|
| 1 | Sch 'A' Part-I (B/R works)Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 sqm and not exceeding 4.0 sqm each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt, complete all as specified and directed. |
| 2 | Taking down chowkats or frames with Wooden/PVC/Flush shutters (without taking off shutter from frames) not exc. 1.5 sqm each, including cutting holes for removing the hold fast etc, also including disposing off the retrieved debris outsite the premises, complete all as specified and as directed. |
| 3 | Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water, complete all as specified and directed. |
| 4 | Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level), complete all as specified and directed. |
| 5 | Dismantling floor , hearth or wall tiling including cement mortar bedding, removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed. |
| 6 | Taking down old unserviceable GI pipe of 15mm bore with all fittings etc, complete all as specified and directed. |
| 7 | Taking down old unserviceable GI pipe of 20mm bore with all fittings etc, complete all as specified and directed. |
| 8 | Dismantling water tanks and removing to store exc 250 & not exc 500 ltrs of capacity, complete all as specified and directed. |
| 9 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings sheets in roof, complete all as specified and directed. |
| 10 | Demolition of Brickwork or stone/ boulder masonry, for portions ordered to be dismantled , built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed. |
| 11 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulaton boards/slabs/blankets, any thickness, including cover fillets, complete all as specified and directed. |
| 12 | M&L for walling of random rubble, uncoursed, well bonded, bedded solidly hearted, built in cement mortar (1:6), complete all as specified and directed. |
| 13 | M&L for 30mm thick factory made 2nd class hard wood plain framed panelled shutter (any No.of panels), with panels of timber flat on both sides (feather edged ) or of veneered particles board medium density ,wood particle board with commercial face veneers, supplied and fixed to chowkat, complete all as specified and directed. |
| 14 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification & drawing, complete all as specified and directed. |
| 15 | S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing, complete all as specified and directed. |
| 16 | S & F 100 mm long stainless steel butt hinges, medium weight cold rolled, complete all as specified and directed. |
| 17 | S & F 150 mm long aluminium anodised barrel tower bolt of extruded section, complete all as specified and directed. |
| 18 | S&F aluminium alloy anodised sliding door bolt with fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed of size 200 mm, complete all as specified and directed. |
| 19 | S&F 100mm long Extruded Aluminium anodised alloy handles, fabricated type, complete all as specified and directed. |
| 20 | S&F steel ventilator with top hung shutter including hinges steel peg stay, complete all as specified and directed. |
| 21 | S & F 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane, complete all as specified and directed. |
| 22 | M&L for rendering 15 mm thick in CM (1:6) on fair faces of brick work or concrete surface finsihed even and smooth (without using extra cement) etc, complete all as specified and directed. |
| 23 | M&L for Rendering 15mm thick on fair faces of brick works or concrete surfaces in CM 1:4 and finished even and smooth without using extra cement including mixing of water proofing compound, complete all as specified and directed.Note:- WPC shall be measured and paid separately. |
| 24 | Supply only water proofing compound (Liquid) confirming to IS, complete all as specified and as directed. |
| 25 | M&L preparing new surfaces of walls for applying two coats of oil emulsion distemper (oil bound distemper) over a coat of primer, complete all as specified and directed. |
| 26 | M & L for preparation of newly plastered surfaces of walls and applying two coats of exterior weather coat paint of two or more colours (multi colour pattern as approved by GE) over and including a coat of primer, complete all as specified and directed. |
| 27 | M&L for PCC type B-0, (25 mm thick), 1:2:4 (using 12.5 mm graded stone aggregate) in sub base/ levelling course, complete all as specified and directed. |
| 28 | M&L for Non-skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM (1:4), complete all as specified and directed. |
| 29 | M&L for glazed ceramic coloured tiles of size 450 x 350 x 7mm thick, (premium quality) on vertical surface of wall such as dado, skirting, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 15mm thick screed bed in CM (1:4), complete all as specified and directed. |
| 30 | Supplying and laying of 16mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings onwalls/ceiling or laying in floors, complete all as specified and directed. |
