|
| 1 | Taking down Chowkhats or frames n.exc 1.5 sqm each with shutters (without taking off shutters from the frames) and making good disturbed surfaces including removing disposable materials from worksite outside MD land at any distance complete all as specified and directed. |
| 2 | Taking down chowkhats or frames exc 1.5 sqm and n.exc 4 Sqm each with shutters (without taking off shutters from the frames) and making good disturbed surfaces including removing disposable materials from worksite outside MD land at any distance complete all as specified and directed. |
| 3 | Taking down shutters of any description exc 1 Sqm and n.exc 2 Sqm each and making good disturbed surfaces including removing disposable materials from worksite outside MD land at any distance complete all as specified and directed. |
| 4 | Taking down shutters of any description n.exc 1 Sqm each and making good disturbed surfaces including removing disposable materials from worksite outside MD land at any distance complete all as specified and directed. |
| 5 | Taking down shutters, repairs and refixing in same opening of any description n.exc 1 sqm complete all as specified and directed. |
| 6 | Taking down shutters of any description exc 1 Sqm and n.exc 2 Sqm each and refixing the same after rescuring / easing complete all as specified and directed. |
| 7 | Resuring or easing and adjusting without taking down of shutter of any description area exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and directed. |
| 8 | M&L for 2nd Class Hard wood Plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints, supplied and fixed including tarring back of chowkhats with tar or coal tar black paint complete all as specified and directed. |
| 9 | M&L for 125 mm x 60 mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strikes plate etc complete as specified and directed. |
| 10 | M&L for for 105 mm x 60 mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strikes plate etc complete all as specifiedand directed. |
| 11 | S&F for 35 mm thick plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I) complete all as specified and directed. |
| 12 | M&L for 35 mm thick, IInd class Hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc (without sash bars), edges of framing plain,chamfered or rounded, fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR part-I, Section-8, clause 8.24 (a) supplied and fitted to chowkhats complete all as specified and directed. |
| 13 | M&L for 30 mm thick, IInd class Hard wood, Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into square with plain, chamfered or rounded, mitred and rebated sash bars, any numbers with edge of sash bars, forming moulded for window etc provided with stile and rails as specified in SSR part-I, Section-8, clause 8.24 (b) supplied and fitted to chowkhats complete all as specified and directed. |
| 14 | S&F for Flush shutters, 30 mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 15 | S&F for Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed. |
| 16 | S&F for Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed. |
| 17 | M&L for mild steel framed work such as grills, gratings etc, with ends of bars shouldered and/ or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 18 | S&F for solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with Mild steel square tube and fixing in opening as per specifications and drawings complete all as specified and directed. |
| 19 | S&F for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing mentioned in SSR complete all as specfied and directed. |
| 20 | S&F for Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fireresistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs.The frame shall be covered with fiber glass from all sides.M.S. stay shall be provided at the bottom to steady the frame., complete all as specified and directed. |
| 21 | S&F for existing door frames 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames, complete all as specified and directed. |
| 22 | S&F for factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 23 | S&F for anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed. |
| 24 | S&F for anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified and directed. |
| 25 | S&F for anodised aluminium window and ventilator shutters, sliding or fixed type without sash bar, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and directed. |
| 26 | S&F for anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and directed. |
| 27 | S&F for stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.4 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed. |
| 28 | S&F for 5.5 mm thick sheet glass, ordinary quality, in squares not exceeding 0.5 Sqm in each pane and fixed in aluminium shutters, glazed with putty or fixed with beads complete all as specified and directed. |
| 29 | S&F for 3 mm thick Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane , glazed with oil putty complete all as specfied and directed. |
| 30 | S&F for 4 mm thick figured glass, pin head type, in squares n.exc 0.5 Sqm in fixed in aluminum shutters, glazed with oil putty complete all as specfied and directed. |
