|
| 1 | Taking down cement plaster any description on brick or stone walls or ceiling etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed. |
| 2 | Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 3 | M & L for Brick work with sub class ‘B’ bricks,straight or curved on plan exc 6m mean radius, built in CM 1:4 complete all as specified and directed. |
| 4 | M & L for Brick work with sub class ‘B’ bricks,straight or curved on any radious in half brick thick walls, built in, built in CM 1:4 complete all as specified and directed . |
| 5 | M & L for rendering 10mm thick internal surfaces on brick work or concrete surface in cm 1:6 in and finishing surfaces even and fair without using extra cement complete all as specified and directed. |
| 6 | M & L for rendering 15mm thick in two layers on external surfaces on brick/concrete in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed. |
| 7 | M&L preparing Old plastered surfaces of wall and applying complete wall with 1.0 mm Wall putty and making smooth surfaces and applying two coats of Oil bound distemper over a coat of primer all as specified and directed . |
| 8 | M&L preparing newly plastered surfaces of wall and applying complete wall with 1.0 mm Wall putty and making smooth surfaces and applying two coats of Oil bound distemper over a coat of primer all as specified and directed . |
| 9 | Preparing Old plastered surfaces and applying Two coats of cement base paint on surfaces of walls over one coat of white wash complete all as specified and directed. |
| 10 | Preparing new plastered surfaces and applying Two coats of cement base paint on surfaces of walls over one coat of white wash complete all as specified and directed |
| 11 | Demolition of reinforced cement concrete in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed |
| 12 | M & L for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 13 | M & L for TMT bars 8 mm dia & over cut to length, bent to shape required, including crancking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed |
| 14 | Form work to sofit of suspended slabs such as roof slabs,landings & similar work not exc 200mm thick(Horizontal of sloping) rough finished surfaces of concrete flat complete all as specified & directed. |
| 15 | M&L for granite (any type) work (table rubbed and polished) 18 to 20 mm thick in working platform and like including cutting for sink etc. in cement mortar (1:4) including rounding of edges and pointing in white cement (1:2) using marble dust with admixture of pigment to match complete all as specified and directed. |
| 16 | S & F in repairs sinks made of stainless steel 1.00mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed |
| 17 | S&F in repair rotational three layer moulded polyethylene water storage tanks (cylinderical vertical with closed top) capacity 1000 Ltr hoisted and fixed in position complete all as specified and directed |
| 18 | S & F as in repair of CPVC ball valve/gate valve fittings such as tee, elbow and socket etc of 25 mm outer dia. |
| 19 | Dismantling floor, hearth or wall tilling including cement mortar bedding , removing serviceable tiles to store and rubbish off the premises complete all as specified and directed . |
| 20 | Demolition of Concrete in ground floors and pavings including floor tiles n exc 15 cm thickness (below or above ground level) complete all as specified and directed |
| 21 | M&L for 25 mm thick PCC 1:2:4 (12.5mm graded agreegate ) type B0 in levelling course of floor complete all as specified and directed |
| 22 | M & L for virified ceramic tiles 7-8 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and incl 15mm thick screed bed or bedding layer with CM 1:4 complete all as specified and directed by engr in charge.Notes : Shade of the tile including colour, design and pattern shall be approved by GE. |
| 23 | M & L for virified ceramic tiles 7-8 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and incl 15mm thick backing coat or bedding with CM 1:4 complete all as specified and directed by engr in charge.Notes : Shade of the tile including colour, design and pattern shall be approved by GE. |
| 24 | M&L for glazed ceramic coloured tiles in verticle surface 450mmx350mmx7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over backing coat 10mm thick cement mortar in 1:4 complete all as specified and directed Notes : Shade of the tile including colour, design and pattern shall be approved by GE. |
| 25 | M & L for making in holes in masonry wall using chemical emulsion at hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing wall complete all as specified and directed |
