Tender For Renovation Of Existing Facilities In Irradiation Facility Centre And Vegetable Processing Facility At Plot No. 3, Sector-19F, Apmc Market, Vashi, Navi Mumbai, Thane-Maharashtra

TDR : 55246446

Tender Notice
BOQ

13 Days Left

Thane , Maharashtra

Tender Brief : Tender For Renovation Of Existing Facilities In Irradiation Facility Centre And Vegetable Processing Facility At Plot No. 3, Sector-19F, Apmc Market, Vashi, Navi Mumbai

Document Fees
₹ 3540 /-

EMD
₹ 1317109.0 /-

Tender Value
₹ 13.17 Crore /-

Submission Date
11-05-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Dismantling brick masonry in lime or cement mortar and stacking the materils as directed with all leads, lifts etc.
2	Ground Floor
3	First Floor
4	Removing lime or lean cement concrete including stacking the spoils as directed with all leads, lifts etc, complete.
5	Ground Floor
6	First Floor
7	Second Floor
8	Removing rich mix cement concrete including stacking the spoils as directed with all leads, lifts etc, complete.
9	Ground Floor
10	First Floor
11	Second Floor
12	Removing brick bat coba including stacking the spoils as directed with all leads, lifts etc, complete.
13	Ground Floor
14	First Floor
15	Second Floor
16	Removing doors and windows with frames and stacking the materials as directedwith all leads, lifts etc. complete.
17	Ground Floor
18	First Floor
19	Second Floor
20	Removing ventilators and small windows with frame and stacking the materials with all leads, lifts etc. complete.
21	Ground Floor
22	First Floor
23	Second Floor
24	Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete
25	Ground Floor
26	First Floor
27	Second Floor
28	Dismantling the R.C.C. Work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed etc. complete.
29	Ground Floor
30	First Floor
31	Second Floor
32	Removing urinal pans or wash hand basins with frame including disconnecting the sanitary and water supply connections, removing the same carefully and stacking the serviceable materials as and where directed including throwing the unserviceable materials outside etc complete
33	Ground Floor
34	First Floor
35	Second Floor
36	Removing W.C. pans including disconnecting the sanitary and water supply connections, removing and breaking flooring and bed con-crete around pan removing the same carefully and stacking the serviceable materials as adn where directed including throwing the unserviceable materiasls out side etc. carefully and throwingout the refusal outside etc. complete.
37	Ground Floor
38	First Floor
39	Second Floor
40	Providing and fixing frame work of anodised aluminium sections for suspended false ceiling consisting of aluminium T 50 mm x 40 mm weighing 0.39 Kilogram/m. at 60 cms c/c and fixed with ( 15 x 15 mm) flanges weighing 0.119 Kilogram/m suspended on 6 mm dia. mild steel rod weighing 0.22 Kilogram/m fixed on wall and beams including rounding of the edges with aluminium T of 50 mm x 40 mm weighing 0.39 Kilogram/m etc.including all labour etc. complete.
41	Ground Floor
42	Second Floor
43	Providing and fixing false ceiling of 10 to 12 mm thick decorative boards of fibrous plaster of paris including scaffolding if necessary all architectural work like mouldings, cornices, coves, domes, cups as per detailed drawings and three coats of spray painting to boards etc. complete. (excluding frame work, runners and mild steelsuspenders).
44	Ground Floor
45	Second Floor
46	Providing and fixing in position Gypsum board false ceiling with 12.5 mm thick Gypsum boards, screwed/fixed to the under structure of suspended G.I. Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 x 50 mm maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should betaped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels. Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts etc. all complete.
47	Ground Floor
48	Second Floor
49	Providing and fixing 15 mm thick eco-friendly densified edge calcium silicate false ceiling of approved texture of size 595mm x 595mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections (galvanising at @12 gm/sq.m including both sides) consisting of main T runner suitably spaced at joints to get required length and size 24X38mm. made from 0.33mm thick(minimum ) sheet, spaced 1200mm center to center and cross T of size 24X28mm made of 0.33mm thick(minimum ) sheet to be interlocked at the middle of the 1200x600 mm panel to form the grid of size 600x600mm resting on periphery walls/partitions on a perimeter wall angle precoated steel of size 24x24x3000 made of 0.4 mm thick (minimum) sheet with the help of all plugs at 450mm and laying 15 mm thick densified edges calcium silicate ceiling tiles of approved texture (spintone/cosmos/hexa) in the grid, including light fittings , fixtures , smoke detectors etc., wherever required. Main T runners suspended from ceiling with using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling using 12.5mm dia. And 50mm long dash fasteners, 4mm G.I. adjustable rods with galvanized steel levels clips of size 85x30x0.8mm, spaced at 1200mm center to center along main T bottom exposed with 24mm of all T-sections shall be prepainted with polyester baked paint, for all heights, as per specifications, drawings etc. complete.(currently this item should be used only for VIP cabins)
50	Ground Floor
51	First Floor
52	Second Floor
53	Providing and Fixing Mineral Fibre Acoustical Suspended Ceiling System with Dune (Bevelled Tegular) Edge Tiles of size 15mm Exposed Grid. The tiles should have Humidity Resistance (RH) of 99%,NRC 0.5, Light Reflectance 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 16mm , with Recycled content of 35 %. The tile shall be laid on precoated G.I.channel height 32 with 15 mm wide T - section flanges colour white having rotary stitching and XL2 CLIP on all T sections i.e. the Main Runner, 1200 mm and 600 mm Cross Tees with a web height of 32mm and a load carrying capacity of 7.57 Kilograms/M2 and pull out stength of minimum 100 Kilograms.. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system. The Tile and Grid system used together should carry a 10 year warranty.approved as per GRIHA and BS 476 etc. complete.
54	Second Floor
55	Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
56	First Floor
57	Second Floor
58	Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
59	First Floor
60	Second Floor
61	Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
62	First Floor
63	Second Floor
64	Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints,watering and scaffolding etc. Complete
65	Ground Floor
66	First Floor
67	Second Floor
68	Third Floor
69	Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:3 without neeru finish to concrete surface in all positions including scaffolding and curingetc. complete.
70	Ground Floor
71	First Floor
72	Second Floor
73	Third Floor
74	Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffoldingand curing etc. complete.
75	Ground Floor
76	First Floor
77	Second Floor
78	Providing internal cement plaster 20mm thick in Single coats in cement mortar 1:4without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc.complete.
79	Ground Floor
80	First Floor
81	Second Floor
82	Providing and applying impression 24 carrat Luxury paint of approved make & approved brand Emulsion paint to interior walls and ceilings of approved quality, colour and shade to new surface in two coats, including sub surface prparation by Acrylic putty and Acrylic primer coats including scaffolding, preparing the surface. etc. complete(Low VOC).
83	Ground Floor
84	First Floor
85	Second Floor
86	Providing and applying antipeel paint of approved make & approved brand exterior Emulsion paint of approved quality, colour and shade to old and new surface in two coats, including exterior acrylic primer coat, scaffolding, preparing the surface etc. complete (HeatReflective Paint).
87	Ground Floor
88	First Floor
89	Second Floor
90	Providing and laying vitrified matt fininsh tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc.complete.
91	Ground Floor
92	First Floor
93	Second Floor
94	Providing and laying vitrified matt finish tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc.complete.
95	Ground Floor
96	First Floor
97	Second Floor
98	Providing and laying in position flooring of Quartz stone /italian marble of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing inC.M. 1:3 curing and cleaning etc. complete.
99	Ground Floor
100	First Floor
101	Second Floor
102	Providing and laying in position Skirting of Quartz stone/ italian marble of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing inC.M. 1:3 curing and cleaning etc. complete.
103	Ground Floor
104	First Floor
105	Second Floor
106	Providing and fixing in position (as per 1868 / 1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 Kilogram/One Running Metre. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 Kilogram/One Running Metre.. Top and side track section 92 x31.75 x 1.30 mm at weight 0.933 Kilogram/Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/One Running Metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/Running metre. and handle and top section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising with box
107	Ground Floor
108	First Floor
109	Second Floor
110	Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete.
111	Ground Floor
112	First Floor
113	Second Floor
114	Providing and applying water proofing treatment using acrylic polymer modified cement based water proofing coating with fibre glass mesh mixing at the rate of powder to liquid (2:1) by weight covering 9 to 10 Square Metre /Kilogram with two coat using approved chemicals for masonry and concrete surface by brush covering 7 years guarantee on Stamp Papers etc. complete.
