|
| 1 | Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft/ loose soil complete all as specified and as directed. |
| 2 | Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth; for foundation etc or for shafts, wells, cesspits, manhole, pier holes, etc n.exc 10 Sqm on plan and n.exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed. |
| 3 | Excavation over areas n.exc 1.5m deep & getting out soft/loose soil etc complete all as specified and as directed. |
| 4 | Excavation over areas exc 1.5m deep & n.exc 3 m deep and getting out in soft/loose soil complete all as specified and as directed. |
| 5 | Returning filling in trenches including spreading leveling watering and well ramming in layers not exceeding 25 cm thick all complete all as specified ans as directed. |
| 6 | Removing of excavated material not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point all complete all as specified and as directed. |
| 7 | M&L for hardcore of gauge n.exc 63mm, deposited, spread and levelled in layers n.exc 15cm thick, watered and rammmed to a true surface complete all as specified and as directed. |
| 8 | M & L for PCC (1:3:6) type C-2, 100 mm thick (using 40 mm graded stone aggregate) as in sub base of floor complete all as specified and as directed. |
| 9 | M & L for PCC (1:2:4) type B-1, 40 mm thick (using 20 mm graded stone aggregate) as in floor finish complete all as specified and as directed. |
| 10 | M&L for forming contraction (dummy) joints 65mm deepx10mm wide, filled with sealing compound complete all as specified and directed. |
| 11 | M&L for brick work with sub class `B' bricks(using old size burnt bricks) straight or curved on plan exc 6m mean radius built in CM (1:4) complete all as specified and as directed. |
| 12 | M&L for brick work with sub class `B' bricks(using old size burnt bricks) straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and as directed. |
| 13 | Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and raming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface in soft/ loose soil complete all as specified and as directed. |
| 14 | M&L for PCC (1:3:6) type C-2 (using 40mm grade stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed. |
| 15 | S&F steel work in tubular trusses, post, purlins,rafter including special shaped washer etc. Complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade st-240 complete all as specified and as directed. |
| 16 | S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe 410 -W (Gde-E- 250) quality- A complete all as specified and as directed. |
| 17 | M&L for preparation of old surfaces of steel and iron work of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint in any tint complete all as specified. |
| 18 | M&L for preparation of new surfaces of steel and iron work of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of redoxide primer on new surfaces in any tint complete all as specified. |
| 19 | S & F 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and directed. |
| 20 | M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 21 | M&L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade laid, jointed with grey cement and pigment laid over and including 50 mm thick sand cushioning and pointed in coloured cement mortar (1:3) etc complete all as specified and as directed. |
| 22 | M&L for chequered cement concrete tiles of size not less than 300x300x25mm thick laid over and including 15mm thick screed bed for laying floor finishes in cement mortar (1:6) etc, set, jointed and pointed in neat cement slurry with grey cement and pigments complete all as specified and directed. |
| 23 | M&L for PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed. |
| 24 | M&L for RCC design Mix M-25 as in foundation, including rafts, footings, foundation beams; plinth beams; bases for coloumns, etc basement slabs under reamed piles and mass concrete complete all as specified and as directed. |
| 25 | M&L for RCC design Mix M-25 as in columns, pillars, piers, posts and struts complete all as specified and as directed. |
| 26 | M&L for RCC design Mix M-25 as in beams, cantilvers, bressummers, lintels over 1.5m span complete all as specified and as directed. |
| 27 | M&L for RCC design Mix M-25 as in Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and as directed. |
| 28 | M&L for RCC design Mix M-25 as in chajjas complete all as specified and as directed. |
| 29 | M&L for Brickwork with sub class‘B’ bricks(using old size burnt bricks) in one brick thick honey comb walling, built in CM (1:4) complete all as specified and as directed |
| 30 | M&L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc complete, drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe 410W Gde E-1250 quality A including dismantling of old steel work such as doors, gates complete all as specified and as directed |
| 31 | S&F mild steel, plain black sheet 1mm thick in wall cladding, steel gates and similar work, cut to size holes punched, including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams including bending or turning up, mitred angles, etc. as required complete all as specified and as directed |
