Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. |
| 2 | Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge:. All Kinds of soil. |
| 3 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge.All kinds of soil |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-Ill) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 5 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 6 | Granite stone work gang saw cut (polished and machine cut) of thickness 18 mm for wall lining (veneer work), backing filled with a grout of 12 mm thick average in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment to match the marble shade (To be secured to the backing by means of cramps, which shall be paid for separately). Granite of any colour and shade Area of slab above 0.50 sqm. |
| 7 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete etc. as per direction of Engineerin- charge (length of finished kerb edging shall be measured to calculate volume for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). |
| 8 | Supply of earth at site including excavation, royalty, loading, unloading and banking the same in layers not exceeding 20 cm in depth, breaking clods and dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depressions including carriage of earth by mechanical transport lead upto 5.00 km and lift upto 1.50m. All kinds of soil. |
| 9 | Making bajri path including preparation of subgrade, supplying and laying brick aggregate of 50 mm nominal size 7.5 cm deep with blinding material consisting of 12 mm moorum and 12 mm red bajri consolidated with road roller. |
| 10 | Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineerin- Charge.With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30 |
| 11 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 12 | Random rubble masonry with hard stone in superstructure above plinth level and upto floor II level, including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling level and the like.Cement mortar 1:6 (1 cement : 6 coarse sand) (9275.45-1183.18)= 8092.27 |
| 13 | Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) :Flush/ Ruled pointing |
| 14 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable mate rial within 50 metres lead as per direction of Engineer-in-charge. In cement mortar |
| 15 | Dry stone pitching 22.5 cm thick including supply of stones and preparing surface complete. |
| 16 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor II level in all shapes and sizes in :Cement mortar 1:4 (1 cement : 4 coarse sand) (9344.35-1183.18) = 8161.15 |
| 17 | 12 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) |
| 18 | Providing & Fixing BALANCING BRIDGE Item Descriptions •of make ARIHANT/ KOMPON /LANDSCAPE STRUCTURE/ KOOCHIE/ HUGO Product Area : 7.3m X 0.8m (24ft X 2.6ft) • Safe Play Area : 8.3m X 1.8m (27.2ft X 6ft) • Ideal For : 5-12 Years • Friends at a time : 5-6, Technical Specification: •Side frame :40NB & 25NB hot dip galvanized pipe with, GI thickness of 60μ fixed together with base plates at bottom end to form balancing bridge side frame •Top pipe : 50NB pipe is hot dip galvanized pipe of height 4830mm with GI thickness upto 60μ with an ISF conforming to IS 1730-1961 welded at its one ends pipe can withstand torsional stress created due to swinging motion, •Support pipe :40NB hot dip galvanized pipe of length 2160mm with GI thickness of 60μ with base plates at bottom end to form balancing bridge support, structure. •Floats :Eight Floats of dia 600mm dia is made from rotational molded LLDPE plastic suspended over two parallel MS wire of dia. 12mm 15.5ft. long. The material used is LLDPE plastic with UV stabilizers for prolong outdoor application. •Rope :Polypropylene (PP) braided Rope of dia 18mm suspended between two sides frames for children to hold grip for support against falling. Rope size conforming to standards minimum grip requirement EN 1176-1:1998. •Rotational Molded Products :The ROTO products are manufactured using material LLDPE (Linear Low Density Polyethylene) with UV stabilization of Food Grade Non Hazardous Plastic compiled to ROHS. Thickness of the ROTO products varies from 5 mm to 8 mm as per the product. The overall product obtain is a seamless to ensure perfect blend of uniform thickness & durability. •Pipes: All metal pipes are Hot Dipped Galvanized Pipes with GI thickness upto 60micron. •Powder coating: It shall be done with pure polyester raw material. Dry film Thickness maintained within the range of 50-70 microns. It is tested for adhesion test (According to ASTM-D-3359) with the help of cross hatch cutter instrument. •Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Certificate: ISO9001:2015, Color: Multicolor for optional or customized & according to RAL shade. Packaging: Safety 3 layer packaging like 1st EPE Foam 2nd HDPE Film and 3rd is Stretch wrap. All complete as per the technical specifications to manufacture the item. The Complete item to be fixed in C:C (1:2:4) block of size:- After deep excavation/earth work at site as required. All complete as per directions and pre approval of Engineer-incharge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc. |
