|
| 1 | Steel work welded in built up sections, framed work including cutting hoisting fixing in position and applying a priming coat of red lead paint including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a) In gratings, framed guards bars ladders, railing, brackets and similar work. in or as per direction of the Engineer- in - Charge |
| 2 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 0.63 mm thick sheet. ( Labour rate ) |
| 3 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty (i) Float glass panes of nominal thickness 4 mm including carriage of materials in all leads as per directions of the Engineer-in-Charge. (weight not less than 10kg/sqm) |
| 4 | (ii) Frosted glass 5 mm thick |
| 5 | Providing and fixing 1.50mm(One point Fifty milimetre) thick PVC antistatic venyl Flooring plain or coloured, carbed or mosaic/metalled finish laid with approved adhesive on sub-floor (damp proofing treatment to be paid for separately) including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. |
| 6 | Providing and fixing chromium plated curtain rod having wall thickness of 1.25 mm etc wherver necessery complete ( 10 25mm dia. |
| 7 | Providing and fixing chromium plated brass phinal etc wherever necessary complete ( i)25mm dia |
| 8 | Providing and fixing chromium plated brass Curtain brackets , whever necessery complete ( i0 25 mm phinal etc wherever necessary complete ( i)25mm dia |
| 9 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge |
| 10 | Providing and fixing 15 mm mixer for kitchen sink with top / bottom swinging spout make ESSS ESS |
| 11 | Prtoviding and fixing Venity HDHMR with SS 304 hings with wash basin and CP waste including carriage of materials in all leads and lifts as per direction of Engineer - in - charge . |
| 12 | Providing and fixing one piece water closet ovel shaped white including carriage of materials in all leads and lifts as per directions of the Engineer- in - charge make Hindware for equivlents . |
| 13 | Providing and fixing hand faucet including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. Make ESS ESS |
| 14 | Providing and fixing 100 mm sand cast iron for gully trap including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. |
| 15 | Providing and fixing C.P. Brass Towel rail rack complete with C.P. Brass brackets fixed to wooden plugs with C.P. Brass screws including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 600 mm long towel rail with total length of 645 mm, width88 mm and effective height of190mm, weighing not less than 190 gms. make ESS ESS |
| 16 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. Make ESS ESS |
| 17 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. Make ESS ESS |
| 18 | Providing and fixing chromium plated brass soap dish with C.P. Brass brackets fixed to wooden cleats with C.P. Brass screws:- including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (E.S) MAKESeiko or Equivalent |
| 19 | Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 15 mm nominal bore with 45 cm length MAKE Viking |
| 20 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) Flexible pipe (a) 32 mm dia Make viking |
| 21 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. Make ESS ESS |
| 22 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 15mm nominal bore MAKE ESS ESS Heavy duty |
| 23 | Providing and fixing over head shower including carriage of materials in all leads and lifts as per direction of the Enginner -in - charge . Make Ess ESS |
| 24 | Providing and fixing over head shower arm including carriage of materials in all leads and lifts as per direction of the Enginner -in - charge . Make ESS ESS |
| 25 | Providing and fixing divertor concealed body including carriage of materials in all leads and lifts as per direction of the Enginner -in - charge . Make ESS ESS |
| 26 | Providing and fixing Upper SCLD HF including carriage of materials in all leads and lifts as per direction of the Enginner -in - charge . Make ESS ESS |
| 27 | Providing and fixing hand shower carriage of materials in all leads as per direction of the Enginner -in - charge . Make ESS ESS |
| 28 | Providing and fixing wall mount for wash basin including in all leads as per direction of the Enginner -in - charge . Make ESS ESS |
| 29 | Providing and fixing Cornor including carriage of materials in all leads and lifts ap per directions of Engineer - in - chagre . |
| 30 | Providing and fixing CP Brass toilet paper holder with in all leads , lifts of materials and other incidentals . |
| 31 | Providing and fixing PVC/ WPC ceiling / Panelling with secrew of nail including carriage of materials as per direction of the Enginner -in - charge . |
| 32 | Providing and laying Granite work (table rubbed and polished) with semi round nosing in flooring laid over 20mm (Twenty milimetres) thick base in 1:3 (One cement: three sand) including jointed with cement mortar 1:2 (one white cement: two marble dust) with an admixture of pigment to match the shade of marble 20mm (Twenty milimetres) thick Green marble with including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. |
