|
| 1 | Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concretebut excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 2 | Material and labour for brick work with sub class 'B' brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 3 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed. |
| 4 | Material and labour for 15 mm thick rendering on brick work or concrete surface in cement mortar 1:6, surface finished even and smooth (without using extra cement) complete all as specified and directed. |
| 5 | Material and labour for 15 mm thick rendering on brick work or concrete surface in cement mortar 1:4 with WPC @ 3% by weight of cement surface finished even and smooth complete all as specified and directed.Note : WPC will be paid separately. |
| 6 | Supply only water proofing compound complete all as specified and directed. |
| 7 | Material and labour for 10 mm thick rendering on celing surface in cement mortar 1:3 mixed surface finished even and smooth complete all as specified and directed. |
| 8 | Material and labour for preparation of newly plastered surface of walls including corners and applying two coats of OBD over applying of 1-2 mm thick wall care putty finish wall surface even & smooth complete all as specified and directed. |
| 9 | Material and labour for two coats of smartcare damp proof advanced of approved colour consist of fiber reinforced elastomeric liquid applied waterproofing membrane, formulated with select elastomeric and resilient acrylic polymers and reinforcing synthetic fiber which forms a thick, seamless, durable membrane upon curing and offers ultimate waterproofing inlcluding preparation of surfaces to receive the coats as per manufacturer directions all as specified and directed. Make:- Asian Paints Product Coden 5457 or equivelent. |
| 10 | Material and labour for preparation of newly plastered surface on ceilings and applying two coats of distemper oil emulsion on ceiling, off sets, pillar etc. over applying of 1-2 mm thick wall care putty finish wall surface even & smooth complete all as specified and directed. |
| 11 | Material and labour for complete removal of existing treatment of walls including corners and applying two coats of distemper oil emulsion over applying of 1-2 mm thick wall care putty finish wall surface even & smooth complete all as specified and directed. |
| 12 | Material and labour for complete removal of existing treatment and preparation of old plastered surface of walls including corners to receive the coats as per manufacturer directions and applying two coats of SmartCare Damp Proof Advanced of approved colour consist of fiber reinforced elastomeric liquid applied waterproofing membrane, foRunning metreulated with select elastomeric and resilient acrylic polymers and reinforcing synthetic fiber which forms a thick, seamless, durable membrane upon curing and offers ultimate waterproofing inlcluding preparation of surfaces to receive the coats as per manufacturer directions all as specified and directed. Make:- Asian Paints Product Coden 5457 or equivelent. |
| 13 | Material and labour for preparation of old plastered surface of ceiling and applying one coat of OBD on ceiling, off sets, pillar etc. complete all as specified and directed. |
| 14 | Material and labour for applying two coats of synthetic enamel paint on new or previously untreated steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of steel surfaces complete all as specified and directed. |
| 15 | Material and labour for Vitrified Ceramic tiles light shade 7-8 mm thick (square/rectangular) polished area of each tiles exceeding 0.36 Sqm but not exceeding 0.72 Square metre in floor etc. over and including screed bed 15 mm thick in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile including dismantling of existing tiling complete all as specified and directed. |
| 16 | Description all as per item here in above but as in skirting and including 10 mm thick rendering in cement mortar 1:4 complete all as directed and specified. |
| 17 | Material and labour for non-skid / mat finish designed coloured joint free ceramic tiles of size not less than 400 mm x 400 mm x 6-7 mm thick in floor, set and jointed in neat cement slurry @ 3.00 Kg/Sqm and pointed in coloured cement to match over and including 15 mm thick screed in cement mortar 1:6 and dismantling of existing tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed. |
| 18 | Description all as per item No 17 above but as in skirting and including 10 mm thick rendering in cement mortar 1:4, complete all as directed and specified and directed. |
| 19 | Material and labour glazed ceramic colour tiles size 300 mm x 450 mm x 6-7 mm thick on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry @ 3.00 Kg/Sqm and pointed in coloured cement to match over and including 10 mm thick rendering in cement mortar 1:4 and dismantling of existing wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as directed and specified. |
| 20 | Dismantling of stone slabs and tiles laid, bedded in any mortar of any description or thickness in floors, aprons etc complete all as specified and directed. |
| 21 | Material and labour for 15-18 mm thick Granite, of any type, table rubbed and polished in steps, jambs, pillars, window- cills, cooking platfoform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including moulding complete all as specified and directed. |
