Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Dismantling Asbestos cement (Corrugated, semicororrugated , etc) sheets in roof covering including ridge complete all as specified and directed. |
| 2 | S & F Pre - painted galvalume aluminium zink coating GI based corrugated steel sheet 0.50 mm thick of any color having tensile stregth of 550 Mpa as in roof covering fixed to walls fixed with self tapping screws complete all as specified and directed. |
| 3 | S & F Pre - painted galvalume aluminium zink coating GI based plain steel sheet 0.50 mm thick of any color having tensile stregth of 550 Mpa as in roof covering/cladding fixed to walls fixed with self tapping screws complete all as specified and directed. |
| 4 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earthor broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed. |
| 5 | S & F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc to FE 410-W (Gde-E-250) quality -A complete all as specified and directed. |
| 6 | S&F MS flat iron wind ties for roof including securing bolts including all necessary drilling, bolting or riveting, etc. , and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 7 | M & L for preparing new steel and iron surfaces of any description over 10 cm in width or girth, priming with red oxide and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 8 | Dismantling ceiling boards any description, any thickness including cover fillets complete all as specified and directed. |
| 9 | Supply and fix anodised aluminium snap grid of size 605mm x 605mm frame work for false ceiling using 25x23x1.5mm tee both ways & wall angel of 35x25x1.5mm (wall angle to be fitted to walls by scewing on wooden plugs (inserted in wall at every 60 Cm c/c) and neatly sealed the cutting opening ) and including hangars 6 mm dia G.I (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long(all costs are included) complete all as specified and directed. |
| 10 | Supply and fixing of Non asbestos fibre cement building boards 4mm thick (lake and hill design) laid/inserted to timber/ Steel /aluminum frmework in repairs complete all as specified and directed. |
| 11 | M & L for PCC 1:3:6, type C2 (using 40mm graded stone aggregate) in foundation, filling and mass concrete etc complete and as directed by Engr-in-Charge. |
| 12 | Taking down cement plaster on brick or stone walls, ceilings, etc including racking out Joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 13 | M & L prepation of newly plastered wall surfaces and applying two coats of distemper oil-emulsion over a coat of primer over 3mm thick wall care putty on wall on wall complete all as specified and directed. |
| 14 | Demolition of brick work/ Stone masonery built in cement mortar or cement lime mortar complete all as specified and directed. |
| 15 | M & L for brickwork with subclass Flyash bricks, straight or curved on plan exc 6m mean radius built in Cement mortar 1:4 as in man holes complete all as specified and directed. |
| 16 | Dismantling floor, hearth or wall tiling including cement mortor bedding (but not backing to stone and rubbish off the premises complete all as specified and directed. |
| 17 | M&L for Screed bed or bedding layer of mortor 15 mm thick in CM 1:6 for laying floor finishes complete all as specified and directed. |
| 18 | M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces with CM 1:4 as in backing coat of skirting /dado complete all as specified and directed. |
| 19 | M & L for Non-skid coloured ceramic tiles 7 to 8mm thick (square / rectangular)dark shade area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set set in neat cement slurry and joint filling of tiles by using epoxy to match the surface all as specified and as directed by Engr-in-charge.. |
| 20 | All as per item No 28 above but as in skirting/Dado |
| 21 | M &L for coloured Vitrified Double Charge tiles 10 mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set in neat cement slurry and joint filling of tiles by using epoxy to match the surface all as specified and as directed by Engr-in-charge.. |
| 22 | M & L for Non-skid coloured ceramic tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface all as specified and as directed by Engr-in-charge.. |
| 23 | M & L Glazed coloured ceramic(Designer) tiles in vertical surface 450x250x7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface, including finishing of corners with PVC beading all as specified and as directed by Engr-in-charge.. |
| 24 | M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing (mirror polish) complete including Screed bed or bedding layer 15 mm thick of cement mortar 1:6 complete all as specified and directed. |
| 25 | M & L for Mirror polishing on marble/ granite/ Kota stone/ stone work wherever required to give high gloss finish complete all as specified and directed |
