Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: COMMANDER WORKS ENGINEER BAREILLY Name of Work: SPL REPAIRS/ REPLACEMENT OF ASBESTOS ROOF SHEET, PLASTER AND CONNECTED WORKS IN BLDG NO P-53, P-85 AND P-38 MCO BAREILLY, P-36 RWA OFFICE, T-08, T-89 AND 101 (MESS) ASRI AT BAREILLY UNDER GE (WEST) BAREILLY Contract No : CWE / BLY / GE(W) /20 OF 2026-27 Bidder Name : SCHEDULE A(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Dismantling of Asbestos cement corrugated or semi corrugated etc sheets in roof covering complete all as specified and directed. |
| 3 | S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/clading to wall, fixed with self tapping screws complete all as specified and directed. |
| 4 | S&F pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in ridges, roof covering/clading to wall, fixed with self tapping screws complete all as specified and directed. |
| 5 | Dismantling fillets, rails, post, rafters, purlins, etc under 40 cm in section in any position unframed work. complete all as specified and directed. |
| 6 | Dismantling timber scantlings 40 sqcm & over in section , in any position unframed work/ truss etc complete all as specified and directed. |
| 7 | S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed. |
| 8 | S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, wind tie etc complete all as specified and directed. |
| 9 | S&F in repairs 4mm thick E-Board tiles for insulation and acoustic purpose of size 600x 600mm fixed with and including anodised GI prepainted snap grid with 25mmx25mmx1.5 mm thick Tee section and 38mmx25mmx2 mm thick angle with hanging/supporting arrangements as in false ceiling at bottom at spacing 60 cm centre to centre including necessary GI cleats and 4mm dia GI wire as suspender fixed to ceiling not exceeding 1.20 mtr centre both ways with dash fastners complete and making good disturbed surfaces complete all as specified and directed. |
| 10 | M&L for vitrified double charged coloured ceramic tiles light shade 8-10mm thick (square/rectangular) polished, area of each tiles exc 0.42 sqm and not exc 1.00 sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement and with 15mm thick screed bed 1:6 cement motar complete all as specified and directed. |
| 11 | All as per serial item as above but as in vertical surfaces including dismantling of tiles and rendering 10 mm thick in cement mortar 1:4, as in backing layer complete all as specified and directed. |
| 12 | M&L for non- skid ceremic coloured tiles 8 to 10 mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm (400mmx400mm) in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match screed bed or bedding layer of mortar 15mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed. |
| 13 | M&L for colour glazed ceremic coloured tiles in vertical surface 300mmx600mm x 7-8 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick screed bed or bedding layer of cement mortar 1:4 cement and dismantling of wall tile including cement mortar bedding complete all as specified and directed. |
| 14 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons Laid, bedded and pointed in any mortar etc as specified and directed. |
| 15 | M&L for 18-20 mm thick granite (of any type and shade/ Z-Black colour) work (table rubbed and polished) in floors, steps, jambs, pillars, window cills, cooking plateforms and like in CM 1:4 incl pointing in white cement(1:2) using marble dust with admixture of pigment to match the shade of granite stone including grinding and polishing, moulding of edges complete over and incl 20 mm thick screed bed or bedding layer of mortar in cement mortar 1:4 complete incuding hole for gas pipe all as spd and directed. |
| 16 | Demolition of brick work or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, aches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles all as spd and directed |
| 17 | M&L for Brickwork old size with subclass ‘B’ bricks, except brick straight or curved on plan exc 6m mean radius built in in CM (1:6) complete all as specified and directed. |
| 18 | M&L for Brick work with fly ash bricks ,old size brick straight or curved on plan exceeding 6 M mean radius built in CM 1:6 complete all as specified and directed |
| 19 | M&L for brick work with fly ash bricks straight or curved on plan to any radius in half brick thick walls built in cm (1:4) complete all as specified and directed. |
| 20 | Taking down cement plaster from wall of any description including terrazzo tiles, skirting/dado on brick or stone walls etc including raking out joints, hacking for key and scrubbing down with water etc.all as specified and directed. |
| 21 | M&L for 15mm thick cement plaster on brick other than fair surfaces or concrete surfaces in CM 1:4 using WPC as per manufecturer instruction of cement including finishing the surface even and smooth without using extra cement complete all as specified and directed.Note :- WPC shall be paid separately for this item. |
| 22 | M&L for 12mm thick cement plaster on brick surfaces or concrete surfaces in cm 1:6 on other than fare face complete complete all as specified and directed. |
| 23 | Supply only liquid waterproofing compound all as specified. |
