|
| 1 | BOQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) File No 8973/E8 Tender Inviting Authority: GARRISON ENGINEER GOLCONDA Name of Work: SPL REPAIR TO VARIOUS OTM ACCNS OF RI AT ARTY CENTRE UNDER GE GOLCONDA Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of work Item Code / Make No or Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Figures To be entered by the Bidder including all TaxesRs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words Represent (%) Percentage having Above/ Below ( + or - denomination) the Lump sum pre price inserted by MES |
| 2 | Dismantling of AC sheets / Galvalume sheet / GI Sheet of corrugated or semi corrugated etc. sheets in roof coverings complete all as specified and as directed. |
| 3 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 4 | Material and labour Preparation of old painted steel surfaces of any description over 10 cms width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 5 | S&F MS framed Angle sections as in posts main and cross beams, hip and jack rafters; purlins where connected to common rafters and drilling holes for existing wooden/steel angle rafter; fixed with angle cleats MS Screw bolts necessary welding to purlins or other connecting plate of Grade Fe 410 -W (Gde- E- 250) quality- A etc. complete all as specified and directed. |
| 6 | Material and Labour for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed. |
| 7 | Material and Labour pre-painted galvalume aluminium zinc coating GI based corrugated sheet 0.50 mm thick of any colour having tensile strength 550 mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 8 | Material and Labour pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified |
| 9 | Dismantling of boarding, any description fixed in any position with nails complete all as specified and directed. |
| 10 | M & L for Providing and fixing false ceiling at all heights False ceiling tiles of size 595 x 595 x 12 mm of approved texture, design and patterns having moisture contents less than 2% humidity resistance of 99% NRCO.50 to .75 as pe IS8225:1987, Non-combustible as per BS 476 (Part 4)-1970 and light reflectance of 85% (Minimum) to be laid in true horizontal level suspended on interlocking metal T Grid of hot dipped galvanized iron section of 0.33 mm thick ( galvanised @ 120 gms per sqm including both sides ) comprising of main T runners of size 15 x 32 mm of length 3000mm, cross -T of size 15 x 32 mm of length 600mm to form grid module of size 600 x 600mm, suspended from ceiling using galvanized mild steel items ( galvanizing @ 80 grams per sqm) i..e 50mm long, 8mm outer diameter M-6 dash fastener 4mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85x25 x 2mm galvanised iron perimeter wall angle of size 24 x 24 x 0.40mm of length 3000mm to be fixed on periphery wall/ partition with the help of plastic rawl plugs at 450 mm centre to centre and 50mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-charge. |
| 11 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. |
| 12 | Taking down cement plaster on wall of any descriptions including racking out joints for key scrubbing with water etc. |
| 13 | Material and Labour for brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 14 | Material and Labour for brickwork with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1: 4 complete all as specified and directed. |
| 15 | Supply and fix Galvanised wire netting 0.71mm dia size of mesh in 12mm fixed with nails on concrete surfaces complete all as specified and as directed. |
| 16 | Material and Labour for rendering 15mm thick in two layers using natural river sand (10mm & 5mm) cement mortar 1:4 on concrete or brick wall surfaces, 5mm thick finished even and smooth without using extra cement, mixed with WPC @ at 2% by weight of cement (IWPC measured and paid separately) complete all as specified and directed. |
| 17 | Supply only integral water proofing compound complete all as specified and as directed. |
| 18 | Material and Labour for rendering using natural river sand 10mm thick in cement mortar 1:6 on Brick wall surfaces, finished even and smooth without using extra cement complete all as specified and directed. |
| 19 | Material and Labour for two coats of oil bound distemper over a coat of alkali resistant primer on newly plastered surfaces of walls including applying 1mm thick (two layers 0.5mm each) Birla white wall care putty to fill up the depression and rubbing with sand paper to achieve a levelled and smooth surface and preparation of surface complete all as specified and directed. |
| 20 | Material and Labour for preparing new plastered surfaces of walls and applying Two coats of cement based paint complete all as specified and directed. |
| 21 | M & L for complete removal of existing treatment and applying 1mm thick (two layers 0.5mm each) Birla white wall care putty to fill up the depression and rubbing with sand paper to achieve a levelled and smooth surface and applying two coats of oil bound distemper over a coat of chalk whiting primer on surfaces of internal walls complete all as specified and directed . |
