|
| 1 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. (DSR-15.56) |
| 2 | 12mm thick plaster in cement & fine sand of 1.25 fineness modulous mortar in 1:4 Including supply of all materail labour T&P required for proper completion of the work (DSR-13.1.1) |
| 3 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wallsurface to prepare the surface even and smooth complete. (DSR-13.80) |
| 4 | FINISHING WITH DELUXE MULTI SURFACE PAINT SYSTEM FOR ENTERIOR AND EXTERIOR USING PRIMER AS PER MANUFACTURER SPECIFICATIONS CPWD DSR-2023 DSR 13.48.1 |
| 5 | Painting with synthetic enamel paint of approved brand andmanufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. (DSR-13.62.1) |
| 6 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws (DSR-9.20.1) |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources). DSR 4.1.8 |
| 8 | Providing and laying Vitrified tiles600 x 600 (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. (DSR -11.41.2) |
| 9 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (DSR - 8.31) |
| 10 | Supply & Fixing Of Masquito Jali. (MR) |
| 11 | Removing mortar from from and cleaning stones and concrete articles i/c necessory etc complete in cement mortar CPWD DSR-2023 DSR 15.11.2 |
| 12 | P.C.C. work with cement approved coarse sand and 2cm Gauge approved stone ballast in the proportion of 1:1.5:3 in S/o all materials required for proper completion of the work. CPWD DSR-2023 DSR 4.1.2 |
| 13 | Supply of Fixing Murga Jali PWD SOR2022 ITEM 26 |
| 14 | Supply & fixing PVC pipe 110mm (DSR 12.41.2) |
| 15 | Window Repair And Other Hidden Miscellenous Work. |
| 16 | Wiring points for light with 1.5 sq.mm. FR PVC insulated multistrand single core copper conductor cable in H.G.PVC conduit concealed in the wall with 14 SWG copper eath continity wire,piano type switch & ceiling rose/angle/batten holder on 3 mm thick phenolic laminated backlite sheet etc complete in all respect as directed including matching colour wah as per SI.No.131(c) |
| 17 | Wiring points for two ways light with 1.5 sq.mm. FR PVC insulated multistrand copper conductor cable in H.G.PVC conduit concealed in the wall with 14 SWG copper eath continity wire and two number two way piano type switches & ceiling rose/angle/batten holder on 3 mm thick phenolic laminated sheet etc complete in all respect as directed including matching colour wah as per SI.No.132(c). |
| 18 | Wiring points for fan / fresh air fan (light duty exhaust fan ) with 1.5 sq.mm. FR PVC insulated multistrand single core copper conductor cable in heavy gauge PVC conduit concealed in the wall with 14 SWG copper eath continity wire, piano type switch & ceiling rose on 3 mm thick phenolic laminated backlite sheet etc complete in all respects including matching colour wah as per SI.No.133(c). |
| 19 | Wiring points for plug with 1.5 sq.mm. FR PVC insulated multistrand copper conductor cable in heavy gauge PVC conduit pipe concealed in the wall complete with 14 SWG copper eath continity wire, piano type switch & socket etc complete in all respects including matching colour wah as per SI.No.134(c). |
| 20 | Wiring points for exhaust fan with 1.5 sq.mm. FR PVC insulated multistrand copper conductor cable in heavy gauge PVC conduit pipe concealed in the wall complete with 14 SWG copper eath continity wire,15A piano type switch & ceiling rose on 3 mm thick phenolic laminated backlite sheet etc complete in all respects including matching colour wah as per SI.No.137(c) |
| 21 | Supply and fixing of switch box made up of 16 WSG (1.5 mm) M.S.Sheet of 150mm x 150mm x 65mm size duly painted with red oxide primer and flushed in wall including cutting of brick work,fixing it to the level with cement sand mortar,including matching colour wash with supply of all material,labour and T&P required for proper completion of the work as direrected at site by the Engineer in charge as per SI.No.160. |
| 22 | Supply and wiring of submain with two numbers 2.5 sq.mm FR PVC insulated multistrand copper conductor cable in 20 mm dia heavy duty (2 mm thick) PVC coduit concealed in wall,complete with one number 14 SWG copper earth continuity wire including matching colour wash etc.,complete in all respects. |
| 23 | Supply and wiring of submain with two numbers 4 sq.mm FR PVC insulated multistrand copper conductor cable in 20mm dia heavy duty (2 mm thick) PVC coduit with one number4.00 sq.mmFR PVC insulated multistrand copper conductor as earth continuity wire including matching colour wash etc.,complete in all respects as per SI.No.217(c). |