| 26 | Extra for forming fair finished drain or channels 30 cm inner girth in Cement concrete using extra cement including forms, moulds mitred/ stopped ends etc. in manholes. ( inner girth only measured) complete all as specified and directed. |
| 27 | Taking down chowkhats or frames not exc 1.5 Sqm ( without taking shutters from the frame). |
| 28 | Taking down chowkhats or frames exc 1.5 Sqm ( without taking shutters from the frame). |
| 29 | S&F pressed steel frames 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified. |
| 30 | M&L Plain Cement Concrete 1:3:6 type C1 filling of pressed steel frame and hold fast block etc. |
| 31 | S & F 35 mm thick second class hard wood, kiln seasoned and chemically pressure treated plain framed, panelled shutter (Two panel) with lock rail and panel of 9 mm BWP Commercial ply or 12 mm veneered particle board with commercial face veneers on both faces or 10 mm bison panel. |
| 32 | S&F in repair Aluminium body ISI marked Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed |
| 33 | Supply and fixing 2nd class hard wood 35 mm thick glazed and skelton shutters open rebated and prepared to receive gauge. (Without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part-I section 8 clause 8.20 (a) supplied and fitted to chowkats complete all as specified and directed |
| 34 | M&L two coat of synthetic enamel paint over new wooden surfaces of any description not otherwise described over 10cm in width or grith over one coat of pink primer including preparation of surfaces complete all as specified and directed |
| 35 | M&L two coat of synthetic enamel paint over old wooden surfaces of any description not otherwise described over 10cm in width or grith over one coat of pink primer including preparation of surfaces complete all as specified and directed |
| 36 | Supply & fixing MS pressed handle oval type stove enamelled black of 125mm long fixed with screw to shutter complete all as specified and directed |
| 37 | Supply & fixing MS barrel tower bolt of 100mm long stove enamelled black with bright bolt complete all as specified and directed |
| 38 | Supply & fixing 300 mm long mild steel sliding door bolts plate type stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts four on bolts plate and two on couple plate and fixed complete all as specified and directed |
| 39 | S&F floor door stopper 140 mm of aluminium alloy body and tongue anodised with hard drawn steel spring complete all as directed |
| 40 | Supply & fixing in repairs 300 mm,Mild steel ordinary rat rail rod pattern springs including roller and roller plate complete. |
| 41 | S&F in Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.18mm and fixed with beeding/Staples directed |
| 42 | S & F Powder coated aluminium three track frame/shutters for windows,door, ventilators sliding/openable etc icluding joining cleat for fixing, locking arrangement, rubber beading, screws, etc complete all as specified. Note : (i) Glazing and wire mesh shall be measured and paid separetely only as the labour element included in the relavent item.(ii) Item shall be paid as per weight of aluminium section (iii) The rate quoted shall be inclusive of the cost of neoprene beading, glazing pin, screws and powder coated fittings such as locking arraangement etc as required, which shall not be measured for arriving the weight (iv) The rate shall also be inclusive of complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing. |
| 43 | M & L for framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, framed guard bars; barred iron doors and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed |
| 44 | S&F 5mm thick tinted glass in aluminium doors & windows with rubber packing including hacking out old broken glass ( any thickness, size from aluminium beading ) complete all as specified and directed |
| 45 | S&F 3mm thick Figured glass, pin head type and glazing with oil putty in squares exc 0.5 sq. m in each pane complete all as specified and directed |
| 46 | M&L for Hard core of gauge n exc 63mm thick of broken bricks spread leveling watering ramming to true surface complete all as specified and directed |
| 47 | M&L for Cement concrete 1:3:6 type C-1 (using 20 mm graded stone aggregate) 75 mm thick as in plinth protections, surface finished even and smooth w/o using extra cement including 3 mm thick glass dividing strip of figured glass, Pin headed type, 38 mm wide inserted in position complete all as specified and directed |
| 48 | Dismantling of asbestos cement corrugated sheets as in roof coverings complete all as specified and directed |
| 49 | S & F of Pre-painted galvalume aluminum zinc coating AZ-150 GI based tile profile galvalum sheet 0.50mm thick of red colour as in roof covering/cladding to wall inlcuding cutting, moulding in shape fixed with self tapping screws complete all as specified and directed |