115	Ground Floor
116	First Floor
117	Second Floor
118	Providing Water proofing treatment to old terraces by removing existing treatment, sealing of cracks by non shrink crack fill compound applying first coat of polymer modified semi-viscous paste prepared by mixing polymer of approved make and Cement in 1 : 2 proportion (1 litre polymer : 2 Kg Cement ) to a neatly cleaned and dust free concrete surface and upto 300 mm over parapet wall prepared by removing loose and deposited material with brush and water, followed by a coat of flexible cementious coating eg. MYK-Aqufine U.M., EL Monobond or equivalent as per manufacturer specification after laying glass fibre mesh of 10 x 10 specification of approved make over tacky surface of first coat of polymer followed by second coat in transverse direction, sprinkling coarse sand over it, followed by protective mechanical cover of 20 mm water proof plaster after sufficient curing 40 to 75 mm IPS 1:2:3 proportion using coarse aggregate of 10 MSA and water proofing compound and polypropylene fibres @ 125 gm per bag of cement within it conforming to IS in pannels making groove 3 to 4 mm wide & 10 mm deep & 3m/4m or as per site condition & filling the joints with polt sulphide sealant after curing, including providing holler with drip moulds at the junction and finishing the concrete surface with neat cement slurry including curing as directed and ponding the surface as directed etc. complete; covering 10 years guarantee against leakproofness on Court Fee Stamp Paper of Rs. 100/-
119	First Floor
120	Second Floor
121	Third Floor
122	Providng Grouting by specially prepared grout of approved make chemical with cement in proportion 1:3.5 (1 part chemical & 3.5 part cement by weight) along wih 50 ml super plasticizer non cracking antiwash high strength polymer cement grout P C grout available in bags or equivalent with proper water for injectable consistency and applying it in the body of structure like slab, beam, column, pillars, deckslab, retaining wall, basement, underground and elevated water storage reservoir concrete and brick wall, crack portion of structure etc. by injectng method, to achieve its original strength including drilling of suitable diameter drills holes at 2 to 4 Nos. per sqm. using caps and nozzle grouting machinery necessary, scaffolding, finishing and covering gurantee of 10 years on court stamp paper of Rs. 100/- and necessary testing etc. complete. (Prior permission ofS.E. in writing is necessary before inclusion of this item in estimate)
123	Ground Floor
124	First Floor
125	Second Floor
126	Third Floor
127	Providing and applying required coats of a water based Evercrete Deep Penetrating Sealer (DPS) on cement concrete surface like roads, beams, and columns, plastered walls, basements, roofs, potable water tanks etc to react with cement and to penetrate concrete structure thereby making it resistant to chemicals / chlorides water to make it dust proof and to act as a water resistant at the same time which Strengthens the treated surface and reduce the curing period etc complete. - Note -- for item One Number 7 to 4 prior approval of Superintending Engineer will be necessary
128	Ground Floor
129	First Floor
130	Second Floor
131	Providing & Fixing in position, Acoustical Panelling made from Gypsum plain 12mm panels on, 50 x 50 mm Sal-wood frame of 600 x 600 c to c having wooden supports from wall of required length, in front of 1000 Gsm synthetic wool 50 mm thick with chicken mesh on wall side, including cost of required Cut-Outs, decorative mouldings / finishing- items / paint & Scaffolding, as per Architectural & Acoustical Design & Instructions & Complete in all aspects. including all materials labour,finishing etc complete
132	Ground Floor
133	Second Floor
134	Tea Table 900mm X 750mm X 450mm for m.s. ante chamberProviding And Fixing Of Tea Table 900mm X 750mm X 450mm With 12mm Thick Colour Eitched Tempered Glass With Bevelled Drawing Made Out Of 18mm Thick Waterproofing Ply. The Outer Laces To Be Finished With High Quality 4 Mm Thik Veneer Or 1 Mm Thik Mica Etc.
135	Ground Floor
136	Sofa Set 3+1+1Providing & fixing Sofa Set 3+1+1 Brown and Cream leather DIMENSION Length:182.5 (cms) Breadth (cms): 100 (cms)Height (cms): 100 (cms) Weight (Kilograms): 66 (Kilogram) Seating Capacity: Five Seat
137	Ground Floor
138	Providing & Fixing Curviliner Workstation @ 1500/1500Lx600/600Dx750HT Providing & Fixing Curviliner Workstation @ 1500/1500Lx600/600Dx750HT,Curvilinear Table Top @ 1500/1500Lx600/600D :- TOP to be made of 25 mm thick Prelaminated particle board with PVC edge band, GABLE END to be made of 25 mm thick Prelaminated particle board with PVC edge band, KEYBOARD TRAY ( WITHOUT MOUSE TRAY ) :- Metal Powder Coated - Black Color, CPU TROLLEY :- Metal Powder Coated - Black Color, along with 3 DRAWER PEDESTAL UNIT having overall size 392L x 450D x 680Ht. mm. with central lock and key. 3 Drawers and body are complete metal with powder coat finish, facia in 18 mm prelaminated particle board,
139	Ground Floor
140	Public Seating Chair. - 3 SeaterProviding and Fixing 3 seater Public seating chair made of complete metal with Legs in Crome finish and seates in silver powder coating finish.
141	Ground Floor
142	Solid Core Flush door Single leafProviding and fixing factory made solid core flush door in single leaf 35 mm thick, decorative types, of exterior grade, as per detailed drawings, conforming to I.S.:2202 - 1962 (Revised) with approved face veneers on both faces with/without glazing and venetians in the positions shown on the drawings or as directed, all necessary beads, moulding and lipping, holdfasts, mat finish stainless steel fixtures fastenings , finishing with french-polish/ waxing complete. (without door frame).(Sample to be got approved from Ex.Engineer before use) Commercial Hard Wood shutter
143	Ground Floor
144	First Floor
145	Second Floor
146	Supply and installation of cubicles of width and depth as per Athena Lite- SS Series Cubicles- Std Sizes (W x D x H): 900 mm x 1550 mm x 2105 mm, (Height is including 100 mm gap from bottom, Door Width- 600 mm specifications/ site drawings). Cubicle height to be 2105 mm. Made from solid grade compact high pressure laminate as per IS:2046 and EN-438 manufactured under high specific pressure > 5 MPa and temperature>120°C, All doors will be of single colour and made of 12 mm thick Merino HPL compact panel. The doors will have chamfered edges. Each door will be supported by 3 stainless steel made hinges affixed to the pilasters. Size of panels to be as per drawing. HARDWARE & ACCESSORIES are H shaped (Top) head frame structure made of extruded Aluminium grade 6063 T5-50 micron epoxy powder coated for surface protection, Size to be 125x70x5T. Corner joinery section, Size to be 40x16.5x1.8T. U- Channel Wall joinery section,Size to be 22x16x1.6T. Door stopper section, Size to be 21x12.5x1.6T. Spring loaded Butt Hinges made from Stainless steel grade 304. Surface finish to be matt type. Covers to be lacor coated.etc complete.
147	Ground Floor
148	First Floor
149	Second Floor
150	Bed Side Table @ 400LX 400DX 415HProviding and Fixing Bed Side Table of size 400LX 400DX 415H The bed side unit is made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The bed side table has one drawer and one shelf. The shelf is made of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding
151	Ground Floor
152	Providing & Fixing in position, Carpet more than 800+ gsm, made with100% stain proof fibres of approved make along with 5mm underlay as per Architectural & Acoustical Design & Instructions & Complete in all aspects including all materials labour,finishingetc complete
153	Ground Floor
154	Second Floor
155	Providing and fixing 450mm x 550mm size superior type Belgium mirror with 16mm dia. nickel plated towel rod etc. complete.
