|
| 1 | Dismantling of plain or corrugated steel sheeting any gauge, thicknes, including Naintal or similar pattern roof coverings of any description etc complete all as specified and directed. |
| 2 | Dismantling wall and ceiling board fibre, pulp insulation etc or insulation boards any thickness including cover fillets complete all as specified and directed. |
| 3 | Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing) removing serviceable tiles to store and rubbish off the premises and removing the debris outside from defence land complete all as specified and directed. |
| 4 | Dismantling unframed timber scantling 40 sqm and over in section,in any position complete all as specified and directed. |
| 5 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 6 | Taking down chowkhats or frames exc 1.50 and n.exc 4 Sqm each (without talking off shutters from the frame) complete all as specified and directed. |
| 7 | Taking down Chowkhat or frames not exceeding 1.5 Sqm each with shutters (Without taking off shutters from the frames( complete all as specified and directed. |
| 8 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 9 | S&F 0.63mm thick CGI based Galvanised corrugated mild steel sheeting with two corrugations side lap, fixied with coach screws and washer, in roofs, walls etc, with grade of zinc coating 275 complete all as specified and directed. |
| 10 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, velly Gutter fixed with self tapping screws complete all as specified and directed. |
| 11 | S&F 1.25mm thick Mild steel sheet , 150mm dia, galvanised class 3, half round with rounded edges omplete all as specified and directed |
| 12 | S & F for 4 mm thick of size 600x600mm HSPC (high pressure Steam Cured) pre-primetered self embossed, textured designer board E-Board Classic to be fixed GI grid/section size 600mmx600mm with main runner 38x24x0.9mm thick ,cross tee 28.6x24x0.9 mm and wall angle 19x19x0.9 mm duly suspended with 2mm dia SS bar hangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purlin from the roof with alignment clip including providing provisions for light fixtures of any size complete all as specified and directed. |
| 13 | S&F for 5mm thick PVC sheet fillets of width 35mm for wall panelling including of fixing on to wall making PVC frame as per specification and drawing complete all as specified and directed. |
| 14 | M&L for solid PVC wall lining consisting of 5mm thick plain or coloured with wood grains printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and directed. |
| 15 | M&L for 25mm thick PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate in sub base of floor to receive the surface of tiles complete all as specified and directed |
| 16 | S&F light shade vitrified ceramic tiles 8 to 10mm thick area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, each in floors laid over and including 15mm thick screed bed or bedding layer of mortar in CM (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed. |
| 17 | All as per item No.16 above but on vertical surfaces such as skirting , dado risers to steps fixed over and including 10 mm thick bedding layer in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed. |
| 18 | S&F Non skid ceramic colour floor tiles of 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm in floors etc with 15mm thick screed bed or bedding layer of mortar for laying floor finishes in CM (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed. |
| 19 | S&F Non skid ceramic colour floor tiles of 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but n.exc 0.38 sqm in floors etc with 15mm thick screed bed or bedding layer of mortar for laying floor finishes in CM (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed. |
| 20 | M&L for coloured Glazed ceramic tiles in vertical surface such as dado etc 450mmX 300mmX 7 to 8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of the tiles over and including 10mm thick rough cement plaster to receive tiles in CM 1:4 complete all as specified and as directed. |
| 21 | M&L for 20mm thick granite work (table rubbed and polished) in steps, jambs pillars, window cills ,cooking platform and like including pointing in white cement (1:2) using marble dust with admixture of pigments to match with shade or granite over including 15mm thick screed bed or bedding layer in cement mortar 1:6 etc complete all as specified and directed. |
| 22 | M&L for 100mm thick PCC 1:3:6, type C-2 (using 40 mm graded stone aggregates) as in sub base completel all as specified and directed. |
| 23 | M&L for chequered cement concrete tiles 30 cm X 30 cm X 25 mm thick, set jointed and pointed in neat cement slurry and with grey cement and pigments in floors laid over & including 15 mm thick screed bed or bedding layer of mortar in CM 1:6 for laying floor finishes/ tiles complete all as specified and directed. |
| 24 | S&F Steel work in tubular trusses, post, purlin including special shaped washer etc. using ERW or induction butt welded tubes conforming to IS 1161-1979 grade st 240 complete all as specified and directed. |
| 25 | M&L for rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, pipe, channel or flat sections) including distance pieces, cleats etc conforming to Fe 410-W (Gde-E 250) quality-A complete all as specified and directed. |
| 26 | S & F solid PVC door frame of size 50 x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube suppling fixing in opening as per specification & drawing complete all as specified & directed. |
| 27 | S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame, made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC , ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for to rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed to getter with solvent cement, supplying & fixing in the frame at site as per specification & drawing for Item No. 08080 on page No 156 of SSR 2010 (Part-II). |
