|
| 1 | Demolition of cement concrete in ground floors and pavings in any specification n.exc 15cm thickness complete all as specified. |
| 2 | M&L for 75mm thick PCC 1:3:6 type C2 (using 40mm graded agg) as in plinth protection incl finishing even & smooth without using extra cement complete all as specified and directed. |
| 3 | M&L for 25mm thick PCC (1:2:4) type B-1 (using 20mm graded stone aggregates) as in flooring complete all as specified and directed by Engineer-in-charge. |
| 4 | M&L for 75mm thick PCC 1:2:4 type B2 (using 40mm graded agg) as in floor incl finishing even & smooth without using extra cement complete all as specified and directed. |
| 5 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as spedcified. |
| 6 | S&F for steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing completeosition as indicated, complete all as specified and directed by Engineer-in-charge. |
| 7 | M & L for 1.00mm Plain, black mild steel sheeting in stepped flashings (measured as the minimum rectangle from which the pieces can be cut) complete all as specified and as directed. |
| 8 | M & L for preparation of new or previously untreated steel surfaces including two coat of synthetic enamel (ordinary tint) paint over priming with red oxide,zinc of any description, over 10cm in width or girth, not otherwise described |
| 9 | M& L plain cement concrete 1:2:4 type B0 by using 20mm graded stone agregate as in flooring with water proofing compound @ 2% dosage (1kgs) in 50kg cement including demolition of cement concrete un -reinforced in ground floors and pavings n.exc 15cm thickness complete all as specified. |
| 10 | Supply of SBR based waterproofing compound @ 2% dosage by weight of cement (1kgs) of 50kg cement used to be mixed in cement concrete as water proofing and hardening complete all as specified. |
| 11 | M & L For applying Pitch Free PU based Liquid applied single component elastomeric seamless, water and vapor proof membrane system Nitoproof 600PF for concrete @ 2.50 kg/m2 (2 coats). Typical applications will include roofs, podiums, balconies, floor slabs, suspended floors, patios, bathrooms, inspection pits, swimming pools, bridge decks, Conforming Tensile Strength (2N/mm2 ) (ASTM D412) / Tear resistance (15 kN/m) (ASTM D624-00 and Crack bridging (ASTM C836 / ASTM C1305 modified)2mm. After 72 hours of curing, flood test can be carried out to a minimum depth of 50mm of water for 24 hours. Drains shall be plugged and barriers placed to contain the water. Note : All above operations to be done in presence of auth applicator in order all as specified and directed. |
| 12 | M&L Non-skid ceramic colour tiles (premium/special quality) 7 to 8 mm thick , (square/rectangular), area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over and including 15 mm thick screed bed in cement sand mortar 1:6 including dismanthing floor/hearth or wall tilling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off premises complete all as specified and as directed. |
| 13 | M&L Glazed ceramic colour tiles of size 450 x 300 x 7mm thick (premium/special quality) in vertical wall etc set and jointed with neat cement slurry and pointed in white or colour cement to match with the colour of tile over and including 10 mm thick backing course in cement sand mortar 1:4 including dismanthing floor/hearth or wall tilling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off premises complete all as specified and directed. |
| 14 | M & L for double charge, stainfree, vitrified tiles, Premium (1st) quality straight edge, coloured tiles 600 X 600 mm and 8-10 mm thick, as in floors etc. in any pattern of light coloured tiles as in approved shade, set in neat cement , including r and including 15 mm thick screed bed in cement sand mortar 1:6 including dismanthing floor/hearth or wall tilling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off premises complete all as specified and as directed. |
| 15 | All as per item No 14 above but as in skirting, steps etc in vertical surfaces. |
| 16 | M&L for glazed vitrified tiles 8-10mm thick (square / rectangular) polished, area of each tiles exc 0.36 Sqm not exceeding 0.72 Sqm, in floor etc set and jointed in neat cment slurry and pointed in white or coloured cement to match including screed bed 15mm thick in CM 1:6 complete all as specified and as directed by the Engineer-in-Charge. |
| 17 | M&L for glazed vitrified tiles 8-10mm thick (square / rectangular) polished, area of each tiles exc 0.36 Sqm not exceeding 0.72 Sqm, in vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed plaster 10mm thick in CM 1:4 complete all as specified and as directed by the Engineer-in-Charge. |
| 18 | M & L for Non - skid Ceramic colour tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including including including dismantling floor, removing rubbish off the premises and other necessities of job complete all as specified & directed by Engineer-in-charge. Note : Work will be in patches or in bulk. |
| 19 | All as per item No 18.00 above but as in skirting, steps etc in vertical surfaces with 6-8mm thick bedding. |
| 20 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premise complete all as specified and directed by Engineer-in-charge. |
| 21 | Material & Labour for ceramic out door tiles 400mx400mx10mmm thick digital design set, jointed and pointed in neat cement slurry as in floors with grey cement over & including over screed bed or bedding layer of mortar 15 mm thick Cement Mortar 1:6 complete all as specified.Note : Work will be in patches or in bulk |
| 22 | M & L for Machine cut kota stone slab flooring 18-20mm thick over, laid over cement screed base , jointed and pointed with grey cement slurry mixed with pigment over 20mm thick cement mortar 1:6 screed bed to match the shade of the slab including rubbing and polishing including dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc. laid beded and pointed in any morter complete all as specified and directed. |
| 23 | M & L for Machine cut kota stone slab 18-20mm thick in riser of steps, skirting, dado and pillar over 10 mm thick cement plaster 1:3 jointed and pointed with grey cement slurry mxed with pigment to match the shade of the slab including rubbing and polishing dismantling Stone slabs and tiles of any description or thickness laid beded and pointed in any morter complete all as specified and directed. |
| 24 | M & L for Mirror polishing on old marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete. Please Enable Macros to View BoQ information |
| 25 | M & L for Mirror polishing on old marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete. Please Enable Macros to View BoQ information |