| 22 | M & L preparation of old RR masonry surfaces of walls, any descriptions applying two coats of Cement wash with Portland cement slurry to a smooth bodied opaque finish complete and all as specified. |
| 23 | Dismantling Stone slabs and tiles of any description or thickness in floors,plinth Protection, aprons etc Laid, bed-ded and pointed in any mortar,complete all as specified and as directed. |
| 24 | Material and labour for Mirror finish/ polish Machine cut kota stone slab flooring 20-25mm thick over 20mm thick screed in CM 1:6 over PCC sub base/RCC slab. laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and as directed. |
| 25 | Material and labour for Mirror finish/ polish machine cut Kota stone slab 20-25mm thick in riser of step, skirting, dado & pillar laid over 10mm thick backing coat of CM 1:3.& jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and as directed. |
| 26 | M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 27 | M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed. |
| 28 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish of the premises complete all as specified and directed. |
| 29 | M&L for non skid coloured ceramic tiles 7 to 8mm thick (square or rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.16 sqm, in floors etc, and cement screed in CM 1:6, 15mm thick and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed. |
| 30 | M & L for glazed coloured ceramic tiles in vertical surfaces of size 450mmx300mmx7mm thick laid over 10mm thick back coat in CM (1:4), set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles, complete all as specified and directed. |
| 31 | M&L for Vitrified Ceramic tiles, light shade, 10mm thick (Square or rectangular) polished, area of each tile not exc 0.36 Sqm as in floors etc., and laid over and including cement screed bed or bedding layout in CM (1:6), 15mm thick and jointed in neat slurry and pointed in white or coloured cement to match using light shade coloured tiles complete, all as specified and directed. |
| 32 | Material and Labour plain Cement Concrete Type B1 1:2:4 (using 20 mm graded granite stone aggregate) cast in situ in lintels up to 1.5 M span, cills and other similar bands, plinth courses, parapets, copings, bed plates and the like including weathering, slightly rounded complete all as specified and directed. |
| 33 | Material and Labour for 75 mm thick PCC 1:3:6 type C2 (Using 40 mm graded granite stone aggregate & fine aggregate natural river sand) as in plinth protection etc laid in bays / panels not exc. 2.00 Sqm each including construction joints at suitable interval and each corner and filled with bituminous mastic filling (1 part bitumen & 3 part sand) and finished the surface even and smooth without using extra cement complete all as specified and as directed. |
| 34 | Material and Labour for Hard core of gauge n.exc 63 mm, deposited, spread and levelled in layers n.exc 15 cm thick, watered and rammed to a true surface complete all as specified and as directed. |
| 35 | Demolition of Concrete in ground floors any description and including pavings tiles n exc 15 cm thickness (below or above ground level) and removal of debris or rubbish of the premises complete all as specified and directed. |
| 36 | Material and labour for 25 mm thick, PCC 1:2:4 type B0 (using 12.50 mm graded stone aggregate) as in sub base of flooring complete all as specified and as directed. |
| 37 | M&L for 75mm thick PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in sub base complete all as specified and as directed. |
| 38 | M&L for 100mm thick Cement concrete type B-1, 1:2:4 (Mix with 40, 20mm graded aggregate and fine aggregate Natural river sand) Finishing cement concrete surface even and smooth Without using extra cement and Spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green etc complete all as specified and directed |
| 39 | Demolition of reinforced cement Concrete of any description and in any position not otherwise specifically provided for |
| 40 | M&L for Pre Cast Cement Concrete 1:2:4 type B1 (using 20 mm graded aggregate) as in lintels /Cover slab for manholes etc set in cement mortar 1:4 including use and waste necessary form work (Reinforcement shall be measured and paid separately) complete all as specified and as directed. |
| 41 | M&L for mild steel TMT bars 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed not less than 0.9 mm dia or securing with clips complete all as specified and as directed. |
| 42 | Supply and fix Windows of Double Rebate windows made of pre-painted steel (Base steel as per IS 513 of 0.58mm thick “D” Quality galvanized as per IS 277 with zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer. Section for outer frame should be of 72x55mm, centre mullion should be of 72x50mm, section for fixed glass beading should be of 12x12mm and section for shutter should be of 52 x 25mm. Outer frame & mullion sections to have rebate for glazed shutters, fly mesh and 20 mm provision for guard bars/ grills fly mesh shutter section should be of 20x40mm. The sections are to be cut to length mitre joined with corner bracket. Centre mullions to be fixed with mullion cap. Elixir or equivalent stay, handles 2nos of heavy duty stain less steel pivot hinges shall be provided per shutter. The windows should be panelled with 5 mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade). Rubber Gaskets are provided all around the glass. The above frames should be fixed to the concrete/masonry wall by means of self expanding screws. Including 10mm square guard bars with 6” (152.4mm) pitch, complete for finished item of work including taking down existing steel windows and making good disturbed surfaces complete all as specified and as directed. |