| 26 | S&F in repairs Wind operated Turbo Ventilators of size 24 inches dia with FRB base plate material of construction for ventilator is high grade Industrial Aluminium of thickness not less than 0.5mm. Material of construction of hardware is stainless steel -304. Bearing shall be steel in completely enclosed and dust proof integrated housing and aligned with each other, it shall have capability to rotate at nearly zero wind speed. Turbo ventilator shall have UV stabilized powder coated and capable of static balancing shall have high exhaust capacity and there shall not be any exhaust problem due to air block draft. Fixing arrangement shall have high quality rubberised hardware to prevent leak during rain. All Turbo Ventilator to be installed by manufacturer's auth person only. Contractor shall give no leakage guarranty for a period of three years from the date of installation of Turbo Ventilator all as specified and as directed.Make : M/S Turbo Ventilators, M/S SVS Wind Driven Turbo Ventilators, M/s Arven Turbo Ventilators. |
| 27 | Preparing old surface of wood and wood based material of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 28 | Preparing old surface of steel and steel based material of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 29 | M&L for Rendering in CM 1:6, 10mm thick on fair faces of brick work or concrete surfaces complete all as specified and directed. |
| 30 | Complete removal of existing treatment on old surfaces of wall and applying two coats of distemper oil- emulsion over a coat of primer over 2mm thick wall care putty on wall on wall all as specified and as directed . |
| 31 | M&L for Rendering in CM 1:4, 15mm thick on other than fair faces of brick work or concrete surfaces complete all as specified and directed. |
| 32 | M & L prepaeation newly plastered of wall surfaces and applying two coats of cement base paint over a coat of primer all as specified and as directed directed by Engr-in-charge. |
| 33 | Preparation of old treated of wall surfaces and applying one coat of cement base paint all as specified and as directed directed by Engr-in-charge. |
| 34 | M & L preparation of old wall surfaces and applying finishing with acrylic smooth exterior paint of approved shade all as specified and as directed directed by Engr-in-charge. |
| 35 | Taking down chowkhats or frames with shutter (with out taking off the shutters from the frames) size exc 1.50 sqm and not exc 4.00 sqm each and all as specified and directed. |
| 36 | Taking down shutters of any description n exc 1 sqm each all as specified and directed. |
| 37 | Taking down chowkhats or frames size not exc 1.50 sqm each and all as specified and directed. |
| 38 | Taking down shutters of any description exc 1.00 Sqm but not exc. 2 Sqm each all as specified and directed. |
| 39 | S & F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, suplying and fixing in opening as per specification and drawing etc complete all as specified and as directed by Engineer- in-Charge. |
| 40 | S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tube for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20mm width stuck in side with solvent cement for stiles and plain colour PVC sheet for top rial, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement , suppling & fixing in the frame at site as per specification & drawing etc complete all as specified and as directed by Engineer-in-Charge. |
| 41 | S&F 35mm thick IInd class hard wood ,Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 42 | S&F 35 mm thick ,IInd class hard wood, glazed and skelton shutters ;open rebated and prepared to receive glass, gauze, etc.(without sash bars), edges of framing plain, chamfered or rounded; fitted with mitred beads for securing glass wtc; size of members as specified in SSR part-I section 8, clause 8.24(a). |
| 43 | S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of apperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 44 | S &F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer- in-charge. |
| 45 | M & L for precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in cover slab for manhole, septic tank, etc, set in CM 1:6 including necessary form work, moulds, etc, complete all as specified and directed. |
| 46 | M&L for Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12 mmdia )holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors and complete all as specified and directed. |
| 47 | M&L Granite (of any type), 16- 18mm thick (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platform,WHB plateform and like in cement mortar (1:4) incl pointing in white cement (1:2) using marble dust with admixer of pigment to match with marble shade including making full curving the edges complete. all as specified. |