156	Ground Floor
157	First Floor
158	Second Floor
159	Free Standing Table @ 1500Lx600Dx750HTProviding and fixing Table of Size 1500 x 600 x 750 mm. Top: made from 25 mm Prelaminated Particle board. All edges are covered by 2 mm. Thk. PVC edge bands glued by hot melt glue applied by auto edge banding machine.Legs : C Shape made from CRCA Sheet with Powder Coat finish. Modesty panel : Made from 18mm both side prelaminated particle boards.All edges are covered by 0.8mm PVC edge bands glued by hot melt glue applied by auto edge banding machine.KEYBOARD TRAY ( WITHOUT MOUSE TRAY ) :- Metal Powder Coated - Black Color, CPU TROLLEY :- Metal Powder Coated - Black Color, 3 DRAWER PEDESTAL UNIT having overall size 392L x 450D x 680Ht. mm. with central lock and key. Drawers and body are complete metal with powder coat finish, facia in 18 mm prelaminated particleboard,
160	Ground Floor
161	Providing & Arrangemnt of High Back Chair - TILT MECHANISM WITH MULTILOCKING, HIGH DENSITY CUSHION ON SEAT COMPOSITE LEATHER WITH METALLIC SILVER FINISH BASE AND ARMS WITH P.U.CASTORSGASLIFT FOR HEIGHT ADJUSTMENT.
162	Ground Floor
163	Second Floor
164	Providing & Arrangemnt of MId Back, Normal Syncro Mechanism , Fixed Armrest , Gaslift for Seat height adjustment, Standard 5-prong/Nylon Base with Leather Upholstery
165	Ground Floor
166	Second Floor
167	Providing and fixing Country cut teak wood partly veneered and partly glazed partition with 75 mm x 50 mm frame at 60 cm center and 9 mm thick commercial ply on both sides, decorative veneer of 4 mm thick and Toughned glass 12 mm thick, including French polishing etc.complete
168	Ground Floor
169	Providing & applying of a 4 Component, Single Layer Seamless Solvent Free, Moisture Intensive and Epoxy Flooring 3mm thick system of density more than 1950 Kg/Cu.mtr to have a smooth & even matt finish matching below mentioned performance properties: 1- Mixed density more than 1900kg/Cu.mtr. 2- Abrasion resistance class of AR 0.5 as per BS 8204-2. 3- Cleanable to standards of stainless steel. 4- Zero absorption as per CP. BM 2/67/2. 5 Static Modulus of Elasticity of 3.3 X 10^3 MPa and Toughness of 96.7 X 10^3 Mpa as per modified ASTM C469/C469M. 6- Coefficient of thermal expansion of 3.6 X 10^-5 /oC as per ASTM C531. 7- Shore D hardness of 80. 8- Tensile strength of > 7Mpa. 9- Flexural strength of 20Mpa. 10- Adhesion to concrete of more than 2Mpa or until concrete fails. 11- Slip resistance classification 35 as per EN 13036-4. 12- Fire resistance classification of Bfl-S1 as per EN 13501-1:2002. 13- Surface spread of flame of CLASS 2 as per BS476, Part7. 14- Cure time of 12 Hours for foot traffic and 24 hours for vehicular traffic at 30oC, Applied at a thickness of 3mm over a 1mm scartch coat of the same material by an authorised applicator of the manufacturer in accordance to the application guidline as provided by the manufacturer.
170	Ground Floor
171	First Floor
172	Second Floor
173	Providing and fixing 12 mm thick Glass Door with Sensor of Door weight 2 x 125 Kg ,Door width (Max Open), AC Power:- SMPS 140-280 AC/50 Hz/1P/100 W, Open Close SPEED :-250-500 MM/S, Opening Time:2-10 Sec (Adjustable) , Motor Type :- Heavy Duty 24 V DC Brushless Motor ,Program Controller:- Micro Controller Based to Set Door Parameters,Motion Sensor of Microwave 24Ghz, 6 Key Switch,Photo Safety Sensor,Door Hanger,Cover all th frame work in heavy Duty SS 304 & Aluminium Features :- Door Rail Line Technology,Noise Less Operation including all accessories required for fixing
174	Ground Floor
175	Providing and fixing Plain PVC False Ceiling 6mm on frame work of anodised aluminium sections for suspended false ceiling consisting of aluminium T 50 mm x 40 mm weighing 0.39 Kilogram/m. at 60 cms c/c and fixed with ( 15 x 15 mm) flanges weighing 0.119 Kilogram/m suspended on 6 mm dia. mild steel rod weighing 0.22 Kilogram/m fixed on wall and beams including rounding of the edges with aluminium T of 50 mm x 40 mm weighing 0.39 Kilogram/m etc.including all labour etc. complete.
176	Ground Floor
177	First Floor
178	Second Floor
179	Providing and fixing Opal Prime Sensor Faucet for Wash Basin (Battery Operated) SNR-15019PM including necessary socket union nut complete.
180	Ground Floor
181	Modular Conference System@ 16750Lx700Dx750HT/16750 x 3000 x 750 HT with Table Top made of 19+19 mm thick green defender ply or equivalent conforming to IS:5509 both side fire retardent 1.0 mm thick laminated Wire management - conecaled wire management to take care both horizontally & vertically. For open configurations, wire channel shall be mounted on the inner side of modesty panel for horizontal wire carrying. Vertical wire management shall be through flexible wire manager. 19 mm thick green defender ply or equivalent conforming to IS:5509 both side fire retardent 1.0 mm thick laminated finish . Wire management is done through Grommets. All Exposed edges have 2mm PVC edge banding from Rehau. These edge bands are manufactured with virgin polymers and positive pretensioned to achieve perfect joint. Edge bands are resistance to regular cleaning agents against brittleness. Edge band Light fastness complies to EN ISO 4892-2 & Fire behaviour of edge bands complies to DIN 4102 worksheet 4.Water vapour resistance of edge bands complies to DIN EN 438-2 item 14 & Tensile strength of edge bands complies to DIN EN ISO 527-2. Shore hardness of edge bands complies to DIN 53 505. Aproved Make : NLF Solutions, Herman Miller,Steel case.
182	Ground Floor
183	Providing and fixing Pvc shett Fluated sheet 8mm Thick including all accessories required for fixing this sheet .
184	Ground Floor
185	Second Floor
186	Providing and fixing in position reception table 1200X700X750/1000 MM made up of 19 mm thick green defender ply or equivalent conforming to IS:5509 both side fire retardent 1.0 mm thick laminated side panels, front panel, vertical panel, 2 drawer, 2 shutter, bottom panel, shelf in with pvc lipping. 19 mm thick green defender ply or equivalent conforming to IS:5509 both side fire retardent 1.0 mm thick laminated at the bottom including neccessary channel, hinges, lock and handle etc. complete. as per aproved shade colour. 8mm Frosted glass on top. Dual shade lamination in Modesty & Gable ends. Table top, modesty panel, gable end, All Exposed edges have 2mm PVC edge banding from Rehau. These edge bands are manufactured with virgin polymers and positive pretensioned to achieve perfect joint. Edge bands are resistance to regular cleaning agents against brittleness. Edge band Light fastness complies to EN ISO 4892-2 & Fire behaviour of edge bands complies to DIN 4102 worksheet 4.Water vapour resistance of edge bands complies to DIN EN 438-2 item 14 & Tensile strength of edge bands complies to DIN EN ISO 527-2. Shore hardness of edge bands complies to DIN 53 505.Aproved Make : NLF Solutions, Herman Miller,Steel case.
187	Ground Floor
188	Providing and fixing in position reception table 1500X700X750/1000 MM made up of 19 mm thick green defender ply or equivalent conforming to IS:5509 both side fire retardent 1.0 mm thick laminated side panels, front panel, vertical panel, 2 drawer, 2 shutter, bottom panel, shelf in with pvc lipping. 19 mm thick green defender ply or equivalent conforming to IS:5509 both side fire retardent 1.0 mm thick laminated at the bottom including neccessary channel, hinges, lock and handle etc. complete. as per aproved shade colour. 8mm Frosted glass on top. Dual shade lamination in Modesty & Gable ends. Table top, modesty panel, gable end, All Exposed edges have 2mm PVC edge banding from Rehau. These edge bands are manufactured with virgin polymers and positive pretensioned to achieve perfect joint. Edge bands are resistance to regular cleaning agents against brittleness. Edge band Light fastness complies to EN ISO 4892-2 & Fire behaviour of edge bands complies to DIN 4102 worksheet 4.Water vapour resistance of edge bands complies to DIN EN 438-2 item 14 & Tensile strength of edge bands complies to DIN EN ISO 527-2. Shore hardness of edge bands complies to DIN 53 505.Aproved Make : NLF Solutions, Herman Miller,Steel case. )
189	Ground Floor
190	Providing and fixing in position Shelf with Table 1500X700X750 MM made up of 19 mm thick green defender ply or equivalent conforming to IS:5509 both side fire retardent 1.0 mm thick laminated side panels, front panel, vertical panel, 2 drawer, 2 shutter, bottom panel, shelf in with pvc lipping. 19 mm thick green defender ply or equivalent conforming to IS:5509 both side fire retardent 1.0 mm thick laminated at the bottom including neccessary channel, hinges, lock and handle etc. complete. as per aproved shade colour. 8mm Frosted glass on top. Dual shade lamination in Modesty & Gable ends. Table top, modesty panel, gable end, All Exposed edges have 2mm PVC edge banding from Rehau. These edge bands are manufactured with virgin polymers and positive pretensioned to achieve perfect joint. Edge bands are resistance to regular cleaning agents against brittleness. Edge band Light fastness complies to EN ISO 4892-2 & Fire behaviour of edge bands complies to DIN 4102 worksheet 4.Water vapour resistance of edge bands complies to DIN EN 438-2 item 14 & Tensile strength of edge bands complies to DIN EN ISO 527-2. Shore hardness of edge bands complies to DIN 53 505.Aproved Make : NLF Solutions, Herman Miller,Steel case.