| 43 | Taking down chowkats with shutters (without taking off shutters from the frame exc 1.5 Sqm and n.exc 4 Sqm each and offered as credit complete all as specified and as directed. |
| 44 | All as per item No. 42 above here in before but n exc 1.5 Sqm |
| 45 | S&F Pressed steel frames 125x60 mm and thickness 1.5mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified, supplied & fixed complete all as specified and as directed. |
| 46 | S&F Pressed steel frames 105x60 mm and thickness 1.5 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified, supplied & fixed complete all as specified and as directed. |
| 47 | Material and labour IInd Class hard wood 35mm Double/Single Flush door shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides complete all as specified and as directed. |
| 48 | Material and labour Second class hard wood 35mm thick, glazed and skeleton shutters open rebated and prepared to receive glass or gauge etc divided into squares with plain chamfered or rounded and rebated sash bars any numbers complete all as specified and as directed. |
| 49 | Material and labour Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed within wooden beading or with nuts and bolts to existing steel windows/wooden windows complete all as specified and as directed. |
| 50 | Supply and fix Butt hinges,100mm medium weight, cold rolled mild steel, and fixed complete all as specified and as directed. |
| 51 | Supply and fix Extruded aluminium alloy handles,150mm fabricated type anodized complete all as specified and as directed. |
| 52 | Supply and fix Aluminium, 200mm anodized, barrel tower bolts extruded section & fixed complete all as specified and as directed. |
| 53 | Supply and fixing 300mm Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts & nuts, four on bolts plate & two on staple plate & fixed complete all as specified and as directed. |
| 54 | M & L for Preparation of new or previously untreated steel Surfaces of any description, not otherwise described, over 10cm width or girth applying two coats of synthetic enamel paint over coat of primer complete all as specified and directed. |
| 55 | M & L for Preparation of new or previously untreated wooden Surfaces of any description, not otherwise described, over 10cm width or girth applying two coats of synthetic enamel paint over coat of primer complete all as specified and directed. |
| 56 | S&F 150mm Floor door stopper of aluminium alloy body & tongue, anodized, with hard drawn steel spring, fixed in floor complete all as specified and as directed. |
| 57 | Supply and fix Mild steel 300mm long ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed. |
| 58 | Material and labour Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification all as directed. |
| 59 | Material and labour Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside complete all as specified and as directed. |
| 60 | Supply and Fix 100mm Butt hinges, extruded Aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-22 complete all as specified and as directed. |
| 61 | Supply and fix Aluminium, 150mm anodized, barrel tower bolts extruded section & fixed complete all as specified and as directed. |
| 62 | S&F in repair stainless steel curtain rod 20 mm dia and Mild steel chromium plated brackets suitable for curtain rods of 19/20mm dia, including taking off the old articles (Pelmets/wooden/arrangement of curtain), plugging up new key holes, making good the disturbed surface and painting one coat on disturbed surface as required complete all as specified and as directed. |
| 63 | Hacking out old broken glass (any thickness, size, quality or description) from steel frames glazed with putty or fixed with beads Supply and fix sheet glass 4mm thick and glazing with oil putty/ alu beads n.exc. 0.50sq.m. each pane, etc complete all as specified and directed |
| 64 | Supply and fix in repairs Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed within wooden beading or with nuts and bolts to existing steel windows/wooden windows complete all as specified and as directed. |
| 65 | Material and labour for Preparation of old painted wooden surfaces of any description over 10 cms width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 66 | Taking down 15mm bore steel tubing and connections in any position, Complete all as specified and directed. |
| 67 | Taking down 20mm bore steel tubing and connections in any position, Complete all as specified and directed. |
| 68 | Taking down 25mm bore steel tubing and connections in any position, Complete all as specified and directed. |