| 31 | Supplying and laying of 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings onwalls/ceiling or laying in floors, complete all as specified and directed. |
| 32 | S&F rotational moulded polythene 2 layered white/Black colour water storage tank (Cylindrical vertical withclosed top)hoisted and fixed in position of 1000 ltrs capacity fixed with PVC tank nipples, complete all as specified in SSR Part I, complete all as specified and directed. |
| 33 | S&F (in repair) Vitreous china wash down water closet pan (pedestal pattern), white including trap connection to drain(or outgoing pipe) and to flusing pipe, antisyphonage pipe etc., complete with seat and cover for pedetal pan, complete all as specified and directed. |
| 34 | Supply and fixed in repair for only 10 litres capacity PVC, valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed. |
| 35 | S&F in repair vitreous China wash basin, white, flat back, size 550 x 400mm excluding tap, chain, plug but including for fixing of taps, waste fitting, brackets and cutting for and pinning in ends of brackets but fixed, complete all as specified and directed. |
| 36 | S&F in repair wall mixture with provision for overhead shower with 115mm long bend pipe on upper side, connecting legs and wal flange of 15mm bore etc, complete all as specified and directed. |
| 37 | S&F as (in repair) swivel shower of brass chromium plated with long head for fixing with 15 mm pipe, complete all as specified and directed. |
| 38 | S&F in repair for 15mm bore Angle Stop valve, fancy type, heavy duty, cast copper alloy, chromium plated, screwed down and screwed for iron pipe, complete all as specified and directed. |
| 39 | S & F in repair for of 15 mm bore fancy type Pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as specified and directed. |
| 40 | S & F in repair for 15mm bore chromium plated bib tap, cast coper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed. |
| 41 | S&F (in repair) Chromium plate tubular towel rail, 20mm dia, D type, 60cm long between flanges, complete all as specified and directed. |
| 42 | S & F Soap dish, vitreous China white of size 160x 160x90mm, complete all as specified and directed. |
| 43 | S&F PVC connection 15mm size, 450mm long with PTMP nuts both side, complete all as specified and directed. |
| 44 | S&F in repair for 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors,complete all as specified and directed. |
| 45 | S&F in repair for PVC (SWR) floor trap 75mm, plain with grating including jointing with solvent cement, complete all as specified and directed. |
| 46 | S&F in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement, complete all as specified and directed. |
| 47 | S&F in repair for 110mm PVC (SWR) bends any radius, complete all as specified and directed. |
| 48 | S & F in repair for PVC (SWR) 110 mm junction piece single, (Single Y) equal or unequal, complete all as specified and directed. |
| 49 | M&L for providing 75 mm thick cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection laid in alternate bays (not exc 2 Sqm each ) and finished even and fair without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight, complete all as specified and directed. |
| 50 | M&L for 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 51 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of approved colour (multi colour pattern as approved by GE) having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc, complete all as specified and directed. |
| 52 | S&F Pre-painted galvalumealuminum zinc coating GI based Plain steel sheet 0.50mm thick of approved colour (multi colour pattern as approved by GE) having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc, complete all as specified and as directed. |
| 53 | S&F on site LLDPE septic tank designed to carry sewage and sludge water, excn in any type of soil, PCC 1:4:8 below fdn, vent shaft connection etc complete for 20 users capacity, complete all as specified and as directed. |
| 54 | M&L for sokage wells excn, in any type of soil, fdn in PCC 1:3:6, walls of honey combed masonry with top ring of RCC-1:2:4 concrete incl intercepting chamber and screen chamber made of brick masonry in CM, RCC cover slab in RCC/ SFRC cover, interconnecting pipes of RCC/ DWC complete filled with bricks bats o size 1.8 M dia x 3 mtr efective depth (Drg noCE/TD-1202/2003 Sheet No 1/2), complete all as specified and as directed. |
| 55 | Excavation in trenches n exc 1.5m wide and n. exc 1.5m deep and getting out in soft/ loose soil for shafts, wells, manholes etc n exc 10sqm on plan for sewage line & foundation etc, complete all as specified and as directed. |
| 56 | Demolition and breaking up existing sewage (SGSW/ AC pipes and the like, 150mm bore set in cement morter and removing demolised material to a distance exc 50m and n exc 100m, complete all as specified and as directed. |
| 57 | M&L for concrete bed PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) to RCC NP-2 pipe 200 mm bore including packing under and haunching against the sides of pipes after they are laid and tested, complete all as specified and as directed. |
