|
| 1 | Fire Protection System |
| 2 | OD353217/2025-2026Supplying, installation,testing and commissioning ofelectric driven terrace pump suitable for automatic operationand consisting of following,complete in all respects, asrequired: (Terrace Pump) a.Horizontal type, multistage,centrifugal, split casing pump ofcast iron body & bronze impeller with stainless steel shaft, mechanical confirming toIS : 1520b. Suitable HP squirell cageinduction motor TEFC typesuitable for operation on 415volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-F; insulation, conforming to IS-325.c. M.S.fabricated common baseplate,coupling, coupling guard,foundation bolts etc.as required.d. Suitable cement concrete foundation duly plastered andwith anti vibration pads.1350 lpm at 35 M head. |
| 3 | 18.7.1Providing, laying, testing and commissioning of C class heavy duty M S Pipe conforming to IS 3589,IS 1239 i/c welding ,fittings, like elbows, tees, flanges, tapers, nuts ,bolts ,gaskets etc., and fixing the pipe on the wall , ceiling with suitable clamp or support frame and painting with two or more coats of synthetic enamelpaints of required shades complete as required:25 mm dia |
| 4 | 18.7.2Providing, laying, testing and commissioning of C class heavy duty M S Pipe conforming to IS 3589,IS 1239 i/c welding ,fittings, like elbows, tees, flanges, tapers, nuts ,bolts ,gaskets etc., and fixing the pipe on the wall , ceiling with suitable clamp or support frame and painting with two or more coats of synthetic enamelpaints of required shades complete as required:32 mm dia |
| 5 | 18.7.3Providing, laying, testing and commissioning of C class heavy duty M S Pipe conforming to IS 3589,IS 1239 i/c welding ,fittings, like elbows, tees, flanges, tapers, nuts ,bolts ,gaskets etc., and fixing the pipe on the wall , ceiling with suitable clamp or support frame and painting with two or more coats of synthetic enamel paints of required shades complete as required:40 mm dia |
| 6 | 18.7.4Providing, laying, testing and commissioning of C class heavy duty M S Pipe conforming to IS 3589,IS 1239 i/c welding ,fittings, like elbows, tees, flanges, tapers, nuts ,bolts ,gaskets etc., and fixing the pipe on the wall , ceiling with suitable clamp or support frame and painting with two or more coats of synthetic enamelpaints of required shades complete as required:50 mm dia |
| 7 | 18.7.5Providing, laying, testing and commissioning of C class heavy duty M S Pipe conforming to IS 3589,IS 1239 i/c welding ,fittings, like elbows, tees, flanges, tapers, nuts ,bolts ,gaskets etc., and fixing the pipe on the wall , ceiling with suitable clamp or support frame and painting with two or more coats of synthetic enamelpaints of required shades complete as required:65mm dia |
| 8 | 18.7.6Providing, laying, testing and commissioning of C class heavy duty M S Pipe conforming to IS 3589,IS 1239 i/c welding ,fittings, like elbows, tees, flanges, tapers, nuts ,bolts ,gaskets etc., and fixing the pipe on the wall , ceiling with suitable clamp or support frame and painting with two or more coats of synthetic enamelpaints of required shades complete as required:80mm dia |
| 9 | 18.7.7Providing, laying, testing and commissioning of C class heavy duty M S Pipe conforming to IS 3589,IS 1239 i/c welding ,fittings, like elbows, tees, flanges, tapers, nuts ,bolts ,gaskets etc., and fixing the pipe on the wall , ceiling with suitable clamp or support frame and painting with two or more coats of synthetic enamelpaints of required shades complete as required:100mm dia |
| 10 | 18.12.4Supplying, fixing, testing and commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle ,bronze or gun Metal seat, ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 780 of following sizes as required:80mm dia |
| 11 | 18.12.5Supplying, fixing, testing and commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle ,bronze or gun Metal seat, ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 780 of following sizes as required:100mm dia |
| 12 | 18.14.5Providing,installation,testing and commissioning of non-return valve of following sizes conforming to IS :5312 complete with rubber gasket, GI bolts , nuts, washers etc as required.100 mm dia |
| 13 | 18.16.2Supplying and fixing 63 m dia,15m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required: Stainless steel (Grade 304) |