| 32 | S&F steel windows with side hung shutters including Box type hinges with steel handle and steel peg stay, complete with glazing bars, devetailed or welded complete all as specified and as directed |
| 33 | S&F Sheet glass 3mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5sqm in each pane complete all as specified and as directed |
| 34 | M&L for providing Machine cut ,mirror polished kota stone slab flooring 20-25mm thick over and including 20mm thick screed bed in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone floor/steps treads including rubbing/grinding and polishing complete all as specified and as directed. |
| 35 | M&L for mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 36 | All as per item No. 35.00 (here-in-before) but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders. |
| 37 | M&L PCC (1:4:8) type D-2(using 40mm fraded stone aggregate), 75mm thick as in sub base of floor complete all as specified and as directed. |
| 38 | M&L for 75 mm thick PCC (1:3:6) type C-2 , (using 40 mm graded stone aggregate) in plinth protection/aprons/path laid to slope of 1:12, finished fair and even without using extra cement with and including all necessary formwork to divide tha area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 10 mm wide joints throughout thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) complete all as specified and as directed. |
| 39 | S&F bands, straps or stays , plain angle cleat or flat iron cleat or securing purlins to wood trusses or rafters, knee piece and similar small articles etc conforming to Fe-290 Gde E-165 complete all as specified and as directed. |
| 40 | M&L for rendering 10mm thick plaster in cement mortar (1:6) on fair faces of brick or concrete work finished the surface even and smooth without using extra cement complete all as specified and as directed. |
| 41 | M&L for rendering 15mm thick in cement mortar (1:4) on brick or concrete work finished the surface even and smooth without using extra cement complete all as specified and as directed. |
| 42 | M&L for rendering 15mm thick in cement mortar (1:6) on brick or concrete work finished the surface even and smooth without using extra cement complete all as specified and as directed. |
| 43 | M&L for preparation of new plastered surfaces of walls and applying two coats of distemper oil emulsion over and including a coat of primer over 1.5 mm thick wall care putty(in two layers) complete all as specified and as directed. |
| 44 | M&L for preparation of new plastered surfaces of walls and applying two coats of distemper oil emulsion over and including a coat of primer o complete all as specified and as directed. |
| 45 | M&L for preparation of new plastered surfaces and applying two coats of cement base paint over and including a coat of primer of approved shade on walls complete all as specified and as directed. |
| 46 | Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed. |
| 47 | Use and waste of formwork to sides of pillars posts, struts, piers, columns and stanchions finished the suface rough complete all as specified and directed. |
| 48 | Use and waste of formwork to chajjas, troughs and similar items including edges complete all as specified and directed. |
| 49 | Use and waste of formwork to sides and soffits of floors or roof beams, beams haunchings, girders,bressummers lintels, cantilevers, shelves including supports overhangs etc also splays between floors and beams complete all as specified and directed. |
| 50 | Formwork with fair finished to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work n.exc 200mm thick (horizontal or sloping) complete all as specified and as directed. |
| 51 | Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete rail ings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide, rough finished surface complete all as specified and as directed. |
| 52 | M&L for Non Skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors laid over and including 15mm thick screed bed for laying floor finishes in CM (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and as directed. |
| 53 | M&L for Glazed ceramic white tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile laid over and including backing coat of 10 mm thick in CM (1:4) complete all as specified and as directed. |
| 54 | S&F framed work such as grills, grating, etc, with ends of bars shouldered and/or riveted or forged into spikes ; framed gurad bars ; barred iron doors, ladders, framed balusters, walk ways, railings frame work of water tanks and similar work conforming to Fe-290-0 Gde-E-165 complete all as specified and as directed. |
| 55 | S&F 100 mm medium weight butt hinges cold rolled mild steel complete all as specified and as directed. |
| 56 | S&F MS handle 150mm long oval type complete all as specified and as directed. |
| 57 | S&F 75 mm medium weight butt hinges cold rolled mild steel complete all as specified and as directed. |
| 58 | S&F 150 mm long aluminium anodised tower bolts complete all as specified and directed. |
| 59 | S&F 200 mm long aluminium anodised tower bolts complete all as specified and as directed. |