| 58 | Supplying and laying Reinforced concrete pipes bore of pipe in 200 mm dia, class NP2, laid and jointed complete with collars, complete all as specified and as directed. |
| 59 | M&L for 75mm thick cement concrete type C-2,1:3:6 (using 40mm graded stone aggregate) as in sub base etc, complete all as specified and as directed. |
| 60 | M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and no pigment laid over & including 25mm thick sand cusion, complete all as specified and as directed. |
| 61 | M&L for Chequered cement concrete tiles of size 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in path with grey cement and no pigment, complete all as specified and as directed. |
| 62 | M&L for providing & fixing of 4mm thick designer ceiling board (Make : Everest/Ramco/Everest) in ceiling fixed with screw as per manufactures instructions, laid on hot dipped galvanized iron imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33mm thick galvanized steel sheet & of size 24x32x300mm and spaced at 12mm centres securely fixed to the structural soffits by approved hangers at 1200mm maximum centres. Hangers of GI wire 4mm dia to be fixed by approved rowl plug, level adjusters and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall flush fitting of 1200 long cross tee with (double stitching) to be inter locked between main runners at 600mm centre to from 1200x600mm modules cross tee longer than 600mm modules to be formed by fitting 600mm long cross tee, tee perimeter wall angle shall be of 0.45mm thick galvanized steel of size 19x19mm and 300mm long of white colour all as per instruction, complete all as specified and as directed. |
| 63 | S&F Factory made MS tubular Box type window/ventilator of MS rolled steel section conforming to IS-1038 and shall be ISI marked manufactured by ISI approved manufacturer, openable frames shall be fabricated of sections as approved by Engr-in-Charge corner welded to form a solid fused welded joint handles shall be of z section welded with openable frame box steel section(Consisting of both shutter glazed shutter and gauge shutter complete) used in outer frame shutter frame and central frame shall be ERW section of 16 gauge with fixing lugs to be fixed as per provision of IS-1038 except that top lugs shall not be provided , all shutters of windows shall be provided with 4 Nos friction free hinges, 2 Nos 75 mm tower bolts to each leaf of window one at top and one at bottom welded on 3 mm thick steel sheet piece of suitable size which shall be in turn welded to z section f steel window to provide suitable arrangement of using tower bolt and 1 nos bow handle in each shutter. Glazed shutter and , gauged shutter of window , mild steel casement stays 300 mm with hinged joint and two plates with studs complete all as specified with all fittings and fixtures without glazing bars, 3mm sheet glass in glazed shutter and , GI wire mesh,of 0.56 nominal dia and average width of aperature 1.18 mm in gauged shutter, etc, complete all as specified and directed. |
| 64 | S&F framed work as in doors or gates of angles or other section with gusset plates, rails, braces etc., complete, by using Fe 410-W (Gde E-250) quality a drilled for mixing of steel sheetion or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitting (including 1.6 mm th MS plain back steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing, complete all as specified and directed. |
| 65 | M&L for PCC 75 mm thick type C-2 ,1:3:6 (using 40mm graded crushed stone aggregate) as in sub base of floor, complete all as specified and directed. |
| 66 | M& L for providing kota stone slab flooring 18-20 mm thick over and including 20 mm thick screed in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment including cutting, complete all as specified and directed. |
| 67 | M & L for applying two or more coats of100% premium acrylic emulsion paint having VOC less than 50 gm /litre and UV resistance as per IS 15489:2004 alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces, complete all as specified and directed. |
| 68 | M&L for Pre-cast factory maded cement concrete (Type C-1) 1:3:6, (using 20 mm graded crushed stone aggregate) block masonry with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6, complete all as specified and directed. |
| 69 | M&L for providing and injecting post anti termite Treatment of soil under existing floors using emulsion @ one litre per litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors, complete all as specified and directed.Note: The treatment work shall be carried through authorised agencey only. |
| 70 | M&L for preparation of old steel surfaces of any description, over 10cm in width or girth, not otherwise described for one coat of Synthtic Enamel paint, complete all as specified and directed. |
| 71 | Extra for forming fair finished channel or drain 30cm girth (inner girth) in cement concrete using extra cement incl forms, moulds, stopped end, etc, complete all as specified and directed. |