| 24 | M&L for applying two layer of wall care putty min 1.00mm thick on wall or ceiling surfaces incl rubbing down the surfaces with sand paper after getting dried all as directed to obtain a smooth & even surface complete all as spd and directed. |
| 25 | M&L for applying two coat of distemper oil emulsion white or tinted on newly decorated or undecorated wall surface including preparation of surfaces by washing rubbing down and stoping of any surfaces of walls complete all as specified and directed. |
| 26 | M&L for applying two coat of distemper oil emulsion white or tinted on old decorated or undecorated wall surface including preparation of surfaces by washing rubbing down and stoping of old distempered and painted surfaces complete all as specified and directed. |
| 27 | M&L for applying two coat of cement based paint on old decorated or undecorated wall, roof surface including preparation of surfaces by washing rubbing down and stoping of old wall surfaces complete all as specified and directed. |
| 28 | M&L for white washing two coats on wall surfaces including preparation of newly plastered untreated surfaces and necessary scaffolding all as spd and directed |
| 29 | M&L for prepration of newly plastred surfaces of wall and applying two coat of cement base paint complete all as specified and directed. |
| 30 | M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfacescomplete all as specified and directed. |
| 31 | M&L for plain cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregate) as in plinth protection 75 mm thick finished even and fair including forming 10 mm wide joints at not exceeding 3 m distance between adjoining slabs shall not exceed 10 mm in thickness and shall be filled with bitumen mastic i.e. bitumen and sand in proportion 1:2 all as specified or as directed. |
| 32 | Taking down of chowkats of frames n.exc 1.5 Sqm each with shutters (without taking of shutters from the frames) complete all as specified and directed. |
| 33 | Taking down of chowkats of frames exc 1.5 Sqm but n exc 4 sqm each with shutters (without taking of shutters from the frames) complete all as specified |
| 34 | Taking down shutters of any description n exceeding 1 Sqm each complete all as specified and directed. |
| 35 | Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and directed. |
| 36 | M&L for second class hard wood for segmental, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed |
| 37 | S&F 125mmx60mmx1.25mm thick pressed steel, frames for door with one or more rebates including filing and inner surface of the frame shall be treated with a coat of bituminous paint & compaction with PCC 1:3:6 Type C1, necessary fixing lugs, SS hinges, lock strike plate, 02 x MS bar/flat at bottom of the frame etc, complete including wooden texture finished paint on the frame surface all as specified and directed. |
| 38 | S&F 105mmx60mmx1.25mm thick pressed steel, frames for door with one or more rebates including filing and inner surface of the frame shall be treated with a coat of bituminous paint & compaction with PCC 1:3:6 Type C1 necessary fixing lugs, SS hinges,lock strike plate, 02 x MS bar/flat at bottom of the frameetc, including wooden texture finished paint on the frame surfacecomplete all as spd and directed. |
| 39 | M&L for 35 mm thick Factory made flush shutter, solid core construction with block board core and ply wood face panels, commercial type on both side, complete all as specsified & directed. |
| 40 | M&L for 35mm thick Factory made plain framed glazed/gauge and skeleton shutter open rebated & prepared to receive glass, gauge etc, with sash bar edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass including campsule mesh tightly fixed with the glazed and skelton door shutter etc, of 2nd class hard wood, members of shutters as specified in SSR Part - I Section 8 clause 8.24 (a) fitted to chowkats all as specified and directed. Note:- Campsule Mess will be measured and paid separately. |
| 41 | M&L for 30mm thick Factory made plain framed glazed/gauge and skeleton shutter open rebated & prepared to receive glass, gauge etc, with sash bar edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass including campsule mesh tightly fixed with the glazed and skelton door shutter etc, of 2nd class hard wood, members of shutters as specified in SSR Part - I Section 8 clause 8.24 (a) fitted to chowkats all as specified and directed. Note:- Campsule Mess will be measured and paid separately. |
| 42 | S&F Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. complete as specified by the manufacturer and as per directions of Engineer-in-charge. |
| 43 | S&F 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table 3 of IS: 14856 complete all as specified by the manufacturer and as per directions of Engineer- in-charge. |
| 44 | S&F 100mm long stainless steel butt hinges complete all as specified and directed. |
| 45 | S&F 150mm long aluminum handles, cast type complete all as specified and directed. |
| 46 | S&F 150mm long aluminum anodised, barrel tower bolts of extruded section and fixed. |
| 47 | S&F 200mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or castall as spd and directed. |
| 48 | S&F 150 mm long floor door stopper of aluminium alloy body and tongue, brass body and tongue with hard drawn steel spring fixed in floor complete all as specified and directed. |
