|
| 1 | Demolition reinforcement Concrete roofs, floors (other than ground floors) beams, stairscases, landing, chhajjas and similar suspended work complete all as specified |
| 2 | Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles |
| 3 | M&L for Precast cement concrete block masonary with solid blocks exc 10cm in width Type C1 (1:3:6) 20mm graded and setting in cement mortar 1:4 all as specified and directed |
| 4 | Taking down cement plaster on brick or stone walls or PCC block walling including raking out joints hacking for key scrubbing down with water etc. |
| 5 | M&L for 5 mm thick rendering for fair faces of concrete surfaces on ceiling in CM 1:3 is to be finished even and fair (without using extra cement). |
| 6 | M&L for rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement. |
| 7 | M&L for rendering 10mm thick in CM 1:4 and second layer shall be 5mm thick in CM 1:4 mixed with water proofing compound chemical @3% by wt of cement on fair faces of brick work or concrete surfaces . Note : WPC will be measured and paid separately & work will be done upto approx 10 mtr height |
| 8 | Supply only water proofing compound |
| 9 | M&L for preparing new plastered ceiling/soffits of chajjas surfaces and applying three coats of white wash complete all as specified and directed by Engineer-in-Charge. |
| 10 | M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over 1 to 2 mm thick a coat of wall care putty complete all as spepcified and directed. |
| 11 | M&L for preparation of plastered or unplastered new external wall surfaces of walls and applying two coats of exterior emulsion paint over a coat of water based primer complete all as spepcified and directed. |
| 12 | Taking down existing tarfelt from roof including plaster and remove from site complete all as specified and directed . |
| 13 | M&L for cement concete type C-1,1:3:6 mix (using 20mm grade stone aggregate) as in roof padding etc finished surface even and fair without using extra cement complete all as spd & as directed. |
| 14 | M&L 10mm thick rendering in cement mortar 1:3 on faces of brick work or concrete surfaces with WPC, finished even and smooth w/o using extra cement as in roof. (WPC shall be measured & paid seperately) complete all as specified and directed . |
| 15 | M&L water proofing treatment on roof and preparing the surfaces to receive WPT treatment , applying cold bituminous primer @ 0.4 Kg/ Sqm conforming to IS 3384 applied on plastered surfaces including side walls , followed by a layers of APP based polymeric membrane reinforced with polyster non woven fabric (weighing 3 Kg/Sqm(minimum) and 3 mm thick) with mineral finish laid on primed surface by torch application with side overlap 100 mm and ends over laps 150 mm , joints sealed properly as per manufacturers instructions all as specified and directed . |
| 16 | M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in roof kerbs/coping/ bed block /padding/ depression complete all as specified and directed. |
| 17 | Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately)as per direction of Engr-in-Charge. |
| 18 | S & F rotational moulded polythene white water storage tank tripple layared (cylindrical , vertical with closed top , ISI marked , ) hoisted and fixed in position all as specd in SSR Part 1 of capacity 500 ltrs including taking down existing tank also including provision of 20 mm bore ball valves , high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum wt 455 gms)( Make of tank Sintex cat no CCWS 0075-02-TLW or equivalent of makes given in Appendix B to PS Make of ball valve Prayag or equivalent in polytuff as approved by GE |
| 19 | S & F rotational moulded polythene white water storage tank tripple layared (cylindrical , vertical with closed top , ISI marked , ) hoisted and fixed in position all as specd in SSR Part 1 of capacity 1000 ltrs including taking down existing tank also including provision of 20 mm bore ball valves , high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum wt 455 gms)( Make of tank Sintex cat no CCWS 0075-02-TLW or equivalent of makes given in Appendix B to PS Make of ball valve Prayag or equivalent in polytuff as approved by GE |
| 20 | Taking up on down steel tubing and connection incl cleaning for refixing of the following bore of pipe |
| 21 | 15mm bore of pipe |
| 22 | 20mm bore of pipe |
| 23 | 25mm bore of pipe |
| 24 | Refixing 15/20mm bore old steel tubing and connections in new or old position any size (Walls, ceiling, floors, etc.), all as per direction of Engr-in-Charge. |
| 25 | Refixing 25 or 32 mm old steel tubing and connections in new or old position any size (Walls, ceiling, floors, etc.), all as per direction of Engr-in-Charge. |
| 26 | S&F for CPVC pipes ISI marked, IS-15778 with all fittings for hot and cold water, fixed with solvent cement complete to walls and ceilings or laid in floors of following sizes: (SDR-13.5 ) including all fittings connected to work, all as per specified and directed by Engr-in-Charge. |
| 27 | 20mm nominal dia of pipes |
| 28 | 25mm nominal dia of pipes |
| 29 | S&F in repair 20mm dia gun metal globe / gate valve with iron wheel head screwed both ends for iron pipe complete all as specified and directed. |
| 30 | S&F in repair 25 mm bore gun metal globe / gate valve with iron wheel head screwed both ends for iron pipe complete all as specified and directed. |
| 31 | Dismantling of cast iron, PVC or reinforced concrete pipes jointed in cement mortar and taking out of trenches, if required all as directed by Engr-in-charge following bore of pipe |
| 32 | 100/110mm dia of pipes |
| 33 | 75mm dia of pipe |
| 34 | S&F of UPVC drain, pipes, single socketed, ISI marked, IS-13592 type 'B' in any length, jointed with solvent cement fixed in walls and floors of following size :- (Make : Astral type 'B' pipes or equivalent) |
| 35 | 110mm dia of pipe |
| 36 | 75mm dia of pipe |
| 37 | Dismantling chain link fencing wiremesh, any type, complete all as specified and as directed by the EIC. |
| 38 | S&F chain link fencing plastic coated of size 75 mm x 75 mm, made out of 4.00 mm outer dia, straining bolts etc. including provn of binding wire or with nuts/bolts. |
| 39 | Dismantling posts or struts (Wood, Steel or RCC), any section embedded in concrete, brick work etc. including taking out embedded portion. |
| 40 | S&F mild steel posts and struts in fencing , flat iron as in wind ties for roof including securing bolts, including cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillets for securing wire mesh and similar work confirming to Fe-290 Gde E-165 |
| 41 | Excavating in post holes[or similar holes] n.exc 0.5 cum getting out ,returning filling in and raming earth or broken rubble mixed with earth around, in layers not exceeding, 25cm watering and removing surplus soil to a distance n.exc 50m and making good surface in soft disintegrated rocks |
| 42 | M&L for providing cement concrete 1:2:4,type B2 (40mm graded stone aggregate] in foundations, filling and mass concrete. |
| 43 | S&F in repair Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 44 | S&F framed work as grills, gratings, railing and grill of balcony etc.with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks & as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, chajja etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete. |
| 45 | S&F steel work in tubular trusses, purlins including special shaped washer etc complete using ERW or induction butt welded suare or round tubes conforming to IS 1161-1979 grade St- 240 complete all as specified and directed . |
| 46 | M&L for Preparation of new steel surfaces of any description exc 10 cm width or girth and appying two coat of synthetic enamel paint over a coat of red oxide complete all as specified and as directed. Please Enable Macros to View BoQ information |