| 69 | Supplying and fixing of 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including provision of special fittings ( Unions, elbow, Tee, Male threaded brass adaptor, Female threaded brass adaptor, Tank adaptor etc), complete all as specified and as directed. |
| 70 | M&L for 20 mm bore GI Tubing medium grade with all fittings fixed to wall/ ceiling or in floor complete as specified and directed. |
| 71 | M&L for 25 mm bore GI Tubing medium grade with all fittings fixed to wall/ ceiling or in floor complete as specified and directed. |
| 72 | S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 1000 ltrs capacity hoisted and fixed in position all as specified including dismantling old tank complete all as specified and directed. |
| 73 | S&F in repairs 20 mm dia brass ball valve, high pressure with polythene float and fly-nut complete, screwed for iron pipe or brass ferrule complete all as specified and directed. |
| 74 | S&F in repair 20 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 75 | S&F in repair 25mm bore dia Gun metal Gate valve with iron wheel head screwed both ends for iron pipe or for union, complete all as specified and directed. |
| 76 | S&F for wash down water closet (pedestal pattern) complete white with plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device and flush pipe of polyethylene of low or density or PVC 32mm dia for low level flushing cistern including pedestal pan and trap, and connection to drain (or outgoing pipe) complete all as specified and as directed. |
| 77 | S & F in repair vitreous china bowl urinal flat back size of 465 x 355 x 265mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern & flush pipe) but excluding waste pipe, complete including providing & fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with screws, pointing around urinal back in cement complete all as specified and directed. |
| 78 | S&F in repair two way bib tap / cock 15mm bore, chromium plated, fancy type complete all as specified and directed. Make : Jaqur COP-041PM 2-way Bib Cock with Wall Flange or Techno commercially equivalent make as approved by GE. |
| 79 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. complete all as specified and directed. |
| 80 | Supply and fix PVC valveless syphonic action type flushing cistern 10 lit capacity low level white with inlet, ball valve, float and handle including brackets and 32mm PVC flush pipe complete all as specified and directed. |
| 81 | S&F for vitreous china wash basin, white, flat back size 550 x 400mm including 01 Nos cast copper alloy 15mm CP fancy type pillar tap, 01 Nos 32mm waste coupling , one pair of MS bracket, cutting for and pinning in ends of brackets complete all as specified and directed. |
| 82 | S&F 600mmx450mm bevelled edge looking mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood with PVC / aluminium frame and fixed to wooden plugs with chromium plated brass screws, cup washers, complete all as specified and directed. |
| 83 | S&F in repairs 15 mm dia fancy type concealed stop valves/ angle cock chromium plated screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 84 | S & F in repair 15mm bore Bib taps, chromium plated cast copper alloy but fancy type, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 85 | S&F in repairs PVC connection 15mm dia, 45 Cms long with brass ferrules on both ends fixed complete all as specified and directed. |
| 86 | S & F brass chromium plated tubular towel rail 20 mm dia ‘D’ type 60 cm long between flanges of brass chromium plated complete all as specified and directed. |
| 87 | S & F PVC( SWR ) pipes 110mm dia single socketed , in any length with rubber ring joints as rainwater, soil waste and vent pipe (with all fittings) fixed to wall including taking down existing pipe complete all as specified and directed. |
| 88 | S & F PVC (SWR) pipes 110mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors including taking down existing pipe complete all as specified and directed. |
| 89 | S & F PVC( SWR ) pipes 75mm dia single socketed , in any length with rubber ring joints as rainwater, soil waste and vent pipe (with all fittings) laid in trenches including taking down complete all as specified and directed. |
| 90 | S&F in repair PVC (SWR) bends any radius 110mm bore complete all specified and directed. |
| 91 | S&F in repair PVC (SWR) bends with access door any radius 110mm bore complete all as specified and directed. |
| 92 | S&F PVC (SWR) junction single (single T) equal or unequal with access door of bore 110mm complete all as specified and directed. |
| 93 | S&F PVC(SWR) vent cowl 110mm bore complete all as specified and directed. |
| 94 | S&F PVC (SWR) bends any radius 75 mm dia complete all as specified and directed. |
| 95 | S&F PVC (SWR) bends with access door any radius 75 mm dia complete all as specified and directed. |
| 96 | S&F PVC (SWR) junction single (single T) equal or unequal of bore 75mm complete all as specified and directed. |