| 28 | S & F of Factory made single extruded WPC (Wood Polymer Composite) solid door/ window /Ceosetory windows & other Frames/Chowkhat of size 50x100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extrapayment on this account shall be made. |
| 29 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges shall be paid separately. |
| 30 | S&F factory made WPC single extruded 100% lead free ROHS certified board of 18mm thick pre laminated moulded shutter for for kitchen, cupboard, the laminated shutter should be pre laminated side with different design and other side plain white of density not less than 600 Kg/cum manufactured by an ISO 9001:2015 certified company, the 18mm board should be 100% lead free , water proof, termite proof and borer proof and should have good screw holding capacity and complete all as specified and directed. |
| 31 | S&F 40mm flap width of continuous (piano) hinges, mild steel bright finish or electrogalvanised complete all as specified and directed. |
| 32 | S&F 40mm cupboards knob fixed with nut Screw and washer of brass polished complete all as specified and directed. |
| 33 | S & F Second class hardwood plain, solid straight chowkhets and frames, wrought, framed rebited on the solid, rounded or chamfered, put together with glues pinned at joints complete all as specified and directed |
| 34 | S&F IInd class hard wood, 35mm thick skeleton shutters open rebated & prepared to receive, glass, gauge etc. (without sash bars), edge of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR Part I, Section 8, clause 8.24(a); supplied and fitted to chowkahts complete all as specified and directed. |
| 35 | S&F IInd hardwood 40 mm plain framed pannelled shutter (any number of pannels) with panels of timber flats on bothe sides (feather edged) or of veneered particle board medium density wood particle board with commerical face veneers complete all as specified and directed. |
| 36 | S&F 30mm thick flush shutters solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 37 | S&F 100mm size Stainless steel butt hinges complete all as specifed and directed |
| 38 | S&F Stainless steel barrel tower bolt 200mm long of extruded section and fixed complete. |
| 39 | S&F 250mm stainless steel sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 40 | S & F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor, overall length of cover plate 150mm complete all as specified and directed |
| 41 | S&F for aluminium (extruded section) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. |
| 42 | S& F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or using metal nut and bolts complete all as specified and directed. |
| 43 | M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 44 | M&L for preparation of old wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 45 | Taking up or down 15mm bore, steel tubing and connection including cleaning for refixing or removal from site complete all as specified and directed. |
| 46 | Taking up or down 20mm bore, steel tubing and connection including cleaning for refixing or removal from site complete all as specified and directed. |
| 47 | S&F medium grade galvanized steel tubing with all fittings & fixed complete to walls & ceiling or laid in floors 15 mm dia bore pipe (including in short length) complete all as specified and as directed. |
| 48 | S&F tubes medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors 20 mm dia bore pipe (including in short length) complete all as specified and as directed. |
| 49 | S&F in repairs one piece EWC with soft close seat cover and twin flush fittings 660 x 365 x 765 mm (snow white) S trap/P trap 300mm and fittings complete all as directed and as approved.complete all as specified and directed. |
| 50 | S&F in repair viterous China squatting pan, `Orrisa' pattern, size 580 x440 mm white, witht integral foot rests (excluding flushing cistern and flush pipe) including connection to trap,and to flushing pipe, anti-syphonage pipe,etc. complete including making good to floor complete all as specified and as directed. |
| 51 | S&F in repair Vitreous China wash down water closet pan including P or S trap of bore 125/110 mm (pedestal pattern), white or in matching colour of tiles (excluding flushing cistern and flush pipe) including plastic water closet seat, white or in matching colour , closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device and wash down water closet complete all as specified and as directed. |
| 52 | S&F in repair of PVC low level flushing cistern dual flush top push,10 Ltr capacity symphonic action type white as approved, ball valve float valve and handle, flush pipe incl CP bracket complete all as specified and as directed. |
| 53 | S & F in repairs Vitreous China half stall Urinal or bowl type pattern, basin only including connections to flushing pipe, urinal spreader, waste pipe and outgoing pipes fixed in repairs (excluding flushing cistern) complete all as specfied and as directed. |
| 54 | S&F in repairs Viterous China wash basin with full/half Pedestal, white, flat back, size 550x400mm excluding taps etc but including brackets,including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specfied and as directed. |
| 55 | S&F in repair 15mm dia 600 mm long PVC connection including brass check nut at both ends screwed both end complete all as specified and directed. |
| 56 | S&F in repairs CP Health Faucet with 1 mtr metalic Expandable tube & hook complete all as specified and directed. |
| 57 | S&F in repair bib tap long body fancy type cast copper alloy chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule or fixed for 15 mm dia bore pipe complete all as specified and directed. |