| 48 | M&L Rotational moulded polythene water storage tank of 1000 Ltrs capacity (three layer white colour) cylinderical vertical with closed top including 3 Nos GI check nuts and tank nipple of 25mm bore for inlet and outlet, 25mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball hoisted and fixed in position all as specified in SSR part -I including taking down of old unserviceable tank complete all as specified and directed. |
| 49 | S&F in repair vitreous China squatting pan Orissa pattern size 580 x 440mm white with integral foot rest ( excluding flushing cistern and flush pipe), including long Arm P-trap (CI) 100 mm dia of lenght up to 700 mm or as per site requirement ,complete including making good to floor complete all as specified and directed.Make : Cera/Prayag/Johnson Pedder. |
| 50 | S&F in repair 15mm dia brass chromium plated fancy type, sink cock with regulator with extension body with fly nuts capstan head screwed down high pressure with or Without lettered hot or cold with long scewed shank complete all as specified.Make: Jaquar Cat No.ARI 39347 S |
| 51 | Supply and fix in repair for corner glass shelf of size 300mm dia and 8mm thick with chromium plated railing, fixed with and including chromium plated bracket complete all as specified and as directed. |
| 52 | Supply and fix in repair for corner glass shelf of size 200 mm dia and 8mm thick with chromium plated railing, fixed with and including chromium plated bracket complete all as specified and as directed. |
| 53 | S&F in repair Cabinet mirror plastic body for toilet of size 350mmx450mm with 4mm thick looking mirror complete all as specified.Make : Prayag/Polytuff. |
| 54 | S&F in repairs Two Way bib taps with wall flange quarter turn suitable for 15mm bore pipe long body fancy type brass CP, screwed down screwed for iron pipe or brass ferrule complete all as specified. Make Johnson VIVA new series Cat part No: T4808C or of equivalent make as per Appx 'A' as approved by GE. |
| 55 | S&F in repair cast copper alloy CP shower arm square 230mm long with flange complete all as specified and directed by Engr-in-charge. Make : Johnson Cat part No: S0001C1 or of equivalent make as per Appx 'A' as approved by GE. |
| 56 | S&F in repair brass chromium plated shower rose 115mm size square (without arm) with swivel joints including fixing arm/ pipe all as specified. Make Johnson Cat part No: S0006C or of equivalent make as per Appx 'A' as approved by GE. |
| 57 | S & F in repair brass Chromium plated soap dish , fixed to wall with CP brass screws, all as specified and directed. or of equivalent make as per Appx 'A' as approved by GE |
| 58 | S&F aluminium anodised powder coated ventilator using rectangular tube of size 63.50 x 25 x 1.50 mm including 3.50 mm thick designer glass louvers and stainless steel wire mesh 0.36 mm nominal dia of wire, average width of aperture 1.40 mm using ‘Jindal” aluminium section with provision for exhaust fan complete all as specified and directed by Engineer-in-Charge. |
| 59 | Supply and fix for aluminium powder coated three track sliding window with two glazed shutters with 4mm thick float glass ordinary quantity and one shutter of stainless steel wire mesh 0.36 mm dia wire and 1.40mm aperture including good quality of bearing handle, locks, PVC rubber lining etc complete all as specified and as directed. Catlouge numbers of Jindal company or equivalent make complete all as specified and directed. Sections of Jindal company : Three track bottom – 20957, Three track top/vertical – 20958,Handle – 20606, Interlocking – 20605, Top and bottom – 20604. |
| 60 | Demolition of RCC slab roofs, floors (other than ground floors), beams, staircases, landing,chajjas and similar suspended work complete all as specified and directed |
| 61 | M&L for RCC (Nominal mix) Type B1 1:2:4(20mm graded crushed stone aggregate) slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and directed |
| 62 | Use & waste for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work;not exc 200mm thick(Horizontal or sloping) complete all as specified and directed |
| 63 | Supply and fix for 35mm thick flush shutters solid core construction, with block board core and plywood face panels, commercial type on both sides including second class hard wood plain cover fillets 35X6mm all around the shutters including two coat of synthetic enamal paint over one coat of pink primer complete all as specified and directed. |
| 64 | S&F Solid PVC Wall Lining consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing. |
| 65 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing. |
