|
| 1 | M & L for preparation of old treated surfaces of wall including brooming down, scrapping down smoke soots Washing, rubbing down and stopping of distempered and painted surfaces etc. and appying one coat of white wash, complete all as specified and as directed. |
| 2 | M & L for preparation of old treated surfaces of Ceilings including brooming down, scrapping down smoke soots, Washing, rubbing down and stopping of distempered and painted surfacesetc. and appying one coat of white wash, complete all as specified and as directed. |
| 3 | M & L for preparation of old treated surfaces of wall surfaces and applying one coat of distemper with distemper oil emulsion white or tinted over and complete all as specified and as directed. |
| 4 | M & L for preparation of old treated surfaces of wall surfaces and applying two coat of distemper with distemper oil emulsion white or tinted over and complete all as specified and as directed. |
| 5 | M&L applying 1-2mm thick wall care putty on wall surfaces all as directed by Engr-in-Charge. |
| 6 | Complete removal of existing treatment on wall surfaces and applying two coat of distemper with distemper oil emulsion white or tinted over incl primer complete all as specified and as directed by Engr-in-Charge. |
| 7 | M&L for preparation of plastered or unplastered old decorated surfaces of wall and applying one coat of exterior emulsion paint comlete all as specified . |
| 8 | M & L for preparation of old wooden painted surfaces of any description exc 10 cm width or girth and appying one coat of synthetic enamel paint, complete all as specified and as directed. |
| 9 | M & L for preparation of old steel painted surfaces of any description exc 10 cm width or girth and appying one coat of synthetic enamel paint, complete all as specified and as directed. |
| 10 | M&L for writing letter or figures ( Block, roman , Italic or Indain ) n,exc 30 cm high using synthetic enamel paint |
| 11 | M&L for writing stops, commas , short lines, dashes , hypens , brackets etc using synthetic enamel paint |
| 12 | Taking down cement plaster any description on brick , block or stone walls etc including raking down joints hacking for key secrubing down with water etc any description |
| 13 | M&L for 5 mm thick rendering for fair faces of concrete surfaces on ceiling in CM 1:3 for fair finished surfaces. |
| 14 | M&L for 10 mm thick rendering for fair faces of concrete surfaces on walls in CM 1:6 and finished even and smooth without using extra cement as specified. |
| 15 | M&L for rendering on concrete surfaces 15mm thick in two layers first layer 10mm thick and 2nd layer 5mm thick in CM 1:4 with water proofing compound @3% by wt of cement, finished even and fair. Note: WPC shall be measure and paid seperately. |
| 16 | M&L for preparation of new plastered or unplastered old decorated surfaces of wall and applying two coat of exterior emulsion paint over a coat of water base primer comlete all as specified and as directed. |
| 17 | Supply only water proofing compound |
| 18 | M&L for preparing new plastered ceiling/soffits of chajjas surfaces and applying three coats of white wash complete all as specified and directed by Engineer-in-Charge. |
| 19 | M&L for preparing new plastered wall surfaces and applying two coats of distemper with distemper oil emulsion white or tinted over and including chalk whiting, on plastered surfaces, preparatory to distempering complete all as specified and directed by EIC. |
| 20 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises |
| 21 | Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) and removing rubbish off the MD land. |
| 22 | M&L for 25 mm thick cement concrete type B-0, 1:2:4 using 12.5mm graded stone aggregate in sub base of floors etc. |
| 23 | M&L for 75 mm thick cement concrete type C2, 1:3:6 using (40mm graded stone aggregate) aggregate in sub base of floors etc. |
| 24 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. |
| 25 | M&L for non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM 1:6 all as specified and directed. |
| 26 | M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM 1:6 all as specified and directed. |
| 27 | M&L glazed ceramic coloured tiles in vertical surfaces such as in skirting and dados 350x250x7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10mm thick plaster in CM 1:4 all as specified and directed. |
| 28 | M&L in repairs for 18-20mm thick granite, Z black (table rubbed and polished) for platforms, wall lining (veneering to wall), cills and in similar items laid over and including 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixutre of pigment to match with shade of granite external edges rounded. |
| 29 | Dismantling boarding, any description, fixed in any position with nails |
| 30 | S&F 18mm thick prelaminated PVC celuka Ply prelaminated one side with decorative choice lamination and other side plain fixed with screw to PVC celuka ply works |
| 31 | All as per item No 30 above but 18mm thick plain PVC celuka ply |
| 32 | All as per item No 30 above but 12mm thick plain PVC celuka ply |
| 33 | All as per item No 30 above but 05mm thick plain PVC celuka ply |
| 34 | S&F PVC coated basket for kitchen drawers of required size n. exe 0.5 Sqm and including sliding channels |
| 35 | S&F in repairs Vitreous China wash basin white flat back size 550x400 mm including bracket, cutting for and pinning the ends of brackets or erecting stands also including brass chromium plated waste coupling 32mm dia,PVC flexible wastepipe of adequate length and dia and PVC connection 15mm size 450 mm length with brass CP nuts on both sides, all as spd. |
