|
| 1 | Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil : |
| 2 | Supply and laying stone solling graded material ( quarry) i/c consolidation in layers , i/c cost and carriages of material from source to site. |
| 3 | Supplying and filling in plinth with fine sand under floors including, watering,ramming, consolidating and dressing complete. |
| 4 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 5 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 6 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 7 | Steel reinforcement for r.c.c. Work including straightening, cutting, bending, placing in position and binding all complete upto plinth level thermo-mechanically treated bars of grade fe-500d or more. |
| 8 | Form workCentering and shuttering including strutting, propping etc. And removal of form for:Foundations, footings, bases of columns etc. For mass concrete. |
| 9 | Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. |
| 10 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in 1:4 cement mortar up to level 5 |
| 11 | 12mm cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand) |
| 12 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick |
| 13 | Finishing walls with 100% premium acrylic emulsion paint havingvoc less than 50 gm/litre and uv resistance as per is 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives. 13.94.1 new work (two or more coats applied @ 1.43 litre/10 sqm. Over & including priming coat of exterior primer applied @ 0.90 litre/10 sqm. |
| 14 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is:15622 of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. Complete using 3mm spacer and filled with epoxy grout in fill, 300x600/ 400x400 gvt |
| 15 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or withdash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): first class kail wood |
| 16 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including isi marked m.s. Pressed butt hinges bright finished of required size with necessary screws., first class kail wood 30mm thick |
| 17 | Providing and fixing wire gauze shutters using galvanized m.s. Wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with isi marked m.s. Pressed butt hinges bright finished of required size with necessary screws as per direction of engineer-in-charge : 30mm thickiind class kail wood |
| 18 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of engineer-in-charge. (note: -butt hinges and necessary screws shall be paid separately). 30mm thick ist class kail wood |
| 19 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.iind class kail wood |
| 20 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. |
| 21 | Providing hoisting and fixing trusses/purlins /rafters/posts/ post-plates or like components including cost of screws etc. Complete fir/budloo poplar wood |
| 22 | P/f hi rib 0.50mm thick colour coated cgi sheets i/c ridges + valleys all complete job |
| 23 | Providing and fixing isi: 12817 marked stainless steel butt hinges with stainless steel screws etc. Complete 125x64x1.90 mm |
| 24 | Providing and fixing aluminum tower bolts isi marked anodized (anodic coating not less than grade ac 10 as per is : 1868) transparent or dyed to required colour or shade with necessary screws etc. Complete :100x10 mm |
| 25 | 200x10 mm |
| 26 | Providing and fixing aluminum handles isi marked anodized (anodic coating not less than grade ac 10 as per is: 1868) transparent or dyed to required colour and shade with necessary screws etc. Complete. 100mm |
| 27 | 300 mm handles, main door |
| 28 | Providing and fixing aluminum casement stays, isi marked, anodized (anodic coating not less than grade ac 10 as per is : 1868) transparent or dyed to required colour or shade with necessary screws etc. Complete : |
| 29 | Providing and fixing bright finished brass door latch with necessary screws etc. Complete. 300x16x5 mm |
| 30 | Providing and fixing plained eaves boarding. Budloo woood 300x30mm |
| 31 | P/f of 12mm thick t&g planks made of imported wood (new zealand pine or equivalent) for roof soffits & ceiling on wood work in false ceiling, partitions sawn and putup in position in budloo wood (ceiling joists). Including cost of necessary adhesive & cost of nails etc. With necessary cornice of required size complete job. Incl cost of nails / screws all complete as approved by engineer-in-charge (including cost of all material, leads, lifts and carriages etc upto site of work complete). Soffits |
| 32 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). |
| 33 | Providing and fixing 3 layer pp-r (poly propylene random copolymer) pipes conforming to is: 15801, uv stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all pp-r plain and brass threaded polypropylene random fittings. This includes testing of joints complete as per direction of engineer-in charge. Internal work concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. I/c all fittingsPN`-16 pipe , 25mm od(sdr-7.4) |
| 34 | Providing and fixing ppr unions ppr union 25 MM |
| 35 | P/l swr pipes pvc b- type i/c all fittings and accessories all complete job110mm i/c collars |
| 36 | 75 mm i/c collars |
| 37 | P trap 110mm |
| 38 | Door bend/plain bend 110mm |
| 39 | Door bend/plain bend 75mm |
| 40 | Pvc floor trap |
| 41 | Floor jalli cp 4\\" |
| 42 | Constructing masonry chamber of specified size, in brick work with common burnt clay (non modular) bricks of class designation 7.5 in cement mortar 1:4 (1cement :4 coarse sand) and r.c.c. Top slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size ) including necessary excavation, foundation concrete 1:5:10 (1 cement :5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design chamber 60x60x75 cm |
| 43 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. |
| 44 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer |
| 45 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 46 | Supply, Installation , Testing And Commissioning Hot Water Geyser 50 L Capacity Racold/Venus |
| 47 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 48 | Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. |
| 49 | P/F PVC Connections 24\\"/18\\" |
| 50 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete: 32mm dia |
| 51 | P/F CP Wall Mixer Superior Quality |
| 52 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing rectangular |
| 53 | Supply and installation health faucet with spray and tube 15mm nominal dia |
| 54 | P/f twin angle valve |
| 55 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 25MM PPR |
| 56 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-incharge. |
| 57 | P/F CP Soap Case |
| 58 | Towel Ring 450MM |
| 59 | Towel Rail 600MM |
| 60 | Supply and laying precast tiles 25mm ( sm beton tiles) over cement mortar 20mm thick in 1:4 mix) i/c grouting with matching pigment all complete different sizes(high quality chequered tile with polymer chemical composition) local manufactured |
| 61 | Supply and making tehsil office court room with 18mm ply to ply ( mr grade) i/c cost of nails, adhesive, carpentery charges all complete job |
| 62 | Wood work in frames using imported kail wood i/c all carriage all complete job |
| 63 | Providing & fixing in position Phenol bonded Bamboowood flooring with planks of sizes 14mm thick, 1800mm length (minimum) and 130 mm wide(minimum), in approved colour, texture and finish, having Performance Appraisal Certificate (PAC) issued by Building Materials & Technology Promotion Council (BMTPC). The flooring shall be fixed with tongue and groove interlocking system, with underlayment of 4mm thick expanded polyethylene foam sheets having density 40kg/cum, over prepared surface with necessary quarter round planks of size 1900mm x 18mm and door reducer of size 1900mm x 44mm, wherever required. The bamboowood planks shall have minimum density of 1000 Kg/cum & minimum Hardness 1000 Kgf. with Eco friendly UV coating, all complete as per direction of the Engineer in-charge. |
| 64 | P/F Wooden Hand Rail Imported Kail Wood |
| 65 | Supply and fixing wooden balustrade 3\\" dia, 39\\" height i/c polishing all complete job (Walnut wood) |
| 66 | P/F Velvet Curtain I/C White Lining Cloth with Almunium tracker Rod I/C Making All Complete In All Respects ( GM/DDECOR) |
| 67 | CARRIAGE OF MATERIAL BY MT FOR AN AVG LEAD OF 15KMsand |
| 68 | Aggregate below 40mm |
| 69 | Aggregate 40mm or above 40mm |
| 70 | BRICKS |
| 71 | Electric partWiring for light point/ fan point/ exhaust fan point/ call bell point with 2X1.5 q.mm FRLS PVC insulated copper conductor (Havell /Polycab/ Fenolex/Anchor eq. standard make as desired by engineer incharge) single core cable In surface / recessed medlum class PVC conduit, with modular switchLegrand Mylinc /SSK NV/schneider Livia /ABB Tvlsha make.), modularplate,suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 72 | Wiring for light/ power plug with 2X4 sq. mm + 1X 4 sq. mm earth wireFRLS PVC Insulated copper conductor ( Havell/Polycab/ Fenolex/Anchor/equivalent as directed by engineer incharge.) single core cable insurface/recessed medium class PVC conduit. |
| 73 | Supplying and fixing suitable size GI box with modular plate and cover infront on surface or in recess, including providing and fixing 6 pin 5/6 &15/16 A modular socket outlet and 15/16 A modular switch, modular plate,suitable GI box, connections etc. as required. Modular Switch & Socket:-Legrand Mylinc /SSK NV/schneider Leiva /ABB Tvisha make make.) |
| 74 | Wiring for lighting circuits/ 6-10 amp power plugwith 2X2.5 sq. mm FRLS PVC insulated copper conductor ( Havell/Polycab/ Fenolex/Anchor/equivalent as directed by engineer incharge.) single core cable insurface/recessed medium class PVC conduit alongwith 1 No. 2.5 sq. mmFRLS PVC insulated copper conductor single core cable for loop earthing asrequired |
| 75 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos. 3 pin 5/6A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc.as required. (For light plugs to be used in non residential buildings).Modular Switch & Socket:- ( Anchor roma plus/Legrand Mylinc /SSKNV/schneider Livia /ABB Tvisha make.) |
| 76 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor ( Havell/Polycab/ Fenolex/Anchor/equivalent as directed by engineer incharge.), single core cable insurface/recessed medium class PVC conduit as required. (f) 2 X 10 sq. mm + 1 X 6 sq. mm earth wire |
| 77 | Supplying and fixing of following sizes of medium class PVC conduit( Anchor/ Ravindra/ Eq. make)along with accessories in surface/recessincluding cutting the wall and making good the same in case of recessedconduit as required, with cement plaster, wall putty, paint, complete25 MM |
| 78 | Supply installation testing and commissioning of 15 W+ LED Surface/recess, square or round Mounted light luminary fitting shape withminimum system lumen efficacy of 100 Im/W with Pressure Die castAluminium Heat Sink and P.F.>0.95,THD<10% ,ССТ 5700К, CRI 80.The LEDwith Useful life of 50000 Hrs at L70.. The Input voltage range shall be 150Vto 270V .The Fixture should have In-built Surge Protection of 2kV. Certification:- LM79 & LM80 test report should be from govt approved Inhouse NABL lab/ government of India. The job includes AMC (reckonedfrom date of successful commissioning) of lighting fixtures for a period ofTwo years which includes replacement of fixtures of Philips/ Trulux /Wipro/ Eq. standard make as directed by the engineer incharge. |
| 79 | Supply installation testing and comm. Of 200-250mm sweep exhaust fan Shutter type of havell /Bajaj /Crompton/ equivalent make as directed byengineer incharge, including making of space in wall/ window as per site requirement and necessary connections. Please Enable Macros to View BoQ information |