| 72 | M&L for Cement concrete in drain in 1:3:6 type C2, (using 40mm graded stone aggregate), complete all as specified and directed. |
| 73 | M & L for Hardcore of guage exc 63 mm but n exc 100 mm,(broken stone or boulders) deposited, spread and levelled in layers n exc 15 cm thick, watered and rolled/rammed to a true surface, complete all as specified and directed. |
| 74 | M&L for minimum 60 mm thick precast PCC interlocking blocks of grade M-35 single layer monolithic high density manufactured by electro vibro hydraulically operated block making machine confirming to IS-15658 : 2006 in equal proportion of grey and coloured tile to make a pattern as directed, laid over and including 50 mm thick sand cusion, complete all as specified and directed. |
| 75 | M&L for Providing and laying at near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required, complete all as specified and directed. |
| 76 | Dismantling water tanks and removing to store exc 500 & not exc 1000 ltrs of capacity, complete all as specified and directed. |
| 77 | M&L for rendering 5mm thick on concrete surfaces of ceiling or chajja etc in cement morter 1:3 finished even and smooth without using extra cement, complete all as specified and directed. |
| 78 | M&L for preparing new plastered surface of ceiling surface and applying two coats of white wash etc, complete all as specified and directed. |
| 79 | S&F rotational moulded polythene 2 layered white/Black colour water storage tank (Cylindrical vertical withclosed top)hoisted and fixed in position of 500 ltrs capacity fixed with PVC tank nipples all as specified in SSR Part-I, complete all as specified and directed. |
| 80 | S&F in repair vitreous China squatting pan, `Orissa' pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe), complete all as specified and directed. |
| 81 | S & F in repair for PVC (SWR) 110 mm junction single, (Single T) equal or unequal, complete all as specified and directed. |
| 82 | M&L for cement 1:5:10 (using 40mm graded granite stone aggregate) in sub base for laying of sewage pipe, complete all as specified and directed. |
| 83 | M & L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of granite, complete all as specified and directed. |
| 84 | S&F in repair for 150mm long Extruded Aluminium anodised alloy handles, fabricated type, complete all as specified and directed. |
| 85 | M&L for brick work with sub class 'B' bricks of old size, straight or curved on plan exc 6m mean radius built in cement morter 1:6, complete all as specified and directed. |
| 86 | Excavating in post holes, (or similar holes), each n. exc 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n. exc 25cm, complete all as specified and directed. |
| 87 | M&L for steel as in framed work such as grills, gratings, etc with ends of bars shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters walk ways, railings, frame work of water tanks and similar work, conforming to Fe. 290, Gde E-165, complete all as specified and directed. |
| 88 | M&L for cement concrete in foundations, filling and mass concrete type C-2 (1:3:6) (using 40mm graded stone aggregate), complete all as specified and directed. |
| 89 | Construction of septic tank of capacity 50 users with RCC cover slab in M-25 (Design Mix), brick work in CM 1:4 (with top of slab at ground level) includng excavation in any type of soil PCC 1:2:4 in type B-2 in foundation, cover vent shaft, connection etc including returning, filling of soil well ramming in, layers and removing excavated surplus soil to a distance not exc. 50m, RCC cover slab with angle iron frame, complete all as specified and directed.Note: Ref drawing No CE/TD 1202/2008, Sheet No 1/2 to 2/2. |
| 90 | M&L for sokage wells excn, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of RCC 1:2:4, concrete including intercepting chamber and screen chamber made of brick masonry in CM, RCC cover slab in RCC/ SFRC cover, interconnecting pipes of RCC/ DWC, complete filed with bricks bats of size 2.4m dia x 4.5m effective depth, complete all as specified and directed.Note: Ref drawing No CE/TD 1202/2003, Sheet No 1/2. |
| 91 | Providing precast cement concrete type B-1 1:2:4 (using 20mm graded stone aggregate) as in landing, cover slab (for manholes etc) chullah woods, chajjas, water trough mangers, shelves and similar articles with plain faces set in cement mortar 1:4, complete all as specified and directed. |
| 92 | Sch 'A' Part-II (E/M works)Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete including fittings and fixtures such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc removing materials for taking credit (credit for above items should be amde as per conditions seperately) and making good the disturbed surfaces of walls, floor or ceiling etc to match with existing specifications, complete all as specified and directed. |
