|
| 1 | Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness incl part chipping (below or above ground level) complete all as specified and directed. |
| 2 | Dismantling of wall tile, floor tile, dado including bedding but backing and rubbish off permises complete all as specified and directed. |
| 3 | M&L for non skid ceramic coloured joint free tiles 10 mm thick area of each tile exceedeing 0.18 sqm but n.exc 0.38 sqm (600x600), in floors, set and jointed in neat cement slurry and pointed in white cement to over and including 15 mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 4 | M&L for non skid ceramic coloured joint free tiles 7 to 8 mm thick area of each tile exceedeing 0.18 sqm but n.exc 0.38 sqm (600x600), as in vertical surfaces such as skirting / dado set and jointed in neat cement slurry and pointed in white cement to over and including 10 mm thick backing in CM (1:4) complete all as specified and directed. |
| 5 | M&L for machine cut Kota stone slab flooring, 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing and polishing (granite finish) and exposed edges of Kota stone shall be rounded including 20mm thick screed bed to floor finishes in cm 1:6 complete all as specified and directed. |
| 6 | M&L 25 mm thick cement concrete (1:2:4), type B-0, using 12.50 mm graded aggregate as in floors including finishing the surface rough & even for receiving kota/tiles complete all as specified and directed. |
| 7 | Demolition of brick work built in cement mortar including all quions, arches, pillars, etc complete all as specified and directed. |
| 8 | M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed. |
| 9 | M&L for PCC 1:3:6 type C2 using 40mm graded stone aggregate, 75mm thick in plinth protection laid in panels and finished even and smooth without using extra cement including necessary form work complete all as specified and directed. |
| 10 | Taking down cement plaster on wall/ceiling/roof etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and as directed. |
| 11 | M&L 10 mm thick rendering on fair faces of bk /concrete surfaces in CM (1:6), finished even and smooth (without using extra cement ) complete all as specified and directed. |
| 12 | M&L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions and finished the surfaces even and fair without using extra cement complete all as specified and directed.Note : Liquid WPC will be measured and paid separately. |
| 13 | Supply only Integral water proofing compound complete |
| 14 | M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate in copings, kerbs, and the like all as directed incl necessary form work complete all as specified and directed. |
| 15 | Taking down chowkats or frame with shutters of any description (without taking off shutters from the frames) n. exc 1.5 Sqm each complete all as specified and directed. |
| 16 | All as per above item No but exc 1.5 Sqm but n.exc. 4 Sqm each complete all as specified and directed. |
| 17 | Taking down shutter of any description exc 1.00 sqm but n exc 2 sqm each and removing to store complete all as specified and directed. |
| 18 | S & F 35 mm thick factory Made moulded glazed/gauged door with pre pressed lamination on both side, solid core construction & prepaid to receive glass/wire mesh including fixing of SS wiremesh of nominal dia 0.36 mm , 2 Nos door Aluminium handle, 0.3 Nos SS butt hing of 100mm , 2 nos Aluminium tower bolt 150mm length in each shutter complete all as specified in SSR Part I and as directed and fitted to chowkhats. |
| 19 | S & F 35 mm thick Factory made moulded flush door with pre pressed lamination on both side, solid core construction 2 Nos Aluminium door handle, 0.3 Nos SS butt hing of 100mm , 2 nos Aluminium tower bolt 150mm length and 300 mm length Aluminium sliding door bolt in each shutter complete all as specified in SSR Part I and as directed and fitted to chowkhats. |
| 20 | M&L for Powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleats for fixing etc.(minimum thickness of powder coating 50 micron) complete all as specified and directed. |
| 21 | S & F Aluminium powder coated (minimum thickness of powder coating 50 micron) partition wall of size 83.50x44.45x1.62mm including rubber gasket, beading, anodised aluminium snap beading, screws, anodised aluminium fittings ,fixing 5.00 mm thick glass or ACP sheet with necessary rubber beading gasket etc including necessary plaster, painting ,cill and making good to disturbed portion all as specified and directed. |
| 22 | S & F Aluminium powder coated (minimum thickness of powder coating 50 micron) door with frame top and sides of size 83.50x44.45x1.62mm ( Section No 19549), and shutter top rail and stile of size 92x38x1.70 mm ( Section No 21339) and Lock and bottom rail of size 125x37x1.80 mm ( Section No 19634) including rubber gasket, beading, anodised aluminium snap beading, screws, anodised aluminium fittings such as butt hinges/Pivot hinges 100 mm long (3 Nos.), handle (2 no.), Lock 06 Lever and locking arrangement ,fixing 5.00 mm thick glass with necessary rubber beading gasket etc including necessary plaster, painting ,cill and making good to disturbed portion all as specified and directed. Please Enable Macros to View BoQ information |
| 23 | S & F Aluminium powder coated (minimum thickness of powder coating 50 micron) door with frame top and sides of size 83.50x44.45x1.62mm ( Section No 19549), and shutter top rail and stile of size 92x38x1.70 mm ( Section No 21339) and Lock and bottom rail of size 125x37x1.80 mm ( Section No 19634) including rubber gasket, beading, anodised aluminium snap beading, screws, anodised aluminium fittings such as butt hinges/Pivot hinges 100 mm long (3 Nos.), handle (2 no.), Lock 06 Lever and locking arrangement ,fixing 5.00 mm thick glass with necessary rubber beading gasket etc including necessary plaster, painting ,cill and making good to disturbed portion all as specified and directed. Please Enable Macros to View BoQ information |