| 66 | S & F 18 mm thick UV coated exterior grade MDF board duly edge banded with 0.8 mm thick PVC taping, fitting of shutters shall be fixed as approved by GE suitable for cup board etc. including taking down with existing one complete all as specified and directed. Make: Action tesa, Century, Kitply |
| 67 | S&F in replacement 75/100mm bore PVC (SWR) floor trap plain with CP grating including jointing with solvent cement to waste pipe fixed in cement concrete typeB-1, 1:2:4 using 20mm graded stone aggregate complete all as specified. |
| 68 | S&F in repair chromium plated gratings 100mm dia with drain hole all as specified and directed Make: ISI Marked or of equivalent make as per Appx'A' as approved by GE |
| 69 | S&F in repair 110mm bore PVC cowl |
| 70 | S&F in repair 75mm bore PVC cowl |
| 71 | Dismantling of boarding , any description , fixed in any position with nails including battens etc all as specified. |
| 72 | M& L 2nd claas hard wood plain fillets square/ rectangular or triangular in section, wrought secured with nails or brads sectional area exc 13 & not exc 25 sqcm. |
| 73 | M&L for 18mm thick ,solid, decorative type, WPC (Wood Polymer Composite) board, for kitchen cabinet and drawer,comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water / moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on edges and fixing with necessary full body threaded star headed counter sunk S.S screws, etc all as per direction of Engineer- In- Charge. (Note: hinges shall be paid separately) |
| 74 | S & F Cupboard/Shelves made of HDHMR (high density high moisture resistance) board manufactured with hard wood, prelaminated both sides white in colour 18 mm thick water resistant, termite resistant, duly edge banded with PVC taping 0.8 mm thick, cut to shape & size of shelves including taking down with existing one complete all as specified and directed. Make: Action tesa, Century, Kitply |
| 75 | S & F soft close telescopic drawer channel, 550mm length, sidemount type, suitable for weight upto 35 Kg all as directed by Engr-in-charge. |
| 76 | S & F Stainless steel drawer handle ,100 mm size, decorative type fixed with SS screws all as specified and directed by Engr-in-charge. |
| 77 | S & F SS Auto soft closing concealed cabinet hinges, bright finish or electrogalvanised, |
| 78 | S & F Stainless steel drawer /cabinet chest pull/kadi handle ,75 mm size, fixed with SS screws all as specified and directed by Engr-in-charge. |
| 79 | M&L PCC (1:4:8) type D-2 ( 40 mm graded stone aggregate) as mass concrete as in foundation, mass concrete work. |
| 80 | M&L hardcore of gauge not exc 63 mm deposited spread and leveled in layers not exc 15 cm thick watered and rammed to a true surface . |
| 81 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine crusher/M sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. |
| 82 | M&L for chequered cement concrete tiles 25cmx25cmx25mm thick , with grey cement and pigment set jointed and pointed in neat cement slurry in floors including 20 mm thick screed bed or beding layer in cement mortar 1:6 complete all as specified |
| 83 | M&L for Sand / M Sand filling under floors or in foundations including watering and consolidation Spreading and levelling in layers n exc. 25 cm thick and all as specified and directed . |
| 84 | M&L cutting chases pinning in brick work for concealing water tubing and making good to facing where required and pointing in cement motar 1:3, cutting n.exc. 10cm girth all as specified. |
| 85 | M & L Cutting holes in brick walls built in cement mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required Depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall exc half brick but not exc one brick complete all as specified and as directed. |
| 86 | M&L Second class hard wood plain, solid, straight Chowkats and frames, wrought, framed, double rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. |
| 87 | M&L Preparation of new wood or wooden surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed |
| 88 | S & F 150 mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed |
| 89 | Supply and fixing 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 90 | Supply and fixing 100mm long Butt hinges medium weight cold rolled stainless steel, and fixed complete all as specified and as directed. |
| 91 | Supply and fixing Floor door stopper of aluminium alloy body and tongue anodized with hard drawn steel spring fixed in floor overall 140mm complete including taking down existing one all as specified and as directed. |
| 92 | S&F in repairs Mild steel 300mm long ordinary rat tail rod pattern springs including roller and roller plate complete and all as specified and directed |
| 93 | S&F 300mm long Aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy complete and all as specified and directed |
| 94 | S & F in repair PVC connections 15 mm size with PTMT nuts of length 450 mm |