| 60 | S & F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 61 | M & L for Preparing the new surfaces of walls , and applying two coats of exterior weather paint over and including a coat of primer on new wall surfaces complete all as specified and as directed |
| 62 | S&F rotational moulded polyethylene 1000 Ltrs Capacity water storage tanks double layer (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I with and including ball brass valve, with polythelene float and fly nut complete screwed down for iron pipe of 20 mm dia complete all as specified and as directed. |
| 63 | S&F GI tubes medium grade, galvanised wih all fittings and fixed complete to walls and ceiling or laid on floors etc, 15 mm bore complete all as specified and as directed. |
| 64 | S&F GI tubes medium grade, galvanised wih all fittings and fixed complete to walls and ceiling or laid on floors etc, 20 mm bore complete all as specified and as directed. |
| 65 | S&F Health faucet of CP 15mm bore fancy type with suitable flexible pipe as per site requirement including CP nipple with socket complete all as directed by Engr-in-Charge. Make Essco Cat No-ALE-ESS-585 or equivalent in Hindware/Cera/Prayag or equivalent as approved by GE. |
| 66 | M&L for cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting not exc 10 cm girth complete all as specified and as directed. |
| 67 | S&F oval type vitreous china wash hand basin mounted in slab flat white size 550 x 400 mm including cutting for and pinning in ends, Including Waste fittings, brass chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed complete all as specified and as directed. |
| 68 | S&F in repairs one piece EWC with vibe sense duroplast slim seat cover and twin flush fittings 660x 350 x 745 mm (snow white) S trap 300mm and fittings complete all as directed (Make Cera and cat No S1013230 and equvalent) |
| 69 | S&F in repairs CP Central hole basin mixer fancy type 15mm dia all as specified and directed. |
| 70 | S& 15mm dia of pipe bib taps cast copper alloy, fancy type, chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed. |
| 71 | S&F for 15mm dia of pipe angle stop valves,fancy type and chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for Unions and fixed complete all as specified and as directed. |
| 72 | S&F PVC connection 15mm dia and 45cm long with two Nos of brass checknuts and washers complete all as specified and as directed. |
| 73 | S & F Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated brackets guard and railing 60 cm long complete all as specified and directed. |
| 74 | S&F 600mm long tubular towel rail brass chromium plated 20mm dia, D type 60cm long fixed with two plugs (Gutties) of 2nd class hard wood embeded in cement mortor 1:3 with MS screws complete all as specified and as directed. |
| 75 | M&L for Granite (of any type) tiles 18-20mm thick as in platform machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing with nosing laid over and including 20 mm thick screed bed in CM (1:4) complete all as directed by Engr-in-Charge. |
| 76 | S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, suppling and fixing in opening as per specification complete all as specified and as directed. |
| 77 | S&F factory made solid panel PVC door shutter 30mm thick (style).consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with eat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement suppling & fixing in the frame at site as per specification complete all as specified and as directed. |
| 78 | M&L for precast RCC (1:2:4) type B-1 (Using 20 mm graded stone aggregate) as in in manhole/soak well/septic tanks slabs/covers etc including necessary form work complete set in cement mortar (1:4) complete all as specified and as directed. |
| 79 | Cutting into existing manhole/soakwell/septic tank for new connections/drain, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4section) in cement concrete (1:2:4) type B-1, smooth finished and reforming benching as required for internal dia size 150mm complete all as specified and as directed. |
| 80 | M&L for PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in band coping bed plate, benching etc including slightly rounded of chamfered angle, throating, etc complete all as specified and as directed. |
| 81 | M&L for loose filling with broken bricks aggregate of gauge 80 to 150mm in soakage pits, soakage wells complete all as specified and as directed. |
| 82 | M&L for loose filling with broken bricks aggregate of gauge 40 to 80mm in soakage pits, soakage wells complete all as specified and as directed. |
| 83 | M&L for DWCPE (SN8) 150 mm (ID) diameter Pipes laid in trenches complete all as specified and directed. |
| 84 | Demolition of brick work or stone/boulder masonry, built in cement mortar including all quions, arches, pillers etc complete all as specified and as directed. |
| 85 | Surface dressing n exc 15cm deep in soft/loose soil complete all as specified and as directed. |
| 86 | Demolition of cement concrete (unreinforced) in ground floors and paving n.exc. 15cm thick (below or above ground level) and removal of rubbish from the site complete all as specified and as directed. |
| 87 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 88 | Dismantling Plain corrugated Asbestos cement, any gauge, thickness, including, Nanital or similar pattern roof covering complete all as specified and as directed. |