| 50 | Prepainted galvanume aluminium zine coating GI based plain steel sheeting 0.50 mm thick any colour having tensile strenght 550Mpa in roof coverings fixed with self tapping screws complete all as specified and directed |
| 51 | Dismantling timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed |
| 52 | S & F of Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc nd similar work conforming to Fe.290. Gde-E-165 complete all as specified and directed |
| 53 | M & L two coats of synthetic enamel painting on steel surfaces exc 10 cm width or girth over one coat of red oxide primer including preparation of new steel surfaces complete all as specified and directed . |
| 54 | Dismantling of wall and ceiling boards, any thickness including cover fillets complete all as specified and directed. |
| 55 | S & F of Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed. |
| 56 | S&F 4 mm thick HPSC (High Pressure steam cured) pre-primed textured designer board, water resistant, be placed in the grid system complete all as specified and directed. |
| 57 | S&F in repair 20mm dia curtain rods fancy type, mild steel chromium plated with fixing brackets, stops, rollers complete all as specified and as directed . |
| 58 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet & edges will be painted to match with prelam sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing |
| 59 | S&F Solid PVC factory made Door shutter of 30mm (style) consisting of frame made out of MS tubes for top bottom rails MS frame shall be covered with heat moulded plain coloured PVC 'C' channel having a PVC sheet strip 20mm width stuck inside with solvent cement for stilesa and plain coloured PVC sheets for top rail, lock & bottom rail on either sides & as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beeding and jointed together with solvent cement as pere specification and drawing |
| 60 | S&F 100 mm size Stainless steel butt hinges type B-12 all as specified and directed |
| 61 | S&F 150 mm long aluminium anodised barrel tower bolt and 12 mm dia fixed |
| 62 | S&F 125mm long aluminium anodised handle cast type anodised all as specified. |
| 63 | M&L for 18/19mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame work including all fittings like motic lock,piono hinges,handle complete all fas specified and directed |
| 64 | Supply, Fixing and installation of wall mounted Electric Kitchen Chimney of size 75 cm, compact design suction 1400m3/hr Auto clean type touch control with wave sensor duct dia 150mm including free Kit for installation with duct cover of adequate size ,kutchina and equivalent make as approved by GE. |
| 65 | S & F in multitech railing set (heavy duty) for kitchen ,as per approved manufacturer,s specification premium quality including all fittings complete all as specified and as directed. |
| 66 | S & F modular thali-plate basket made ss stainless steel (SS-304), miniumum size of 520x485x100mm,as per approved manufacturer,s specification premium quality including all fittings complete all as specified and as directed. |
| 67 | S & F modular perforated cutlery basket made of stainless steel (SS-304) miniumum size size of 520x485x100mm,as per approved manufacturer,s specification premium quality including all fittings complete all as specified and as directed. Make Godrej /hitech/kutchina Kitchen appliances or other equivalent make as approved by GE.. |
| 68 | S & F dish rack made SS stainless steel (SS-304), miniumum size of 570x280mm as per approved manufacturer,s specification premium quality including all fittings complete all as specified and as directed. Make Godrej /hitech/kutchina Kitchen appliances or other equivalent make as approved by GE.. |
| 69 | M&L for 50 mm thick cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base of flooring/ hard standing & finished the surface even & fair complete all as specified and directed . |
| 70 | M & L for 15mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes finished even and rough complete all as specified and directed by engr in charge. |
| 71 | M&L for Chequered cement concrete tiles 30cm x 30cm x 25mm thick with grey cement and pigment set and jointed in neat cement slurry and pointed in white or coloured cement complete all as specified and directed . |
| 72 | M & L for providing cement concrete cas in situ 1:2:4, type B1 (using 20mm graded stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edge including use of formwork complete all as specified and directed . |
| 73 | S & F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, with rubber ring joints and solvent fixed to walls including mild steel 25 x 3 mm brackets complete. |