| 95 | Waste coupling of 32mm PTMT(half or full threaded) (Minimum weight 32mm-45gms/40mm-60 gms) |
| 96 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames/steel frames glazed with putty or fixed with beads |
| 97 | Material and labour for provision of new 4mm plain sheet glass ordinary quality and glazed with oil putty area of glass not exc 0.5 sqm each pane complete all as specified and directed. |
| 98 | Material and labour for provision of new 4mm plain sheet glass ordinary quality and glazed with oil putty area of glass exc 0.5 sqm each pane complete all as specified and directed. |
| 99 | S&F of 3- layer PP-R Polypropylene random copolymer) concealed Outer diameter of pipes in 32 mm dia SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water apply all PP-R plain & brass threaded polypropylene random fittings laid in floors,wall and ceilling in repairs etc |
| 100 | S&F of 3- layer PP-R Polypropylene random copolymer) concealed Outer diameter of pipes in 15 mm dia SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water apply all PP-R plain & brass threaded polypropylene random fittings laid in floors,wall and ceilling etc in repairs. |
| 101 | S&F of 3- layer PP-R Polypropylene random copolymer) concealed Outer diameter of pipes in 20 mm dia SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water apply all PP-R plain & brass threaded polypropylene random fittings laid in floors,wall and ceilling etc in repairs. |
| 102 | S&F of 3- layer PP-R Polypropylene random copolymer) concealed Outer diameter of pipes in 25 mm dia SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water apply all PP-R plain & brass threaded polypropylene random fittings laid in floors,wall and ceilling etc in repairs.Note for item No :-(a) The unit rate shall be include for taking down existing pipe and connections and all fittings as directed.(b) The unit rate shall include the cost of short lengths, with all pipe fittings such as bends, tees, short pieces connectors, elbows, reducers, unions, sockets etc and fixing accssories such as pipe hooks, screws clamps etc |
| 103 | M&L UPVC pipe of pressure 10 kgf/cm 2 suitable for water supply distribution incl all fittings,20 mm dia |
| 104 | M&L UPVC pipe of pressure 10 kgf/cm 2 suitable for water supply distribution incl all fittings, 15 mm dia |
| 105 | S&F 25 mm dia SS drapery rod , including brackets, decorative knobs at both ends & curtain rings 8 Nos (minimum) complete all as speccified and directed. |
| 106 | supply only integral water proofing compound complete all as specified and directed. Make ;- Dr. Fixit pidi proof and equivalent. |
| 107 | M & L prepaeation newly plastered of wall surfaces and applying two coats of acrylic smooth exterior paint of required shade (applied @ 1.67ltr/10 Sqm) over and including priming coat of exterior primer @2.20 Kg/10 Sqm) all as specified . |
| 108 | M & L prepation of newly plastered wall surfaces and applying two coats of distemper oil emulsion over over a coat of primer over 3mm thick wall care putty on wall all as specified and as directed . |
| 109 | M & L for PVC (SWR) multi floor trap of 75mm dia with grating including jointing with solvent cement etc complete, |
| 110 | M & L for PVC (SWR) gully trap of 125/110mm dia includingsetting jointing with solvent cement etc complete, |
| 111 | S & F Unplasticised PVC pipe 50mm dia of pressure rating 10 kgf /cm2 fixed complete to walls, ceiling or in floors etc complete |
| 112 | S & F PVC (SWR) pipe 110mm dia single sockted in any length with rubber ring joints fixed to wall complete all as specified and directed. |
| 113 | S&F PVC (SWE) bends 110mm radius complete all as specified and directed. |
| 114 | M&L for flat formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. for rough finished surfaces of concrete. |
| 115 | M&L for TMT bars 10 mm dia over cut to length,bent to shape required ,including cranking ,bending spirally for hooping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia. |
| 116 | All as above, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders |
| 117 | S&F 110 mm bore PVC (SWR) vent cowl |
| 118 | S&F of Bands, straps, supports or stays for rainwater, ventilating pipes,including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to fe 290 grade E165 |
| 119 | M&L 25 mm thick cement concrete type B-0,1:2:4 (12. 5mm graded aggregate) as in sub base of floors all as specified. |