| 14 | 18.17.1Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. a) 20 mm nominal Internal dia water hose thermoplastic(Textile reinforced) type-2 as per IS:12585 b) 20 mm nominal internal dia gun metal globe valve &nozzle c) Drum and brackets for fixing the equipments on wall.d) Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.30 m |
| 15 | 18.18.2Supplying and fixing 63 mm dia gun etal short metal branch pipe ith 20 mm nominal interanal diameter size nozzle conforming to IS 903 suitable for Instantaneous connection to Interconnect hose pipe coupling as required:Stainless steel (Grade 304) |
| 16 | 18.19.1Supplying and fixing fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia M.S. Pipe connection conforming to IS 904 as required:2 way-100 mm dia M.S.Pipe |
| 17 | 18.21.1Providing,fixing, testing and commissioning of 15 mm dia quatzoid bulb type sprinklers of rating 68 degree centigrade with required accessories :Pendent Sprinkler |
| 18 | 18.21.3Providing,fixing, testing and commissioning of 15 mm dia quatzoid bulb type sprinklers of rating 68 degree centigrade with required accessories :Horizontal side wall sprinkler |
| 19 | 18.22Providing and fixing of pressure switch in MS pipeline including connection etc as required: |
| 20 | 18.9.2Supplying and fixing single headed internal hydrant valve with instantaneous Gun metal or stainless steel coupling of 63mm dia with cast iron wheel ISI marked conforming to IS 5290(Type A) with blank Gun metal or Stainless steel cap and chain as required: Single headed stainless steel |
| 21 | 17.1.3FIRE DETECTION AND ALARM SYSTEM (CONVENTIONAL) Supplying, installation, testing & commissioning of manual call boxes of MS Construction in surface/recess with stainless steel chain & hammer assembly Complete with glass and push button etc. as required. |
| 22 | OD373403/2025-2026Supply & Installation of Hose cabinet made of 16 gauge MS Sheet. and marked "FIRE HOSE" on outside with door and locking arrangements, suitable to accommodate of hose pipe along with one pair of male and female coupling and one branch pipe, suitable for wall mounting/pedestal type. The cabinet shall be painted to scarlet red colour outside and off-white inside. Thepedestal shall be made of MS Supports and mounted on ground. |
| 23 | OD373454/2025-2026Supply, installation, testing and commissioning of approved make 25 mm dia automatic air release valve. |
| 24 | OD373467/2025-2026Supply, Installation, Testing and Commissioning of forged Brass Ball valves (PN 25) with fittings of screwed end type. |
| 25 | OD373476/2025-2026Supply, Installation, Testing and Commissioning of Pressure gauge of suitable range for pump sets. Glycerine filled 100mm dia pressure gauges to use on pump discharge & test lines. Cost shall be inclusive of cock, short pieces, nipples etc as required |
| 26 | OD373491/2025-2026FIRE ALARM PANEL:- Supply, installation, testing and commissioning of Control Panel of 4 Zonecomplete with charger, rectifier, alarm display with all other necessary attachments with Battery |
| 27 | OD373498/2025-2026Supply, installation, testing and commissioning of audio alarm hooter etc as required. |
| 28 | OD373647/2025-2026 Supply and installation of CO2 type Fire Extinguishers of following capacity - 2kgConforming to IS:13849 with initial gas, filled in steel cylinders, safety valve mounting bracket etc. complete. The Extinguisher is manufactured strictly as per IS:15683:2018. |
| 29 | OD373648/2025-2026Supply and Installation of ABC type fire extinguisher of 5 Kgs.IS 4308. Capacity with initial filling in brand new cylinder with powder coated finish, discharge hose, wall mounting bracket etc. complete. The Extinguisher is manufactured strictly as perIS: 15683:2018. |
| 30 | OD373725/2025-2026Supply and providing Assembly point -sign board LED / Egress Edge lit lights with rechargeable battery, white powder coated housing, having input voltage of 230V 50Hz. |
| 31 | OD373726/2025-2026Supply and Installation of self-glowing type single side Sign Boards made out of 3mm thick \\"Opaque\\" PVC foam board having minimum SIZE:- 100 X 300 MM The Sign boards shall be hanged with chain and reading as FIRE EXIT/EXIT/FIRE EXTINGUISHER/MANUAL CALL POINT/FIRE BREAK |
| 32 | 1.17.2Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required. 2 x 1.5 sq. mm |
