|
| 1 | M&L for preparation of old plastered or unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of white wash on old decorated surfaces of walls including washing floors, cleaning glass, joinery, electrical fittings, wiring etc, of drops and splashes complete all as specified and directed. |
| 2 | M&L for preparation of old plastered or unplastered surfaces of ceiling by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of white wash on old decorated surfaces of ceiling including washing floors, cleaning glass, joinery,electrical fittings, wiring etc, of drops and splashes complete all as specified and directed. |
| 3 | M&L for preparation of old decorated distempered surfaces of walls by washing, rubbing down and stopping of distempered and painted surfaces and distempering walls by applying one coat of acrylic based distemper emulsion of any tint/shade complete all as specified and directed. |
| 4 | M&L for preparation of old surfaces of walls by complete removal of existing treatment and applying wall care white putty thickness not less than 2mm and sand papering surfaces to achieve smooth surfaces and applying two coats of acrylic based distemper emulsion over a coat of primer, white or tinted including washing floors, cleaning glass, joinery, electrical fittings, wiring etc, of drops and splashes complete all as specified and directed. |
| 5 | Preparation of old decorated surface distempered surfaces of ceilings by washing, rubbing down and stopping of distempered and painted surfaces and distempering ceilings by applying one coat of acrylic based distemper emulsion of any tint/shade complete all as specified and directed. |
| 6 | S&F for preparation of old painted wooden /wood based materials surfaces of any description, not otherwise described, over 10 cm width or girth and painting one coat with synthetic enamel paint (1st quality) including cleaning, stopping and rubbing down and removing all dropings etc complete all as specified and directed. |
| 7 | S&F for preparation of old painted wooden /wood based materials surfaces of any description, not otherwise described, not exceeding 10 cm width or girth and painting one coat with synthetic enamel paint (1st quality) including cleaning, stopping and rubbing down and removing all dropings etc complete all as specified and directed. |
| 8 | S&F for preparation of old painted steel and iron surfaces of any description, not otherwise described,over 10 cm width or girth and painting one coat with synthetic enamel paint including cleaning, stopping and rubbing down and removing all drops etc complete all as specified and directed. |
| 9 | S&F for preparation old painted steel and iron surfaces of any description, not otherwise described, not exceeding 10 cm width or girth and painting one coat with synthetic enamel paint including cleaning, stopping and rubbing down and removing all drops etc complete all as specified and directed. |
| 10 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thick above or below ground level, including removing of demolished material from work site at any distance outside MD land complete all as specified and directed. |
| 11 | M&L for PCC 1:2:4 type B-1, (using 20 mm graded stone aggregate) 40 mm thick and finished the cement concrete surface even and smooth without using extra cement complete all as specified and directed. |
| 12 | M&L for Plain cement concrete 1:3:6 type C2, using 40 mm graded crushed stone aggregate,75 mm thick , as as in path / plinth protection/paving finished even and smooth without using extra cement complete all as specified and directed. |
| 13 | S&F for dividing strips, 3 mm thick 38 mm wide and inserting in position to conform to design and complete all as specified and directed. |
| 14 | Demolition of brickwork or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins,arches, pillars,etc. but excluding ashlar facings, dressed stone work and precast concrete articles including removing of demolished material from work site complete all as specified and directed. |
| 15 | M&L for Brickwork with old size sub class 'B' locally available bricks, having compressive strength not less than 75Kg sqcm, straight or curved on plan excd 6 M mean radius and built in cement and sand mortar 1:6 complete all as specified and directed. |
| 16 | M&L for Brickwork with old size sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement and sand mortar 1:4 complete all as specified and directed. |
| 17 | Taking down cement plaster on brick or stone walls etc. including racking out joints, hacking for key, scrubbing down with water, any description etc.including removing of rubbished material from work site complete all as specified and directed. |
| 18 | M&L for rendering 15mm thick in cement mortar 1:6 on brick work or concrete surface of wall and finished surface even and smooth without using extra cement complete all as specified and directed. |
| 19 | M&L for preparation of new surfaces of walls and applying white wall care putty thickness not less than 2mm and sand papering surfaces to achieve smooth surfaces and applying two coats of acrylic based distemper emulsion over a coat of cement based primer, white or tinted including washing floors, cleaning glass, joinery, electrical fittings, wiring etc of drops and splashes complete all as specified and directed. |
