|
| 1 | Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottom lift up to 1.5m including back filling available earth in rooms and disposal of surface earth as per direction of site engineer . |
| 2 | Providing and laying of stone soling/boulders (Hand Packed) including ramming, dressing and watering and carriage up to site. |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work up to plinth level. 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal) crushed incl all carriages |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work up to plinth level. 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate20mm nominal) crushed incl all carriages |
| 5 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering. shuttering, finishing and reinforcement-All work upto plinth Level. 1.1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) incl all carriages |
| 6 | Reinforcement of R.C.C work including straightening, cutting, bending, placing in position and binding all complete with TMT Bars. |
| 7 | Brick work with FPS bricks of class destination 75 in super structure above plinth up to floor 5th level in cement mortar 1:6 mix (1 Cement : 6 Fine Sand). Incl all carriages |
| 8 | Centering and Shuttering including strutting and propping etc and including removal of same .Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 9 | 15 mm plaster in 1:4 mix on brick masonary walls incl all carriages |
| 10 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): imported KD wood including priming coat and applying synthetic enamel paint of approved brand. |
| 11 | Providing and fixing 30mm thick paneled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws incl fixing panes. incl 4.0 mm thick glass panes and MDF Board Panneling for door shutters, 150mm Tower bolts, Aldrops Handles CJ Using KD wood including priming coat and applying synthetic enamel paint of approved brand. |
| 12 | Cement concrete flooring 1:2:4 (1cement: 2coarse sand 4graded stone aggregates) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc complete using 40mm thick 20mm nominal size crushed aggregates. |
| 13 | Apply primer coat on wood work of good quality complete job as per directions of site engineer . |
| 14 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work |
| 15 | Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete |
| 16 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) |
| 17 | Filling available excavated earth into the trenches of the plinth complete job as per site engineer |
| 18 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 19 | Providing and fixing of 8 mm thick plywood in celing incl frame work of budloo wood 3x3 joists of required sections cost of cornices with nails beading etc complete job |
| 20 | Providing 0.5 mm thick color coated Hi Rib sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 21 | Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete 0.50 mm thick color coated |
| 22 | Providing and fixing of following hardware items fo fitting purposes |
| 23 | Handle 100mm |
| 24 | Towerbolt 150 mm |
| 25 | Towerbolt 100 mm |
| 26 | Handle 150 mm |
| 27 | L drops 250 mm |
| 28 | Hooks |
| 29 | Providing and fixing of 4mm thick glass panes incl beading complete job Please Enable Macros to View BoQ information |