| 24 | Supply and wiring of submain with two numbers 6.00 sq.mm FR PVC insulated multistrand copper conductor cable in 20mm dia heavy duty (2 mm thick) PVC coduit with one number4.00 sq.mmFR PVC insulated multistrand copper conductor as earth continuity wire including matching colour wash etc.,complete in all respects as per SI.No.218(c). |
| 25 | Supply and fixing of single wall light bracket made of brass on matching polished MDFEG board brass including connection etc.as required. |
| 26 | Supply and fixing of 240 volts'L'series miniature circuit breaker 5 Amp.to 32 Amp (10KA) in existing MCB.DB complet with cnnections as required as per SI.No.1002 CAT A. |
| 27 | Supply and fixing of 8 ways SPN distribution board without MCB complete in all respect,as directed at site by Engineer in charge as per SI.No.1024. |
| 28 | Erection and testing of ceiling fan and regulator for room height upto 3.5 mts.including supply of 3 mm thick G.I.down rod 19 mm dia duly painted complete in all respect as per SI.No.1116. |
| 29 | Erection and testing of exhaust fan on the existing hole with suitable size of rag bolts nuts and washers etc.complete in all respect as per SI.No.1120. |
| 30 | Supply and fixing of power plug with 15Amp/250Volt flush type witch and 5 pin 15 A/250 Volt flush type universal socket switch in suitable M.S.box of 175mm x 100mm x 50mm size with phenolic laminated bakelite sheet cover 3mm thick with brass machine screw and cup washer as per SI.No.1139. |
| 31 | Supply and fixing of electronic fan regulator 120-280 watt,ISI marked,on the existing switch board including making connections,required material labour and T&P etc. for proper completion of the work to the satisfaction of Engineer in charge of work as per SI.No.1203(A) |
| 32 | Supply and fixing of 23 watt CFL approved make etc.complete as required. |
| 33 | Providing and fixing in position wall panelling at all heights with integral densified calcium silicate panels/tiles of size 595 x 595mm, having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity <0.043 W/m K as per ASTM 518:1991, comprising of a frame made from especially fabricated galvanised mild steel sheet 0.50 mm thick pressed section (galvanizing @120 grams per sqm including both sides) i.e.vertical studs of size 48 x 34 x 36 mm are placed at 600mm center to center in a floor and ceiling channel section of size 50 x 32m fixed to the floor and soffit at 600mm centers using 12mm dia,50mm long wedge type expanded zinc alloy dash fastner with 10mm bolt. This same channel is then to be fixed in horiziontal direction at 600mm center to center so as to form a grid of 600mm x 600mm. Glasswool of 50mm thickness is then to be inserted in the slots and finally calcium silicate non combustible panels/tiles are to be screw fixed with self tapping pan head nickel coated mild steel screws of size 13 x 3.2mm on to this grid leaving an even groove of 1 mm between the panels. The joints between the panels are to be duly jointed and finished using recommended jointing calcium silicate based compound and fiber joint tape roll 50mm wide (90 metre )roll and two coats of primer suitable for panelling as per manufacturer's specification as per direction of Engineer-in-Charge all complete. |
| 34 | Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991, in true horizontal level suspended on inter-locking metal powder coated T-Grid of hot dipped galvanised iron section of 0.40 mm thick on Silhouette profile,rotary stiched double webbed white with 6mm reveal profile (white/black),comprising of main-T runners of size 15x42mm of length 3000 mm, cross - T of size 15x42 mm of length 1200 mm and secondary intermediate cross-T of size 15x42 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items(galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm.Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. |
| 35 | Supply/Providing Of SUNVIEW Plastic Chair. |
| 36 | Supply/Providing Of WELLMADE ALMIRAH Steel Bookcases. |
| 37 | Supply/Providing Of Table (BATRA STEEL FURNITURE). |
| 38 | Supply/Providing Of SAMSUNG 4 Star LED (Light Emitting Diode). |
| 39 | Supply/Providing Of MICROTEK INVERTER. |
| 40 | Supply/Fixing Of acer Intel Core i3 13100 All in One P.C. |
| 41 | Supply/Providing Of MICROTEK U.P.S. |
| 42 | Supply/Providing Of Wooden Self Study Library Furniture Tables. (computer) |
| 43 | S/F of Closed Circuit Television (CCTV Cemera) With All Comp. |
| 44 | Instrumentation Installation & Loading/Unloading Charges. |
| 45 | S/F Of Sign Board And Photograph Please Enable Macros to View BoQ information |