| 89 | M&L for brick work with sub class `B' bricks (using old size burnt bricks) straight or curved on plan to any radius in half brick thick walls built in CM (1:4) complete all as specified and as directed |
| 90 | M&L for GI wire netting 0.71 mm dia and 12 mm mesh lathing in to reed and bird proofing in walls incl all laps cutting and waste complete all as specified and as directed. |
| 91 | M&L for 15mm thick plastering in CM (1:4) on one side of lathing in two separate layers even and smooth without using extra cement complete all as specified and as directed. |
| 92 | M&L for 10 mm thick plastering in CM (1:6) on the other side of lathing finished even and smooth without using extra cement complete all as specified and as directed. |
| 93 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6) and surfaces finished even and fair complete all as specified and as directed. |
| 94 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4) using water proofing compound @ 3% by wt of cement for surfaces finished even and smooth (without using extra cement) complete all as specified and as directed. (WPC will be measured and paid separately) |
| 95 | Supply only Integral water proofing compound complete all as specified and as directed. |
| 96 | M&L for 2nd class hard wood scantling as in framed work etc clean sawn complete all as specified and as directed. |
| 97 | M&L 40 mm thick PCC (1:2:4) type B-0 (using 12.5 mm graded stone agg) as damp proof course to horizontal or vertical surfaces including necessary form works, applying evenly a coat of blown type bitumen at 1.50 kg per sqm and blinding with clean dry sand @ 0.05 cum per sqm including 150 micron thick polythene film laid on a coat of bitumen primer @ 0.30 to 0.50 kg per sqm complete all as specified and as directed. |
| 98 | M & L for PCC 25 mm thick type B-0, (1:2:4) (using 12.5 mm graded stone aggregate) as in levelling course of floor complete all as specified and as directed. |
| 99 | M&L for Non Skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.36 Sqm but not exceeding 0.42 Sqm, in floors laid over and including 15mm thick screed bed in cement mortar 1:6 for laying floor finishes, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and as directed. |
| 100 | All as per Item No. 99.00 (here-in-before) but on vertical surfaces such as skirting , dado risers to steps over and including 10 mm thick backing coat in CM (1:4). |
| 101 | S & F Rolled Mild Steel purlins conforming to Fe 410 -W (Gde-E- 250) quality-A including distance pieces, cleats, complete all as specified and as directed. |
| 102 | S&F compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates,etc conforming to Fe-410 W (GdeE-250) quality-A, complete all as specified and as directed. |
| 103 | S & F for 4 mm thick of size 600x600mm HSPC (high pressure Steam Cured) non asbestos fibre cement reinforced multipurpose board, pre-primetered self embossed, textured designer board E-Board Classic fixed or laid/inserted to timber/ GI frame work with screws to be fixed in ceiling flat or sloping and Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre both ways, size of grid 605 x 605mm fixed with steel dash fasteners or from purlin from the roof with alignment clip including providing provisions for light fixtures of any size including dismantling of old unsv ceiling boards (fibre, pulp, insulation, etc.) any thickness including cover fillets of any description and at any location complete all as specified and as directed. |
| 104 | S & F for 4 mm thick of size 600x600mm HSPC (high pressure Steam Cured) non asbestos fibre cement reinforced multipurpose board, pre-primetered self embossed, textured designer board E-Board Classic fixed or laid/inserted to timber/ GI frame work with screws to be fixed in ceiling flat or sloping and Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre both ways, size of grid 605 x 605mm fixed with steel dash fasteners or from purlin from the roof with alignment clip including providing provisions for light fixtures of any size complete all as specified and as directed. |
| 105 | S&F Non asbestos fibre cement building boards 4mm thick fixed with screws in ceiling over and including Anodised aluminium snap grid frame work for false ceiling all as specified complete fixing arrangment complete all as directed by Engineer-in-Charge. |
| 106 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification complete all as specified and as directed. |
| 107 | M&L for Solid PVC Wall Lining consisting of 5mm thick Plain or coloured with wood grains printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and as directed. |
| 108 | M&L for second class hardwood plain fillets exc 13sqcm and not exc. 25sqcm, square or rectangular in section, wrought, secured with nails or brads complete all as specified and as directed. |
| 109 | S & F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and as directed. |
| 110 | S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 111 | S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and as directed. Please Enable Macros to View BoQ information |