191	Ground Floor
192	Providing and fixing in position Shelf with Table 2000X2400x750 MM made up of 19 mm thick green defender ply or equivalent conforming to IS:5509 both side fire retardent 1.0 mm thick laminated side panels, front panel, vertical panel, 2 drawer, 2 shutter, bottom panel, shelf in with pvc lipping. 19 mm thick green defender ply or equivalent conforming to IS:5509 both side fire retardent 1.0 mm thick laminated at the bottom including neccessary channel, hinges, lock and handle etc. complete. as per aproved shade colour. 8mm Frosted glass on top. Dual shade lamination in Modesty & Gable ends. Table top, modesty panel, gable end, All Exposed edges have 2mm PVC edge banding from Rehau. These edge bands are manufactured with virgin polymers and positive pretensioned to achieve perfect joint. Edge bands are resistance to regular cleaning agents against brittleness. Edge band Light fastness complies to EN ISO 4892-2 & Fire behaviour of edge bands complies to DIN 4102 worksheet 4.Water vapour resistance of edge bands complies to DIN EN 438-2 item 14 & Tensile strength of edge bands complies to DIN EN ISO 527-2. Shore hardness of edge bands complies to DIN 53 505.Aproved Make : NLF Solutions, Herman Miller,Steel case.
193	Ground Floor
194	Medium Height Partition @ 1800/1200HT TILE BASED PARTITION SYSTEMTile based Aluminum partition system of 1800/1200mm ht. made of 60mm thick aluminum frames having two separate race ways for laying electrical & computer wiring. The wire management shall be through to the race way to be fitted at bottom of partition other immediately below of work top with hook on type raceway cover for easy access of wires. Frames to be joined by aluminum connectors with M6 x 16 pan-head machine screw and washer with aluminum post cover. Post cover snap on fashion to be connected on aluminum connector visible aluminium to be in anodized / powdercoated finish. The top exposed sides of the frame and posts should be covered with horizontal/ Vertical trim and caps made of Aluminum in anodized / powdercoated finish in order to enhance its look.Upper tiles on the partition to be in Soft Board or Marker or prelaminated partical board tile of 9mm. thk., prelaminated partical board lower tiles in laminate finish 9mm. thk. on both the sides .Size :- 1200/1800mm (H)
195	Ground Floor
196	First Floor
197	Providing and fixing 15 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete.
198	Ground Floor
199	First Floor
200	Second Floor
201	Providing and fixing 25 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete.
202	Ground Floor
203	First Floor
204	Second Floor
205	Providing and fixing screw down for 32 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete.
206	Ground Floor
207	First Floor
208	Second Floor
209	Providing and fixing coloured glazed earthenware full stall type Urinal with P.V.C. flushing cistern of 5 liters capacity with fitting, inlet pipes and stop tap brackets for fixing the cistern 32mm dia. P.V.C. flush pipe with fittings and flushing arrangement including lead soil pipe, lead trap soil pipe connection up to the outside face of the wall.
210	Ground Floor
211	First Floor
212	Second Floor
213	Providing and fixing chromium plated towel rod 16 mm dia and 75 cm. in length including all accessories complete.
214	Ground Floor
215	First Floor
216	Second Floor
217	Providing and fixing 40 mm. dia Ball cock medium type with PVC float including sockets and necessary fittings and tested as per municipal requirements etc. complete.
218	Ground Floor
219	First Floor
220	Second Floor
221	Providing and fixing 15 mm. dia Ball cock medium type with PVC float including sockets and necessary fittings and tested as per municipal requirement etc. complete.
222	Ground Floor
223	First Floor
224	Second Floor
225	Providing and fixing 75 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent,clamps etc. complete
226	Ground Floor
227	First Floor
228	Second Floor
229	Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe andwith necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete.
230	Ground Floor
231	First Floor
232	Second Floor
233	Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directedetc. complete.
234	Ground Floor
235	First Floor
236	Second Floor
237	Providing and fixing on walls/ceiling/floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directedetc. complete.
238	Ground Floor
239	First Floor
240	Second Floor
241	Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
242	Ground Floor
243	First Floor
244	Second Floor
245	Providing and fixing on walls/ ceiling/ floor 32 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directedetc. complete.
246	Ground Floor
247	First Floor
248	Second Floor
249	Providing and fixing on walls/ ceiling/ floor 50 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete.
250	Ground Floor
251	First Floor
252	Second Floor
253	Providing and fixing 10 cm PVC nahani trap with grating etc. complete.
254	Ground Floor
255	First Floor
256	Second Floor
257	Providing and fixing C.P. wall mixer with provision for overhead shower with 115mm long bend pipe and wall flange of approved make including necessary sockets/union nut etc.complete.
258	Ground Floor
259	First Floor
260	Second Floor
261	Providing and fixing European type wall-hung white water closet of approved make with push valve concealed type with cover plate 32mm size of approved make including soil pipe, vent pipe up to outside face of wall ,100mm dia. G.I. plug bend inlet pipe all fittings, cuttingand making good walls, floors etc. complete.
262	Ground Floor
263	First Floor
264	Second Floor
265	Providing and fixing C.P.Two way BIB cock of approved make continental including necessary sockets/union nut etc. complete.
266	Ground Floor
267	First Floor
268	Second Floor
269	Providing and fixing P.V.C. Rain water pipes of 110mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and One Number,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete.
270	Ground Floor
271	First Floor
272	Second Floor
273	Providing and fixing oval type under counter wash hand basin of 16 inch x 22 inch size and of special colour shade having telephonic black / coloured granite of 180 mm thick stone black kadappa framework including chromium plated coupling bottle - Trap using CERA company or equivalent oval typa wash basin model no 3448 as per detailed drawing or as directed by engg incharge etc complete. (Counter size 1.20 mx 0.60 m )
274	Ground Floor
275	First Floor
276	Second Floor
277	Providing and fixing in position UPVC ultra violet stabilized 110 mm outer diameter cowl dome confirming to I.S.-4985 including making joints with solvent cement etc.complete
278	Ground Floor
279	Providing and erecting Y type barbed wire fencing with seven rows of wire with 2.45 mm dia G.I. pipe ( Rezan/ concentiDeleted ire 0.75 mm dia ) with hot dip and G.I. coated hooks as per drawing supported on M.S. angle 50 x 50 x 6 mm at 2.5 mtr. c/c including fixing and fastening with wire, painting M.S. angles with one coat of red leadprimer and two coat of oil paint etc. complete.
280	Ground Floor
281	Providing and fixing H.D.P container one piece moulded water tank made out of low density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacityabove 1000 to 20,000 litres
282	Second Floor
283	C.P.Soap dish hooker jaquar make continental (Cat. No. AKB 35731 )
284	Ground Floor
285	C.P.soap dish (polyurethane) jaquar make continental (Cat. No. AQN 7733 )
286	Ground Floor
287	C.P.Toilet paper holder jaquar make continental (Cat. No. AQ 7751 )
288	Ground Floor
289	C.P.Toilet rack 24\\"with lower hanger jaquar make continental (Cat. No. ACN 1181N )
290	Ground Floor
291	Providing and fixing C.P. BIB cock with wall flange of approved make including necessary sockets/ union nut etc. complete.