| 19 | Providing & Fixing FRP SPIRAL SLIDE 9 Ft. of make ARIHANT/ KOMPON /LANDSCAPE STRUCTURE/ KOOCHIE/ HUGO Item Descriptions • Product Area : 3.3m x 2.0m (10.8ft x 6.5ft) • Safe Play Area : 4.3m x 3.0m (14.1ft x 9.9ft) • Age Group : 4-12 yrs. Technical Specification: •Center Support pipe: Center Support pipe made from 80NB Galvanized pipe welded to 100NB Galvanized pipe GI thickness of 60μ. •Deck pipe: It is 80NB hot dip galvanized two support pipes with GI thickness of 60μ •Handle grip: Handle grip of 20NB conforming to EN 1176-1:1998 attached with Nylon clamp of Grade-6 clamped to the Deck pipe using SS304 graded Eachn rusting nut-bolts •Ladder Frame: The slide ladder is made up of 25 NB GI pipe & the ladder hand-railing is made up of 15 NB and 20 NB pipes respectively. •Ladder Step: Cold formed 16 Gauge GI Plated Sheet Length 500mm & width 90mm EN1176-1:1998 conforming to EN1176-1:1998 The trade and riser of the ladder are designed in such a way it won’t entrap child’s foot while playing. All the sharp edges and corners are properly grinded to give smooth finish so that children are not hurt while playing on it. •Pipes: All metal pipes are Hot Dipped Galvanized Pipes with GI thickness of 60micron. •Roto spiral Slide: It is made from rotational moulded material. The slide is completely made up of one piece with a thickness of 5-8mm keeping in consideration the ASTM & EN standards. The material used is LLDPE (Low-Density Polyethylene Plastic) in rotational molding process. •FRP Platform: It is made up of Fiber Reinforced Plastic (FRP) in one piece having shell thickness of 3-4 mm. Its size is 1.16M X 1.16M. • Spiral slide railings: 20NB hot dip galvanized pipe bended to form frame with two pairs of clamps joined together to GI Pipe with SS 304 graded non rusting nutbolts conforming to ASTM E-1086:1994, made from Nylon Grade-6 plastic. The ROTO molded plastic bush & rotomolded slim railing are inserted into the pipe frame in alternate pattern. The railing frame is bolted to Spiral slide platform with 20NB GI support pipe bolted to platform at one end & clamped with special nylon clamps to railing pipe frame. •For Roto product: The ROTO products are manufactured using material LLDPE (Linear Low Density Polyethylene) with UV stabilization of Food Grade Non Hazardous Plastic compiled to ROHS. Thickness of the ROTO products varies from 5 mm to 8 mm as per the product. The overall product obtain is a seamless to ensure perfect lend of uniform thickness & durability. •For FRP product: All the Fiber Reinforced Plastics (FRP) materials are processed by the hand laid process which is considered to be the best of its type. We use international quality of Gel coats which is duly mixed with U.V stabilized pigment to give the required colour to the product. Thickness of the FRP material varies from 3 mm to 5 mm as per the product. The FRP material is tested for abrasion resistance & UTS (ultimate tensile test) •Powder coating: shall be done of pure polyester exteriors ultra-stabilized powder Paints. Thickness maintained is a minimum of 60-70 microns. •Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Certificate: ISO9001:2015olor: Multicolor for optional or customized Packaging: Safety 3 layer packaging like 1st EPE Foam 2nd HDPE Film and 3rd is Stretch wrap. All complete as per the technical specifications tomanufacture the item. The Complete item to be fixed in C:C (1:2:4) block of size:- After deep excavation/earth work at site as required. All complete as per directions and pre approval of Engineer-incharge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc |
| 20 | Providing and Fixing Four Seater MGR of make ARIHANT/ KOMPON /LANDSCAPE STRUCTURE/ KOOCHIE/ HUGO Item Descriptions • Product Area : 2.1m Dia (7 ft Dia.) • Safe Play Area : 3.1m Dia (10.2 ft Dia.) • Ideal For : 3-8 Years • Friends at a time : 4, Technical Specification: •MGR frame : MGR Frame made from 40NB pipes welded together with bottom end over a circular plate, meant for assembling bearing assembly. The top end of the pipe is welded with a ISF & a plate for mounting, the ROTO/FRP Seats over it. The four 40NB pipe are hold together with four 25NB pipe to form a strong, structure. The GI plated bowl is used to cover the top of the bearing assembly. •Seat frame :20NB GI pipe bend and joint to form a frame structure with flat plate to mount seat. The frame is bolted to the MGR frame outer end. The frame is provided with spacers for foot rest. Hand Grip conforming to EN1176-1:1998. •Bearing assembly :Bearings are oil sealed, selflubricated, made of SKF/ NRB/ NACHI / FAG / NRB make, shall be provided for smooth & trouble-free, movement. The whole structure is mounted on heavyduty bearing shaft. •Center suppor : 80NB hot dip galvanized center support pipe of length 500mm with GI thickness of 40- 60μ .This pipe is welded with a 150x150mm base plate at bottom for fixing the foundation angles ISA & Circular plate on top for assembling the bearing. •Seat :MGR seat is made up of Fiber reinforced plastic(FRP)/LLDPE . Seat designed to accommodate one child per seat with backrest; The seat is bolted to the assembly with special structure. •FRP Product :All the Fibre Reinforced Plastics (FRP) materials are processed by the hand laid process which is considered to be the best of its type. We use international quality of Gel coats which is duly mixed with U.V stabilized pigment to give the required colour to the product. Thickness of the FRP material varies from 3 mm to 5 mm as per the product. The FRP material is tested for abrasion resistance & UTS (ultimate tensile test). •Pipes: All metal pipes are Hot Dipped Galvanized Pipes with GI thickness upto 40-60micron. •Powder coating: it shall be done with pure polyester raw material. Dry film Thickness maintained within the range of 50-70 microns. It is tested for adhesion test (According to ASTM-D-3359) with the help of cross hatch cutter instruments. •Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Certificate: ISO 9001:2015 Color: Multicolor for optional or customized & according to RAL shade. Packaging: Safety 3 layer packaging like 1st EPE Foam 2nd All complete as per the technical specifications to manufacture the item. The Complete item to be fixed in C:C (1:2:4) block of size:- After deep excavation/earth work at site as required. All complete as per directions and pre approval of Engineer-inchargeregarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc. HDPE Film and 3rd is Stretch wrap. |