| 49 | M&L for painting to wood and wood based surfaces of any description exc. 10 cm width or girth with two coats of synthetic enamel paint over a coat of pink primer including prepration of new surfaces all as specified or as directed. |
| 50 | M&L for painting to steel surface exc 10 cm width or girth with two coats of synethic enamel paint over a coat of red oxide primer including preparation of newly pained surface all as spd and directed |
| 51 | S&F in repairs 300 mm size, MS ordinary rat tail rod pattern springs including roller and roller plate if fixed to chowkats with flat iron 40mmx3mm size 75cm long with necessary bolts, etc complete all as specified and directed. |
| 52 | S&F Mild steel bands, straps, supports or stay, for rain water, ventilating pipes including bolts if reqd, hooks (stay) heavy for large gates hook and pintle large hasps and staple, chains hand made sliding bolts clamps, hold fasts wall ties etc etc hooks for hanging fans plain angle cleats for securing purlins to wood truss or rafter, knee piece inserts, two way and three way straps, plate washer and similar small articles confirming to Fe-290 Gde - E-165 complete all as specified and directed. |
| 53 | S&F powder coated aluminium frame for windows, ventilators and kitchen cupboards frame size 100mmx44mm and 2mm thick or requisiste size approved by accepting officer with one or more rebates including joining cleat for fixing etc and add for powder coating (minimum thickness of powder coating 50 micron) complete all as specified and directed. |
| 54 | S&F powder coated aluminium Door, window, partiton and ventilator shutters, side hung /fixed or patial openable type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays , hinges type B-21 suitable handle each shutter complete all as specified and directed.Note : Cost of rubber beading and required accessories shall be included in the rate of item and will not be paid extra. |
| 55 | S&F sheet glass 5.0mm thick selected quality and glazing with oil putty or necessary aluminium beading in square n exc 0.5 Sqm each pane complete all as spd & directed |
| 56 | S&F Powder coated aluminium sliding windows frame with movable shutter ( sliding on minimum two PVC roller of best quality, for each shutter on three tracks with stainless steel mosquito proofing and glazing shutter and incl 5.00 mm thick glass & stainless steel wire mesh fixed with neoprene rubber gasket with aluminium beading, clips,frame made with aluminium section as appended below- (i) Window frame :68.4mmx38mm X 1.15 mm thick for three tracks.(ii) Top/bottom rail and style / rail of shutter : 15mmx37.5mmx1.15 mm thick and over. (iii) Aluminium beading - 0.7mm thick (iv) stainless steel wire cloth 0.45mm nominal dia of wire and average width of aperature 1.40mm and fixed in aluminium window or alongwith F/Y section fixed with aluminium wire staples complete. v) Aluminium fittings such aluminium suitable handle with auto interlock cap with suitable size (vi) Making good of wall surfaces with silicon to match with existing surfaces complete all as specified Note : Rates of wiremesh and glasses and other necessary fittings are inclusive in the above rates. |
| 57 | M&L Aluminium partition frame work anodized powder coated frame of size 62.5 mm x 37 mm x 2.00mm thick with bottom & middle rail of section 62.50 mm x 37 mm x 2.0 mm thick and styles, top rail of section 62.50 x 37 x1.50 mm thick including jointing cleats, fixing of glazing with 5.0 thick ordinary plain/tinted glass or 5 mm aluminium composit panel including necessary fittings fixtures complete |
| 58 | S&F aluminium extruded section body Door closer hydralically regulated,designation No. 3,universal type, suitablebfor door shutters of 851 to 1000 mm in widthand of weight between 61 to 80 kg and fixed complete all as spd & directed |
| 59 | S&Fixed Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as spd & directed |
| 60 | S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18 mm all as spd and directed |
| 61 | S&F steel ventilators with top fixed type, with glazing bars complete welded including one shop coat of Red Oxide Zinc chromate primer complete all as specified and directed.(Note :- Glass shall be measured and paid for separately). |
| 62 | S&F of Steel windows with pressed steel frame ( size 95x45x1.25mm) side hung shutter including box type hinges with steel handle, and steel peg steel complete with glazed openable shutter with glazing bar (open out side) and wire gauged openable shutter without glazing bar ( open in side) dovetailed or welded complete all as specified and directed and all as per Drg No TD/088 dt 07 jan 2002 Note:- (i) Two shutter ie wire gauged and glazed shall be fixed in one composite frame and both shutter shall be measured as one unit. (ii) Rate for filling of PCC in frame deemed to be included in quoted rate. (ii) MS grill shall be measured and paid seperatly under relevant item of schedule |
| 63 | S&F mild steel framed work as in window guard bars, grills or forged into spikes, framed balusters, walkway railing etc and similar work including welding complete FE-290 grade E-165 all as specified and directed. |
| 64 | S&F in repairs sheet glass of 4 mm,ordinary quality and glazing with oil putty or wooden beading in squares n.exc 0.5 Sqm in each pane,complete all as specified. |