292	Ground Floor
293	Supply, fixing and installation of 4mm thick Aluminium Composite Panel (ACP) of approved colour for external cladding in combination of solid and metallic colours, including all necessary Framework, support and complete weather sealing as per architectural drawing. The Aluminium Composite Panel (ACP) should be made out of thermoplastic core of low-density polyethylene LDPE (100% virgin mix), sandwiched between two aluminium sheets of ALLOY GRADE- 5000 series, each not less than 0.50 mm thick, total thickness of aluminium composite panels not to be less than 4 mm, the exposed surface thereof shall have Stove lacquered finishing coat not less than (26 + - 2) micron (containing minimum 70% kynar 500 based PVDF) of colour and shade as per architectural design. The inside surface (facing the building exterior surface)shall have polyster based powder coating not less than 25 Micron with protective peel-off foil on the exterior face (peel off film will in no case leave any adhesive mark over the composite panel surface after it is peeled off). The supporting framework shall be made out of 50 mm X25mm X 3mm thick Aluminium section to be spaced horizontally and vertically for fixing of panel of size 900 mm X 1200 mm and fixed to the building structure as per design through 50mm X50mm X5 mm MS angle clamps prefixed to masonry or slab, columns with Hilti make anchor fastener screws. The fixing of panel to be done with the help of VHB tapes and screws and all the sealing of joints to be done with weather sealent Silicon as directed by Engineer-in-charge. (Prior permission of S.E. is necessary beforeinclusion of this item in estimate)
294	Ground Floor
295	First Floor
296	Second Floor
297	Third Floor
298	Providing, fabricating and erecting at site of work the tubular steel structure (shed) as per standard design and specifications having various spans in between trusses and in multiples of standard length of bays as specified as per standard specifications, inclusive of cost of steel tubular trusses, tubular columns purlins, tie runners, foundation bolts, base plates, nuts and bolts, welding wherever required etc. as per detailed drawing inclusive of one coat of anticorrosive paint and two coats of oil painting of approved quality and shade etc. complete. Spec. One Number : As directed by Engineer-in-charge.
299	Ground Floor
300	First Floor
301	Second Floor
302	Third Floor
303	Providing and fixing of colour coated Zinc aluminium ( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminiumm 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyster paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950- 1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center- to-center. The end rib shall be designed for anti-capacity groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/ One Square Metre) 900 mm girth (Surface Width).
304	Ground Floor
305	First Floor
306	Second Floor
307	Third Floor
308	Providing & fixing of Casement fixed window of approved make with DGU. The extruded aluminium sections of Alloy 6063 tolerances confirming to DIN standard fromapproved raw material V2 / V4 as directed by Engineer in charge.
309	Ground Floor
310	First Floor
311	Second Floor
312	Third Floor
313	Dry wall cladding with clay tile; Designing, supplying and fixing of Clay tile of Wienerberger (Red Series or Grey Series) or Equivalent with suitable size and thickness not less than 20 mm as per manufacturer with approved colour and pattern with composition of finest powdered clay and colour mixtures. The clay tile shall be fixed on the suitable farming system by using continuous aluminium profiled section as per manufacturer with suitable size and spacing to withstand the structural design criteria specifled in the technical specification by using necessary HDG brackets, SS316 grade anchor bolts etc as per manufacturer specification. Cladding joints should be with open groove system. with prior approval of concerned Superitending Engineer.
314	Ground Floor
315	First Floor
316	Second Floor
317	Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment orstacking as directed.
318	Ground Floor
319	Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete.
320	Ground Floor
321	Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushedsand VSI Grade)
322	Ground Floor
323	Providing and fixing heavy duty inter locking concrete RUBBER MOULD GLOSSY PAVING BLOCKS of 60 millimeter thickness of having a strength of 400 Kilogram/sq.m of approved quality and shape on a bed of crushed sand of 25 to 30 millimeter thick including striking joints and cleaning etc. complete. (using 100%crushed sand)
324	Ground Floor
325	Providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc. including welding grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts, etc. of the required size on the top of the floor of the side of waiste slab with suitable arrangement as per approval of engineer in charge (for payment purpose, only the weight of the stainless steel members shall be considered excluding fixing accessories such as nut bolts, fasteners etc.). 50mm dia. pipe, 1.5mm thickness and weight 1.92Kilogram/ r. metre
326	Ground Floor
327	First Floor
328	Providing & fixing of Casement fixed window of approved make with DGU. The extruded aluminium sections of Alloy 6063 tolerances confirming to DIN standard fromapproved raw material V2 / V4 as directed by Engineer in charge.
329	Ground Floor
330	First Floor
331	Second Floor
332	Third Floor
333	Supplying, Drilling/Cleaning hole and injecting chemical. Application to be designed separately for Rebars as Simply Supported, Moment or Splice Connection as per EC2/TR 023 or relevant tested and accepted rebar guidelines. The chemical should have ETA approval for seismic rebar as a minimum qualifying criterion. Drilling hole with double flute type drill bits or hollow drill bits to the required depth by rotary hammer drill, cleaning with brush and jet of clean air, filling resin and hardener using serrated nozzle to eliminate mixing error with standard HDE A22 battery dispenser along with piston plug. The installation and the setting instructions should be strictly followed as per the manufacturer’s recommendations. The adequate diameter and embedment of rebars to be decided as per PROFIS Rebar Software & the report to be submitted to the project manager/ design engineer for approval. Scanning before drilling to be done to avoid hitting existing rebars. Re 500 -8mm dia 160mm depth
334	First Floor
335	Second Floor
336	Third Floor
337	Supplying, Drilling/Cleaning hole and injecting chemical. Application to be designed separately for Rebars as Simply Supported, Moment or Splice Connection as per EC2/TR 023 or relevant tested and accepted rebar guidelines. The chemical should have ETA approval for seismic rebar as a minimum qualifying criterion. Drilling hole with double flute type drill bits or hollow drill bits to the required depth by rotary hammer drill, cleaning with brush and jet of clean air, filling resin and hardener using serrated nozzle to eliminate mixing error with standard HDE A22 battery dispenser along with piston plug. The installation and the setting instructions should be strictly followed as per the manufacturer’s recommendations. The adequate diameter and embedment of rebars to be decided as per PROFIS Rebar Software & the report to be submitted to the project manager/ design engineer for approval. Scanning before drilling to be done to avoid hitting existing rebars. Re 500 -10 mm dia 200mm depth
338	First Floor
339	Second Floor
340	Third Floor
341	Supplying, Drilling/Cleaning hole and injecting chemical. Application to be designed separately for Rebars as Simply Supported, Moment or Splice Connection as per EC2/TR 023 or relevant tested and accepted rebar guidelines. The chemical should have ETA approval for seismic rebar as a minimum qualifying criterion. Drilling hole with double flute type drill bits or hollow drill bits to the required depth by rotary hammer drill, cleaning with brush and jet of clean air, filling resin and hardener using serrated nozzle to eliminate mixing error with standard HDE A22 battery dispenser along with piston plug. The installation and the setting instructions should be strictly followed as per the manufacturer’s recommendations. The adequate diameter and embedment of rebars to be decided as per PROFIS Rebar Software & the report to be submitted to the project manager/ design engineer for approval. Scanning before drilling to be done to avoid hitting existing rebars. Re 500 -12 mm dia 240mm depth
342	First Floor
343	Second Floor
344	Third Floor
345	Supplying, Drilling/Cleaning hole and injecting chemical. Application to be designed separately for Rebars as Simply Supported, Moment or Splice Connection as per EC2/TR 023 or relevant tested and accepted rebar guidelines. The chemical should have ETA approval for seismic rebar as a minimum qualifying criterion. Drilling hole with double flute type drill bits or hollow drill bits to the required depth by rotary hammer drill, cleaning with brush and jet of clean air, filling resin and hardener using serrated nozzle to eliminate mixing error with standard HDE A22 battery dispenser along with piston plug. The installation and the setting instructions should be strictly followed as per the manufacturer’s recommendations. The adequate diameter and embedment of rebars to be decided as per PROFIS Rebar Software & the report to be submitted to the project manager/ design engineer for approval. Scanning before drilling to be done to avoid hitting existing rebars. Re 500 -16 mm dia 320mm depth
346	First Floor
347	Second Floor
348	Third Floor
349	Supplying, Drilling/Cleaning hole and injecting chemical. Application to be designed separately for Rebars as Simply Supported, Moment or Splice Connection as per EC2/TR 023 or relevant tested and accepted rebar guidelines. The chemical should have ETA approval for seismic rebar as a minimum qualifying criterion. Drilling hole with double flute type drill bits or hollow drill bits to the required depth by rotary hammer drill, cleaning with brush and jet of clean air, filling resin and hardener using serrated nozzle to eliminate mixing error with standard HDE A22 battery dispenser along with piston plug. The installation and the setting instructions should be strictly followed as per the manufacturer’s recommendations. The adequate diameter and embedment of rebars to be decided as per PROFIS Rebar Software & the report to be submitted to the project manager/ design engineer for approval. Scanning before drilling to be done to avoid hitting existing rebars. Re 500 -20 mm dia400mm depth
350	First Floor
351	Second Floor
352	Third Floor
353	Supplying, Drilling/Cleaning hole and injecting chemical. Application to be designed separately for Rebars as Simply Supported, Moment or Splice Connection as per EC2/TR 023 or relevant tested and accepted rebar guidelines. The chemical should have ETA approval for seismic rebar as a minimum qualifying criterion. Drilling hole with double flute type drill bits or hollow drill bits to the required depth by rotary hammer drill, cleaning with brush and jet of clean air, filling resin and hardener using serrated nozzle to eliminate mixing error with standard HDE A22 battery dispenser along with piston plug. The installation and the setting instructions should be strictly followed as per the manufacturer’s recommendations. The adequate diameter and embedment of rebars to be decided as per PROFIS Rebar Software & the report to be submitted to the project manager/ design engineer for approval. Scanning before drilling to be done to avoid hitting existing rebars. Re 500 -25mm dia 500mm depth
354	First Floor
355	Second Floor
356	Third Floor
357	Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing inC.M. 1:3 curing and cleaning etc. complete.