| 21 | Providing & Fixing HALF ROUND NET SCRAMBLER of make ARIHANT/ KOMPON /LANDSCAPE STRUCTURE/ KOOCHIE/ HUGO, Item Descriptions • Product Area : 3.3m x 1.7m (10.3ft x 5.6ft) • Safe Play Area : 4.3m x 2.7m (14.1ft x 8.9ft) • Age Group : 4-12 yrs • Friends at a time : 4-6 Technical Specification: •Central supports:It is made up of 40NB of 710mm long and 40NB of 1720mm long Vertical Support Pipe. The bend pipes are attached to the support pipes with the help of plates 130x50x10mm The vertical supports are provided with foundation angles for strong foundation. •Top & Bottom Supports: It is made up of 40NB Galvanized Bend pipe with U-Hooks fixed on one side. The bend pipe is attached to the vertical supports on both ends.It has profile plate for side support. •Side supports:It is made up of 80NB of 2950mm long Vertical Support Pipe. The bend pipes are attached to the support pipes with the help of plates 130x50x10mm The vertical supports are provided with foundation angles for strong foundation. •Rope: Rope size conforming to standards En 1176- 1:1998 for minimum grip requirement. It is size of Ø18 of nylon. Mesh size conforming to standards EN1176-1:1998& ASTM - F1487:07a for safety against entrapment of head & neck •Clamp: Its is made from nylon. nylon rope attached by specially designed nylon rope clamps used which has rope integrated inside which hold it tightly and avoids breaking •Pipes: All metal pipes are Hot Dipped Galvanized Pipes with GI thickness of 40-60micron. •Powder coating: shall be done of pure polyester exteriors ultra-stabilized powder Paints. Thickness maintained is a minimum of 60-70microns. •Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Certificate: ISO9001:2015 Color: Multicolor for optional or customized Packaging: Safety 3 layer packaging like 1st EPE Foam 2nd HDPE Film and 3rd is Stretch wrap. All complete as per the technical specifications to manufacture the item. The Complete item to be fixed in C:C (1:2:4) block of size:- After deep excavation/earth work at site as required. All complete as per directions and pre approval of Engineer-incharge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc. |
| 22 | Providing & Installing Double Arch Swing of make ARIHANT/ KOMPON /LANDSCAPE STRUCTURE/ KOOCHIE/ HUGO of size 3.20x1.50mtr. Main Frame:- Main Cross Bar made of round 75mm O.D. pipe and legs made of 50mm N.B. pipe Legs- Arch shaped bended (Must be min in G I “B” class pipe). T pipe will be required for the Cross bar. All the pipes should be ISI marked( as per the IS 1239/2004) & of reputed brand. Ensuring the Strength, durability, stability & long life to the Kids. structure with safety as paramount. Seats- Belt Type Seats made of Synthetic Rubberized material are Virgin Plastic material & also duly with UV resistant colors, Chain Made of approx. 6mm thick G,I chain with rubberized coating of with 3 mm minimum thickness, Chorme plated supporting hook for belts Hooks for convenience & height adjustment/ Seat Movement, self lubricated council type bush baring clamps provided with rubber coated chain to hang the co plate belt assebbly. The complete structure double arc swing should be powder coated with minimum powder coating thickness of 60-80 microns. Accessories: Nut bolts to be used All approved GI nut bolts Galvanised Iron with High tensile Strength. Accessories: Nut bolts to be used All approved GI nut bolts Galvanised Iron with High tensile Strength. Kid capacity 2-8 Nos. Complete as per drawings attached and direction of Engineer-in Charge. All complete as per the technical specifications to manufacture the item. The Complete item to be fixed in C:C (1:2:4) block of size:- After deep excavation/earth work at site as required. All complete as per directions and pre approval of Engineer-incharge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc. |
| 23 | Providing & Installing of Std. SEE- SAW of make ARIHANT/ KOMPON /LANDSCAPE STRUCTURE/ KOOCHIE/ HUGO Item Descriptions • Product Area : 2.5m X 1.5m (8.2ft X 5ft) • Safe Play Area : 3.5m X2.5m (11.5ft X 8.2ft) • Ideal For : 4-10 Years • Friends at a time : 4 Technical Specification: •Frame: Frame of standard see-saw is designed using 15NB, 20NB & 25NB/32NB G.I. pipe and it has been given radius by suitable bending techniques. Plates has been welded at places were seat has to be installed so that seats can be fixed to the frame with suitable bolting arrangement. •Roto Seat : Rotational molded seats of thickness 6mm areused in these see-saw , it has been provided with bolts to fix it too see-saw frame which has a plates of 200X150X5mm welded on to the frame. Handle has been provided on the frame made up of 20NB pipe and also conforming to EN standards. The Multi Seater See saw comprises four roto seats. •For Roto product: The ROTO products are manufactured using material LLDPE (Linear Low Density Polyethylene) with UV stabilization of Food Grade Non Hazardous Plastic compiled to ROHS. Thickness of the ROTO products varies from 5 mm to 8 mm as per the product. The overall product obtain is a seamless to ensure perfect lend of uniform thickness & durability. •See-saw stand : 50NB Hot dip Galvanized Pipe with GI thickness of 60μ ,Pipe length 550mm Plate 150X150X5mm is used as a foundation plate for the vertical pipe. 25NB Pipe is also attached to provide extra strentgth to ths stand. •Standard See-saw Clamp: Standard see saw clamp is used in see saw so as to provide required motion for the see saw. •Bearing: The bearing used in this item is heavy duty nylon bush type •Pipes: All metal pipes are Hot Dipped Galvanized Pipes with GI thickness of 60micron. •Pipe Materials or Class: Light Duty ('A' Class) & Medium Duty ('B' Class) Series of pipes only. Wall thickness of pipe varies according to class / series of pipe used. •Powder coating: it shall be done with pure polyester raw material. Dry film Thickness maintained within the rangeof 50-70 microns. It is tested for adhesion test (According to ASTM-D-3359) with the help of cross hatch cutter instrument. •Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Certificate: ISO9001:2015 Color: Multicolor for optional or customized & according to RAL shade. Packaging: Safety 3 layer packaging like 1st EPE Foam 2nd HDPE Film and 3rd is Stretch wrap. Note: Images and colour of the produts are only for reference. Actual product/ colour may vary. All complete as per the technical specifications to manufacture the item. The Complete item to be fixed in C:C (1:2:4) block of size:- After deep excavation/earth work at site as required. All complete as per directions and pre approval of Engineer-in- charge regarding material, shape of equipment, colour (of metal, seat and powder coating), and fixing of equipment etc. (The fixing charges of C:C Block shall be paid separately). |
| 24 | Providing & Fixing ANIMAL M.G.R. of make ARIHANT/ KOMPON /LANDSCAPE STRUCTURE/ KOOCHIE/ HUGO Item Descriptions • Product Area : 2.1m Dia (7 ft Dia.) • Safe Play Area : 3.1m Dia (10.2 ft Dia.) • Ideal For : 3-12 Years • Friends at a time : 4 Technical Specification: •MGR frame : MGR Frame made from 40NB pipeswelded together with bottom end over a circular plate meant for assembling bearing assembly. The top end of the pipe is welded with a ISF & a plate for mounting the animal (duck) over it. The four 40NB pipe are hold together with four 25NB pipe to form a strong structure. The GI plated bowl is used to cover the top of the bearing assembly. •Bearing assembly :Bearing assembly with two bearings 1. Ball Bearing used for smooth rolling action. 2.Taper Roller Bearing take vertical thrust due to rolling moment & applied weight. The whole structure is mounted on heavy-duty bearing shaft permanently lubricated with water sealant. •Center suppor : 80NB hot dip galvanized center, support pipe of length 500mm with GI thickness of 60μ .This pipe is welded with a 150x150mm base plate at bottom for fixing the foundation angles ISA & Circular plate on top with OD 200mm for assembling the bearing. •Foot rest :Foot rest made from 15NB Galvanized pipe with end caps welded to two plates forming foot rest. •Duck :Duck is made out of molded plastic in rotational molding process . •Rotational Molded Products :The ROTO products are manufactured using material LLDPE (Linear Low Density Polyethylene) with UV stabilization of Food Grade Non Hazardous Plastic compiled to ROHS. Thickness of the ROTO products varies from 5 mm to 8 mm as per the product. The overall product obtain is a seamless to ensure perfect blend of uniform thickness & durability. •Pipes: All metal pipes are Hot Dipped Galvanized Pipes with GI thickness upto 60micron. •Pipe Materials or Class: Medium Duty ('B' Class) Series of pipes only. •Powder coating : It shall be done with pure polyester raw material.Dry film Thickness maintained within the range of 50-70 microns. It is tested for adhesion test (According to ASTM-D-3359) with the help of cross hatch cutter instruments. •Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Certificate: ISO9001:2015 Color: Multicolor for optional or customized & according to RAL shade. Packaging: Safety 3 layer packaging like 1st EPE Foam 2nd HDPE Film and 3rd is Stretch wrap. All complete as per the technical specifications to manufacture the item. The Complete item to be fixed in C:C (1:2:4) block of size:- After deep excavation/earth work at site as required. All complete as per directions of Engineer-in- charge regarding material, shape of equipment, colour (of metal, seat and powder coating), and fixing of equipment etc. All GI pipe to be used of make Apollo/ Jindal/ Tata with powder coating process. |
| 25 | Providing & Fixing MAPS 75 of make ARIHANT/ KOMPON /LANDSCAPE STRUCTURE/ KOOCHIE/ HUGO Product Area: 21ft X 18ft, • Safe Play Area : 25ft X 28ft, • Age Group : 5-12 yrs, • Friends at a time : 6 to 8, • Platform Height : 5ft, Technical Specification: Standard See Saw:- The standard see-saw is a good entertainer for the children. The seats of the see saw are made from Rotational molded plastic. The lever is made up of 15, 20, 25 NB GI pipes and is fitted on 40NB GI pipe. The bearing used is of heavy duty bush type. This has to be attach with swing frame. MAPS Double Swing:- In the double swing the leg support is made up of 40 NB GI pipes and top pipe is of 50 NB GI pipes with GI junction box with powder coating. The swing seats are made up of 10mm thick anti-skid chequered reinforced rubber top. The rubber belt seat is suspended on 6mm rubber coated GI chain. The ball bearings are mounted inside a specially designed nylon clamp. Roto Wave Slide 5’ht: ROTO Wave Slide is made up ofLLDPE by Rotational Molding Process. The landing of the slide