| 65 | S&F in repairs galvanised mild steel wire cloth 0..56mm nominal dia of wire and average width of aperture 1.18 mm all as spd and directed |
| 66 | S&F 15mm bore galvanised steel water tubing with all fittings 'medium grade' and fixed complete to wall and ceiling or laid in floors including taking down of GI tubing complete all as specified or as directed. |
| 67 | S&F 20mm bore galvanised steel water tubing with all fittings 'medium grade' and fixed complete to wall and ceiling or laid in floors including taking down of GI tubing complete all as specified or as directed. |
| 68 | S&F 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified or as directed. |
| 69 | Dismantling water tanks and removing to store capacity exc 500 and not exc.1000 litres complete all as specified and directed. |
| 70 | S&F 500 ltrs capacity rotational moulded polythylene triple layered water storage tanks white in colour (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed |
| 71 | S&F 15mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gms complete all as specified or as directed. |
| 72 | S&F in repairs Vitreous China flat back size 550mmx400mm wash basin of suitable size including with SS waste coupling complete all as specified and as directed. |
| 73 | S&F in rapair Vitreous chinaware coloured wash hand basin with padestal of size 55mmX40mmX82cm complete including 32mm Waste coupling ,waste pipe ,complete fixing arrangement and cutting for and pinning in walls & making good complete all as specifed and directed. |
| 74 | S&F in repairs Vitreous china wash down water closet EWC white semi-pedestal pattern complete, including connection to drain pipe and to flushing pipe antisyphonage pipe plastic water closet seat back closed pattern with flat bottom cover and mild steel chromium plated or aluminized hinging device, incl. jet connections etc complete all as spd & directed |
| 75 | S&F vitreous china squatting pan of orrissa pattern long pan size 580mm x 440 mm white with \\"P\\"or \\"S\\" trap size 100 mm dia front or back inlet and integral foot rest any pattern (excluding flushing cistern and flush pipe) including provn of lime concrete bedding (1:2:5), minimum 150mm all round and finish just below level of rim of pan complete all as specified and directed. |
| 76 | S&F PVC low level flushing cistern 10 litres, valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, flushing pipe complete all as specified and directed. |
| 77 | S&F fancy type brass chromium plated toilet paper holder, complete all as specified and as directed. |
| 78 | S&F in repairs health faucet 1 mtr SS Braided connection tube with wall hook complete for EWC incl necessary fitting complete all as specified and directed. |
| 79 | S&F in repairs fancy type 150mm size square brass CP shower rose with or without swivel joints complete all as specified and as directed. |
| 80 | S&F brass chromium plated wall mixer 3 in 1, 15mm for mixing hot & cold water screwd down three joints to steel pipes or unions and plugging and screwed to walls incl necessary fitting complete all as specified and as directed. |
| 81 | S&F fancy type 15mm dia chromium plated fancy type wall mixer hot & cold with long swan for kitchen sink fixing and connection to pipes incl necessary fitting complete all as specified and as directed. |
| 82 | S&F brass chromium plated tubular towel ring including a pair of CP brass bracket complete & necessary fitting all as specified and directed. |
| 83 | S&F tubular, towel rail brass chromium plated 25mm dia D type 60 cm long between flanges complete all as specified and directed |
| 84 | S&F fancy type brass chromium plated soap dish of 160mmx160mmx90 mm complete all as specified and directed. |
| 85 | S&F fancy type sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with CP bracket gaurd and railling 60 cm long complete all as specified and directed. |
| 86 | S&F designed looking mirror size 600mmx450mm or area exc 0.54 sqm to 0.75 sqm of selected quality 6mm thick glass, mounted on fixed to wall with CP plugs with chromium plated brass screws and cup washers, complete all as specified and as directed. |
| 87 | S&F fancy type 15 mm bore brass chromium plated WHB mixer for mixing hot and cold water screwed down for iron pipe and fixed to WHB including taking out existing pillar tap from old WHB complete all as specified and directed. |
| 88 | S&F fancy type chromium plated brass angle valve type suitable for 15mm bore pipe complete all as specified and directed. |
| 89 | S&F 15 mm dia bib tap fancy type chromium plated with flange quarter turn incl all necessary fittings complete all as specified and directed. |
| 90 | S&F in repairs 450mm long PVC connection 15mm bore with PTMT nuts specified and directed. |
| 91 | S&F sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mmbowl size 410mm x 330mm x160mm etc complete all as specified and as directed . |
| 92 | S&F stainless steel plate rack not less than 5 Kg of size 31\\"X36\\"X10\\" complete all as specified and as dirrected. |
| 93 | S&F in repairs 100mmx100mm stainless steel grating fixed complete all as specified and directed. |
| 94 | S&F low density polyethene pipes (LDPE) 32mm of pressure rating 6 Kg/cm2 fixed to walls complete all as specified and directed. |