| 93 | M&L for point wiring for one light point/ fan point/ one bell/ buzzer point controlled by one switch with 1.5 sqmm PVC insulated FRLS unsheathed copper conductor two single core multi strand flexible cable and 1.5sqmm PVC insulated FRLS unsheathed copper conductor singel core cable (green colour) as earth lead and including PVC conduit 25mm dia along with modular sunken boxes of required size with modular white cover plate with frame including cutting chaes to wall making good the disturbed surfaces to mathc with the existing specificaiton, complete all as specified and directed.Note: The colour coding of wiring to be followed as Red/ Yellow/Blue Phase/Neutral/ Earth respectively . |
| 94 | All as per Item No 93.00 here-in-before but for socket outlet 5 Amp on same board. |
| 95 | All as per Item No 93.00 here-in-before but for socket outlet 5 Amp on independent board. |
| 96 | All as per item No 93.00 here-in-before, but for one 3 pin 15 Amp socket outlet independent with 2.5 sqmm PVC insulated FRLS multistranded copper cable with 2.5 sqmm single core multistranded FRLS copper cable as earthling lead. |
| 97 | S&F modular switch piano, 1 module, 6 Amps SP one way 230 volts, complete all as specified and directed. |
| 98 | S&F modular switch piano, single pole, one way 16 Amps 240 volts, complete all as specified and directed. |
| 99 | S&F modular socket outlet 2/3 pin, 2 module, 6 Amps, 230 volts, ISI marked, complete all as specified and directed. |
| 100 | S&F modular socket outlet, multipurpose, 6/16 Amps, 6 Pin, 2 module, 230 volts, complete all as specified and directed. |
| 101 | M&L for point wiring with two single core 1.5 sqmm (nominal cross section area FRLS PVC insulated unsheathed copper conductor cable and one single core 1.5 sqmm (nominal cross section area) FRLS PVC insulated unsheathed 1100 Volts, grade multi stranded copper conductor cable as earth continuity to common earth and connecting to earth dolly running in and including medium grade rigid non metalic PVC concealed conduit 25mm dia in wall after cutting chases in wall including cast iron or pressed steel terminal box covered with and including 3mm thick bakelite sheet top cover fixed flush with wall using brass screws, washers and all requisite accessories such as PVC elbow, Tee, collars, bends etc for mounting switches, socket, fan regulators etc for one light/ fan exhaust fan point controlled by one way switch 6 Amp, complete all as specified and directed.Note: The colour coding of wiring to be followed as Red/ Yellow/ Blue Phase/ Neutral/ Earth respectively. |
| 102 | All as per Item No 101.00 here-in-before but for socket outlet 5 Amp on same board. |
| 103 | All as per Item No 101.00 here-in-before but for socket outlet 5 Amp on independent board. |
| 104 | All as per item No 101.00 here-in-before, but for one 3 pin 15 Amp socket outlet independent with 2.5 sqmm PVC insulated FRLS multistranded copper cable with 2.5 sqmm single core multistranded FRLS copper cable as earthling lead. |
| 105 | S&F for switch piano flush type 5 Amps SP one way 230 volts, complete all as specified and directed. |
| 106 | M&L for socket outlet 2 in 1, 5 Amps, 5 Pin, flush type, 230 volts, complete all as specified and directed. |
| 107 | S&F for switch socket combination 2 in 1, 15 Amps, 5 Pin, flush type, 230 volts, complete all as specified and directed. |
| 108 | M&L for ceiling rose surface bakelite 3 terminals, PVC/ Polycarbonate, isolated body, complete all as specified and directed. |
| 109 | S&F bell ding dong by one push button, AC, 230v complete all as specified and directed. |
| 110 | S&F modular bell push switch 6A, 1 module, complete all as specified and directed. |
| 111 | S&F in repair modular fan regulator electronic, step type hum free suitable to control speed of fan from 0 to 100%, 240 volts AC and connecting electrically complete all as specified and directed. |
| 112 | S&F in replacement LED Tube light fitting, 1x 20 watts. Decorative ultra slim linear LED lighting fixture with co extruded polycarbonate body, environmental friendly, energy efficient ready to use pack complete rewired, Premium 20 W LED batten, connecting electrically to ceiling rose to fitting using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core, including removing old/unsv, complete all as specified and directed. |
| 113 | S&F in replacement LED luminaire 600 x 600 mm, 36 watt, 220 Volts, AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivber, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size, complete all as specified and directed. |
| 114 | Supply and fixing in replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed. |
| 115 | Supply and fixing in replacement LED light fitting 1 x 10w bulkhead luminaires including LED light driver holder, connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed. |
| 116 | S&F environmental friendly, ultra modern, energy saving, surface mounted, decorative oval plastic bulk head 10 watt 6000K LED luminaire comprising of high brightness LEDs, IP-54 protection including connecting electrically using cord flexible 3 core PVC insulated overall sheathed with flexible copper conductor of size 0.75sqmm, including removing old/ unserviceable, complete all as specified and directed. |