| 33 | 1.17.3Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required. 3 X 1.5 sq.mm |
| 34 | 1.17.5Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required. 5 X 1.5 Sq. mm |
| 35 | 1.21.1Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm |
| 36 | 1.21.2Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm |
| 37 | 90.12.41.6Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured copper power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3 core 6 sq mm with factory made clamp |
| 38 | 90.12.7.39Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good thedamages , colour washing etc. as required.4 core 6 sq mm with factory made clamp |
| 39 | 90.14.1.2Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623. Fabrication of fully partitioned, dust and vermin proof enclosure for panel assemblyas per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar inter connection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame) |
| 40 | 9.1.32Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KVgrade as required.4 X 10 sq. mm (25mm) |
| 41 | OD374115/2025-2026Supplying and providing copper earth clamps for siemens/ tropodur type cable glands of suitable length and other dimensions noted along with each size of glands for the following sizes of cables as required.4sqmm-16 sq mm with 12 mm wide x 1mm thick clip |
| 42 | 90.14.10.3Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.16 A-100A, 16 kA (Ics=100%Icu), 4 pole,current limiting type MCCB having thermal setting range of 80 - 100% with thermal magnetic release having adjustable OL |
| 43 | 90.14.11.14MCCB AccessoriesSupply and fixing rotary handle, Direct type (including BUC handle with door interlock ) in the existing MCCB of rating up to 250 A |
| 44 | 90.14.2.2Supply and providing 3mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut & bolt etc. |
| 45 | 90.14.3.1Supply and providing heavy duty section neoprene gasket in the panel board section neoprene beeding suitable for 1.60/ 2.00 mm sheet |
| 46 | 90.14.5Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board |
| 47 | OD373869/2025-2026Supply and providing selector switch on the enclosure and giving connection etc as required. |
| 48 | OD373870/2025-2026Supply and providing Add on module and giving connection etc as required . |
| 49 | OD373871/2025-2026Supply and providing 55A 4 pole power contactor on the existing enclosure and giving connection etc as required . |
| 50 | OD373959/2025-2026Supply and providing 0.5A to 2 A SP MCB on the enclosure and giving connection etc as required . |
| 51 | OD373872/2025-2026Supply and providing spreader terminals suitable for MCCB upto 100A |
| 52 | OD373873/2025-2026Supply and providing multi function meter to read VAF 3 phase accuracy class 1 on the existing main board and giving connection etc as required . |
| 53 | OD374024/2025-2026Supply and providing resin cast 100/5 A metering CT on the existing enclossure and giving connection etc as required . |
| 54 | OD374106/2025-2026Supply and providing Auxiliary contactor for control relay 2 nos + 2 NC, 415V, (L&T/ C&S make) and giving connection etc as required . |
| 55 | 1OD374107/2025-2026Supply and providing Flush head push button with LED illumination on the existing enclossure and giving connection etc as required . |
| 56 | OD374108/2025-2026Supply and providing Red,green ,black ,orange etc colour LED on the existing enclossure and giving connection etc as required . |
| 57 | OD374109/2025-2026Supply and providing Blue colour LED on the existing enclossure and giving connection etc as required . |
| 58 | 90.14.7Supply and providing copper earth bus in the panel board |
| 59 | 90.16.1.3Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG) |
| 60 | 90.16.5.3Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG) |
| 61 | OD374133/2025-2026Supply and providing 25x6 mm brass bolt with nut and washer etc as required. |
| 62 | OD374162/2025-2026Supply testing and commissioning of 2 KVA Sine wave UPS, IGBT rectifier and inverter with Input Voltage Range 160V-300V, Input Frequency 50Hz, Output Volts 230V, , with external batteries 2Nos 100AH 6EL, Front Display LCD Indicator MainsON/On Batt./Low Battery/Fault/Overload, Alarm ON Batt. /Fault, Over load,including battery stand connection cable etc , warranty not less than 3 years for UPS and 4 years for battery . Please Enable Macros to View BoQ information |