is supported by stand made up of 20 NB pipe and 5mm thick MS plate with GI plating. GI Ladder:- Ladder Frame: The slide ladder is made up of 25 NB GI pipe & the ladder hand-railing is made up of 20 NB pipes respectively. Ladder Step: Cold formed 16 Gauge GI Plated Sheet Length 500mm & width 90mm EN1176-1:1998conforming to EN1176-1:1998. The trade and riser of the ladder are designed in such a way it won’t entrap child’s foot while playing. All the sharp edges and corners are properly grinded to give smooth finish so that children are not hurt while playing on it. LLDPE (LINEAR LOW DENSITY POLYETHYLENE):-The ROTO products are manufactured using material LLDPE (Linear Low Density Polyethylene) with UV stabilization of Food Grade Non Hazardous Plastic compiled to ROHS. Thickness of the ROTO products varies from 5 mm to 8 mm as per the product. The overall product obtain is a seamless to ensure perfect blend of uniform thickness & durability. Pipes: All metal pipes are Hot Dipped Galvanized Pipes with GI thickness of 60micron. Powder coating: It shall be done with pure polyester raw material.Dry film Thickness maintained within the range of 50-70 microns. It is tested for adhesion test (According to ASTM-D-3359) with the help of cross hatch cutter instruments. Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Certificate: ISO9001:2015 Color: Multicolor for optional or customized Packaging: Safety 3 layer packaging like 1st EPE Foam 2nd HDPE Film and 3rd is Stretch wrap. MAPS 75 MAPS 75 |
| 26 | Providing and laying EPDM Rubber Flooring 20mm thick as approach by the Engineer-In-Charge. |
| 27 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 28 | Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-incharge.( Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment). Overhead informatory road signage |
| 29 | Providing and fixing assembling precast reinforced cement concrete bench of over all size 1500 mm x 450 mm x 1000 mm, the bench consist of 02 nos. L-shape base sport in cement, thickness 100 mm back height 1000 mm front height 450 mm base width 620 mm as per sketch and 05 nos. reinforced concrete planks in red colour of sized 1500 mm x 100 mm x 50 mm and 01 nos. RCC planks of size 1500 mm x 200 mm x 50 mm by using M-30 grade of concrete using vibro compaction process, bench top and back planks are treated with special anti-corrosive water proof coating so as to make surface glossy and water proof including transportation, erection all part are jointed to gather with galvanized nuts and bolts of suitable size. All bolts are sealed after assembly. (benches shall be of KK mark or approved by Engineer-in-charge). |
| 30 | Supplying, installation, Testing and commissioning of continuously tapered multifaceted and polygonal cross section 16mtr high mast system hot dip(galvanized) with wind velocity as per IS 875 part-3 as per detailed specification attached with following Make Bajaj, Philips, G.E., Volmont.a) 2 sections having suitable sectional length with slip joints between various sections without any circumpherial welding.b) Double drum winch with separate handle for manual operation of winch with a torgue limiting device for safe checking of carriage.c) Raising/lowering type lantern carriage designed to carry 9 Nos. luminaries control gear box, junction box and top pulley assembly with weather proof cover.d) Necessary suitable length for lowering and raising of lantern carriage of stainless steel wire ropes of 7/19 construction and with suitable size of multi core flexible copper power cable.e) Hinged service door in base section base plate earthing terminal.f) Lightening conductor final made of 25mm dia 300mm long G.I. tube having single prong.g) Integral single power tool (electrical) for lowering & raising of high mast. |
| 31 | Providing and laying the RCC foundation suitable for erection of 16mtr high mast as per manufacturers recommendation including excavation, casting of foundation anchor plate, templates and foundation bolt manufacturer from special steel along with nuts, washers etc. R.C.C. work 1:1.5:3 (1 cement” 1.5 coarse sand: 3 graded stone aggregate 20mm nominal size) with material, labour and reinforcement with size of footing 2.10x2.10x0.20m laid over 1:4:8(1 cement:4 coarse sand:8 graded stone aggregate 40mm nominal size) and foundation pedestal of size 0.90x0.90x2.00m or as per approved drawing complete as required. |
| 32 | Supplying and laying double walled corrugated (DWC) High Density Poly ethylene (HDPE) pipe of 50/38 size having corrugation on the outer wall and plain surface on inner wall confirming to IS 14930 (Part II) below the ground level excluding excavation refilling the trench etc. as per specification etc. as required |
| 33 | Providing and fixing of 200 watt LED flood light (IP66) with aluminium housing and heavy heat sink, including toughned glass (Surya). |
| 34 | Supplying, installation, testing and commissioning of feeder pillar of suitable size made from 2mm thick CRCA sheet dust and varmin proof duly phosphatized and painted inclusive of suitable size 4 strip Bus bar complete with inter connection, inter earthing and providing and fixing below noted accessories.(M/R)Timer 24 hours = 1 No.TPN MCCB – 63 Amp = 1 No.MCB- 6 to 32 Amp = 10 Nos.Power contactor = 1 No.Indicator light = 3 Nos.Reverse switch = 1 No. |
| 35 | Supplying of PVC insulated and PVC sheathed (General purpose) XLPE/armored multi core cable with standard aluminum conductor suitable for working voltage upto and including 1100 volts confirming to IS 7098/Part/1988 with amendment slips upto date. Size 4x25sqmm. (M/R) |