| 95 | S&F in repairs 20 mm dia Stainless Steel fancy type drapery curtain rod with brackets and lattu & other connected accessories etc complete all as specified and directed. |
| 96 | Taking up or down AC/PVC/SWG rain water pipe, soil/waste/vent pipe of any size with fittings etc. complete all as specified and directed. |
| 97 | S&F PVC (SWR) 110 mm dia soil waste or rainwater drainage pipes single socketed in any length with rubber ring joint laid in floor or fixed on wall all as specified or as directed. |
| 98 | S&F PVC (SWR) 110 mm bore bends complete all as specified and directed. |
| 99 | S&F PVC (SWR) 75 mm bore bends complete all as specified and directed. |
| 100 | S&F PVC (SWR) 75 mm dia soil waste or rainwater drainage pipes single socketed in any length with rubber ring joint laid in floor or fixed on wall all as specified or as directed. |
| 101 | S&F PVC (SWR) vent cowl 75 mm dia as specified and directed |
| 102 | PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed. |
| 103 | M&L for PVC (SWR) floor trap/Nahani Trap, dia of outlet 75mm, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 104 | S&F aluminium power coated(colour) section for Cabinet shutter in Kitchen,glazed with aluminium shutter weighting 0.55 kg/m including necessary fitting of suitable size, one or more rebate,cut to jointed together with cadmium plated steel screws including rubber bending or gasket for aluminium sections for fixing glass/Xqm jalli and necessary fittingd,screws, plugs for fixing screws, etc complete all as specified and directed |
| 105 | M&L for 6mm thick bakelite sheet prelaminated both side with decorative choice lamination with aluminium frame work complete all as specified and directed. |
| 106 | Demolition of cement concrete (unrinforced), in ground floor and paving n.exc. 15 cm thickness (below or above ground level) including tile/ terrazzo floor complete all as specified and directed. |
| 107 | M&L for cement concrete type D2 1:4:8 (40 mm graded aggregate) as in foundation filling and mass concrete complete all as specified and directed. |
| 108 | M&L for 25mm thick cement concrete type B1 1:2:4 using 12.5mm graded stone aggregate in floor finishes even and fair to receive floor tiles complete all as specified and directed. |
| 109 | M&L for 75mm thick plain cement concrete type D-2 1:4:8 (40 mm graded stone aggregate) as in sub base complete all as specified and directed. |
| 110 | M&L for 400mmx400mm (10 to 12 mm thick) out door vetrified designer anti skid coloured tiles including designer borders tiles (Square/ rectangular) in floors/path/hard standing etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 111 | M&L for machine cut kota stone slab flooring 18-20 mm thick over and including 20mm cement screed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and polishing complete all as specified and directed. |
| 112 | M&L for machine cut kota stone 18-20 mm thick slab for skirting, dado, riser etc over and including 10mm thick rendering in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and polishing complete all as specified and directed. |
| 113 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 114 | M&L for form work to edges of concrete rough finished surface flats, treads, breaks in floors, window cills, concrete railings, opening in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide complete all as specified and directed. |
| 115 | M&L for formwork to sides and soffits of lintels,lintel bend, beams etc finished rough surfaces of concrete complete all as specified and directed. |
| 116 | M&L for formwork to chullah hoods, chajjas, trough and similar items including edges finished rough surfaces of concrete complete all as specified and directed. |
| 117 | M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 118 | M&L for for mild steel TMT bars 5 mm dia and over up to and including 10 mm dia as in stirrups, spacer and binders, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 119 | M&L for RCC 1:2:4 type B1 using 20 mm graded aggregate as in slab, shelves and stair case etc.all as specified and directed. |
| 120 | M&L for RCC type B 1, 1:2:4 (20mm graded aggregate) as in beams, cantilevers, lintels, complete all as specified and directed. |
| 121 | M&L for RCC 1:2:4 type B1 using 20 mm graded aggregate as in chajjas and like all as specified and directed. |
| 122 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft and loose Soil |
| 123 | Excavating over areas, n exc 1.5 m deep and getting out in solft and loose soil complete all as specified and directed |
| 124 | Removing excavated soil n.exc 50mtr and depositing where directed at a level n exc 150 mtr above the starting point. |
| 125 | Returning filling in,including spreading,levelling,watering and well ramming in layers n exc 25cm in soil complete all as specified and directed. |
| 126 | Excavating in post holes in soft and loose soil (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,complete all as specified and directed. |
| 127 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground in natureal ground complete all as specified and directed |
| 128 | M&L for hardcore of broken brick of gauge exc 63 mm but n. exc 100 mm, deposited, spread and levelled in layers n. exc 15 cm thick, watered and rolled/ rammed to a true surface complete all as specifid. |