| 36 | S&F in repairs two way angle cock 15mm chromium plate screw down screwed for iron pipe of brass ferrule etc complete all as specified and directed by EIC |
| 37 | S&F of waste pipe of 32mm dia PVC pipe for WHB with long screwed shanks and fly nut flange end beddedd in red lead cement and other end fixed |
| 38 | S&Fin repairs for Vitrious china squattin pan ,Orrissa Paattern Size 580x440 mm white with integral foot rests ( Excluding flushing cistern and flush pipe) |
| 39 | S&F in repairs vitreous china wash down water closet pan (pedestal pattern) white (excluding, flushing cistern and flush pipe) complete connected to p trap complete, including supply and fixing of seat cover all as directed by Engr-in-Charge. |
| 40 | S&F in repairs rotational moulded polythene white water storage tank (Cylindrical, vertical with closed top, ISI marked) hoisted and fixed in position all as specified in SSR- Part-I of capacity 500 ltrs including taking down existing tank also including provision of 20mm bore ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 455 gms) |
| 41 | All as per item No 40 above but capacity 750 ltrs |
| 42 | All as per item No 40 above but capacity 1000 ltrs |
| 43 | Cleaning & removing all scale and dirt etc from PVC water tank and from mouths of circulating pipes etc of capacity exc. 250 liters and n.exc. 500 ltrs including disconnecting and refixing all parts required to be disconnected for cleaning of the tanks and mantioning date of cleaning on tank after clean. |
| 44 | All as per item above but of capacity exc 500 liters and n.exc. 1000 liters |
| 45 | S&F 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms) |
| 46 | Supply & fix in repairs tank top cover (lid) white/black with locking arrangement complete of make : Sintex suitable for 500 ltr capacity complete all as specified and directed by Engineer-in-Charge. |
| 47 | All as per Item No 46 above but suitable for 750 ltr capacity complete all as specified and directed by Engineer-in-Charge. |
| 48 | All as per Item No 46 above but suitable for 1000 ltr capacity complete all as specified and directed by Engineer-in-Charge. |
| 49 | S&F in repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement with 75mm outlet dia. |
| 50 | M&L PVC (SWR) gully trap 125/110 mm,setting and jointing with solvent cement |
| 51 | Taking Down Shutters of any description but exc 1 sq. m and n exc 2 sq. m each |
| 52 | All as per Item No 51 above but exc 2 sq. m each |
| 53 | S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified. |
| 54 | S&F in repair Glass door 12mm Th clear tinted toughned glass incl diamond polish complete with six holes and two patch cut out incl frosting of glass all as per direction of EIC through CNC machine incl ISI marked floor door spring for each shutter incl top patch bottom patch and 30 cm long stainless steel handle set and central stainless steel lock all as specified and directed by EIC(Make of glass: Modiguard/Saint gobin,Make of Floor door spring:Godrej,FS D80(80Kg) CAT No 8293 or equivalent in Evrite as approved by GE) |
| 55 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets |
| 56 | M&L Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing. |
| 57 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame all as specified |
| 58 | M&L anodised aluminium snap grid size of grid 605mm x605mm frame work made out of 0.5mm thick GI tee 32x24mm for main, 25x44mm for cross tee and 20x20mm angle fixed on wall , powder coated finish on exposed faces of tee and angle , hung from ceiling using 2mm thick GI suspension wires spaced of 1200mm on main runners for false ceiling complete all as specified and directed by EIC. all as specified |
| 59 | M&L for gypsum ceiling board for ceiling prepainted , matt finish, 600x600x12x15mm in size with preparation of approved brand/ make, laid over, grid work ro fixed with nails to any type of frame work or with staples on snap grid incl making niches for fan/light on ceiling purposes. |
| 60 | M&L forPVC insulation panels with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S. as per specification. |
| 61 | M&L for providing 12mm thick Gyp boards in ceilings fixed to ceiling sections with screws @ 300mm centre to centre and making good joints Gypsum binder including preparing the surfaces of ceiling boards and applying 2 coats of acrylic oil emulsion distemper with GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre, intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from sofits at approxly 900mm centre to centre with GI cleats, GI suspenders and steel expansion fasteners with and including ceiling section of 0.55mm thick having kurled web of 50 mm and flange of 26 mm each side with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre all as specified as directed. |
| 62 | M&L for false ceiling corners with designed angular shape of size 100x100mm with POP fixed on 6mm thick fibre board with 20x20mm, 0.55mm thick galvanised sections fixed at intervals not more than 750mm complete al as specified and directed by Engr-in-Charge. |
| 63 | S&F in repaire Mild steel 2 levers Mortice lock, vertical type, size 100 mm |
| 64 | Demolition of precast concrete block walling built in cement morter |
| 65 | M&L for block masonry with precast cement concrete type 1:3:6 (using 20mm graded aggregate) solid bloks exc 10cm inwidth and seting in CM 1:6 complete all as specified and directed. Please Enable Macros to View BoQ information |