| 36 | Laying and fixing of one number PVC insulated & PVC sheathed /XLPE power cable of 1.1 KV grade of size not exceeding 35sq. mm clamped with 1mm thick saddle on wall surface, as required. |
| 37 | Laying and fixing of one number PVC insulated & PVC sheathed /XLPE power cable of 1.1 KV grade of size direct in ground including excavation and refilling the trench etc. as required but excluding sand cushioning and protective covering upto 35mm.(7.3.1) |
| 38 | Earthing with G.I. earth pipe 4.5 mtr long, 40mm dia including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required.5.2 |
| 39 | Supplying and laying 6 SWG G.I. wire at 0.50metre below ground level for conductor earth electrode including connection, termination with G.I. thimble etc. as required. 5.7 |
| 40 | Providing and fixing 3 Seater Stainless Steel benches with backrest made out of SS 304 Grade materials, overall dimension 1450x890x450 mm, sheet thickness will be 1.5mm and pipe thickness will be 2.0mm and dia. 38 mm. Turret punching or Laser cutting will be used for perforation.(weight approx. 40 Kg) |
| 41 | Fabrication supplying and erection of flange mounted hot dip Galvanized octaqgonal Poles of 5 Mtr. Height made from 3mm thick steel plate having bottom Dia of 130 mm & top Dia of 70mm complete base plate of size 200mm x 200mm x12mm thick on existing cement concrete pedestal as required including suppling and welded at suitable height as per direction of Enginer-in-charge. 2 Nos. washer, nuts and locking arrangement completed as required (Make Bajaj/Crompton/Phillips/Wipro/havells) |
| 42 | Supplying and fixing of 4 Nos. 20mm x 700mm long GI foundation bolt (EN 8 grade) with nuts washer including 2 Nos. template of 3mm thick size 200mmx200mmx12mm thick with 4 Nos. 16mm Dia holes to match with PCD of poles base plate as required (Make Bajaj/ Crompton/ Phillips/ Wipro/ havells) |
| 43 | Fabrication supplying and fixing of Galvanized single arm bracket 500mm long galvanized top tube with 1000mm long 48.30x3.20mm thick each side galvanized single over hang with tighting bolt etc. as required ( ordinary) (Make Bajaj/ Crompton/ Phillips/ Wipro/ havells) |
| 44 | Providing and laying in position specified grade of reinforced cementconcrete, excluding the cost of centering, shuttering, finishing andreinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stoneaggregate 20 mm nominal size). |
| 45 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 46 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete |
| 47 | Supplying installation testing and commissioning of 100 watt LED 6000K asymmetric new generation energy saving and environment long life versatile pressure die cast aluminum IP66 roadway luminaries with high power LED light source complete etc. as required housing reflector and enclosed with toughened glass complete with all accessories, Philips/Bajaj/Crompton/Halonix/Havells (Model HSLD-15-100-CWDL-R01). (A/R) |
| 48 | Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately) |
| 49 | Providing and fixing Blue and Green plastic Dust bin swing type, 60 liter capacity with stand all complete. |
| 50 | Centering and shuttering including strutting, propping etc. and removal of form for Small lintels not exceeding 1.5 m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like |
| 51 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor II level, excluding the cost of centering, shuttering and finishing :1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). (9895.20-1365.53 =8529.45 ) |
| 52 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gatesand similar works |
| 53 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I. wire of dia 3 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. |
| 54 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 55 | Providing and fixing of ABS BOARD/ SIT UP BOARD (Double) of make ARIHANT/ KOMPON /LANDSCAPE STRUCTURE/ KOOCHIE/ HUGOsize 1400x1366x650mm fabricated with main post of 114mm and “C” Class G.I pipe made of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel of 60-80 micron thick. All joints of pipe are4 robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint are applied at all welding points prior to finishing. Sit up boards and Base plate cover to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic of 8mm, colourfuland UV resistant and environmental friendly. All complete as per direction and approval of engineerin- charge regarding material, shape of equipment, colour on metal, seat and base pedal and fixing of equipment etc The equipment to be fixed on ground with concrete of strength M-25 and J shaped welded bolt and ones the concrete is set, fix the equivalent on to it and cover nuts and bolts with the base plate cover. |
| 56 | Providing and fixing of SHOULDER TWIRL DOUBLE / ARM WHEEL of make ARIHANT/ KOMPON /LANDSCAPE STRUCTURE/ KOOCHIE/ HUGO size 857x850x1815mm fabricated with main post of 114mm and “C” Class G.I. pipe made of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel of 60-80mm micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paints are applied at all welding points prior to finishing. Packaging: Safety 3-layer packaging like 1st EPE Foam 2nd HDPE Film and 3rd is Stretch wrap. All complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base pedal and fixing of equipment etcThe equipment to be fixed on ground with concrete of strength M-25 and J shaped welded bolt and ones the concrete is set, fix the equivalent on to it and cover nuts and bolts with the base plate cover. |
