|
| 1 | Dismantling Single layer Mangalore Pattern or similar tiles in roofing and rubbish off the premises complete all as specified and as directed. |
| 2 | Material and labour for roof tiles Mangalore pattern interlocking at side joints, laid dry in roofing complete all as specified and as directed. |
| 3 | All as per serial item No 2.00 here-in-before but using Mangalore pattern roof tiles obtained from dismantling. |
| 4 | Material and labour for ridge or hip tiles to suit Manglore pattern of roofing tiles,bedded and jointed in cement mortar (1:4) etc complete all as specified and as directed. |
| 5 | Dismantling tile battens, spaced at spacing exc 15cm centres to centres fixed with nails complete all as specified and as directed. |
| 6 | Dismantling wooden scantling of section n.exc. 40 sqcm and over at any position complete all as specified and as directed. |
| 7 | Material and labour for Second class hard wood, clean sawn, in scantling as in timber work complete all as specified and as directed. |
| 8 | S & F of mild steel work as in Roof battens etc and similar work complete using ERW or induction butt welded tubes conforming to IS1161-1998 grade ST.-240, fixed independently shelf tapping screw and in iron cleats etc complete all as specified and as directed. |
| 9 | M&L for preparation of New steel surfaces of any description over 10cm girth or width and applying Two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 10 | Dismantling plain or corrugated steel sheeting , any gauge or any thickness, as in roof coverings complete all as specified and as directed. |
| 11 | Supply and fix for 0.63mm thick galvanised,plain mild steel sheeting with two corrugations side lap, fixed with 'J' Bolts and washers, in roofs, walls etc with grade of zinc coating 120gms/ Sqm complete all as specified and as directed. |
| 12 | Supply and fix for 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with 'J' Bolts and washers, in roofs, walls etc with grade of zinc coating 120gms/ Sqm complete all as specified and as directed. |
| 13 | M&L for PCC (1:2:4) type B1 (using 20mm graded stone aggregates) as in roof kerbs or mud stops rounded or chamfered on edges and as in Coping and similar work complete all as specified and directed. |
| 14 | Material and labour for 12 to 12.50mm thick PVC laminated mineral board false ceiling board of size 600 mm x 600 mm on and including GI powder coated grid work with using 32mm x 23.5mm x 1.5 mm thick main tee, 23.5 mm x 23.5 mm x 1.28 mm cross tee and 23.5mm x 23.5mm x 1.5mm angle fixed to wall for false ceiling including necessary supporting hanger with 2.0mm dia GI wire with double layer and 'J' bolts washer nuts for securing frame work to ceiling, suspended @ 120 cm C/C both ways, size of grid shall be 605 mm x 605 mm including dismantling of ceiling board of any description and any thickness including cover fillets/ grid etc. Including dismantling existing complete all as specified and as directed. Make :- Armstrong, Diaken, New Age (ACE). Note: Height of ceiling is above 5 metres. |
| 15 | Material and labour for preparation of old treated plastered or unplastered surfaces of wall by removing all loose paints etc removing nails ,applying birla putty whereever required, smoothen the surface with sand paper and finally applying one coat of acrylic distemper complete all as specified and as directed. |
| 16 | Dismantling of stone slabs,cudappah, of any description or thickness in floor/fixed to walls, apron etc laid bedded and pointed in cement mortar complete all as specified and as directed. |
| 17 | M&L for Machine cut kota stone 20-25mm thick over cement screed bed 20mm thick in CM (1:4) laid and jointed with grey cement slurry and pointed with grey cement and pigment to match the shade of the slab including rubbing and polishing complete (mirror polish) as in flooring/treads /slabs complete all as specified and as directed. |
| 18 | M&L for Machine cut kota stone 20-25mm thick over 10mm thick backing coat in CM (1:4) laid and jointed with grey cement slurry and pointed with grey cement and pigment to match the shade of the slab including rubbing and polishing complete (mirror polish) as in riser of steps/Skirting/dado and pillar complete all as specified and as directed. |
| 19 | Material and labour for 18 to 20mm thick granite (of any type) work ( table rubbed and polished) in steps , jambs. pillars, window cills, cooking platforms and any other platform like in cement mortar (1:4) over and including 10mm thick backing coat in cement mortar (1:3), pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including cutting, edge moulding, full curving the edges complete all as specified and as directed. |
| 20 | Taking down cement plaster on brick/ stone walling including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed. |
| 21 | Material and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of on stone wall or brick work or concrete surfaces and finished even and smooth without using extra cement all as specified and as directed. |
| 22 | M&L for preparation of new plastered wall surface of any description, width or girth, and applying two coats of OBD over a coat of primer complete all as specified and as directed. |
| 23 | M/L for 15mm thick cement plaster in CM 1:4 on brick or concrete surfaces finished even and smooth without using extra cement as specified and directed. |
| 24 | Dismantling of stone masonry built in cement mortar and in any position complete all as specified and as directed. |
| 25 | M & L stone walling of Random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 including cemet pointing with CM 1:4, complete all as specified and as directed. |
| 26 | M&L for Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and as directed. |
| 27 | S&F for aluminium powder coated three track sliding window with two glazed shutters with 4mm thick float glass ordinary quantity and one shutter of stainless steel wire mesh 0.36 mm dia wire and 1.40mm aperture including good quality of bearing handle, locks, PVC rubber lining etc complete all as specified and as directed. Catlouge numbers of Jindal company or equivalent make complete all as specified and directed. Sections of Jindal company : Three track bottom – 20957, Three track top/vertical – 20958,Handle – 20606, Interlocking – 20605, Top and bottom – 20604. |
| 28 | M&L Bees-wax polishing on old marble/stone surfaces of any description, width or girth including cleaning the stone complete all as specified and as directed. |
| 29 | M&L two coats of synthetic enamel paint on new wooden surface including preparation complete all as specified and directed. |
| 30 | M&L Eves/Weather Boarding of AC Sheet 12 to 15mm thick, any size and shape including taking down existing board all as specified and as directed. Make: Shera wall/Everest/ V-board/Charminar or Eqvt. |
| 31 | M&L Brick work with fly ash bricks, conforming to IS- 12894:2002, Non modular, class designation 75, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 etc complete all as specified and as directed. |
| 32 | Note : 1. Performance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site. Please Enable Macros to View BoQ information |
