|
| 1 | Supplying and drawing following size of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel / PVC conduit as required. |
| 2 | 3 x 4 sqmm |
| 3 | Supply and fixing of following sizes of medium class PVC conduit along with accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required. |
| 4 | Supply and fixing of following sizes of steel conduit along with accessories in surface / recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. |
| 5 | Supply and fixing following sizes / modules, GI box along with modular base and cover plate for modular switches in recess etc. as required. |
| 6 | 8 Module (125mm x 125mm) |
| 7 | Supplying and fixing following piano type switch / socket on the existing box / cover including connections etc. as required. |
| 8 | 6 Pin 15/16 amp socket outlet |
| 9 | 15/16 amp switch |
| 10 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface / recess, complete with tinned copper busbar, earth bar, din bar, interconnections, powder painted including earthing etc. as required (But without MCB / RCCB / Isolator) |
| 11 | Single pole |
| 12 | Supplying, installation, testing and commissioning of CAT6 Copper Information Outlet (IO) with face place of color as per site requirement, should have ETL/UL verification program certificate for compliance with ANSI/TIA - 568.2-D. All copper cable and components should be from same OEM to maintain compatibility and interoperability etc. complete as required. |
| 13 | Supplying, Installation, Testing and commissioning of RJ45 connector for CAT6/6A cables. RJ45 modular plug supports 4 twisted pairs, 8 positions, 8 connectors, Housing: PC, UL94V-2, tramsparent color, Use for 24-26 SWG standard wires etc. complete as required. |
| 14 | Supplying, drawing, testing and commissioning of CAT 6A UTP 4 pair, 23 SWG solid copper cable in existing conduit / on surface, U/FTP, LSZH, Non Plenum, Horizontal )solid) cable suitable for high speed data networking application supporting upto 10 Gbps over a 100 meter channel. The 4 unshielded twisted pairs (UTP) cable with color coded insulation for easy indentification should have FLAME PROPERTIES i.e. Flammability Test - IEC 60332-1, smoke Density - IEC 61034, LSZH standards compliance: ANSI / TIA 568 C.2, ISO/IEC 11801, IEEE 802.3an, RoHS. Delay skew should be <45NS. The outer cable diameter should be 7.5 +2mm. Cable should have been tested and verified by UL/ETL etc. complete as required. |
| 15 | 3 Run of cable |
| 16 | Supplying, installation, testing and commissioning of following CAT6 Patch Cord should have ETL/UL verification program certificate for compliance with ANSI / TIA-568.2-D etc. complete as required. |
| 17 | Copper Patch Cord of length 1m (3ft) |
| 18 | Supplying, installation, testing and commissioning of 24 port CAT6 Patch Panel loaded. Must be of 1U height with clear label holders and white label with the panel. 24 Ports Cat-6 Patch Panel should have ETL/UL verification program certificate for compliance with ANSI / TIA-568.2-D etc. complete as required. |
| 19 | Supplying and fixing of following size wall mount rack having fixed structure with 0.8mm CRCA Sheet, completely knocked-down condition (CKD) shape, vertical mounting rail 1.6mm with 'U' Marking, minimum 2 cable entry / exit provision at Top and bottom with rubber protection, Front 5mm toughened glass with lock, wall mounting kit, powder coated color - RAL - 7035, complied with UL & RoHS, 2x6 sockets 16A power distribution units, 3 numbers closed cable organizer, Hardware mounting screws packet of 20 x 1 number etc. complete as required. |
| 20 | 9U Rack |
| 21 | SITC of PVC junction boxes (150mm x 110 x 170mm) (concealed /surface) complete with connectors, cover and fixing accessories as required. Please Enable Macros to View BoQ information |