| 120 | M& L for Factory made single extruded WPC (Wood S&F Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65X 150mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp- ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 121 | M& L for Factory made single extruded WPC (Wood S&F Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp- ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 122 | S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicityindex of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face)& 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 123 | S&F in repairs vitreous china wash down water closet pan (Pedestal pattern), white including seat cover and flush pipe fixing to existing 125/110mm size PVC (SWR) P trap etc complete all as specified and as directed by Engineer-in-Charge. |
| 124 | S&F in repairs brass chromium plated health faucet with hand held and spring operated control valve with PVC flexible pipe connection of suitable length as directed fixed to 15 mm bore pipe. |
| 125 | S & F in repairs PVC valveless, syphonic action type, flushing cistern of 10 Ltrs capacity , low level , white, with inlet , ball valve, float and handle including brackets and flush pipe etc complete all as specified and as direted by Engineer-in-Charge. |
| 126 | S& F in repair Vitreous China wash basin, white, flat back, size 450x300mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specifed and directed. |
| 127 | S&F in repairs Pillar taps fancy type cast copper alloy, with capstain head, chromium plated screwed down high pressure, with long shanks and fly nuts screwed for iron pipe and fixed 15 mm bore. |
| 128 | S & F PVC connections 15 mm size with PTMT nuts of length 450 mm |
| 129 | S & F in repairs towel rail 60cm long of brass chromium plated fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 190 gms). |
| 130 | S&F in repairs Bib taps, brass chromium plated fancy type with cruch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed for 15mm bore. |
| 131 | S&F in repairs chromium plated angle valves, cast copper alloy, screwed down high pressure with crutch or butterfly handles screwed both ends for iron pipes or for unions and fixed. 15 mm size. |
| 132 | S&F in repairs 125mm dia shower rose brass chromium plated with or without seivel joints, including fixing to steel pipe or union complete all as specified and directed. |
| 133 | S&F in repairs chromium plated stop valves concealed type , cast copper alloy, screwed down high pressure with crutch or butterfly handles screwed both ends for iron pipes or for unions and fixed. 15 mm size. |
| 134 | S&F in repairs sinks made of stainless steel 1mm thick kitchen sink with plugs, washers and wastes pipe , including bedding in cement mortar on to dward wall or including fixing cantilever brackets and connection union to pipe, overall size 492X420mm bowl size 410mmX330mmX160mm complete all as specified and directed. |
| 135 | Demolition of concrete in above ground floors and pavings n. exc 15 cm thick |
| 136 | Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi- chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. |
| 137 | M & L for Framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 - |
| 138 | M & L for preparing new steel and iron surfaces any description over 10 cm in width or girth, priming with red oxide and applying two coats of synthetic enamel paint. |
| 139 | S&F 600mm x 450mm bevelled edge looking mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers. |
| 140 | S&F 6mm thick frame less bevelled edge mirror fixed with steel stud Including taking down existing one complete all as specified and as directed by Engineer-in-Charge. |
| 141 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sqm on plan and not exceeding 1.5 m in depth and getting out in hard / dense soil. |
| 142 | M & L for brickwork with subclass Flyash bricks, straight or curved on plan exc 6m mean radius built in Cement mortar 1:4 as in man holes all as specified and directed. |
| 143 | M & L for PCC type D 2 1:4:8 (using 40 mm graded stone aggregate) Cement concrete in foundations, filling and mass concrete all as specified and directed. |
| 144 | M & L for PCC 1:4:8 type D2 ( using 40 mm graded stone aggregate ) Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in 150 mm bore pipes complete all as specified and directed. |
| 145 | M & L for PCC 1:2:4 type B2 (using 40 mm graded stone aggregate) Cement concrete in surface channels and drains complete all as specified and directed. |
| 146 | M & L for precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in cover slab for manhole, septic tank, etc, set in CM 1:6 including necessary form work, moulds, etc, complete all as specified and directed. |
| 147 | M & L for 15 mm thick Rendering in CM 1:4 on fair faces of brick wall surfaces finished even and smooth without using extra cement. |
| 148 | S&F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips. |
| 149 | Demolition and breaking up drain pipes of 150 mm internal dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortar. |