| 57 | Providing and fixing Aerial Stroller of make ARIHANT/ KOMPON /LANDSCAPE STRUCTURE/ KOOCHIE/ HUGO• Product Area : 1m x 0.5m (5ft x 2.6ft), • Safe Play Area : 2m x 1.5m (6.6ft x 5ft). Ideal For 13, Years & above., • Strengthens Leg Muscles., • Lower body workout , Technical Specification: The Aerial Stroller having, Ergonomic design with 80NB GI main vertical, support pipes of Aerial Stroller are fixed over 10mm thick base plate. Clamping plates are attached to main frame to hold the rest of assemblies. Bottom horizontal pipe is of 50NB GI pipe. An ergonomically designed Handle frame is connected to main frame. Footrest bend and Handle having 40NB and 25NB Dia galvanized pipe respectively. The materials usedfor foorest is aluminum/LLDPE/HDPE/Nylon. Specially designed mounting flange assembly having circular flange of 130mm dia with 16mm thickness is provided for footrest assembly. All metal pipes are Hot Dipped Galvanized Pipes conforming to IS 1239 (Part 1) with GI thickness of 60micron. Pipe Materials & Class: Heavy Duty ('C' Class) Series of pipes only. Wall thickness of pipe varies according to class/series of pipe used. Powder coating shall bedone with pure polyester raw material.Dry film Thickness maintained within the range of 50-70 microns.it is tested for adhesion test (According to ASTM-D-3359) with the help of cross hatch cutter instruments. Bearing Housing shall be made from MS material. Bearings are oil sealed, self-lubricated made of SKF/ NTN/ NACHI / FAG / NRB make shall be provided for smooth & trouble-free movement. Pins shall be made from EN8/ MS material & Circlips made from standard material. Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Certificate: ISO9001:2015. Color shall be Multicolor for optional or customized and as per RAL Shade. Safety 3 layer packaging like 1st EPE Foam 2nd HDPE Film and 3rd is Stretch wrap. The equipment to be fixed on ground with concrete of strength M-25 and J shaped welded bolt and ones the concrete is set, fix the equivalent on to it and cover nuts and bolts with the base plate cover. |
| 58 | Providing & Fixing of Chest & Shoulder Exercise Combo of make ARIHANT/ KOMPON /LANDSCAPE STRUCTURE/ KOOCHIE/ HUGO Item Descriptions • Product Area : 2020mm x 1050mm • Safe Play Area : 4020mm x 3050mm • Ideal For : 13 Years & above, Function: • Strengthens Back Muscles. • Strengthens Chest Muscles. • Upper body workout Technical Specification: •Post Dia: The \\"Chest & Combo \\" having Ergonomic, design with 100NB GI main vertical support pipe is fixed over 10mm thick base plate. clamping plates are attached to main frame to hold the rest of assemblies. •Footrest and Handles: Footrest frame and Handle having 32NB and 25NB Dia galvanized pipe with Rubber grips respectively. •Seat: Ergonomically Designed, Complete Rotational Molded single piece part, Material :- LLDPE/HDPE/Nylon. •Pipes: All metal pipes are Hot Dipped Galvanized Pipes conforming to IS 1239 (Part 1) with GI thickness of 60micron. •Pipe Materials or Class: Medium Duty ('B' Class) and Heavy Duty ('C' Class) Series of pipes only.Wall thickness of pipe varies according to class/series of pipe used. •Powder coating:it shall be done with pure polyester raw material.Dry film Thickness maintained within the range of 50-70 microns.it is tested for adhesion test (According to ASTM-D-3359) with the help of cross hatch cutter instruments. •Bearing Housing is made from MS material. •Bearing: Bearings are oil sealed, self-lubricated made of SKF/ NTN/ NACHI make, to provid smooth & trouble-free movement.•Pins and Circlips: 25mm and 47mm diameter pins are made from EN9 material & Circlips made from standard material. •Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Certificate: ISO9001:2015 Color: Multicolor for optional or customized and as per RAL Shade. Packaging: Safety 3 layer packaging like 1st EPE Foam 2nd HDPE Film and 3rd is Stretch wrap. The equipment to be fixed on ground with concrete of strength M-25 and J shaped welded bolt and ones the concrete is set, fix the equivalent on to it and cover nuts and bolts with the base plate cover. |
| 59 | Providing & Fixing LEG EXTENTION of of make ARIHANT/ KOMPON /LANDSCAPE STRUCTURE/ KOOCHIE/ HUGOProduct Area: 0.73m x 0.75m (2.4ft x 2.5ft).Safe Play Area: 2.73m x 2.75m (8.9ft x 9ft). Ideal For: 13 Years & above. Function:For lower body workout. Technical Specification:Main Frame of Leg extension is 100NB G.I Pipe.The paired 25NB pipe handle with PVC/ rubber handgrips at the end is fixed over 40NB pipe frame.Two rolling frames are made by 40 NB & 20 NB G.I. pipes. Rolling frames are hinged at the one end of 40 NB bend pipe frame with specially designed bearing housing. The materials used for forest are aluminium/LLDPE/HDPE/Nylon. A suitable Nylon roller is provided for foot rest on rolling frame for cushioning purpose. Two PU rubber bushes are attached to main support pipe to avoid jerk due toimpact of rolling frames.Bearing Housing shall be made from MS material. Bearings are oil sealed, selflubricated made of SKF/ NTN/ NACHI make shall be provided for smooth & trouble-free movement. All metal pipes are Hot Dipped Galvanized Pipes conforming to IS 1239 (Part 1) with GI thickness of 60micron. Medium Duty ('B' Class) and Heavy Duty ('C' Class) Series of pipes only. Wall thickness of pipe varies according to class/series of pipe used. Powder coating shall be done with pure polyester raw material. Dry film Thickness maintained within the range of 50-70 microns.it is tested for adhesion test (According to ASTM-D-3359) with the help of cross hatch cutter instruments.Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Certificate: ISO9001:2015. Color shall be Multicolor for optional or customized and as per RAL shade. Safety 3-layer packaging like 1st EPE Foam 2nd HDPE Film and 3rd is Stretch wrap. The equipment to be fixed on ground with concrete of strength M-25 and J shaped welded bolt and ones the concrete is set, fix the equivalent on to it and cover nuts and bolts with the base plate cover. |