358	Ground Floor
359	First Floor
360	Second Floor
361	Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, etc. complete.
362	Ground Floor
363	First Floor
364	Second Floor
365	Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.
366	First Floor
367	Second Floor
368	MECHANICAL EQUIPMENTS
369	Supply scrubber Dryer Battery Operated Ride-on Type Floor Cleaning Machine Type of Drive:- Battery Operated, Machine Working Type:- Ride-on, Scrubbing Width (mm) :- 200-399, Squeegee Width (mm):-300-499, Suction Width (mm) :- 300-499 ,Cleaning productivity (max) (m2/h) :- 4000 - 4499 ,Wheels :- Solid Rubber ,Material of Chassis :- Mild Steel, Chemical Auto Dosing :- Auto ,Additional Accessories:-Squeegee Blades, Brush Motor Capacity (W) :-<=1000 ,Vacuum Motor Capacity (W) :-<=100, Traction Motor :- Capacity (W) 150-349, Battery Chemistry :- Lithium-ion,Number of Batteries required for operation:- 2, Battery backup time under continuous use (in Hours) :-2, Capacity of Battery (AH) :- <=100, Number of Brushes:- 2 ,Disc Brush Speed (rpm) :- 100 - 299 ,Cylindrical Brush Speed (rpm) :- NA, Fresh water tank (ltr):- 51-90, Dirty water tank (ltr):- 56-95 , Warranty (Year):- 1 year
370	Supply boom barrier It should have anti-Crush safety mechanism to suspend the motion of barrier when met with any obstruction, quick opening and closing of barrier with soft landing, speed of barrier should be programmable while installing as per frequency of traffic,Provision to integrate with other peripheral devices like Acces control system, Beam sensors, a) weight with boom:- Upto 80 Kgs weight will change change accourding to the boom length . b) Boom length :- Upto 5 Mtrs, Opening closing time:- Not more than 05 seconds, d)Power:- 230 +_ 10% VAC 50 Hz also operated with 12/24 VDC, E) Drive :- Hydraulic with Dampers, safety devices like beam sensor should be provided with the barrier,barrier should have clamping mechanism in open and closed position,Control system (gear unit,crant drive and control unit ..etc) should behoused inside a stainless steel pole stand casing,it should have distinct visible marking .the barrier body should be treated with 100 micron epoxy zinc painting anti corosion paint.
371	Trolley suspended electric hoist (Telpher) Conformity to Indian Standard IS: 3938 (Latest ):- Yes, Type:- Trolley suspended, Hoisting Motor Power : -5.5 kiloWatt, Working duty :- M5,Method of operation Pendant push button:-Lifting Height 10 meter, Capacity , Ton 15 Beam size As per requirement.Hosting Speed (meter/min) 5 ,Wire rope diameter 20 millimeter, Travelling speed(meter/minute) 15 ,Warranty Period 1 year ,Factor of safety 4.5 ,Ambient Temperature , degree Celsius ( -20 to 50 ), Hoist Brake Electro-Hydraulical ,HOOK Single type \\"C\\" hook confirming to 3815 ,Bearing Ball bearing , Power Supply 230/415 volt , three phase 50 Hz ,Lubrication splash lubrication ,Hook would be Utltrasonically tested as per BHEL standard FF01.NDT.001 , Level 2 NoNo of fall 4 ,Wheel Single flanged with taper treads ,Torque rating 50% grater then the torque transmitted to the brake drum
372	Description of Stores Embedded Linux Based Biometic Attendance System with L1 Fingerprint Scanner ,Availability of STQC Certification Yes for L1 Single Finger-print scanner, Agreed to furnish STQC certification to buyer on demand:- Yes ,Device certification Yes - UIDAI certified registered device, Agreed to furnish UIDAI device certification to buyer on demand :-Yes,BIS CRS Compliance Yes as per IS 13252 (Part 1):2010 BIS CRS ( R ) Number - Must declare R-62002577,Agreed to furnsh BIS CRS compliance certificates to buyer on demand;- Yes, On Site OEM Warranty (in Years) 1 ,Screen Size (in Inches) 4.3 ,Screen Resolution (in Pixels) 320 x 240 ,Processor Speed (in MHz) 800 , RAM (in GB) 1 ,Internal storage (in GB) 4 ,USB Port (in Nos) 1,Micro USB Port (in Nos) 1 ,Battery Back up (in Minutes) 150, Network Connectivity Ethernet Mifare Card Support Yes, GPRS No Internal Speakers Yes, Maximum Acquisition time (in Seconds) 2, Operational Endurance 24 x 7 (Continuous) ,Device Casing Material Polycarbonate, Casing material thickness (mm) 1,Ingress Protection IP 54 ,API/SDK STQC Certification (Linux) Finger Placement ,Fingerprint scanner ergonomically placed to support ease of usage for biometric attendance in standing posture of the user ,Drop Test Compliance for Casing Yes from a height of 1 meters, Availability of Non USB Port for separate charging with AC Adaptor Yes, ROHS Compliance Certificate Yes,Minimum Operating Temperature (in degree C) -20, Maximum Operating Temperature (in degree C) 48 , Minimum Storage Temperature (Degree C) -10 , Maximum Storage Temperature (Degree C) 55 ,Additional requirement NA.
373	Description of Stores Embedded Linux Based Biometic Attendance System with L1 Fingerprint Scanner ,Availability of STQC Certification Yes for L1 Single Finger-print scanner, Agreed to furnish STQC certification to buyer on demand:- Yes ,Device certification Yes - UIDAI certified registered device, Agreed to furnish UIDAI device certification to buyer on demand :-Yes,BIS CRS Compliance Yes as per IS 13252 (Part 1):2010 BIS CRS ( R ) Number - Must declare R-62002577,Agreed to furnsh BIS CRS compliance certificates to buyer on demand;- Yes, On Site OEM Warranty (in Years) 1 ,Screen Size (in Inches) 4.3 ,Screen Resolution (in Pixels) 320 x 240 ,Processor Speed (in MHz) 800 , RAM (in GB) 1 ,Internal storage (in GB) 4 ,USB Port (in Nos) 1,Micro USB Port (in Nos) 1 ,Battery Back up (in Minutes) 150, Network Connectivity Ethernet Mifare Card Support Yes, GPRS No Internal Speakers Yes, Maximum Acquisition time (in Seconds) 2, Operational Endurance 24 x 7 (Continuous) ,Device Casing Material Polycarbonate, Casing material thickness (mm) 1,Ingress Protection IP 54 ,API/SDK STQC Certification (Linux) Finger Placement ,Fingerprint scanner ergonomically placed to support ease of usage for biometric attendance in standing posture of the user ,Drop Test Compliance for Casing Yes from a height of 1 meters, Availability of Non USB Port for separate charging with AC Adaptor Yes, ROHS Compliance Certificate Yes,Minimum Operating Temperature (in degree C) -20, Maximum Operating Temperature (in degree C) 48 , Minimum Storage Temperature (Degree C) -10 , Maximum Storage Temperature (Degree C) 55 ,Additional requirement NA.