| 150 | S & F 160 mm bore UPVC (SWR) pipes single sockted in any length with rubber ring joints laid in trenches complete all as specified and directed. |
| 151 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm as in soil complete all as specified and directed. |
| 152 | Removing excavated material exc. 1.50 km but n exc. 5 km and depositing where directed and all as specified. |
| 153 | M&L for extra for farming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms moulds ,mitred stopped ends etc. |
| 154 | M&L for PCC 1:3:6, type C1 (using 20 mm graded stone aggregate) for coping and benching inside the manholes including weathering, slightly rounded or chamfered angles and throating and including necessary formwork complete all as specified and directed. |
| 155 | Removing building material exc 1.50 Km and not exc 5.00 Km out side the MD land including loading and unloading etc., where responsibility regarding place of deposition and obtaining permission from all authorities etc., in this regard will be of contractor and all as specified. |
| 156 | Material and labour for point wiring using approved colour coding as per IS ,with multistranded copper conductor 1.5 Sqmm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade ISI-694 marked drawn through in and including heavy duty PVC concealed conduit including all accessories, Metal flush box of suitable module, with earth dolly, covered with twin colour (specified by Engr-in- Charge)modular white cover plate & frame after chasing in brick masonry walls etc for accomodating modular switches, sockets, regulators etc including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor along with wiring and connecting to earth dolly, providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures all as specified and as directed for the following (Make- Finolex/ ANchor/ Grandlay/ Polycab/L&T) |
| 157 | One light / wall / exhaust fan point controlled by one, one way switch 6 Amps complete all as specified and as directed |
| 158 | One ceiling fan point controlled by one, one way switch 6 Amps and regulatorNote : PVC Casing caping / Pipe of size as required at site on surface of ceiling (only for fan point) in lieu of concealed is permitted and is deemed to be included in the unit rate quoated. |
| 159 | One 5 pin socket outlet plug point, 6 Amps, controlled by one, switch on same board complete all as specified and as directed |
| 160 | One 5 pin socket outlet plug point, 6 Amps, controlled by one, switch on independent board complete all as specified and as directed |
| 161 | Description all as per 156 here-in before but using 2.5 Sqmm single core copper conductor FRLS cable of multistranded PVC insulated unsheathed 1100 Volts grade for one 6 pin socket outlet plug point,16 Amps independent including necessary running of 2.5 Sqmm PVC insulated multistranded copper conductor single core FRLS cable as earth continuity conductor along with wiring and connecting to earth dolly providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures all as specified and as directed |
| 162 | Supply and fixing Modular Switch - 6 Amps, Single pole one way, one module complete all as specified and as directed. (Make:Anchor/Roma/Havells/Legrand/Indoasian) |
| 163 | Supply and fixing Modular Switch - 16 Amps, Single pole one way, one module complete all as specified and as directed. (Make:Anchor/Roma/Havells/Legrand/Indoasian) |
| 164 | S & F Modular socket outlet multipurpose 6 Amps, 5 pin, 2 module, complete all as specified and as directed. (Make:Anchor/Roma/Havells/Legrand/Indoasian) |
| 165 | S & F Modular socket outlet multipurpose 16 Amps, 6 pin-shuttered type, 2 module, complete all as specified and as directed. (Make:Anchor/Roma/Havells/Legrand/Indoasian) |
| 166 | Supply and fixing modular fan step regulator, 120W - 2 module suitable for ( 48\\" & 56\\" fans) supply complete all as specified and as directed. |
| 167 | S & F Ceiling rose, 3 phase / PVC / polycarbonate, complete all as specified and as directed |
| 168 | S&F for Lamp holder, PVC/ Polycarbonate type with back plate suitable for angle/batten fitting completes all as specified. |
| 169 | Supply and fix in repair for wall mounted LED 18/20watts with lumens out put not less than 2000 lumens white/ warm white, box type (decorative) light fitting, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED tube 4' x 20watts complete all as specified and as directed. Make: Halonix Cat part No HLB-03-18-CW-AL Bajaj Cat No. BCLAB 20W, JAQUAR Cat part No LGLZ01X020XN or equvalent of make Philips/ as approved. |
| 170 | S & F in repair for wall mounted 18 watts indoor Inverter batten with opal diffuser, IP 20, with 4 hrs back up with out put of 1800 lumens , box type (decorative) light fitting, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED tube 4' x 18 watts complete all as specified and as directed. Make :- Halonix Cat part No. LED INVERTER BATTEN HLB-08-18-CW-INV or equivalent Philips |