| 20 | M&L for preparation of new plastered or unplastered surafces of walls and applying three coats of white wash including washing floors, cleaning glass, joinery,electrical fittings, wiring etc, of drops and splashes complete all as specified and directed. |
| 21 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces, in cement and sand mortar 1:4 and top surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 22 | M&L for preparation of newly plastered surface of wall and applying two coat of cement base paint over a coat of cement based primer of any tint/shade including washing floors, etc, of drops and splashes complete all as specified and directed. |
| 23 | M&L for rendering 5mm thick on concrete surfaces in ceiling , finished even and smooth without using extra cement, in cement and sand mortar 1:3, complete all as specified and directed. |
| 24 | M&L for preparation of new plastered or unplastered surafces of ceilings and applying three coats of white wash including washing floors, cleaning glass, joinery,electrical fittings, wiring etc, of drops and splashes complete all as specified and directed. |
| 25 | S&F in repair aluminium body (extruded section) body Door closer hydraulically regulated, designation No. 3, universal type , suitable for door shutters 851 to 1000 mm in width and of weight between 61 to 80kg complete all as specified and directed. |
| 26 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads upto 1.5 sqm complete all as specified and directed. |
| 27 | S&F for 3 mm thick (nominal) Sheet glass, ordinary quality, in squares, not exceeding 0.50 sqm in each pane fixed with oil putty complete all as specified and directed. |
| 28 | S&F for 3 mm thick figured glass, pin head type and ordinary quality, in squares, not exceeding 0.50 sqm in each pane fixed with oil putty complete all as specified and directed. |
| 29 | S&F in repair Galvanised steel wire cloth, 0.56 mm nominal dia. of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 30 | S&F in repair 25mm dia Curatin rod, anodised aluminium alloy chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed. |
| 31 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), in floors, aprons etc .laid dry or laid dry and pointed including removing of demolished material from work site at any distance outside MD land complete all as specified and directed. |
| 32 | M&L for Non Skid ceramic coloured tiles (1st quality) 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floor set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tiles over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 33 | M&L for glazed ceramic coloured tiles, 350 mm x 250 mm x 7mm/ 450 x 350 x 7mm thick, in dado/skirting and vertical surfaces set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tiles over and including rendering 10 mm thick in cement morter 1:4 for laying of tiles complete all as specified and directed. |
| 34 | M&L for vitrified ceramic (square/rectangular) light shade coloured polished tiles, (1st quality) area of each tiles not exc 0.36 sqm and 7-8mm thick, in floors etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tiles over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 35 | Cleaning of over head tank and taking out of scale and dirts from inside the tank and washing with bleaching powder and again washing with clean water, tank capacity upto 500 litre complete all as specified and directed. |
| 36 | Cleaning of over head tank and taking out of scale and dirts from inside the tank and washing with bleaching powder and again washing with clean water, tank capacity exc 500 litres but not exceeding 1000 litre complete all as specified and directed. |
| 37 | Dismantling PVC water tanks exceeding 250 litres but not exceeding 500 litres capacity, including removing ball valve and removing unserviceable tank from work site complete all as specified and directed. |
| 38 | Dismantling PVC water tanks exceeding 500 litres but not exceeding 1000 litres capacity, including removing ball valve and removing unserviceable tank from work site complete all as specified and directed. |
| 39 | S&F for rotational moulded polyethylene multilayer water storage tanks (cylinderical vertical with closed top) 500 litres capacity including 15 mm bore ball valve, hoisted and fixed in position (ISI Marked embossed) complete all as specified and directed. |
| 40 | S&F for rotational moulded poly-ethylene multilayer water storage tanks (cylinderical vertical with closed top) 1000 litres capacity including 20 mm bore ball valve ,hoisted and fixed in position complete all as specified and directed. |
| 41 | S&F in repair 20 mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gms) screwed for 20 mm bore dia. pipe or brass ferrule complete all as specified and directed. |
| 42 | S&F in repair 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including flush pipe and bracketes ISI marked embossed complete all as specified and directed. |
| 43 | S&F in repair vitreous china wash basin (WHB) white, flat back, size 550 mm x 400 mm (1st quality) including brackets, waste fittings, brass Chromium plated for glazed basins etc. with long screw shanks and fly nuts, flange end embedded in red lead cement, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply pipe and supply of taps complete all as specified and directed. |