| 74 | S & F 110mm dia bore PVC (SWR) bends and fixed with pipe with solvent complete all as specified and as directed. |
| 75 | S & F in Repair of Vitreous China wash down water closet pan (pedestal pattern), white including fixing bolts, but excuding flushing cistern and flush pipe complete all as specified and as directed. . |
| 76 | S & F Vitreuos china wash hand basin size 560x450mm oval shape incl stand fixed to all cutting for and pinning in end of brackets or erecting stand, and inclusive of fixing and supply and waste pipe and CP waste coupling 32 mm dia complete all as specified and as directed. |
| 77 | Supply & fix in repair brass chromium plated pillar tap swan neck long body fancy type for wash hand basin for mixing hot and cold water screwed down for iron pipes suitable for 15mm bore pipe complete all as specified and as directed. |
| 78 | S & F of 600 x 450mm bevelled edge mirror of 1st quality glass, mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete. |
| 79 | S & F of 10 litre PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed. |
| 80 | S&F brass chromium plated health faucet 15 mm with flexible tube (1.5 m long) of stainless steel provided rubber hose and wall hook etc complete as in repair all as specified. |
| 81 | S&F in repair 15 mm dia two way bib taps, brass fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions. |
| 82 | S&F in repair 15 mm dia bore bib taps, brass chromium plated fancy type with crutch alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed. |
| 83 | S&F in repair 15 mm dia stop/angle valves, cast copper alloy, CP fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe. |
| 84 | S & F in repairs CPVC pipes 25 mm outer dia SDR 11 & Plain CPVC SDR 11 includig all fittings on walls/ceiling or laying in floors including necessary cutting/chasing of walls and floors complete. |
| 85 | S & F in repairs CPVC pipes 20 mm outer dia SDR 11 & Plain CPVC SDR 11 includig all fittings on walls/ceiling or laying in floors including necessary cutting/chasing of walls and floors complete all as specified and as directed. |
| 86 | S & F of Male Brass Threaded Adaptor (MTA/ MBTA) or Feale Brass Threaded Adaptor (FTA/ FBTA) complete. |
| 87 | S & F of PVC connections 15mm size with PTMT nuts of length 600mm |
| 88 | S & F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors and connecting with manholes or disposal place. |
| 89 | S & F 110mm dia bore PVC (SWR) bends with access door all as specified and as directed. |
| 90 | S & F 110mm bore PVC (SWR) vent cowl with rubber ring joints, fixed to pipes all as specified. |
| 91 | S & F of PVC (SWR) junction single, (Single T) 110 mm bore equal or unequal with acess door complete. |
| 92 | Taking down copper /aluminium point wiring (light, fan, bell,socket or power) complete including fixture and fittings such as switches, ceiling roses, pendent, regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit a for above items should be made as per condition seperately) and making good distrubed surfaces of walls, floors etc complete all as specified and directed at site. |
| 93 | Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface complete all as specified and directed. |
| 94 | Taking down carefully copper/ aluminium sub main wiring of any size from surface/ concealed /existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed. |
| 95 | Taking down existing geyser of any capacity after disconnecting all necessary electrical and water supply connections and deposit to MES store yard of AGE E/M Gaya complete all as specified and directed. |
| 96 | Taking down ceiling fan/ exhaust fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan blades and deposit to MES store yard of AGE E/M Gaya complete all as specified and as directed. |
| 97 | M & L for point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sqmm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed for the following :- |
| 98 | (a) One light point controlled by one, one way switch 5 Amps |
| 99 | (b) One ceiling / exhaust fan point controlled by one, one way switch 5 Amps |
| 100 | (c) One 5 Amps socket outlet point controlled by one switch on the same board. |
| 101 | (d) One 5 Amps socket outlet point controlled by one switch on independent board. |
| 102 | (e) One bell point controlled by one, bell switch 5 Amps |
| 103 | Description all as per item No 97 here-in-before but using 2.5 sq mm single core copper conductor FRLSH cable of multistranded PVC insulated unsheathed 1100 volts grade for 5/15 Amps switch socket combination point including necessary running of 2.5 sq mm copper conductor FRLSH cable of multistranded PVC insulated unsheathed as earth continuity conductor along with wiring and connecting to the common eath dolly. |