374	CASTOR TABLE OVERALL SIZE: 1000 X 610 X 550 mm TOP HEIGHT frame with ISMC 75, MOC:MS Castor wheel: Dia 42 mm. total height 80 MM wheel Assembly horizontal rotation 360° No. of wheels: at least 10 Nos. Bearing make: FAG/ SKF Pusher cylinder: bore 63mm, Stroke: 990 mm with adjustable end cushioning and metallic piston: (SMC / FESTO) Pusher LM guide rod dia 25mm x 1000 mm long ( make: THK / HIWIN/KHS) LM bush for above rod flange type ( make: THK / HIWIN/KHS) End effector: overall dimension 360 mm x 240mm x 8 mm thick. Limit switches: D4V8108Z MAKE OMRON
375	PNEUMATIC TROLLEY OVERALL SIZE: 500 X 850 X 550 mm TOP HEIGHT moving frame structure with 6 MM thick MS plate. Trolley travel 570 MM Trolley frame: 1170 x 630 mm with ISMC 75, MOC: MS. Leg height adjustable. Support wheel: Dia 60 x 50 mm width.+ bearing 2 Nos.+ pin 1 No.: 18 set Guide wheel: Dia 50 x 20 mm width.+ bearing 1 Nos.+ pin 1 No.: 8 set Trolley flanged wheel: Dia 65 x 35 mm width, flange dia 80 mm .+ bearing 6004 -2z, 2 Nos.+ pin 1 No.: 4 set Bearing make: FAG/ SKF Trolley pneumatic cylinder: bore 63mm, Stroke: 570 mm with adjustable end cushioning and metallic piston, PU seals: (SMC / FESTO) Limit switches: D4V8108Z MAKE OMRON
376	Major components: Aluminium sheet: 3000 x 1250 x 3 MM thick grade: ALUMINIUM ALLOY 5052 - H 32 2 Nos. MS box section 50 X 50 X 3 MM THK - 4 MTR LONG Ms box section: 25 X 25 X 2 MM THK 240 meters MS sheet: 2500 X 1250 X 3 MM THK 1 No.
377	ELECTRICAL WORKS
378	Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. With necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC. (For all Ckt wiring +LAN+TEL+TV)
379	Supplying and erecting mains with 2x1.5 sq.mm and 1x1.5 sq.mm earth wire FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW.(See note 3 on page no.6)
380	Supplying and erecting PVC insulated PVC round sheathed FR 2.5 sq.mm (50 no. x 0.25mm dia.) 3 core flexible multi stranded copper industrial cable for voltage grade up to 1.1 kV. (For Street Light)
381	Supplying and erecting mains with 2x2.5 sq.mm and 1 x 2.5 sq mm earth wire FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW.(See note 3 on page no.6) (For G.PP)
382	Supplying and erecting mains with 2x4 sq.mm and 1 x 4.0 sq mm earth wire FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW. (See note 3 on page no.6)(From MUPSDB to UPS DB on floor)
383	Supplying and erecting mains with 4x10 sq.mm and 2 x 10 sq mm earth wire FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW. (See note 1 & 3 on page no.6)(From electrical room at GF to UPS input)
384	Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete. (IP=2SW) (For Computer, TV)
385	Supplying and erecting modular type 3 pin 6A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete. (IP=2SOC.) (For Computer, TV.)
386	Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete. (6+16A)
387	Supplying and erecting modular type T.V. socket single outlet, duly erected on provided plate and box with wiring connections complete.
388	Supplying and erecting modular type telephone socket one gang with safety shutter, duly erected on provided plate and box with wiring connections complete.
389	Supplying and erecting modular type computer Jack RJ45 with safety shutter,duly erected on provided plate and box with wiring connections complete.
390	Supplying and erecting modular type switch 16A duly erected on provided plate and box with wiring connections complete. (16A SW.)
391	Supplying and erecting modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete.
392	Supplying and erecting PVC Surface modular switch box with double mounting plate for 4 module complete. (For Lift Duct)
393	Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 1 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. (RJ45, RJ11, TV)
394	Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. (For 2SW+2SOC for Comp., 6+16AS/S)
395	Secondary point wiring for additional light/ bell point, concealed type in min 20 mm FRLS grade PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires with required accessories as per specification No: WG-PW/CW. (LLP)
396	Wiring for plug on board with Switch socket surface/concealed type, copper wiring and earthing and with modular accessories as per specification No: WGPW/CW.
397	Point wiring for light/bell concealed type in min 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WGPW/CW. (LP)
398	2-way Light Point wiring for light Point wiring for light/fan/bell concealed type in min 20 mm PVC conduit with 1.5 sq.mm. FRLSH grade copper wires with moduler type switch and required accessaries as per specification No: WG-PW/CW (Staire case only) Note-3
399	Point wiring for ceiling fan concealed type in min 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WGPW/CW. (FP)
400	Supplying and erecting LED square / circular Max. 18 W down lighter / Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 2000 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs at L70B0 including driver, having mounting arrangement with board for surface type or spring loaded mounting clipscomplete with minimum 2 years warranty as per specification No. FG-IDF/LED.
401	Supplying and erecting bulk head LED fitting max. 10W with high transitivity diffuser with system lumens output of min. 1100 lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., THD<10%, p.f. >0.95, operating range of 140-260V, in built surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, IP66, IK09 rated on provided PVC Block / wooden board with 3 years warranty.. (For Lift Duct Lights)
402	Supplying & erecting 20 SWG G.I sheet metal cawl rectangular / round shaped with 25 x 25x 3 (mm) angle iron frame, metal mesh to avoid birds entry with necessary material, suitable for exhaust fan of 300 mm as per specification no FGFAS/MSC. (For Exhaust Fan)
403	Supplying and erecting fan clamp of 30 x 5 mm. M.S. flat of required length and 10 mm. M.S. bolt and nuts erected with necessary hook of 10 mm. M.S. round bar and painted. (For Ceiling Fan)
404	Supplying and erecting integrated LED street light fitting 40 to 50W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 4400 Lumens, min. efficacy of 110 lumen/W, CRI>70, CCT upto 6500K,THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FG-ODF/FLS2. (SL = 50W)
405	Supplying and erecting street light Wall bracket made from 40 mm. dia ‘ G.I. pipe 1.2 m. in total length complete as per specification no. FG-BKT/WB. (For Street Lights on Wall)
406	Supplying and erecting exhaust fan medium duty 230 V A.C. 50 cycles 225 mm. 1400 RPM with condenser complete erected in position with necessary materials. Fan motor with moisture proof treatment and ‘E’ class insulation.
407	Supplying and erecting Energy Saving BLDC Ceiling fan 230 V A.C. 50 cycles 1200 mm, max. energy consumption of 28W having service ratio (CMM/W) of Min. 8 , PF>0.9, THD<10% with IR remote control/compatible speed regulator, Temperature Rise of Max. 40 deg. C, having external mounted control PCB completely erected in position as per specification no. FG-FN/CF
408	Providing & erecting 7 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130 mm A/F, top 70 mm A/F on provided foundation as per specification no. OH-PL/OPL.
409	Supplying and erecting LED Panel Light(600mm X 600mm) Max. 35 W having CRCA powder coated housing, polystyrene diffuser having system lumens output of Min 4200 Lumens, min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 yearswarranty.
410	Supplying, installing, testing & commissioning split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor. room air conditioning unit 1.7TR to 2.0TR capacity having ISEER minimum 5.0 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant R32 having copper condenser, minimum 2.5PM filter, self diagnosis feature, stabilizer free operation & temperature display on indoor unit, noise level maximum 50dBA at position in provided recess with wooden frame complete specification no. AP-AC/WAC
411	Supplying, installing, testing and commissioning of FPC solar water heating system without heat exchanger type of 300 LPD capacity with SS water tank of 0.5 mm thickness conforming to IS1239 Part-I :2004 complete as per specification no. ESD-SHWS-FPC
412	Supplying, installing, testing and commissioning of 100 kWp ON-GRID Solar PV System / Plant consisting Solar PV Poly Crystalline Panel (335 Wp X 75 Nos.) and Solar ON-GRID Inverter of similar capacity (THD<3%) with interconnecting wires / cables up to solar ON GRID inverter, proper base plate, canopy box to house Inverter and necessary accessories i.e. ACDB/ DCDB , MCB etc. wiring up to solar Inverter in casing and capping, display board, sign board, two distinct earthing, lightning arrester, liaisoning charges, remote monitoring system with maintaining card / chip for 5 years including net charges for RMS System, complete up to net meter installation and export to the grid with 5 year ON-SITE warranty and fully comprehensive maintenance contract as per Specification no. ESD-RT-ONG.