| 171 | S & F in repair for recess mounted 2' x 2' luminaire to enhance the delight of occupants with comfortable experience through its classic design & glare free sift illumination square LED panel 36 watts, white/Warm White powder coated CRCA housing with full window acrylic diffuser giving a complete full glow look, operating voltage 140 volts - 270 volts, AC, 50 Hz complete all as specified and as directed. Make- JAQUAR Ultima Ultra Cat Part No LULTSLS036XN or its equivalent in Havells/ Bajaj/ halonix Cat No HLFPR22-07-36-CWL-R |
| 172 | Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection completecomplete all as per Make JAQUAR, Bajaj, Philips, Havells as approved. |
| 173 | Supply & fix in replacement for Decorative wall mounted luminaire with opal glass with E27 lamp holder complete all as specified and as directed. Make- Jaquar Cat part No - JNL-CHR-WLSL-55004E27 , havells FLORETTE 1LS E27 SS, HALONIX HLWB-01-E27. |
| 174 | Supply and fix in repair LED Lamp warm white/ amber 7 Watt highly efficient of make Havells /Bajaj/Philips all as specified and as directed. |
| 175 | Supply and fixing ceiling fans working on single phase input voltage 140-285 , Sweep- 1200 mm, Power 32 W, 345 RPM , with 232 Air delivery CMM (m3 /min), complete with compact BLDC Motor, blades, down rods, electronic regulator and accessories, including making connections with provision of flexible wire 23 /0.0076 twin core copper conductor from ceiling rose/connector to fan complete all as specified & as directed.Make : Bajaj/ Usha or equivalent |
| 176 | S & F for plastic body exhaust fan, AC single phase, 240 V of size 200 mm sweep with louvers (of Make Indo Asian or equivalent Make- Bajaj Maxima DX/ Usha Crispair/ Havells )including necessary connection and replacement of flexible copper cable from ceiling rose and taking down of old unserviceable fan complete all as specified and as directed |
| 177 | Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and directed by Engr-in-Charge. Make Bajaj /Usha /Recold/Havells/Crompton |
| 178 | Supply and fix MCB Protected SRCD box 4 module 25 Amps with surface mounted PVC enclosure SRCD(socket residual current device) single pole with a three pin socket & top complete with 25 Amps MCB single pole. Make: Havells Cat part No DHDDCDP025202503 OR Equivalent C&S/Indo Asian/L&T/Bajaj/Legrand |
| 179 | S & F in repair for sheet metal enclosure MCB DB TPN 415 volts, IP 43 of 4 way made of CRCA sheet steel, powder coated provided with insulated phase busbars, neutral bar, shrouds, earth bars, cable ties, blanking plates and circuit identification labels with necessary electrical connection, double door with locking system including cement work for inserting the DBs for mounting in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.Make: L&T Cat Part No DBTPE004DD or in equavalent in Legrand, C & S,ABB, Schneider |
| 180 | S & F sheet metal enclosure MCB DB SPN 8 way with 100 Amps rated bus bar 240 Volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonary etc and making good of disturbed surface to match the existing colour of wall complete all as specified and as directed |
| 181 | S & F for MCB TPN rated capacity 63 Amps, 415 Volts breaking capacity 10 KA complete all as specified and as directed. L&T/Legrand/C & S/Schneider/ABB/Indo Asian/Havells |
| 182 | Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SP 5 To 32 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning |
| 183 | Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SPN 32 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning |
| 184 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. |
| 185 | S & F submain wiring with 2 single core (FRLS) PVC insulated unsheathed multistranded flexible copper conductor cable, of 4.0 Sqmm and one single core 4.0 Sqmm flame retardent low smoke (FRLS) PVC insulated, unsheathed, multistranded, flexible copper cable as earthing lead , all as per IS 694/1990 drawn through including concealed in brick masonary PVC conduit and conduit accessories heavy duty ISI marked, providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures all as specified and as directed all as specified and as directed complete all as specified and as directed. Note :- ( Two runs of main copper wire, one run of earth wire cable & PVC conduit shall be measured together as one length). |
| 186 | All as per item No 181 but of size 1.5 Sqmm |
| 187 | M & L for Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion |
| 188 | Note : 1. Rerformance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site. Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