| 22 | Material and labour for Machine cut pre polished Kota stone slab 18-20mm thick as in floor/ treads of steps (single piece)/risers, laid over and including 15mm thick screed in CM 1:4, set & jointed with grey cement slurry @ 3.00 Kg/Sqm and pointed in white cement mixed with pigment to match the shade of the slab including cutting, rubbing complete all as specified and directed. |
| 23 | Taking down chowkhats or frames n.exc 1.50 Square metre with shutters (without taking off shutters from the frames) complete all as specified and directed. |
| 24 | Taking down chowkhats or frames exc 1.50 Square metre but n.exc 4.00 Square metre with shutters (without taking off shutters from the frames) complete all as specified and directed. |
| 25 | Suppy and fix factory made 100 % solid wood plastic composite (WPC) door frame 125x50 mm made from wood plastic composite (single extruded process) material with density 780 Kilogram/Cubic metre from ISO certified company door should be water proof, termite proof, fire retardant and having good screw holding capacity all as per specification and drawing complete all as specified and directed. |
| 26 | Suppy and fix factory made 100 % solid wood plastic composite (WPC) door frame 105x60 mm made from wood plastic composite (single extruded process) material with density 780 Kilogram/Cubic metre from ISO certified company door should be water proof, termite proof, fire retardant and having good screw holding capacity all as per specification and drawing complete all as specified and directed. |
| 27 | Supply and fixing 30 mm thick WPC factory made 100% solid designer flush door (confoRunning metreing as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side plain with density not less than 600 Kilogram/Cubic metre. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire etardant and having screw holding capacity complete all as specified and directed. |
| 28 | Suppy and fix 30 mm thick moulded WPC factory made Glazed and skeleton shutter (confoRunning metreing as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side plain with density not less than 600 Kilogram/Cubic metre. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire etardant and having screw holding capacity complete all as specified and directed. |
| 29 | Suppy and fix stainless steel Butt Hinges medium weight, cold rolled mild steel 100 mm fixed to steel/wooden shutters complete all as specified and directed. |
| 30 | Supply and fixing for stainless steel tower bolts 150 mm size fixed with stainless steel screws complete all as specified and directed. |
| 31 | Supply and fixing for 150 mm size stainless steel handles fixed with stainless steel screws complete all as specified and directed. |
| 32 | Suppy and fix 300 mm long MS Helical door spring welded to steel frame or fixed to wooden door frame with screws including roller and roller plate etc complete all as specified and directed. |
| 33 | Suppy and fix floor door stopper of stainless steel double legged and tongue, 304 grade, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm complete all as specified and directed. |
| 34 | Supply and fixing aluminium body door cill at bottom part of door to stop entry of insect inside the room complete all as specified and as directed. |
| 35 | Suppy and fix stainless steel sliding door bolts 204 grade, hasp and staple type with bright bolt not less than 12mm dia with and incl a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed 250mm long complete all as specified and directed. |
| 36 | Supply and fixing for powder coated aluminium standard hollow section as mentioned below window frame (Bombay sliding) with two glazed shutter and one nos stainless steel wire gauged shutter sliding type, 3 track numbers for sliding windows, and glazed with glass 4mm thick & including glazing clips, rubber beading / gasket anodised beading, screw and lock type handle of size 75mm, 2 Nos aluminum including locking system and provision of space for AC etc complete all as specified and directed.Size of Track-both top & bottom (Verticles sides):- 100 x 44 x 1 mmSize of Shutter Frame:- 25 x 12 x 1 mmNote: Iron grill with frame to be fixed with window (measured and paid separately) |
| 37 | Supply and fixing for powder coated Aluminium partition (Fixed) made out of aluminium powder coated section 44 x 44 x 1 mm including 4 mm thick glass/ACP Sheet complete with rubber packing/aluminum beading etc, complete all as specified and directed. Note: Iron grill with frame to be fixed with window (measured and paid separately) |
| 38 | Suppy and fix for mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; staircase; walk ways; railings; framework of water tanks and similar work con- foRunning metreing to Fe.290.Gde-E-165 including necessary welding, drilling hole complete all as specified and directed. |
| 39 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 40 | Suppy and fix steel work in angle/tubular section for stair case, railing at balconies, roof truss etc including special shaped washer etc complete using ERW or induction butt welded tubes confoRunning metreing to IS 1161-179 grade St-240 complete all as specified and directed. |
| 41 | Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings etc, complete all as specified and directed. |
| 42 | Suppy and fix for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 43 | Suppy and fix for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 44 | Suppy and fix Stainless steel 304 grade wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples with 8% nickle complete all as specified and directed. |