| 104 | Description all as per item No 97 here-in-before but using 4.0 sqmm single core copper conductor FRLSH cable of multistranded PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 4.0 sq mm copper conductor FRLSH cable of multistranded PVC insulated unsheathed as earth continuity conductor along with wiring and connecting to the common eath dolly. |
| 105 | S&F ceiling rose, surface bakelite with 3 terminals, ISI marked for batten fitting complete. |
| 106 | S&F modular switch piano flush type, single pole, one way and 5/6 Amp single module complete. |
| 107 | S&F for modular switch piano flush type, single pole, one way, and 15/16 Amp single module complete. |
| 108 | S&F modular socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module piano flush type complete. |
| 109 | S&F modular socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module piano flush type complete. |
| 110 | S&F modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed. |
| 111 | S&F bell push modular 6 Amps single module complete all as specified and as directed. |
| 112 | S&F lamp holder, PVC/Polycarbonate type with back plate suitable for batten/ slanting fittings complete all as specified and as directed. |
| 113 | S&F bell electric ding dong type suitable for operation on 230 volt 50 Hz AC supply complete all as specified and as directed. |
| 114 | M&L for submain wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable, one run of 6 sqmm cable and one run of PVC conduit will be measured as one unit |
| 115 | S & F sheet metal enclosure MCB DB TPN 12 way vertical type with 200 Amps rated bus bar 415 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and directed. |
| 116 | S & F sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and directed. |
| 117 | S & F MCCB 4 pole, 125 Amps with breaking capacity 16 KA, 415 volts complete all as specified and directed. |
| 118 | S&F MCB tripple pole and neutral rated capacity 63 Amps, 415 Volts breaking capacity 10 KA, 'C' curve complete all as specified and directed. |
| 119 | S&F MCB single pole and neutral rated capacity 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and directed. |
| 120 | S&F MCB Single pole rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and directed. |
| 121 | S&F for metal clad box suitable for 230 volt 50 Hz AC supply three pin with MCB SP 20/32 Amps including removal of old unserviceable one complete all as specified and as directed complete all as specified and directed |
| 122 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. |
| 123 | S&F LED tube light fitting 2 feet x 10 watts mirror type with high out put diffuser, decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose to fitting complete all as specified and directed. |
| 124 | S&F energy saving new generation 10 watts LED bulk head fitting IP 65 luminaire with opal diffuser pre wired with warranty option of 5 years from date of installation and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED bulb complete all as specified and as directed. |
| 125 | S&F wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc with warranty option of 5 years from date of installation complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. |
| 126 | S&F energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25 watts with pre wired and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed. |
| 127 | Labour only for refixing of water heater storage type (Geyser) vertical/ Horizontal type obtained from item No. 4 above including 04 Nos of hold fashner nuts required suitable size fixed in brick wall, PVC connection pipe hot & cold complete all as specified and as directed. |
| 128 | Labour only for refixing the celing fan/ exhaust fan obtained from item No. 5 above with replacement of unsv 3 core PVC insulated PVC sheated 3 core multistranded copper conductor cable of size 23/0.193 from ceiling rose to fan terminal including over hauling the fan, painting of ceiling fans complete with two coats synthetic enamel paint by spraying including filling cavities with filler after cleaning all dust etc. complete all as specified and directed. |
| 129 | M & L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia, PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate no 3 of SSR part I including excavation and earthwork in any type of soil/strata and testing on completion. Note:- GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted. Supply and laying river bed fine sand in trenches/ ducts 15 cm under cable and 8 cm above the cable for cushioning / protection to cable including spreading, levelling and get thick 18cm after hand punning complete all as specified and directed at site. Please Enable Macros to View BoQ information |
