 |
| 18 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. DSR 13.80/2023 |
| 19 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm). DSR 13.47.1/2023 |
| 20 | Part-B SaintaryProviding and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc15 mm nominal dia Pipes (DSR18.8.1/2023) |
| 21 | 20 mm nominal dia Pipes (DSR18.8.2/2023) |
| 22 | 25 mm nominal dia Pipes (DSR18.8.3/2023) |
| 23 | 32 mm nominal dia Pipes (DSR18.8.4/2023) |
| 24 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required Stainless Steel AISI-304(18/8) Orissa pattern W.C. pan of size 585x480 mm with flush pipe and integrated type foot rests DSR 17.1.2/2023 |
| 25 | S/F 100 mm dia Nahani trap India make of approved heavy quality complete with CP brass gratings Nahani trap laid over base ceoment concrete 1:6:12 ISI marked including supply of all materials, labour T&P ctc. Required for proper completion of the work. (P.S.R) |
| 26 | Providing and fixing soil, waste and vent pipes 100 mm dia Sand cast iron S&S pipe as per IS: 1729 DSR 17.35.1.1/2023 |
| 27 | Providing and fixing collar 100 mm Sand cast iron S&S as per IS - 1729 DSR 17.57.1.1/2023 |
| 28 | Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter 100 mm. DSR 17.58.1/2023 |
| 29 | Construction of brick masonary inspection chambers 0.45 m x 0.5m x 0.60m as per standard design with base concrete 1:6:12, 23 cm thick brick wall in 1:6 cement and coarse sand, plastering 1:4 cement and coarse sand with neat finish including RCC cover 8 cm thick including supply of all materials, labour T&P ctc. required for proper completion of the work. DSR-19.30.1/2023 |
| 30 | Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete 150 mm diameter. DSR 19.1.2/2023 |
| 31 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required 510x1040 mm bowl depth 250 mm. DSR 17.10.1.1/2023 |
| 32 | Providing and fixing brass stop cock of approved quality 15 mm nominal bore. DSR 18.16.1/2023 |
| 33 | Providing and fixing uplasticised PVC connection pipe with brass unions 30 cm length 15 mm nominal bore. DSR 18.21.1.1/2023 |
| 34 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet 100 mm diameter. DSR 18.22.1/2023 |
| 35 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. DSR 18.48/2023 |
| 36 | Providing and fixing PTMT soap Dish Holder having length of 138 mm, breadth 102 mm, height of 75 mm with concealed fitting arrangements, weighing not less than 106 gms. DSR 18.65/2023 |
| 37 | One urinal basin with 5 litre white P.V.C. automatic flushinq cistern. SOR 17.4.1/2022 |
| 38 | Supply and laying 160mm internal dia P.V.C. Finolex or Jindal make pipe of 10kg/sqcm pressure with all fitting as socket, bend, Tee, Cross etc. complete and including supply of all materials, labour and T&P etc. required for proper completion of the work.(PSR)2723/mda/ee/2022 |
| 39 | Providing and fixing gun metal non- return valve of approved quality (screwed end): 40 mm nominal bore DSR-18.19.3.1 Horizontal/2023 |
| 40 | Providing and fixing gun metal non- return valve of approved quality (screwed end): 25 mm nominal bore DSR-18.19.1.1 Horizontal/2023 |
| 41 | Submersible with stator 01 job item (PA Rate of Bond No. 2759/2023)3HP Complete in all respect Kirloskar make only. |
| 42 | Singnl phase 10mm Submersible Copper wire (PA Rate of Bond No. 2759/2023) |
| 43 | S/L of 25mm dia heavy guage 16 SWG (2 mm thick) rigid steel sonduit complete with bends and other acessories as required and 14 SWG fish steel wire etc in slab alongwith reinforcement before concreting and plastering etc, complete in all respect. (PWD SI No- 282A)/2018 Ele. |
| 44 | Part-C Electrical itemsS/L OF PVC CONDUIT COMPLETE WITH BEND 25MM DIA.SOR NO. 149A/2018 |
| 45 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group A. DSR 1.1.1/2022 |
| 46 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 X 4 sq. mm + 1 X 4 sq. mm earth wire. (P.S.R) C.B NO.2706/MDA/2022 |
| 47 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 6 sq. mm + 1 X 6 sq. mm earth wire. (P.S.R) C.B NO.2706/MDA/2022 |
| 48 | Wiring point for Plug with 1.50 Sqmm FR PVC insulated multi strand copper conductor cable in PVC conduct pipe concealed in the wall complete with 14 SWG GI earth continuity wire,piano type switch & socket on 3 mm. thick phenolic laminated backelite sheet etc.complete in all respect,as directed.including matching colour wash. (E/M SI N0-134(c))2018 |
| 49 | Supplying and fixing suitable size GI box with modular plate & cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amodular socket outlet and 15/16A modular swithc. connection etc. as required DSR(1.32)/2022A- 100X100X65MM(159/2018) |
| 50 | B- 175X100X65MM(SOR No 161)/2018 |
| 51 | C- 250X200X65MM(Sor-162/2018) |
| 52 | Wiring point for light with 1.50 Sqmtr F.R PVC insulated multi strand copper conductor cable in PVC conduit pipe partly concealed in the wall complete with 8 SWG GI earth continuity wire,piano type switch &ceiling rose/angle/batten holder on 3 mm. thick phenolic laminated backelite sheet etc.complete in all respect,as directed.including matching colour wash (E/M SI N0-131(c)) 2018 |
| 53 | S/Wiring of submain with two number 2.5 sqmm FR but in 20 mm dia heavy duty same as SI 261 (B) PVC insulated multistand copper conductor cable partly concealed in wall and partly laid in slab along with the reinforcement before concreting complete with 8 SWG GI earth continuity wire including matching colour wash ect complete in all respect. (E/M SI N0-261 C) Please Enable Macros to View BoQ information |
