|
| 1 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.. |
| 2 | Material and labour for 15 mm thick rendering in cement mortar 1:4 on brick work or concrete surface, surface finished even and fair with water proofing compound complete all as specified and directed..Note: Water proofing compound will be measured & paid separately under respective item of the schedule. |
| 3 | Material and labour for 5 mm thick rendering on celing surface in cement mortar 1:3 mixed surface finished even and smooth complete all as specified and directed.. |
| 4 | Material and labour for 15 mm thick rendering on brick work or concrete surface in cement mortar 1:6, surface finished even and fair complete all as specified and directed.. |
| 5 | Material and labour for preparation of wall and applying wall care putty 1 to 1.50 mm thick to make the surface smooth as specified and directed. |
| 6 | Material and labour for one coat of oil bound distemper in any tint on surfaces of walls including preparation complete all as specified in SSR Part I and directed. |
| 7 | Material and labour for two coats oil bound distemper any tint on old decorated surfaces of walls including preparation of surface complete all as specified in SSR Part I and directed. |
| 8 | Material and labour for one coat of cement base paint in any tint on surfaces of walls including preparation complete all as specified in SSR Part I and directed |
| 9 | Material and labour for one coat of white wash on ceiling including preparation of surfaces complete all as specified and directed. |
| 10 | Material and labour for preparation of newly plastered surface of wall and applying two coat of oil bound distemper over a coat of primer complete all as specified and directed. |
| 11 | Material and labour for preparation of newly plastered surface of wall and applying two coat of cement base paint over a coat of primer complete all as specified and directed. |
| 12 | Material and labour for preparation of newly plastered surface of ceiling and applying three coat of white wash complete all as specified and directed. |
| 13 | Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 14 | Material and labour for 25 mm thick PCC 1:2:4 type B-0 using 12.50 mm graded stone aggregate as in leveling course to floors complete all as specified and directed. |
| 15 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed. |
| 16 | Material and labour for non skid / mat finish ceramic colour tiles of size 300 mm x 300 mm and 6- 7 mm thick, in floors etc, set and jointed in neat cement slurry @ 3.0 Kg/sqm and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:4 and complete all as specified and directed. |
| 17 | Material and labour for non-skid / mat finish designed coloured joint free ceramic tiles of size not less than 400 mm x 400 mm x6- 7 mm thick in floor, set and jointed in neat cement slurry @ 3.0 Kg/sqm and pointed in coloured cement to match over and including 15 mm thick screed in cement mortar 1:4 complete all as specified and directed. |
| 18 | Descriptio all as per item No17 above but as in skirting including 10 mm thick rendering in cement mortar 1:4, complete all as specified and directed. |
| 19 | Material and labour for glazed ceramic colour tiles size 300 mm x 450 mm x 6-7 mm thick on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry @ 3.0 Kg/sqm and pointed in coloured cement to match over and including 10 mm thick rendering in cement mortar 1:4 and complete all as specified and directed. |
| 20 | Material and labour for 75mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection or similar work/places, laid in alternate bays and filling the joints with & including bitumen and sand 1:3 by weight, surface finished even and fair without using extra cement complete all as specified and directed. |
| 21 | Material and labour for 15 to 18 mm thick Granite(of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 22 | Material and labour for grinding and polishing to edges and rounding of granite kota or marble slab and smooth finishing complete all as specified and as directed |
| 23 | Taking down and re-fixing the existing shutter in same opening after & including necessary easing/repair etc. exc. 1 Sqm but n. exc. 2 Sqm each complete all as specified and directed. |
| 24 | Taking down and re-fixing the existing shutter in same opening after & including necessary easing/repair etc.n exc. 1 Sqm complete all as specified and directed. |
| 25 | Taking down shutter of any description, n. exc. 1 Sqm each and removing from site complete all as specified and directed. |
| 26 | Taking down shutter of any description, exc. 1 Sqm but n exc 2.0 Sqm each and removing from site complete all as specified |
| 27 | Taking down chowkhats or frames n. exc 1.5 sqm each without taking off shutter from the frame complete. |
| 28 | Taking down chowkhats or frames exc 1.5 sqm but n exc 4.0 sqm each without taking off shutter from the frame complete. |
| 29 | Supply and fixing of pressed steel frames of size 105x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., including sanding, tarring backs of chowkhats, PCC 1:2:4 type B-0 filling in frame and for holdfast, 2 Nos 12 mm dia MS tie bars at the bottom of frame and one shop coat of red oxide primer etc complete all as specified and as directed. |
| 30 | Supply and fixing of pressed steel frames of size 125x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., including sanding, tarring backs of chowkhats, PCC 1:2:4 type B-0 filling in frame and for holdfast, 2 Nos 12 mm dia MS tie bars at the bottom of frame and one shop coat of red oxide primer etc complete all as specified and as directed. |
| 31 | Supply and fixing of 35mm thick second class hardwood (Golden Teak) glazed and Skelton factory made door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Pt I-2009 section 8 clause 8.24 (a) complete all as specified and directed. |
| 32 | Supply and fixing of 35mm thick 2nd class hard wood factory made plain framed panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply.The size of rail and stile as per IS:1003 (Part1),kiln seasoned and chemically pressure treated, complete all as specified and directed. |
| 33 | Supply and fixing of 24 mm thick moulded WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side plain with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire etardant and having screw holding capacity complete all as specified and directed. |
| 34 | Supply and fixing of factory made 100 % solid wood plastic composite (WPC) door frame 75x50 mm made from wood plastic composite (single extruded process) material with density 780 Kg/Cum from ISO certified company door should be water proof, termite proof, fire retardant and having good screw holding capacity all as per specification and drawing complete all as specified and directed. |
| 35 | Dismantling block board/ boarding of any description complete including iron mongries complete all as specified and directed. |
| 36 | Supply and fixing of 18 mm thick PVC board one side prelaminated and other side plain white colour as in cup board shutters and frames, kitchen cabinet front shutter, partion, shelf, & drawer, fixed with screws, solvent cement / adhesive complete all as specified and directed. |
| 37 | Supply and fixing of 18 mm thick PVC board both side plain white colour as in cup board shutters and frames, kitchen cabinet front shutter, partion, shelf, & drawer, fixed with screws, solvent cement / adhesive complete all as specified and directed. |
| 38 | Supply and fixing of magnetic catcher and striking plate including letting in and fixed complete all as specified and directed. |
| 39 | Supply and fixing of continious (PIANO) hinges, mild steel, bright finish or electrogalvanised. 30 mm width of flaps (when open) complete all as specified as directed. |
| 40 | Supply and fixing of stainless steel bright finish barrel tower bolts 125 mm long one piece and fixed complete all as specified and directed. |
| 41 | Supply and fixing of factory made steel window with side hung shutters including box type hinges with steel handle, steel peg stay,tower bolt etc. complete with glazing bars, dovetailed or welded including taking down existing window etc complete all as specified and directed. |
| 42 | Supply and fixing of factory made steel window with side hung shutters including box type hinges with steel handle, steel peg stay, tower bolt etc.complete without glazing bars, dovetailed or welded including taking down existing window etc complete all as specified and directed. Please Enable Macros to View BoQ information |
| 43 | Supply and fixing of factory made steel window with side hung shutters including box type hinges with steel handle, steel peg stay, tower bolt etc.complete without glazing bars, dovetailed or welded including taking down existing window etc complete all as specified and directed. Please Enable Macros to View BoQ information |
