|
| 1 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth anddisposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil : |
| 2 | Supply and Filling of Dry Stone Soiling in foundation, Trenches hand packed Tightly including all Carriuage Complete Job. |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size crushed aggregate) including all Carriage complete |
| 4 | Providing and laying in position Reinforced cement concrete of specified grade including curing but excluding the cost of centring and shuttering.and reinforcement All work upto plinth level with: 1:1.5:3(1 cement : .1.5coarse sand :3 graded stone aggregate 20 mm nominal size crushed aggregate ) including all Carriage complete |
| 5 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size crushed aggregate ) including all Carriage complete |
| 6 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand) including all Carriage complete |
| 7 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size crushed aggregate) including all Carriage complete |
| 8 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing inposition and binding all complete in Sub-Structure and Super Structure Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 9 | Providing wood work in frames of doors, windows, clerestory windows andother frames, wrought framed and fixed in position with hold fast lugs or withdash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid separately) using imported KD wood including priming coat and applying synthetic enamel paint of approved brand complete |
| 10 | Providing 40x5 mm flat iron hold fast 40cm long including fixing to frame with 10mm diameter bolts , nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( cement ,3 coarse sand : 6 graded stone aggregate 20mm nominal size crushed aggregate ) complete |
| 11 | Providing and fixing 30mm thick panelled and glazed shutters for doors,windows and clerestory windows including ISI marked M.S pressed butt hings bright finished of required size with necessary screws including fixing panes including 400mm thick glass panes and MDF board panelling for doorshutters .150mm tower bolts , Aldrops Handles CJ using KD wood Including priming coat and applying synthetic enamel paint of approved barnd , all complete as per direction of Engineer-in-charge. |
| 12 | Providing and fixing 30mm thick wire guage shutters for doors,windows and clerestory windows including ISI marked M.S pressed butt hings bright finished of required size with necessary screws .150mm tower bolts , Aldrops Handles CJ using KD wood Including priming coat and applying synthetic enamel paint of approved barnd , all complete as per direction of Engineer-in-charge. |
| 13 | Interior Finishing : Distempering with dry distemper of approved brand and manufacture (two or more coats) and of required shade on new work, over and includingwater thinnable priming coat to give an even shade complete |
| 14 | Exterior Finishing : Finishing walls with water proofing cement paint of required shade onNew work (two or more coats applied @ 3.84 kg/10sqm). Complete |
| 15 | Applying 12mm thick Cement sand plaster of mix:1 : 4 ( 1 cement : 6 fine sand) on the brick masonary walls including Curing and all materials |
| 16 | Providing and fixing of Electric points of approved make with all fittings and fixtures steel junction boxes including hooks of approved make with all fittings and fixtures including wiring ,MCBS control units CJ fan point lighting Points complete and as per the directions of Engineer Incharge |
| 17 | Lighting points |
| 18 | Heating Points |
| 19 | Fan Points |
| 20 | Centering and shuttering including strutting, propping etc. and removal of form work for complete |
| 21 | Foundations, footings, bases of columns, slabs etc. for mass concrete.complete : Raft |
| 22 | Suspended floors, slabs Staircases landings roof balconies and acess platforms : Slabs |
| 23 | Lintel , Beams plinth beams Girders , Bressumers and Cnatilevers : GF lintel and Beasm |
| 24 | Stairs excluding Landings : Stairs &steps |
| 25 | Second class Nallah Muck /Sand Filling in rooms duly handpacked including ramming watering Completeas per direction of Engineer-in-charge. |
| 26 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat ofapproved steel primer all complete Welded |
| 27 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete 600x600 mm size |
| 28 | Providing 0.5mm thick colour coated HI Rib sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter withbitumen and G.I limpet washers or with G.I. limpet washers filled withwhite lead, including a coat of approved steel primer and two coats ofapproved paint on overlapping of sheets complete (upto any pitch inhorizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required |
| 29 | Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete 0.50mm thick color coated complete |
| 30 | Providing and applying 02 mm thick white cement based putty, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 31 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, ofrequired size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed withmatching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels 16/18 mm thickness as per the directions of Engineer in charge |
| 32 | Proividing and fixing of 4.0 mm thick glass panes including cost of beading nails, glazing clips in windows Steel doors celestory windows all complete job or as per the directions of Engineer In charge Please Enable Macros to View BoQ information |