| 97 | S&F in repair PVC (SWR) floor trap 75mm dia outlet, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 98 | Dismantling Stone slabs/ tiles, floors, paths, aprons etc any description or thickness and S&F for 60mm thick M-35 grade factory made rubber moulded precast concrete interlocking paver block in grey cement with pigments and of approved size and shape and conforming to IS 15658-2006, laid over 50mm thick sand bedding layer laid to true line, level watered and mechanically compacted etc complete all as directed. |
| 99 | Dismantling chequered floor tiling including cement mortar bedding and M&L for chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick with grey cement and pigment, machine pressed, set jointed and pointed in neat cement slurry in floors over 20 mm thick screed bedding layer in CM 1:6 complete all as specified and directed. |
| 100 | Taking out carefully copper/aluminium point wiring,Light,fan, bell,socket or power complete with all fitting, fixtures such as switch socket out let, ceiling rose ,holder ,regulator,DBs, refixing of fans etc including making good the disturbed surface of wall/floors complete all as specified and directed. |
| 101 | Taking down existing sub main wiring of any description and size including earth wire, batten, conduits and making good the disturbed surfaces of walls, floors etc. |
| 102 | M & L for providing point wiring with 1.5 sq. mm (nominal area) single core PVC insulated FRLS unsheathed multi-stranded copper conductor cable (maintaining colour code), 1100 volts grade in and including non metallic rigid PVC conduit medium grade with appropriate size with all fittings (ISI Marked) suitable for concealed / surface wiring on stone/brick, masonry walls, roof etc including modular sunken box of adequate size with suitable modular plate cover for mounting modular switches, sockets, regulators, light fittings etc. complete with all fittings and accessories fixed to wall/ ceiling for one light/ fan /bell point controlled by one oneway modular switches including one run 1.5 sqmm (nominal area) PVC insulated FRLS unsheathed multi-stranded copper conductor cable green in colour for earth continuity conductor connected to common earth dolly including making good the disturbed surfaces to match with the existing specification, complete all as specified & directed at site for :- one light controlled by one switch. |
| 103 | As per item No 101 one ceiling fan controlled by one switch & regulator. |
| 104 | As per item No 101 one 3 pin socket 6 Amp on independent board. |
| 105 | As per item No 101 one 3 pin socket 6 Amp on same board. |
| 106 | All as per item No. 101 but for One 3 pin 15 Amps switch socket outlet point on independent board with 4.0 sqmm PVC (FRLS) insulated unsheathed single core multi stranded copper conductor all as specified and directed. |
| 107 | Supply and fix Modular switch, single pole, one way, 6 Amps one module complete all as specified and directed. |
| 108 | Supply and fix Modular 6A 3 pin universal socket outlet, 2 module complete all as specified and directed. |
| 109 | Supply and fix Modular switch, single pole, one way, 16 Amps one module complete all as specified and as directed. |
| 110 | Supply and fix Modular socket outlet 2-in-1, 6/16 Amps, 2 module complete all as specified and as directed. |
| 111 | Supply and fix Ceiling rose surface bakelite three terminal / PVC / Polycarbonate / isolated body 65x50 mm, terminals 240 volts complete, all as specified and directed. |
| 112 | Supply and fix modular stepped type electronic fan regulator 220 volts, 100Watt complete all as specified and as directed. |
| 113 | Supply and fix 20W,decorative, wall mounted, ultra slim, LED lighting fixture size (1224x 43x58)mm, 6500K with high lumen output, environmental friendly, energy efficient with electronic driver complete with all fixing arrangement including connection with twin twisted unsheathed PVC copper cable of suitable size etc, complete all as specified and as directed. |
| 114 | Supply & fix in repair LED down lighter 2'x2', 36 W environmental friendly, new generation, aesthetically designed, ultra modern recess mounting luminaire with high brightness SMD LEDs as light source, suitable for Armstrong/Grid ceiling complete all as specified and directed. Make : Havells Cat No. PLANO2X2PLR34WLED865S or approved equivalent make. |
| 115 | Supply and fixing LED BLDG Security Light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection including connection with twin twisted unsheathed PVC copper cable of suitable size alongwith suitable brackets with clamps, nuts and bolts complete all as specified and directed. Makes: Havells Cat No. ENDURASUNDOWN SL35WLED765 PASYBOPC or techno commercially equivalent make in Philips/ Wipro as approved by GE. |
| 116 | S&F in repair Factory made SPN 8 ways distribution board in sheet steel enclosure double door with suitable rated bus bar, 240 Volts suitable for housing RCBO SPN MCBs as incomer and SP MCBs as outgoing complete all as specified and as directed. |
| 117 | S&F in repair Factory made Prewired TPN 4 ways distribution board in sheet steel enclosure vertical double door with suitable rated bus bar, 415 Volts suitable for housing TPN MCBs as incomer and SP MCBs as outgoing complete all as specified and as directed. |
