|
| 1 | Removing old lime or cement plaster from walls including racking out joints 12mm deep and removing the debris with all leads and lifts and all labour T & P required for the work etc. complete in all respects. |
| 2 | Earth work in excavation of foundation in Hard soil including hard mooru, stoney earth, earth mixed with boulders (except sheet rock and boulders requiring blasting) with all leads and lifts for guard wall including dressing & levelling the bed and depositing the excavated earth at places away from work site with all leads and lifts including cost of all labour T&P required for the work etc. complete and as directed by the Engineer-in-charge. |
| 3 | Supplying & filling in foundation & plinth with sand in 23.5cm(9 inch) thick layers including watering & ramming with cost, conveyance, royalties, taxes of the materials & labour with T&P required for the work etc.,complete as per direction of Engineer-in-Charge. (Measurement will be taken on finished compacted section only) |
| 4 | P.C.C (1:4:8) in foundation and wall using 4Cm size clean hard black broken granite metal of approved quality from approved quarry including hoisting, lowering and laying in layers to the required level, ramming, watering, curing etc. complete including cost, conveyance, royalties and taxes of all materials and labour with T&P required for the work etc. complete as directed by Engineer-In-Charge. |
| 5 | Supplying all materials, labour, T&P and providing Plain cement concrete (1:2:4) using 12mm size (18mm not to exceed 25 percent) hard black broken granite chips of approved quality from approved quarry including hoisting, lowering and laying concrete, watering and curing including cost of all labour T & P royalties etc. required for the work as directed by the Engineer-In-Charge |
| 6 | Providing, lifting, hoisting and laying Reinforced cement concrete of M-20 grade as per approved designs and drawings having a minimum compressive strength (in work test) 200 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position complete as per direction of Engineer-In -Charge.Drain Bed |
| 7 | Drain wall |
| 8 | Drain Slab |
| 9 | Supplying, cutting, straightening coiled or bent up M.S. rods or Tor steel of SAIL (HYSD Fe-415) welding or jointing if necessary, bending, binding, tying the grills and laying in position as required for RCC works and hoisting, lowering and placing in position in all floors according to approved designs and drawings including cost, conveyance, taxes of M.S. rods or Tor steel and binding wires of 18 to 20 gauge required for the work and cost of all labour, sundries, T&P etc. complete in all respect as directed by the Engineer in Charge. |
| 10 | Fly Ash Brick Masonary in cement mortar (1:6) in superstructure using Fly Ash bricks of 25cm x 12cm x 8cm size having a crushing not less than 35kg per Sq.Cm, including splays cutting, circular moulding, chamfering, corbelling, watering and curing including cost, conveyance, royalties, taxes of all materials and labour with T&P required for the work etc. complete in all respect in all floors. |
| 11 | 12mm (1/2 inch) thick cement plaster (1:6) finished smooth to brick work after racking out joints including watering and curing, cost, conveyance, royalties and taxes of all materials, labour with T&P required for the work etc. complete in all respect in all floors |
| 12 | 6mm thick ceiling plaster (1:4) finished smooth to rcc surface after racking out joints including watering and curing, cost, conveyance, royalties and taxes of all materials, labour with T&P required for the work etc. complete in all respect in all floors. |
| 13 | Providing and laying Vitrified flooring tiles 600x600 mm (thickness to be specified by the manufacturer) 1st quality of NITCO, SOMANY, ASIAN, KAJARIA or equivalent approved make, colours & shades laid on 20 mm thick cement mortar 1:4 (Icement: 4coarse sand) including pointing the joints with white cement and matching pigments, etc. complete as per direction of Engineer-ln-Charge at all floors and all heights. |
| 14 | Fixing tiles of vitrified 60x120cm of plain ivory in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including rubbing and polishing complete excluding cost of precast tiles. complete as per direction of Engineer-ln-Charge at all floors and all heights. |
| 15 | Supplying, fitting & fixing of M.S. door, Grills for window and gate with angle iron frame of approved design in proper position and making good to the damages to wall or RCC structure including mending or cutting to sizes or grooves in walls and fixing with C.C (1:2:4) with cost, coveyance, royalties and taxes of all materials with all labour, T&P required etc. complete in all floors. |
| 16 | Supplying, fitting & fixing of Colour Sheet Roof and all fitting and fixtures.including fixing of ridges valleys windties etc. including cost of fitting complete in all respect and as per direction of Engineer-in-charge. |
| 17 | Providing , fitting and fixing of PVC Door including cost, conveyance, , cess and royalties of all materials with labour and T&P required for the work etc., complete in all respect as per direction of Engineer In Charge. |
| 18 | Supplying, fitting & fixing of window (sliding type made up aluminum section) 151-154,151-155, as windows frame section No.151-155, 151-153 and 151-167 as shutter frame with 5mm thick black glass as panel fitted with rubber beading including locking arrangement including all fitting including cost of materials all taxes labour T & P etc complete as per direction of Enginner -in charge. |
| 19 | 2.5 cm.(1 inch) thick grading concrete(1:2:2) over roof slab after chipping and cleaning the surfaces by wire brushing, laid to proper slope finished smooth including watering, curing, cost, conveyance of all materials such as 6mm size black hard granite crusher broken chips, sand, cement etc. and labour with T& P required for the work with all taxes and royalities etc. complete in all respect as per direction of Engineer in charge. |
| 20 | Finishing wall surface of wall with wall putty (Water based) of approved make and finished smooth and even surface to receive paiting including cost of scaffulding stsging changes with cost of all materials labour etc complete in all respect as per direction of Engineer In Charge. |
| 21 | Painting 2(Two) coats with any approved Plastic Emulsion paint over a coat of primer to wall surface after cleaning the surface including cost of P.E Paint Cost,Coneyance, of all materials and labour with T&P required for the work etc. comple te in all floors complete in all respects as per the direction of engineer incharge. |
| 22 | Finishing wall surface with Weather Coat two coats over a coat of primer with any approved shade including cost, conveyance, , cess and royalties of all materials with labour and T&P required for the work etc., complete in all respect as per direction of Engineer In Charge. |
| 23 | Providing & Painting with synthetic enamel paint of approved brand over a coat of primer and manufacture to give an even shade as per the instruction of Engineer - In-Charge at all floors and all heights including all material & labour complete. |
| 24 | Providing and laying water proofs with polymeric bituminous membrane (Plastic felt) of 2.25Kg/Sqm and 2mm thickness consisting of layers having center core of 20 microns thermoplastic high molecular high density polyethylene H.M.H.D.P.E film of grade 2504 including priming the surface with bituminous primer @ 0.3Kg/Sqm providing a coat of hot blown bitumen of 1.32Kg/ Sqm, applying and laying plastic felt membrane with 10Cm overlap adhered to blow bitumen of 85/25 or 90/15 grade and covered with a layer of hot blown bitumen @ 1.2Kg /Sqm including Cost, conveyance, royality and taxes of all materials labour T & P required for the work etc complete in all respect as directed by the Engineer in charge. Please Enable Macros to View BoQ information |
