AUTO DARKENING WELDING HELMET CONFIRMING TO EN 379 (FILTER) / ANSI Z 87.1 AS PER THE FOLLOWING SPECIFICATION. 1) EXTERNALLY R EGULATED SHADE DIN 9-13. 2) LIGHT / INACTIVE SHADE - DIN 3 OR 4. 3) VIEWING AREA (MINIMUM) 92 MM X 39 MM. 4) SWITCHING TIME FROM LIGHT TO DAR K SHOULD NOT BE MORE THAN 0.0005 SEC, DARK TO LIGHT RANGE BETWEEN 0.1 TO 1 SEC. 5) OPERATING TEMPERATURE -5 TO 55 DEG C. 6) POWER SUPPLY - SOLAR CELLS ASSIST WITH LITHIUM BATTERIES. 7) SENSITIVITY AND DELAY ADJUSTMENT SHOULD BE CONTINUOUS/STEP LESS. MAKE: ADOR/ESAB/MESSER/ WELSPRING UNIVERSAL/KEMPPI/MIGATRONIC/GCE/3M/DELTA PLUS [ Warranty Period: 6 Months after the date of delivery ] ]
2
AUTO DARKENING WELDING HELMET CONFIRMING TO EN 379 (FILTER) / ANSI Z 87.1 AS PER THE FOLLOWING SPECIFICATION. 1) EXTERNALLY R EGULATED SHADE DIN 9-13. 2) LIGHT / INACTIVE SHADE - DIN 3 OR 4. 3) VIEWING AREA (MINIMUM) 92 MM X 39 MM. 4) SWITCHING TIME FROM LIGHT TO DAR K SHOULD NOT BE MORE THAN 0.0005 SEC, DARK TO LIGHT RANGE BETWEEN 0.1 TO 1 SEC. 5) OPERATING TEMPERATURE -5 TO 55 DEG C. 6) POWER SUPPLY - SOLAR CELLS ASSIST WITH LITHIUM BATTERIES. 7) SENSITIVITY AND DELAY ADJUSTMENT SHOULD BE CONTINUOUS/STEP LESS. MAKE: ADOR/ESAB/MESSER/ WELSPRING UNIVERSAL/KEMPPI/MIGATRONIC/GCE/3M/DELTA PLUS [ Warranty Period: 6 Months after the date of delivery ] ]
3
AUTO DARKENING WELDING HELMET CONFIRMING TO EN 379 (FILTER) / ANSI Z 87.1 AS PER THE FOLLOWING SPECIFICATION. 1) EXTERNALLY R EGULATED SHADE DIN 9-13. 2) LIGHT / INACTIVE SHADE - DIN 3 OR 4. 3) VIEWING AREA (MINIMUM) 92 MM X 39 MM. 4) SWITCHING TIME FROM LIGHT TO DAR K SHOULD NOT BE MORE THAN 0.0005 SEC, DARK TO LIGHT RANGE BETWEEN 0.1 TO 1 SEC. 5) OPERATING TEMPERATURE -5 TO 55 DEG C. 6) POWER SUPPLY - SOLAR CELLS ASSIST WITH LITHIUM BATTERIES. 7) SENSITIVITY AND DELAY ADJUSTMENT SHOULD BE CONTINUOUS/STEP LESS. MAKE: ADOR/ESAB/MESSER/ WELSPRING UNIVERSAL/KEMPPI/MIGATRONIC/GCE/3M/DELTA PLUS [ Warranty Period: 6 Months after the date of delivery ] ]
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