| 129 | M&L for plain cement concrete 1:2:4, 20 mm graded stone aggregate in surface chanel, drain work and coping etc complete all as specified and directed. |
| 130 | M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 sectiion) in cement concrete 1:2:4 (type B1) smooth finished, and reforming benching as required of pipe 100mm dia complete all as specified and directed. |
| 131 | M&L for 150 mm dia Reinforced concrete pipes, class NP2, laid and jointed complete with collars laid in trenches and jointes including concrete bed to drain 150 mm bore NP-2 pipe, in plain Cement concrete 1:3:6 type C-1 (using 20 mm graded stone aggregate) including packing under, and haunching against the sides of pipes after they are laid and tested including dismantling of existing pipe complete complete all as specified and directed. |
| 132 | M&L for concrete bed to drain pipes of 150mm bore including packing under and hauching against the sides of pipes after they are laid and tested in PCC 1:3:6 type C2complete all as specified and directed. |
| 133 | M&L for precast reinforced concrete 1:2:4 type B1 using 20 mm graded stone aggregate for cover slab set in and pointed in CM 1:6 including necessary formwork complete all as specified and directed. |
| 134 | Dismantling of bricks (laid flat or on edge) or brick tiles in floors, channels, kerbs, aprons, etc. (each layer) complete all as specified and directed. |
| 135 | M&L for chequered cement concrete tiles 20cm x 20cm x 18-20mm thick with grey cement and no pigment, set, jointed and pointed in neat cement slurry in floors over and including 15mm thick screed bed in CM 1:6 complete all specified and directed. |
| 136 | M&L for PCC kerb stone providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete (Approx Size 300x300x100mm or as per site requirement) in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete incl form work weathering, slightly rounded or chamfered angles and throatingcomplete all as specified and directed. |
| 137 | M&L for Machine pressed precast conctete interlocking paver block with gray cement and pigment or selected coloured or pattern any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade over 25mm thick sand cushioning including spreading and levelling complete all specified and directed. |
| 138 | Dismantling fencing wire mesh any type complete all as specified and directed.. |
| 139 | M&L cement concrete 1:3:6 type C 2, ( using 40 mm graded stone aggregate) as in foundation in filling and mass concrete complete all as specified and directed. |
| 140 | S&F posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, wind ties, etc.; flat iron fillets ( for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165 complete all as directed. |
| 141 | Supply only chain link fencing any size or type complete all as specified and directed. |
| 142 | Fixing only chain link fencing including line wire, any mesh size and shape and type of any standard rails, straning bolts etc encluding provison of binding wire etc complete all as specified and directed. |
| 143 | MS screw bolts with hexagonal or square heads at one end and screwed the other, or screwed both ends,each screwed end to be fitted with washers and one hexagonal or square nut n exc 5cm long 10 mm dia of bolts and nuts |
| 144 | M&L applying two coats of synthetic enamel paint over a coat of red oxide or zinc chrome primer including preparation of new steel or iron surfaces exc 10 cm width or girth complete all as specified and directed. |
| 145 | M&L for brick work in CM 1:6 with sub class 'B' bricks built in one brick thick with old bricks straight or curved on plain surfaces complete all as specified and directed. |
| 146 | M&L for 15mm thick rendering in cement mortar 1:6 on any face of brick walls/ concrete surfaces and finished even and smooth without using any extra cement complete all as specified. |
| 147 | M&L two coats of cement base paint on new plastered wall surfaces over a coat of primer of any description including preparation of surfaces complete all as specified |
| 148 | PCC 1:3:6 type C1 using 20mm graded stone aggregate as in coping of wall incl necessary formwork etc complete all as specified and directed. |
| 149 | M&L for framed work as in doors or ornamental and intricate design gates of angle or other section with gusset plates, rails, braces, including pintal etc. complete, drilled for fixing of steel sheeting or othercovering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete confirming to Fe-410- W(Gde- E-250) quality- B complete all as specified and directed. |
| 150 | Taking down carefully aluminium point wiring any type including battens if any except for ceiling or where not feasible for light/ fan//bell/socket or power and including unscrewing from board, fitting and fixture such as switches,socket, ceiling rose,lamp holder,pendants, bracket and regulator etc and removing material from site including making good disturbed surface to match with the existing surface complete all as specified and directed. |
| 151 | Taking down carefully UNSV main switch DBs of any description of an size in any position complete all as specified and directed. |
| 152 | Taking down submain wiring including all accessories complete all as specified and directed. |