| 58 | S&F in repair stop valves/angle valves fancy type chromium plated brass cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions fixed for 15 mm dia bore pipe complete all as specified and directed. |
| 59 | S&F in repair 15mm bore Pillar Brass CP mixer for mixing hot & cold water screwed down for iron pipecomplete all as specified and directed. |
| 60 | S&F in repairs 600x450 mm size of 5.5mm thickness looking mirror, bevelled edge of selected quality glass with aluminium frame made of channel alround,mounted on 6 mm thick commercial ply or AC building board, fitted to wooden plug with CP screws complete all as specified and directed. |
| 61 | S & F 500 ltr Rotational moulded polye thylene water storage tanks (cylindrical vertical with closed top) with Ball brass valves, high pressure, with 20 mm polythene float and flynut complete, screwed for iron pipe or brass ferrule hoisted and fixed in position incl refixing of inlet, outlet & over flow pipe all as specified in SSR Part I and as directed. |
| 62 | S & F 1000 ltr Rotational moulded polye thylene water storage tanks (cylindrical vertical with closed top) with Ball brass valves, high pressure, with 20 mm polythene float and flynut complete, screwed for iron pipe or brass ferrule hoisted and fixed in position incl refixing of inlet, outlet & over flow pipe all as specified in SSR Part I and as directed. |
| 63 | Demolition and breaking up drain pipes (Salt glazed ware, PVC/AC or Reinforced concrete) set in cement mortar,and taking out of trenches, if required, Internal dia of pipe in 75MM/100mm/150MM complete all as specified and directed. |
| 64 | S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. |
| 65 | S&F 110mm dia PVC (SWR) pipes single/double socketed in any length with rubber ring joints, laid in trenches or in floors and jointed complete all as specified and directed. |
| 66 | M&L for PCC 1:3:6 type C-2 (using 40mm grade stone aggregate) as in bed to 110/100 mm dia SGSW /PVC pipes including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed. |
| 67 | S&F 110mm dia PVC (SWR) pipes single/double socketed in any length with rubber ring joints, fixed to walls complete all as specified and directed. |
| 68 | S & F PVC (SWR) bends/sockets any radius 110 mm dia complete all as specified and directed. |
| 69 | S& F stack clamp,110mm/75mm bore made out of 50mm by 5 mm flat iron/pvc and 16 mm dia round stays including bolts and nuts and securing ends of stay to wall or roof complete all as specified and directed. |
| 70 | Hacking out old broken glass of any thicknesssize or description from wooden frames or metal frames fixed with wooden beads/ putty complete all as specified and directed. |
| 71 | S& F 3 mm thick sheet glass ordinary quality and glazing with oil putty wire clips in square n.exc 0.5 sqm in each pane complete all as specified and directed. |
| 72 | Excavation in post holes (or similar holes) each not exc 0.5 cum getting out, returning filling in and rammin earth or broken rubble mixed with earth around in layers not exc 25 cm watering, and removing surplus soil to a distance not exc 50mtr and making good surface in soft/loose soil complete all as specified and directed. |
| 73 | M & L for PCC 1:4:8, Type D-2, (using 40 mm graded aggregate) in foundations, filling and mass concrete complete all as specified and directed. |
| 74 | Demolition of brick work or stone boulder masonry built in cement mortar or cement lime including all quoins, arches, pillars etc, but excluding ashler facings, dressed stonework and precast concrete articles complete all as specified and as directed. |
| 75 | M&L for brick work with sub class 'B' bricks built in CM 1:6 straight or curved on plan & exc 6 m mean radius with old size bricks complete all as specified and directed. |
| 76 | Taking down cement plaster and raking out joints, hacking for key,scrubbing down with water built in cement mortar complete all as specified and directed. |
| 77 | M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:6) and finished even and smooth (without using extra cement) complete all as specified and directed. |
| 78 | M&L for rendering 15mm thick in CM 1:4 other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 79 | M&L for preparation of new plastered or unplastered surface of walls including cornices, pilasters etc and applying two coats of oil bound distemper over a coat of 3mm thick wall care putty including Washing floors, cleaning glass, joinery, electric fittings,wiring etc of drops and splashes and leaving premise, clean and tidy etc complete all as specified and as directed. |
| 80 | M&L for preparation of new plastered or un plastered surface of walls including cornices, pilasters etc and applying two coats of weather proof exterior emulsion paint over a coat of primer complete all as specified and directed. |
| 81 | M&L for preparation of new surfaces of steel and iron work of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 82 | M&L for preparation of old painted steel and iron surface of any description over 10 cm width or girth not otherwise described and applying one coat (finishing coat) of synthetic enamel paint in any tint complete all as specified and directed. |
| 83 | S & F draperly rod/Harrison rails of CP of 25 mm dia with fixing brackets, Stops rollers and rings etc complete all as specified and directed. |
| 84 | M&L for 75mm thick PCC 1:3:6, type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection and paving, laid in slope finished even and smooth without using extra cement including making joints at every 2.5 m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight and complete all as specified and directed. Please Enable Macros to View BoQ information |
