|
| 1 | CONSTRUCTION WORK FOR VEGETABLES COLLECTIONS CENTER SHED 81.66 Sq.meter Area |
| 2 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, Including removing the excavated material upto a distance of 50m. beyond the building are a and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary backfilling, ramming, watering including shoring and strutting etc. complete. (Lift up to 1.50m) By Manual Means |
| 3 | Excavation for foundation in hard murum including removing the excavated material upto distance of 50metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary backfilling, ramming, watering including shoring and strutting etc.complete. (Lift up to 1.50m) By Manual Means |
| 4 | Providing and laying Cast in situ Ready Mix cement concrete in M-10 of trap/ granitel quartzitel gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting. roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand/Crushed sand VSI Grade finely washed etc).. |
| 5 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/granite/quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering, formwork cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand/Crushed sand VSI Grade finely washed etc |
| 6 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/granite/quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks compacting and roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel) with fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand/Crushed sand VSI Grade finely washed etc) |
| 7 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite/quartzite/gneiss metal for R.C.C. beams and lintels as per detailed designs and /drawings or as directed including steel centering. formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc).... |
| 8 | Providing and casting in situ cement concrete M-20 of trap/Granite/quartzite/ gneiss metal for R.C.C. slabs and landings canopy as per detailed designs and drawings including centering, formwork, cover blocks compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel). With fully automatic micro processor based PLC without SCADA enabled reversible drum type concrete mixer With natural sand. |
| 9 | Providing and laying Polished Shahabad Stone flooring 25mm to 30mm thick and required width wide in plain/diamond pattern on a bed of 1:6 C.M including cement float, filling joints,with neat cement slurry,curing,polishing and cleaning etc.complete. |
| 10 | Providing and fixing in position TMT - FE-500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, linteis pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules, including cutting, bending, hooking the bass, binding with wires or tack welding and supporting as required complete |
| 11 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually, striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete. |
| 12 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete |
| 13 | Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15cm, to 20cm, including watering and compaction etc. complete..... |
| 14 | Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed, sand/grit, ramming, watering etc. Complete |
| 15 | Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.. |
| 16 | Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete..... |
| 17 | Providing & applying washable oil-bound distemper of approved colour and shade to old & new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete..... |
| 18 | Providing and applying three coats of water proof cement paint of approved manufacture and of approved colour to old plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete |
| 19 | Providing structural steel work in trusses ,other similar trussed purlins and members with allbracing gusset plates etc as per detailed designs and drawings or as directed including cutting fabricating,hoisting erecting ,fixing in position,Making riveted/bolted welded connection and one coat of anticorrosive paint and over it 2 coats of oil painting approved quality and shade etc complete. |
| 20 | Providing and fixing colour coated Zincalume (R) AZ150 min 150 gms/sq.mt. Total on each side) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness (BMT) (0.5 mm TCT), Hi-strength steel with min. 550 Mpa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) váth COLORBOND (R) steel quality with thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 coat on back surface. Profile sheet shall have nom. 950-1050 mm width and nominal 25-30 mm deep ribs with subtle square fiuting in shall be designed for anti-capillary groove. & return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. Fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. Complete...(weight of profile 4.52kg/sqm)(As directed by enginner in vharge) |
| 21 | Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angie section fitted with Sliding bolts and handles for both sides, deep M. S. channel section of respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 6248-1979) (Without mechanical gear)... |
| 22 | Providing and fixing steel frame of angle 40x40x5 mm size for windows with 16mm dia.mild steel bars horizontally at 10cmc/c for ventilator portion and 15cmc /c for remaining portion with M.S. flat of size 40x6 mm vertical at center including iron hold fast boxes for fixing 40x6 mm vertical at center including welding finishing painting etc. complete. |
| 23 | Providing and fixing in position. (as perl.S.1868/1982) Aluminium sliding window of two tracks with rectangular pipe having over all dimension ?63.50 x38.10 x1.02 mm at weight 0.547 Kilogram/One Running Metre, and window frame bottom track section 61.85 x31.75 x1.20 mm at weight 0.695 Kilogram / One Running Metre. Top and side track section 61.85x31.75x1,30 mm at weight 0.659 Kilogram/One Running Metre. The shutter should be of bearing bottom 40x18x1.25 mm at weight 0.417 Kilogram/One Running Metre. Inter locking section 40x18x1.10 mm at weight 0.469 Kilogram/One Running 0.417 Kilogram/One Running Metre, and top section 40x18x1.25 mm at weight 0.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5mm thick plain glass with all required screws and nuts etc, complete. With powder coating without box. |
| 24 | Royality |
| 25 | Rubble and Murum |
| 26 | LAB Testing |
| 27 | Cement Fineness, Standard consistency,Setting Time (Initial and Final),Compressive Strength, Soundness. |
| 28 | Concrete M-20 grade i) mix design with all test on basic material |
| 29 | Concrete M-20 grade ii )Concrete Cube Compressive Strength( set of 3 cubes) |
| 30 | Crushed Metal for concrete i water absorption specific gravity impact value crushing value |
| 31 | Brick Crushing Value water absorption specific gravity |
| 32 | TMT STEEL BAR : Tensile Strength ,Yield stress,Ultimate Tensile Stress %elongation weight per running meter, Bend Rebend Test (set of 3 Bars) |
| 33 | Sand:Fineness Modulus,Silt and Clay Content |
| 34 | Murum in Plinth i)Plasticity Index |
| 35 | ESHS Plan Please Enable Macros to View BoQ information |
