|
| 1 | Dismentaling of existing damaged cup board cupboard, flooring and ceiling and staking properly etc. including all leads and lift complete in all respect as per direction by Engineer-in-Charge. |
| 2 | Providing and fixing 19 mm thick commercial board water proof shutters for cup boards i/c fixing with nickel plated piano hinges with screws etc. including all leads and lift complete in all respect as per direction by Engineer-in-Charge. |
| 3 | Providing and fixing 1.00 mm thick coloured or plain lamination sheet (teak/Sunmica) on boards/ply wood sheets with approved adhesive and nails etc. including all leads and lift complete in all respect as per direction by Engineer-in-Charge. |
| 4 | Providing and fixing PVC Panel NW-319 Size 160 x 23 x 2900mm of approved quality with butt jointing and nails (frame work and cover fillets to be paid for separately). including all leads and lift complete in all respect as per direction by Engineer-in-Charge. |
| 5 | Providing and fixing alumiuium handles anodized transparent or dyed to required colour shade with necessary screws etc. including all leads and lift complete in all respect as per direction by Engineer-in-Charge. |
| 6 | Providing and fixing of Steel SS Hasp and staple Chapras including all leads and lift complete in all respect as per direction by Engineer-in-Charge. |
| 7 | Removing old paint or polish from wood and wood based surfaces with paint remover of approved brands and manufacture and making the surface even with :- Pait remover of approved brands and manufacture. including all leads and lift complete in all respect as per direction by Engineer-in-Charge. |
| 8 | Painting one coat (excluding priming coat) on previously painted steel and other metal surfaces with enamel paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter, sand papering & stoping: with white enamel paint. including all leads and lift complete in all respect as per direction by Engineer-in-Charge. |
| 9 | Polishing two coats with french polish on new wood and wood based surface to give an even surface including cleaning the surface of all dirt, dust and sand papered smooth including all leads and lift complete in all respect as per direction by Engineer-in-Charge. |
| 10 | Providing linolium covering to floor plain or coloured laid with an approved adhesives on sub-floor including cutting and fixing complete to sub-floor including damp proofing including all leads and lift complete in all respect as per direction by Engineer-in-Charge. |
| 11 | Steel work welded in built up,sections, trusses and framed work,including cutting, hoisting, fixing in position and applying a priming coat of red lead paint: in Beams, joists, channels, angles, tee, flats with connecting plates or angle cleats as in main and cross beams hip and jack rafters, purlins connected to comman rafters and the like. including all leads and lift complete in all respect as per direction by Engineer-in-Charge. |
| 12 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partition etc. with PVC/Neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge (Cost of aluminium snap beading shall be paid in basic item). |
| 13 | Providing and fixing anodized aluminium work for door, window, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS:733 and IS: 1285 anodized transparent or dyed to required shade according to IS: 1868. (Minimum anodic coating of grade AC 15) fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at Top, bottom and sides with required PVC/Neoprene felt etc.Aluminium sections shall be smooth, restfree,straight, mitred and jointed mechanically where ever required including cleat angle, aluminium snap beading for glazing/panelling C.P.brass/stainless steel screws. All complete as per architectural drawings and the directions of Engineer-in-charge. |
| 14 | Distempering (one coat) with oil bound washable distemper of approved brand and manufacture and of required shade on decorated wall surface to give an even shade after thoroughly brushing the surface clean of all grease,dirt,loose pieces of scales including preparing the surface even and sand papered smooth. including all leads and lift complete in all respect as per direction by Engineer-in-Charge. |
| 15 | Providing and fixing plain square edged cover fillets ( beading ) 40mm x 12 mm section with wood screws in ceiling and lining including mitring at junctions. First Class Deodar wood. including all leads and lift complete in all respect as per direction by Engineer-in-Charge. Please Enable Macros to View BoQ information |