| 60 | Providing and fixing of OVATE STEPPER of make ARIHANT/ KOMPON /LANDSCAPE STRUCTURE/ KOOCHIE/ HUGO Design, Shaped and size of OVATE STEPPER as per standard given by the manufacturer fabricated with main post of 76 N.B. and “B” class GI pipe made of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel of 80-120mm micron thick. All joints of pipe are robotic type welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint are applied at all welding points prior to finishing. Pedals shall be made of Nylon alloy with rounded edges to prevent any impact of injury and base plate cover to be made from virgin LLPDE/FRP material. The handle frame made out 32mm GI pipe & Foot frame of 50x50mm sq. tube with powder coating process. Bearing used shall be made maintenance free, duly oil sealed and self-lubricated made by reputed company to be approved by Engineer-in-charge. Equipment to be fitted with inbuilt limiter to prevent unwanted movement. All open ends of pipe to be closed by LLPDE caps for user friendly. Safety 3-layer packaging like 1st EPE Foam 2nd HDPE Film and 3rd is Stretch wrap. The equipment to be fixed on ground with concrete of strength M-25 and J shaped welded bolt and ones the concrete is set, fix the equivalent on to it and cover nuts and bolts with the base plate cover. |
| 61 | Providing and fixing of HIP TWISTER TRIPLE/ WAIST TWISTER of make ARIHANT/ KOMPON /LANDSCAPE STRUCTURE/ KOOCHIE/ HUGO size1840x1840x2000mm fabricated with main post of 114mm “C” Class G. I. Pipe made of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel of 60-80mm micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paints are applied at all welding points prior to finishing. Rotating and base plate cover to be made from virgin LLPDE manufactured by rotational moulding with minimum thickness of plastic of 8mm colourful and UV resistant and environmental friendly. Bearing used shall be made maintenance free, duly oil sealed and self-lubricated made by reputed company to be approved by Engineer-incharge. Equipment to be fitted with inbuilt limiter to prevent unwanted movement. Safety 3-layer packaging like 1st EPE Foam 2nd HDPE Film and 3rd is Stretch wrap. All complete as per direction and approval of engineer-in-charge regarding material,shape of equipment, colour on metal, seat and base pedal and fixing of equipment etc The equipment to be fixed on ground with concrete of strength M-25 and J shaped welded bolt and ones the concrete is set, fix the equivalent on to it and cover nuts and bolts with the base plate cover. |
| 62 | Supply of multipurpose M.S pole for badminton/volleyball duly painted in a pair (two in one type) made out 50mm. dia heavy duty pipe along with base socket in a pair heavy duty type of size 450 X 450x3.0mm including all necessary fixtures fittings.easy moving on 2 Double PU Wheels which are non marking braned wheels to help protect floors |
| 63 | Supply of cotton base badminton net of size 0.75 X 6.10mtr in required color and standard shape with all necessary fixtures. |
| 64 | Supply of 100% pure virgin U.V. treated water proof 170 GSM colored tarpaulin plastic sheet cover with reinforced edges & rust free rivets to cover the court of size 15.00mtr x 7.50mtr. |
| 65 | Providing and fixing Fully Retro Reflective type informatory stainless steel (304 Grade) sign board of size 1200x900mm with back support frame made of 32mm x 1.6mm S.S Square tube attached with 1 no. S.S vertical post of 50mm dia, 1.6mm thick & 3.0mtr long. The face of S.S Frame fully covered with 4mm thick ACP Sheet pasted with approved reflective base, matter and logo etc., complete board to be fixed in ground /surface in C:C block (1:2:4) of size 500x500x500mm (Deep) after necessary excavation holes work at site. All complete as per the direction of engineer in charge. |
| 66 | Providing and laying if ITF classified 10 layers “pace court” synthetic Acrylic color coating for outdoor games. |
| 67 | Supplying and providing chain link fencing 2.60 M height : Fabrication supply and fixing 50mm Dia B Class GI pipe at an interval of 2.00m c/c in foundation of 45x45x45 cm in cement concrete 1:4:8 using 40mm broken stone stone fabrication supply and fixing frame of over all size 2.00m x 2.60m made out of M.S. Angles 30x30x5mm, with one vertical support at middle (20 x 6 mm ms Flat ), fixing GI chain liink fabric fencing of 2.00M width and 2.60m Height in mesh size 50x50mm made of GI wire of 4mm, PVC coated to achive outer dia not less than 5mm in required colour and shade drilling holes on the angle and M.S. Flat @ 30Cm intervals fixing chain link to the frame using bolts, nut, washers at all sides including fixing of frame into GI posts, cost inclusive of all material, cutting angles and flats to required lenght, welding, drilling necessary holes on the angle iron and flat , labour and all other charges fabrication and fixing, applying coats os synthetic enamel paint of approval quality and colour after applying a coat of zich rich primer etc. complete ae per direction of engineer in charge and drawing,( earth work and concrete will be measured saparetely Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