| 31 | S&F for 3 mm thick figured glass, pin head type, in squares n.exc 0.5 Sqm in fixed in aluminum shutters, glazed with oil putty complete all as specfied and directed. |
| 32 | S&F in repair stainless steel wire cloth, 0.36 mm nominal dia. of wire and average width of aperture 1.4 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 33 | S&F for butt hinges, medium weight, cold rolled mild steel, 100 mm size complete all as specified and directed. |
| 34 | S&F for aluminium, anodised, barrel tower bolts of extruded section and fixed, 150 mm length of bolt complete all as specified and directed. |
| 35 | S&F for aluminium, anodised, barrel tower bolts of extruded section and fixed, 200 mm length of bolt complete all as specified and directed. |
| 36 | S&F in repair aluminium, anodised, barrel tower bolts of extruded section and fixed, 150 mm length of bolt complete all as specified and directed. |
| 37 | S&F in repair aluminium, anodised, barrel tower bolts of extruded section and fixed, 200 mm length of bolt complete all as specified and directed. |
| 38 | S&F for aluminium handle fabricated type anodised 125 mm size etc complete all as specified and directed. |
| 39 | S&F in repair aluminium handle fabricated type anodised 125 mm size etc complete all as specified and directed. |
| 40 | Dismantling timber scantlings 40 sqcm and over in section,unframed work in any position including removing of unserviceable material from work site complete all as specified and directed. |
| 41 | M&L for 2nd class hard wood (well seasoned) scantling clean sawn as in unframed work etc complete all as specified and directed. |
| 42 | S&F for aluminium anodised sliding door bolt 300mm long with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 43 | S&Fin repairs for aluminium anodised sliding door bolt 300mm long with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 44 | M&L for preparation of untreated new wooden surface of any description over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed. |
| 45 | M&L for preparation of new steel surfaces of any description exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer compete all as specified and directed. |
| 46 | M&L for preparation of new steel surfaces of any description not exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer compete all as specified and directed. |
| 47 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness, including cover fillets including removing rubbish obtained from dismantling from worksite outside MD land at any distance complete all as specified and directed. |
| 48 | M&L for non asbestos fibre cement building board, 4mm thick, fixed to aluminium frame work with screw as in ceiling in flat or sloping complete all as specified and directed. |
| 49 | S&F for aluminium anodised snap grid frame work as in false ceiling all as specified size of grid 605 X 605 mm with aluminium main T section of size 36.5 X 23.5 X 1.6 mm and cross T of size 23.5 X 23.8 X 1.6 mm with aluminium wall angle of size 36.5 X 23.5 X 1.6mm with suspender complete all as specified and directed. |
| 50 | S&F for solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications including PVC cover fillet of matching colour, grid size not exc 800mm complete all as specified and directed. |
| 51 | S&F in repair mild steel 150 mm long, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 52 | M&L for anodized aluminum frame for doors, windows, ventilators with one or more rebate including joining cleat for fixing etc complete all as specified and directed. |
| 53 | M&L for aanodized door shutters, aluminum section weighting 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handle four Nos in each door, hinges anodized aluminum snap beading screws etc with powder coating thickness not less than 50 micron complete all as specified and directed. |
| 54 | M&L for anodised aluminium window and ventilator shutters, sliding or fixed type without sash bar, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. with powder coating thickness not less that 50 micron complete all as specified and directed. |
| 55 | S&F for anodised aluminium grill (anodised transparent or dyed to required shade according to IS:1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with CP brass/ stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening complete all as specified and directed. |
| 56 | S&F in repair Mortice lock, 2 lever ,vertical type, size 100mm complete all as specified and directed. |
| 57 | S&F in repairs veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces, fixed with screws to timber frame work complete all as specfied and directed. |
| 58 | M&L for 2nd Class Hardwood size not exceeding 3 sqcm in section Plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads complete all as specified and directed. Please Enable Macros to View BoQ information |
| 59 | M&L for 2nd Class Hardwood size not exceeding 3 sqcm in section Plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads complete all as specified and directed. Please Enable Macros to View BoQ information |