| 44 | S&F in repair glass corner (1st quality) consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long with necessary fixing arrangement complete all as specified and directed. |
| 45 | S&F for PVC Connections 15 mm dia and 600 mm long suitable for pipe with PTMT nut complete all as specified and directed. |
| 46 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete including removing demolished material from work site all as specified and directed. |
| 47 | M&L for 20 mm thick Granite ( of any type) work ( table rubbed and polished) in steps, jambs, pillars, window cills, cooking plateforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 20mm thick screeding in cement mortar 1:6 complete all as specified and directed. |
| 48 | S&F in repair looking Mirror 6-8 mm thick float glass with bevelled edges, fixed to wall over full length of wash basin platform using chromium plated brass screws and cup washers with plastci rawl plugs, including drilling holes in wall, packing and making good the disturb surfaces complete all as specified and directed. |
| 49 | S&F in repair stainless steel sink with draining board , made out of 1mm thick sheet for kitchen or laboratory with plug, washers, waste pipe, cast iron cantilever brackets, connecting union overall size 37\\" (L) x 18\\" (W) x 8\\"(D) complete all as specified and directed. |
| 50 | S&F in repair stainless steel sink , made out of 1mm thick sheet for kitchen or laboratory with plug, washers, waste pipe, cast iron cantilever brackets, connecting union overall size 24 \\"(L) x 18\\" (W) x 8\\" (D) complete all as specified and directed. |
| 51 | S&F in repair Shower Rose 125mm size Chromium plated with swivel joints, any size, including fixing to steel pipe or union of 15 mm dia complete all as specified and directed. |
| 52 | Demolition of Cement concrete (reinforced) of any description and in any position not otherwise specifically provided for including reinforced cut to facilitate demolition complete including removing demolished material from work site complete all as specified and directed. |
| 53 | M&L for precast reinforced cement concrete 1:2:4 type B-1 as in landings, cover slabs (for manholes etc) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set un cement mortar 1:6 complete all as specified and directed. |
| 54 | M&L for Mild steel deformed or twisted bars (TMT) 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or higher complete all as specified and directed. |
| 55 | S&F in repair, central hole basin mixer swan neck, cast copper alloy with capstan head, chromium plated screwed down, high pressure with or without lettered \\"hot\\" or \\"cold\\" with long screwed shank and fly nuts screwed for iron pipe of 15mm bore complete all as specified and directed. |
| 56 | S&F in repair Single Lever Wall Mixer 3-in-1 System with Provision for both Hand Shower and Overhead Shower Complete with 115 mm Long Bend Pipe, Connecting Legs & Wall Flange (without Hand & Overhead Shower) complete all as specified and directed. |
| 57 | S&F in repair waste pipe 32 mm bore Low density Polyethylene pipes (LDPE) of pressure rating 6 Kgf/cm2 fixed to wash basin / sinks as waste pipe complete all as specified and directed. |
| 58 | S&F in repair health faucet CP brass with minimum 1.50m long CP flexible pipe, Hose & Wall Hook connection etc complete all as specified and directed. |
| 59 | S & F in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60 cm long between flanges complete all as specified and directed. |
| 60 | S&F in repair of Stop Valve (angle valve) 15 mm dia CP Fancy type cast copper alloy, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 61 | S&F in repair CP fancy type bib tap (long body) 15 dia cast copper alloy with crutch or butterfly handle ,screwed down,screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 62 | S&F in repair 15mm dia fancy type pillar taps, cast copper alloy with capstan heads chromium plated screwed down, high pressure with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed. |
| 63 | S&F in repairs stainless steel plate rack (Utensil rack) of size 31x 36 x10 inch made with 0.63mm thick stainless steel sheet provided with brass screw including necessary fittings ,nut bolts complete all as specified and directed. |
| 64 | S&F in repair vitreous China white wash down water closet (padestal pattern), plastic water closet seat, black, closed pattern with recessed bottom and cover and mild steel CP hinging device, polyethylene flush pipe of low or high density 32 mm dia for cistern complete all as specified and directed. |
| 65 | S&F in repair Plastic water closet seat with cover, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 66 | S&F in repair vitreous China white Squatting pan ,'Orissa' pattern size 580 mm x 440 mm with integral foot rests water closet) with 'P' or 'S' trap front or back inlet complete including cement concrete for bedding, connection to drain pipe and to flushing pipe, anti syphonage pipe etc complete all as specified and directed. Material and labour laying well burnt old size bricks, straight or curved on plan , laid flat with width equal to length of brick , laid dry over electric cable for protection all as specified. Please Enable Macros to View BoQ information |