| 33 | Extra for making double moulded nosing in terrazzo including returnd moulded ends and angles to mouldings in cluding carriage of materials in all leads and litfs . |
| 34 | Providing and fixing glass partition slider with 10 mm toughened glass including superior quality accessories / fittings |
| 35 | Providing and fixing 600x700 mm beveled edge mirror of cabnit of approved quality complete with 6 mm thick hard board ground fixed to wooden cleats with CP brass screws and washers complete . |
| 36 | Providing and fixing CP Grating for floors traps or Nahani trap including carriage of materials in all leads and lifts . |
| 37 | Providing and fixing Hydraulic Channel for drawer in cupboard including of materials in all leads and lifts . |
| 38 | Provdiing and fixing polycarbonated sheet1.2mm thick in lining with galvanised self driven screws complete with all accessories as required including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. |
| 39 | Providing and fixing factory made UPVC door frame made of UPVC extruted sections having an overall dimension as below ( tolerance +1mm) with wall thickness 2.0 ( +0.2mm) corners of the door frame to be joined with galvanized brackets and stainles stel screws , joints mitred and plastic welded the hings side vertical of the frames reinforced by galvanized MS tube of size 19x19 mm and 1 mm ( +0.100) wall thickness and 3 Nos stainles steeel hings fixed to the frame complete as per manufactors specification and direction of Enginer -in - charge . |
| 40 | Providing and fixing anodised aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, abidused trabsoarebt ir dyed required shade conforming to IS 1868 (Minium anodic coating of grade AC 15) fixed with raw plugs and screws or with fixing clips or with expansion hold fastners including necessary filling up of gaps at junction at top bottom and sides with required PVC/Neoprence felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (a) For doors windows and ventilatiors and glazed partitions frames. |
| 41 | Providing and fixing glazing in aluminium doors and window , vintilator shutters and partition etc with PVC / neoprens gasket etc complete as per the Architectual drawing and the directions of Enginer - in - Charge ( cost of aluminium snap beading shall be paid in basic item ) |
| 42 | Glazing with glass panes of 4mm thickness ( weight not less than 10.00 kg / sqm |
| 43 | Glazing with glass panes of 10mm thickness |
| 44 | Providing and fixing ACP sheet (5mm thick) in aluminium door,wiondow, ventilator shutters and partition with PVC/Neoprehs gasket etc complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. ( Cost of aluminium snap beading shall be paid in basic item). |
| 45 | Providing and fixing anodised aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, abidused trabsoarebt ir dyed required shade conforming to IS 1868 (Minium anodic coating of grade AC 15) fixed with raw plugs and screws or with fixing clips or with expansion hold fastners including necessary filling up of gaps at junction at top bottom and sides with required PVC/Neoprence felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (a) For Idoors windows and ventilatiors and glazed partitions frames. |
| 46 | Providing and fixing 19mm thick Commercial Board water proof shutters for up boards i/c fixing with nickel plated piano hinges with screws etc complete) including carriage of materials in all leads and lifts as per the directions of the Engineer-in-Charge. |
| 47 | Providing and fixing ply wood lining with but jointing and nails (frame work and cover fillets to be measured and paid for separately) including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a) 9 mm thick . |
| 48 | Providing and fixing 0.80mm thick coloured or plain lamination sheet (sunmica) on boards/ply wood sheets with approved adhesive and nails etc. complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. |
| 49 | Providing and fixing magnetic Catchers ISI marked with necessary screws etc complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. |
| 50 | Providing and fixing SS handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 120 mm |
| 51 | Providing and fixing 19x6 mm beading section including mitring at juctions with wood screwsa and nails complete . |
| 52 | Providing and fixing Hydraulic channel for drawer in cupboard including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.(i) 15\\" |
| 53 | Providing and fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a) 40mm thick (i)2nd class deodar wood. |
| 54 | Providing and fixing wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85 G. with wire of dia 0.56 mm for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i)40mm thick 2nd class deodar wood |
| 55 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 150x10mm |
| 56 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 125 mm |
| 57 | Providing and fixing bright finishedaluminium door stopper including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 200 mm Please Enable Macros to View BoQ information |