| 153 | Material and labour for point wiring with single core FRLS 1100 volt grade cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium duty ISI marked not less than 20mm dia, with all conduit accessories, screws (concealed conduit wiring in walls and casing capping on ceiling or roof) including metal box suitable for modular fittings and covered with modular plate and cover of suitable size with new brass screws for mounting switch sockets and regulators and drawing continuous earth wire with and including PVC sheathed 1100 Volts grade cable with stranded copper conductor of size 1.5 Sq mm (Nominal area) and connected to main earth dolly complete all as specified for:-(a) One light / fan/ exhaust fan point controlled by one switch. |
| 154 | (b) One 5 pin 5 Amp switch socket out let point on an independent board complete all as specified and directed. |
| 155 | (c) One 5 pin 5 Amp socket out let point controlled by one switch on same board complete all as specified and directed. |
| 156 | All as per item 152 here in before but for one 15 Amp 6 Pin switch socket out let independent with 2.5 Sqmm FRLS (Nominal Area) PVC unsheathed copper conductor single core multistranded incl 2.5 sq mm FRLS PVC copper conductor single core used as earth continuity conductor complete all as specified and directed. |
| 157 | S&F Modular switch one way 10 A, 1 Module complete all as specified and directed. |
| 158 | S&F Modular switch one way 16 A, 1 Module complete all as specified and directed. |
| 159 | S&F Modular Socket 6 Amp, 2/3 Pin combined 2 Module complete all as specified and directed. |
| 160 | S&F Modular Socket 6/16 Amp, 2/3 Pin combined 2 Module complete all as specified and directed. |
| 161 | S&F Modular fan regulator Step up type, 120 Watt, 2 Module complete all as specified and directed. |
| 162 | S&F ceiling rose PVC / Poly carbonate, Isolated body, three terminal AC 230 volts complete all as specified and directed. |
| 163 | M&L for replacement of lamp holder, PVC / Poly carbonate, insulated body modular type with back plate batten/angle type for batten fittings complete all as specified and directed. |
| 164 | S&F in replacement of LED batten 10 Watt 2 feet white colour with, colour temprature 6500K, CRI>80, power factor 0.9, all accessories prewired suitable for wall /surface mounting complete with connection complete all as specified and as directed. |
| 165 | S&F in replacement of LED batten 20 Watt 4 feet white colour with, colour temprature 6500K, CRI>80, power factor 0.9, all accessories prewired suitable for wall /surface mounting complete with connection complete all as specified and as directed. |
| 166 | S&F in replacement LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. |
| 167 | S&F in replacement LED lamp 12 Watt, 230 V , AC integrated circuit complete all as specified and directed. |
| 168 | S&F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 169 | S&F security light fitting, LED type, 25 Watt, 6000 K, pressure die cast housing with prismatic polycarbonate diffuser & indvl LEDs as light source with integrated electronic driver complete withM&L GI pipe mounting bracket of size 25/32 mm dia and 1.20 m long fixed to wall with and including nut, bolts and GI clamps of size 50 x 6 mm as required including two coats of synthetic enameled paint over a coat of primer and making connection with three core 23/.0076 rubber insulated copper cable from ceiling rose to connector of street light complete all as specified and directed. |
| 170 | M&L for sub main wiring with two single core 6.0 Sqmm (FRLS) copper conductor PVC unsheathed cable medium grade including PVC conduit (appropriate size) concealed in wall for sub main connection including 6.0 Sqmm (FRLS) PVC insulated multistranded unsheathed copper conductor used as a earth wire to common earth and connection to earth dolly complete all as specified and directed. (Note :- Two runs of 6.0 sqmm (FRLS) and one run of 6.0 sqmm (FRLS) copper conductor shall be measured as one unit length.) |
| 171 | M&L for sub main wiring with 4 single core 10 Sqmm (FRLS) copper conductor PVC unsheathed cable medium grade including PVC conduit (appropriate size) concealed in wall for sub main connection including 10 Sqmm (FRLS) PVC insulated multistranded unsheathed copper conductor used as a earth wire to common earth and connection to earth dolly all as specified.( Note :- four runs of 10 sqmm (FRLS) and one run of 10 sqmm (FRLS) copper conductor shall be measured as one unit length.) |
| 172 | Taking down carefully ceiling fan from existing site and carry out servicing by opening the motor , removing/ cleaning the dust from complete body , oiling greasing complete incl one coat of white enamel paint including hanging the same, complete fan and lovers.wall or as reqd at site complete all as specified and directed. |
| 173 | Taking down carefully exhaust fan with lovers from existing site and carry out servicing by opening the motor , removing/ cleaning the dust from complete body , oiling greasing complete incl one coat of smoke grey enamel paint in complete fan and lovers .Cutting of wall in appropriate size for fixing of exhaust fan and making good the surfaces of wall and make the fixing arrangement with grouting four Nos fully threaded bolts on wall or as reqd at site complete all as specified and directed. |
