|
| 1 | Surface dressing n exc15 cm deep and getting out any type of soil complete all as specified and directed. |
| 2 | Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation .etc in soft/loose soil complete all as specified and directed. |
| 3 | M&L for plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation, filling & mass concrete, sub base complete all as specified and directed. |
| 4 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick with soft/loose soil etc complete all as specified and directed. |
| 5 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed. |
| 6 | M&L for providing reinforced cement concrete (M-25) Design Mix using 20 mm graded stone aggregates as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 7 | M&L for providing reinforced cement concrete (M-25) Design Mix using 20 mm graded stone aggregates as in Columns, pillars, piers, posts and struts complete all as specified and directed. |
| 8 | M&L for providing reinforced cement concrete (M-25) Design Mix using 20 mm graded stone aggregates as in Slabs supported on walls, beams and columns in floors, roofs complete all as specified and directed. |
| 9 | M&L for providing reinforced cement concrete (M-25) Design Mix using 20 mm graded stone aggregates as in Roof beams, cantilevers, bressummers, lintel over 1.5 span complete all as specified and directed. |
| 10 | M&L for providing reinforced cement concrete (M-25) Design Mix using 20 mm graded stone aggregates as in Chajjas complete all as specified and directed. |
| 11 | M&L formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter (rough finished surface) complete all as specified and directed. |
| 12 | M&L formwork to sides of pillars, posts, struts, piers, columns and stanchions (square/rectangular/polygonal) rough finished surface complete all as specified and directed. |
| 13 | M&L formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200 mm thick rough finished in flat surface complete all as specified and directed. |
| 14 | M&L formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors in rough finished flat surfaces and etc complete all as specified and directed. |
| 15 | M&L formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizon tal or sloping and similar work exc 10cm but n exc 20cm wide (rough finished surface) complete all as specified and directed. |
| 16 | M&L for TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips etc complete all as specified and directed. |
| 17 | All as per item No.16 above, but 6 mm dia to 8 mm dia complete all as specified and directed. |
| 18 | All as per item No. 16 here-in-before, but 5 mm dia & over upto & including 10 mm dia in stirrups, spacers and binders, complete all as specified and directed. |
| 19 | M&L for brickwork with fly ash old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed. |
| 20 | M&L for Brickwork with fly ash old size bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed. |
| 21 | M&L for rendering 15 mm thick in cement mortar (1:6) on brick work or concrete surfaces finished even and fair (without using extra cement) complete all as specified and directed. |
| 22 | M&L for 15 mm thick plastering in cement mortar (1:4) on brick or concrete surfaces including rendering on fins, fascias, chajja, parapets etc and finishing the surfaces even and fair (without using extra cement), top layer shall be with WPC as per manufacturer's instruction and complete all as specified and directed. Note: WPC shall be measured and paid separately. |
| 23 | M&L rendering 10mm thick in cement mortar (1:3) as in ceilings finished even and fair (without using extra cement) complete all as specified and directed. |
| 24 | Supply only integral water proofing compound ISI Marked complete all as specified and directed. |
| 25 | M&L for preparation of new internal plaster surfaces applying two coats of oil bound distemper over a coat of alkhali resistant primer over a coat of wall care putty 1.5 mm thick complete all as specified and directed. Please Enable Macros to View BoQ information |
| 26 | M&L for preparation of new internal plaster surfaces applying two coats of oil bound distemper over a coat of alkhali resistant primer over a coat of wall care putty 1.5 mm thick complete all as specified and directed. Please Enable Macros to View BoQ information |