| 117 | Taking out unserviceable ceiling fan and deposit to MES store, supply and replacement with ceiling fan 230volt 50Hz, AC, 1200mm sweep, min air delivery 210CFM with service value 6.00 BEE, five star rated with brushless direct current motor (BLDC) complete with hanging arrangement by down rod and electronic regulator alongwith steel wire rope for additional safety in ceiling fan with all allied accessories and connecting up with three core 0.75sqmm PVC insulate copper conductor cable, complete all as specified and directed. |
| 118 | M&L for exhaust fan, sturdy Engineering plastic complete with 4 blade, heavy duty, double ball bearing, 230V, 50Hz, 250mm sweep having power input 70W speed 1200RPM, with protective bird guard including connecting with three core, 0.75 sqmm PVC insulated copper conductor cable complete all as sepecified and directed. |
| 119 | M&L in replacement sheet metal enclosure MCB distribution board, double door single pole and neutral with IP-66 protection single phase 240 volts 4 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete as in repair, including removing old/unsv, complete all as specified and directed. Note:- MCBs will be measured separately. |
| 120 | M&L in replacement sheet metal enclosure MCB distribution board, double door single pole and neutral with IP-66 protection single phase 240 volts 8 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete, complete all as specified and directed. Note:- MCBs will be measured separately. |
| 121 | M&L for MCB single pole and neutral 240 volts any rating upto 32Amps, with rupturing capacity 10 KA, including providing thimble for out going cables, including removing old/unsv, complete all as specified and directed. |
| 122 | M&L for MCB Single Pole 240 volts any rating upto 5 to 32 Amps, 240Volt, 10 KA, 'B' curve in the DB complete with connection, testing and commissioining, complete all as specified and directed. |
| 123 | Supply and fix in replacement electric water heater, storage type stainless steel body with copper inner tank and heating element of 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc, complete all as specified and directed. |
| 124 | M&L in replacement submain wiring with 2 single core, PVC insulated unsheathed FRLS flexible copper conductor cable of size 6sqmm and one single core PVC insulated unsheathed FRLS flexible copper conductor cable (green colour) of size 6 sqmm as earth lead and including PVC casing caping/ non metalic rigid PVC conduit medium grade and making good the disturbed surfaces to match with the existing specification all as required at site, complete all as specified and directed. |
| 125 | Supply, laying and testing in replacement cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core, complete all as specified and directed. |
| 126 | Supply, laying and testing in replacement cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 2 core, complete all as specified and directed. |
| 127 | Excavation in trenches not exceeding 1.5 mtr wide and not exc 1.5 mtr depth for laying of cables, pipe lines, protection pipes and foundations etc and getting out in soft/loose soil, complete all as specified and directed. |
| 128 | Returning filling in soil including spreading leveling watering and well rammimg in layer n exc 25cm, complete all as specified and directed. |
| 129 | Removing excavated soil not exc 50 mtr ant depositing where directed at a level not exc 1.5 mtr above the starting point, complete all as specified and directed. |
| 130 | Supply and filling in and speading unwashed river sand for cushioning and covering the under ground cables in trenches and punning to provide required cover complete all as specified in SSR Part-I, complete all as specified and directed.Note: Punned thickess i.e 18 cm shall be measured for payment purpose. |
| 131 | M&L for sub class ‘B’ Bricks old size, laid dry flat over the cable butting each other length of cable equal to width of brick, complete all as specified and as directed. |
| 132 | M & L in replacement for earthing with galvanised steel earth plate electrode 600mm x 600mm x 6 mm burried directly in ground earth pit not less than 2.25 mtr deep below normal ground level with top edge of the plate vertically to a depth not less than 1.5 mtr below ground level connected to connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 including GI pipe 15 mm dia light grade for protection to the extend of 7.5 mtr as earthing lead connecting to equipment with provn charcol and salt complete including PCC chamber with RCC cover watering arrangement with GI pipe 20 mm dia medium grade and MS funnel, including excavation and earth work and returning, filling in including ramming and removal of surplus soil and testing on completion complete. Please Enable Macros to View BoQ information |