| 45 | Dismantling block board/ boarding of any description and in any position complete including iron mongries ,complete all as specified. |
| 46 | Supply & fix 18 mm thick PVC board one side prelaminated and other side plain white colour as in cup board shutters and frames, kitchen cabinet front shutter, partion, shelf, & drawer, fixed with screws, solvent cement / adhesive complete all as specified and directed. |
| 47 | Supply & fix 18 mm thick PVC board both side plain white colour as in cup board shutters and frames, kitchen cabinet front shutter, partion, shelf, & drawer, fixed with screws, solvent cement / adhesive complete all as specified and directed |
| 48 | Supply & fix 6 mm thick PVC board both side plain white colour as in cub board selves etc fixed with screws, salvent cement/ adhessive , complete all as per specifications & directed. |
| 49 | Supply & fix Continuous (Piano) hinges, mild steel, bright finished or stainless steel 304 grade, width of flaps (When open) 30 mm complete all as specified and directed. |
| 50 | Suppy and fix magnet catcher for cub board with brass body and striking plate including letting in and fixed complete all as specified and directed. |
| 51 | Suppy and fix in repair 25 mm dia stainless steel polished 204 grade drapery rod 1mm thick with final decorative, including brackets, decorative finished at both ends complete all as speccified and directed as per approved sample complete all as specified and directed. |
| 52 | Suppy and fix medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 15 mm bore GI tubing including dismantling of old tubing complete all as specified and directed. |
| 53 | Material and labour for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth ,complete all as specified and directed. |
| 54 | Suppy and fix medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 20 mm bore GI tubing including dismantling of old tubing complete all as specified and directed. |
| 55 | Material and labour for demolition of existing sunken portion(n.exc 2.0 Square metre) & taking down of existing sunken slab treatment from the sunken portion and cleaning the surfaces washing down with water and rubbish off the premises, cleaning and filling cracks with sealing compound, brushing neat cement slurry @ 3.00 Kilogram/Square metre and grouting 25mm thick cement concrete type B-0 (1:2:4) (using 12.5 mm graded stone aggregate) on sunken slab portion and finishing the top surfaces even and smooth without using extra cement. (b) Material & labour for two coat of acrylic cementitious water proofing coating (Dr. FIXIT pidifin 2K manufactured by M/S Piditite Industries Ltd or equivalant) and followed by a overlay protective screed 15mm thick CM(1:3) alongwith liquid water proofing compound approved make on top surfaces of sunken slab after preparation as mentioned above method of application for acrylic cementitious water proofing coating is followed as per manufacturers instructions complete all as specified and as directed. |
| 56 | Suppy and fix in repair vitreous china squatting pan (orissa pattern) long pan size 580x440mm white with integral footrest with cast iron spun 600 mm long 'P' trap (SI 3989 1984), set in cement concrete type B-1 (1:2:4) complete (excluding flushing cistern and flush pipe) complete all as specified and directed. |
| 57 | Supply and fix in repair 10 litre capacity PVC low level cistern ‘ white’ with inlet, float valve including brackets with 32 mm dia PVC pipe/bend 600 mm long complete all as specified and directed. |
| 58 | Suppy and fix in repair vitreous china wash hand basin including brackets, white size 550 x 400 mm including cutting for and pinning in ends of brackets, including Waste fittings, brass, chromium plated with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed complete all as specified and directed. |
| 59 | Suppy and fix in repair pillar taps, swan neck type, 15mm bore cast copper alloy with capstan heads, chromium plated, screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts, screwed to iron pipe & fixed complete all as specified and directed. |
| 60 | Suppy and fix in repairs 600mmx450mm bevelled edge looking mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 61 | Supply & fix wall mixer with over head shower chromium plated for mixing hot and cold water screwed for iron pipe suitable for 15 mm bore pipes complete all as specified and directed . |
| 62 | Suppy and fix in repairs CP brass bib tap 15mm bore screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 63 | Suppy and fix in repairs CP stop/angle cock fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 64 | Suppy and fix in repair CP brass shower rose 15mm dia,100mm dia complete all as specified and directed. |
| 65 | Suppy and fix in repairs PVC connection 15mm size with PTMT nuts, of 450 mm long complete all as specified and directed. |
| 66 | Suppy and fix in repairs 20mm dia brass chromium plated tubular towel rails, D type, 60cm long between flanges, complete all as specified and directed. |
| 67 | Suppy and fix in repairs Soap dish 6 inches, fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 68 | Suppy and fix in repair sink/waste coupling 32mm dia PTMT half or full threaded complete all as specified and directed. |
| 69 | Suppy and fix in repair CP steel Grating round 100mm dia all complete all as specified and directed. |