| 118 | S&F in repair 240V, 10 KA 'C' curve MCB of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed at site. |
| 119 | S& F in repair RCBOs SPN 32 Amp, 240 volts 50Hz AC supply, in the MCB DB Complete with connection testing and commissioning complete all specified and directed. |
| 120 | S&F in repair MCB, Four pole, 240 volts, 63 Amps 10 KA C curve in the MCB DB Complete with connection testing and commissioning complete all as specified and as directed. |
| 121 | M&L for Submain wiring with 4 single core PVC (FRLS) insulated flexible copper conductor cable of size 6 Sqmm and one single core PVC (FRLS) insulated unsheathed flexible copper conductor cable green colour of size 6.0 Sqmm as earth lead in and including PVC conduit medium grade/casing capping with all fittings suitable for concealed/surface type and making good the disturbed wall surfaces to match with existing specification all as required at site complete all as specified and directed at site.Note: Four runs of 6Sqmm and one run of earth run and one run of PVC conduit shall be measured as one unit length. |
| 122 | Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25 mtr below ground level) with top edge of the plate not less1.5 mtrs below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts nuts, check nuts and washers of galvanized iron of steel all as shown in electrical plate No.3 connected to earthing test point including necessary earth work, excavation PCC 1:3:6 type CI using 20mm graded stone aggregate for earth chamber provn of PCC cover 40 mm thick 1:2:4 mm type B1 funnel with 20 mm dia medium grade water Pipe, GI pipe for water Pipe, 15mm dia medium grade protection pipe for GI earth lead complete all as specified and directed by the Engr-in-charge. |
| 123 | S&F single pole and neutral enclosure with a two pin and earth AC plug and socket complete with one single pole 20 Amps MCB complete all as specified and directed. |
| 124 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50.0 sq. mm 3.5 core including removing any size of cable all as specified and directed. |
| 125 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25.0 sq mm 3.5 core including removing any size all as specified and directed. |
| 126 | Supply, install, testing and commissioning of new Out door LT feeder Pillar Box, factory fabricated, CPRI tested , cubicle type, 3.15 mm thick CRCA sheet vermin proof with 3 phase and neutral Aluminium bus bar of current capacity 200A of suitable size, phase and neutral colour coded with heat shrinkable PVC sleeves, with necessary supports, angle iron frame work and stand, locking arrangements and painting with one coat of red oxide primer and two coats of powder coated paint, suitable size of panel control copper wiring, accessories and necessary cable entry/exit boxes for all incoming and out going cables with suitable cable glands etc including PCC foundation complete all as specified and directed and consisting of one MCCB 63A/100A, 4P,16 kA . |
| 127 | M&L Earthing complete with galvanized steel with plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground (earth kit not less than 2.25 mtr below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to galvanized iorn strip 25x 4mm by means of bolts, nuts and washers of galvanized iron or steel all as shown in electrical plate No 3 of SSR part-I connected to earth test point including necessary earth work and excavation, PCC 1:3:6 type C1 using 20mm graded stone aggregate for earth chamber with RCC cover 50mm thick 1:2:4 mix type B1, using 8mm dia TMT bars reinforcement @ 140mm c/c both ways, watering funnel with GI pipe 40 mm dia medium grade and protection pipe GI 15 mm dia medium grade including testing after completion complete all as specified and directed. |
| 128 | S&F galvanized steel water tubing medium grade of 40mm bore complete with all fittings such as bends elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps and pigs, unions including taking up or down existing steel tubing with fittings all as specified and directed. |
| 129 | All as per item no.127 above but 25 mm bore |
| 130 | S & F stop valve cast copper alloy screwed down high pressure with crutch & butterfly handle, 25mm bore complete all as specified and as directed. |
| 131 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundation, laying of poles / cable in trenches and getting out in hard/dense soil complete all as specified and as directed . |
| 132 | Returning, filling including spreading, levelling, watering and well ramming in layers not exceeding 25 cms thick complete all as directed by Engineer-in-Charge. |
| 133 | Removal of surplus soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above from the starting point complete all as specified and directed. |
| 134 | Cutting/Boring on the existing CI/GI pipe line 50mm dia (in position) for insertion of new galvanised Tee 50 x 40 mm for branch connection including necessary jointing material complete all as specified and as directed. Total in Figures 0.0 0.0 INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