| 174 | Taking down carefully Geyser from existing site and carry out servicing by opening , removing/ cleaning the dust from complete body , complete incl one coat of smoke grey enamel paint complete geyser and making good the surfaces of wall and make the fixing arrangement with grouting four Nos fully threaded bolts on wall or as reqd at site complete all as specified and directed. |
| 175 | S&F MCB TPN 40 to 100 Amp 240 volt complete all as specified and directed. |
| 176 | S&F MCB SPN 40 Amp 240 volt complete all as specified and directed. |
| 177 | S&F MCB SPN 32 Amp 240 volt complete all as specified and directed. |
| 178 | S&F MCB single pole 40 Amp 240 Volt complete all as specified and directed. |
| 179 | S&F MCB single pole 6 to 32 Amp 240 Volt 'B' curve 10 KA complete all as specified and directed. |
| 180 | S&F MCCB Triple pole and neutral 63 Amps 415 Volt curve 16 KA complete all as specified and directed. |
| 181 | S&F in repair vertical loadline sheet metal enclosure double door triple poe and neutral AC 415V , 4 Way with 200 Amps rated copper bushbar and IP-54 & K 09 protection with the inbuilt provision for fixing of 1 no MCCB 4 pole and 12 Nos MCBs inside the DB, with metal door and flush to wall including grounding and cutting in existing wall and making good disturbed surface with twocoats of white / colour washing/ distempering etcto match the existing complete all as specified and directed. |
| 182 | S&F flush sheet metal enclosure TPN DB 4 way with double door IP-42 protection detachable gland plates, flush mounting for MCB fitted with bus bar , earth bar and neutral links complete including taking down old unserviceable complete all as specified and directed. |
| 183 | S&F flush sheet metal enclosure SPN DB 12 way with double door IP-42 protection detachable gland plates, flush mounting for MCB fitted with bus bar , earth bar and neutral links complete including taking down old unserviceable complete all as specified and directed. |
| 184 | S&F flush sheet metal enclosure SPN DB 8 way with double door IP-42 protection detachable gland plates, flush mounting for MCB fitted with bus bar , earth bar and neutral links complete including taking down old unserviceable complete all as specified and directed. |
| 185 | S&F flush sheet metal enclosure SPN DB 4 way with double door IP-42 protection detachable gland plates, flush mounting for MCB fitted with bus bar , earth bar and neutral links complete including taking down old unserviceable complete all as specified and directed. |
| 186 | Taking down carefully electric/electronic meter and fixing the same after bldg repair complete all as specified and directed. |
| 187 | M&L for earthing complete including taking out old unseviceable and replace with galvanised steel earth plate 600x600x 6mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 meters below normal ground level, surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate using 4 mm dia GI wire as earth wire electrode moulded and rivetted to earth plate at one end and connected to main switch/ control switches of buildings at another end, GI earth wire encased in and including 15 mm dia GI 'light grade' pipe from upper end of earth plate upto main switch board of building including 20 dia bore GI pipe 'light grade' as water pipe from earth chamber and including excavation and earth work, PCC 1:3:6 type C1 chamber and MS angle iron frame 40x40x3mm and RCC cover 40mm thick (1:2:4) type B1 using 20mm graded stone aggregate reinforced complete all as specified and directed. |
| 188 | Taking down carefully service connections of any description from pole, wall or service brackets etc including making good disturbed surface to match with the existing surface complete all as specified and directed. |
| 189 | Supply and laying & testing UG cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (Heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm, 4 core complete all as specified and directed. |
| 190 | Supply and laying & testing UG cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (Heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm, 4 core complete all as specified and directed. |
| 191 | M&L for sand cushioning laid in trenches for laying of LT UG cables complete all as specified and directed. |
| 192 | M&L Modular bricks common burnt clay building bricks, sub-class ‘B’ designation-75 for LT UG cable protection complete all as specified and directed. |
| 193 | M&L for Cutting of floor/ wall/ road/ footpath for removal of LT U/G cable of any size/description and making good the same as per existing specification after relaying the same or new cable complete all as specified and directed. |
| 194 | M&L for Boring of holes under road /pavement/hard standing or any other situation by mannual means for 80/50 mm bore at the depth not less than 1 mtr below ground level for crossing the cable and making good both the ends complete all as specified and directed. Note :- GI pipe shall be measure and paid separately under respective item. |
| 195 | S&F GI tubes light grade of dia 80 mm with all fitting and fixed complete for protection of LT UG cables laid to walls or in floors or along with poles etc complete all as specified and directed. Total in Figures 0.0 23 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