| 70 | Suppy and fix in repairs 32mm bore heavy duty waste pipe not less than 60cm long with PVC coupler for kitchen sink, WHB, urinal, etc complete all as specified and directed. |
| 71 | Suppy and fix in repair plate rack 300mm and size 100 x 80 cm made out of 1.00 mm thick stainless steel complete all as specified and as directed. |
| 72 | Suppy and fix in repairs stainless steel kitchen sinks without draining board ISI marked made of stainless steel 1 mm thick, with plugs, washers and wastes, including bedding lime cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe bowl size overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed. |
| 73 | Demolition of reinforced cement concrete as in shelves, chajjas, slabs and similar work carefully and matching to adjoining disturbed surfaces, complete all as specified and directed. |
| 74 | Material and labour for RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in slabs supported on walls, beams and colums, in floors, roofs, landing balconies, canopies, deck slabs, chajja and in shelves and the like including demolition of old RCC, complete all as specified and directed. |
| 75 | Material and labour for use waste of form work to soffits of suspended slabs such as roof slabs, floor slabs, landings, chajja and similar work, not exc 200mm thick (Horizontal or sloping) for fair finished flat surfaces of concrete complete all as specified and directed. |
| 76 | Material and labour for TMT mild steel bar 10 mm dia & over, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire ( annealed) not less than 0.9 mm dia as specified . |
| 77 | Material and labour for PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in cills, copings, benching on chajjas, roof kerbs, bed blocks and the like including weathering, slightly rounded or chamfered angles and throating as directed with and including necessary form work complete all as specified and directed. |
| 78 | Taking down CI/AC/PVC pipes incl fittings upto 110mm dia and removing from site complete all as specified and directed. |
| 79 | Suppy and fix PVC (SWR) pipes of 110 mm dia, single socketed fixed to walls or laid in trenches or floors complete all as specified and directed. |
| 80 | Suppy and fix PVC (SWR) pipes of 75 mm dia, single socketed fixed to walls or laid in trenches or floors complete all as specified and directed. |
| 81 | Suppy and fix PVC (SWR) bends of 110 mm dia, any radius complete all as specified and directed. |
| 82 | Suppy and fix PVC (SWR) bends of 75 mm dia, any radius complete all as specified and directed. |
| 83 | Suppy and fix PVC (SWR) junction single Tee equal or unequal 110 mm dia complete all as specified and directed. |
| 84 | Suppy and fix PVC (SWR) junction single Tee equal or unequal 75 mm dia complete all as specified and directed. |
| 85 | Suppy and fix PVC in repair floor trap of 75mm bore, with grating including jointing to waste pipe with solvent fixed in cement concrete type B1 (1:2:4) complete all as specified and directed. |
| 86 | Suppy and fix in repairs for 75mm bore dia pipe Stack clamps out of 35mm by 5mm flat iron & 16mm dia round iron stays, including bolts & nuts & securing ends of stay to wall or roof complete all as specified and directed. |
| 87 | Suppy and fix in repairs for 110mm bore dia pipe Stack clamps out of 35mm by 5mm flat iron & 16mm dia round iron stays, including bolts & nuts & securing ends of stay to wall or roof complete all as specified and directed. |
| 88 | Material and labour for 75mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection or similar work/places, laid in alternate bays and filling the joints with & including bitumen and sand 1:3 by weight, surface finished even and fair without using extra cement and demolition of existing old cement concrete of plinth protection in ground floor and paving below or above ground level complete all as specified and directed. |
| 89 | Supply and fix rotational moulded polyethylene water storage tanks of capacity 500 litres tripple layer, not less than 18 Killogram (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including dismantling of existing unserviceable tank and removing from site, including 20mm bore ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball complete all as specified and directed. |
| 90 | Suppy and fix in repairs Gun metal gate valve iron wheel head screwed both ends for iron pipe of 20 mm bore complete all as specified and directed. |
| 91 | Suppy and fix in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long , complete all as specified and directed. |
| 92 | Taking out & removing existing roof treatment of any description completely upto mother roof slab including racking out joints, hacking for key,sweeping clean and scrubbing down with water etc to remove dust etc,complete all as specified and directed. |
| 93 | Material & labour for surface preparation of roof and treating of joints, filling of honey combs and providing 25 mm thick PCC (1:2:4) type B-0 with WPC @ 3% by weight of cement over roof surface complete all as specified and directed. Note : WPC will be paid separately Please Enable Macros to View BoQ information |
| 94 | Material & labour for surface preparation of roof and treating of joints, filling of honey combs and providing 25 mm thick PCC (1:2:4) type B-0 with WPC @ 3% by weight of cement over roof surface complete all as specified and directed. Note : WPC will be paid separately Please Enable Macros to View BoQ information |