413	Supplying LED concealed type foot / step light with aluminium body for indoor/outdoor application suitable for 4W-6W LED including driver and erecting by making necessary arrangement / recess in wall to make it flush with surface with 1 year warranty.
414	Providing and fixing Nuovo dualflow touch-free infrared hand dryer with intelligent LED display, 1850W rated power, DC brushless motor & double HEPA filter Material: ABS Finish: Silver Model No -Hand dryer -Nuovo HDR-SLV-AK2030 :- 1 Nos Also inculding Soap Dispenser - Automatic SDR-BLC-DJ0160ASN capacity: 0.8L material: aluminium/ ABS f inish: chrome/black :- 1 Nos and also including Paper Towel Dispenser - Towels with c/z Folds - Wall Mounted PTD-SAP-DT0106CSN capacity: 400-600 C/Z towels material: AISI 304 stainless steel finish: satin :- 1 Nos.
415	Providing and fixing AKP-35781PFS Towel Rack 600mm long without Lower hangers, Stainless Steel Hand :- 1 Nos Towel also including ACN-1157 Toilet Roll Holder with Shelf:- 1 Nos
416	Providing and fixing Roseate 3 head pendant Model No:- 58138 ,Colour :- Matt Gold , Material :- Aluminium & Metal , Dimension (mm) :- 325 x 325 x 1675 , Lamp base :- E27 ,Wattage :-3 x 20 Watt :1 Nos , Also providing Stanchion Track Light Track Head Model No:-31446, Colour :- Black & White , Material :- Aluminium,Dimension :-158 x65x125 mm. Lamp Base :- LED,wATTAGE:-20 w, Lumen/CCT:-1500lm/WW,CW: 1 nOS
417	Supply & installation of neon flexible IP65 Profile Light of size (16mmx16mm) with 24V, 120LED, 14W/MTR LED strip with flexible channel. (Lidos Make)
418	Supply & installation of 6.5 A,24 V LED power supply (Driver /Choke) standar make Suitable for PL.
419	Supply ,fixing Painting as per the instructiomn from the engineer incharge.
420	LAN SYSTEM
421	SITC of 5-inch ceiling speaker, 2-way coaxial design, rated power 20W/8Ω and selectable 100V line taps (2.5/5/10/20W), ABS enclosure with metal grill, frequency response 100Hz–20kHz, sensitivity 88dB, max SPL 101dB, cut-out Ø175mm, dimensions Ø203×145mm, weight 1.8kg. Approved Make - ERTHPOT/Workpro/Mark
422	SITC of Column Speaker, Frequency Range (-10 dB) - 70 Hz – 20 kHz, Frequency Response (+/-3 dB) - 105 Hz – 20 kHz, Power Rating (8Ω setting) - 160W Continuous Program (2 hrs) 80W (320W peak) Continuous Pink Noise (2 hrs), 60W (240W peak) Continuous Pink Noise (100 hrs), Sensitivity (2.83V @ 1m) - 86 dB, Coverage Pattern - Vertical 110° [1kHz-4 kHz average];. Rated Maximum SPL - 105 dB Continuous (111 dB peak) @ 1m.Approved Make - JBL/Erthpot, Workpro
423	SITC of stereo mixer amplifier with 2x100W RMS @8Ω / 200W @100V line output, frequency response 20Hz–20kHz, THD<0.1%, 3xLINE inputs (one with Bluetooth), 1xMIC input, RS485 control, priority input, short-circuit/overload/thermal protection, rack mountable 2U, 230V AC input.Approved Make - ERTHPOT/Workpro/Mark
424	SITC of Network Centralized Controller, capable of controlling up to 110 devices, with IR, RS232, Relay, and TCP/IP control, LCD touchscreen 4.3”, support for Erthpot automation software, PoE powered, wall mount type, with GUI customization and scheduling function.Approved Make - ERTHPOT/Workpro/Mark
425	SITC of Chairman Unit, desk-mount type microphone for digital conference system, designed for Nova Series Controller, with CAT-5e/6 daisy-chain connectivity for audio, control and power via RJ45 ports.The unit shall have a gooseneck unidirectional condenser microphone, frequency response 50 Hz–20 kHz, sensitivity –20 dBV (±3 dB), and SNR ≥ 100 dB with THD < 0.1% ensuring clear and distortion-free speech reproduction.The chairman unit shall include a priority override function to mute delegate microphones, illuminated LED ring for active/mute indication, and push-to-talk button with indicator.The body shall be made of aluminium alloy die-cast housing, desktop mount design, with power consumption ≤ 0.8 W @ 24 V DC (powered via system controller).Connectivity shall be through RJ45 loop-through ports using CAT-5e/6 cable supporting daisy-chain topologyApproved Make - ERTHPOT/Workpro/Mark
426	SITC of Delegate Unit, desk-mount type digital conference microphone designed to work with Erthpot Nova Series Controller, featuring CAT-5e/6 daisy-chain connectivity for power, audio, and control through RJ-45 loop-through ports.The unit shall be equipped with a gooseneck unidirectional condenser microphone having frequency response 50 Hz – 20 kHz, sensitivity –20 dBV ± 3 dB, SNR ≥ 100 dB, and THD < 0.1% for clear speech reproduction.The delegate unit shall include a push-to-talk button, illuminated LED ring on microphone head for active/mute indication, and a status LED on the base.The body shall be aluminium alloy die-cast, tabletop design, powered via 24 V DC from the controller through CAT cable, with power consumption ≤ 0.8 W.Units shall support loop-through/daisy-chain connection with the system supporting hot-plugging and seamless operation.Approved Make - ERTHPOT/Workpro/Mark
427	SITC of Digital Signal Processor a professional-grade 8×8 digital audio signal processor with integrated DSP, AEC (Acoustic Echo Cancellation), ANS (Automatic Noise Suppression), AFS (Automatic Feedback Suppression) and full control capability via software or network interface, suitable for conference rooms, auditoriums and integrated AV systems.The unit shall provide 8 balanced audio inputs and 8 balanced audio outputs (Phoenix/Euroblock connectors), along with 2×2 USB audio interface for PC integration, recording or conferencing.It shall feature 16×16 GPIO and multiple RS-232 control ports for third-party control and automation integration.The DSP shall support parametric equalization, mixing matrix, gain control, priority ducking, delay, and dynamics processing on each channel, with real-time control via GUI over LAN/USB.The device shall support 48 kHz / 24-bit processing, low latency, and user presets for scene recall.The unit shall be 19\\" rack-mountable, fanless for silent operation, and powered by 230 V AC 50 Hz supply.All parameters shall be configurable through Erthpot DSP control software and compatible with third-party control systems.Approved Make - ERTHPOT/Workpro/Mark
428	SITC of professional dual-channel UHF wireless handheld microphone system suitable for conference rooms, auditoriums, events, and corporate installations.The system shall include one dual-channel receiver and two handheld transmitter microphones, offering clear, stable, and interference-free audio transmission with wide coverage range.The receiver shall operate in the UHF frequency band (500–900 MHz) with dual independent channels, each having individual volume control, RF/AF level indicators, and LCD display showing frequency, channel, and battery status.The transmitters shall feature dynamic cardioid capsules with on/off mute switch, LCD display, and battery life indication.The system shall support PLL synthesized frequency control, up to 200 selectable frequencies per channel, and automatic frequency synchronization (IR sync) between transmitter and receiver.The receiver shall provide balanced (XLR) and unbalanced (¼” Jack) outputs for mixer or amplifier connectivity, powered via 230 V AC / 12 V DC adaptor. Approved Make - ERTHPOT/Workpro/Mark
429	Smart Interactive 4K display \| Size: 86”\| 7H Hardness \| Anti Glare + Anti-Fingerprint + Antimicrobial Tempered Glass \| 500 nits 86” \| In built Android 14.0 with Android Safe Mode, RAM 8GB, ROM 64GB + 64GB = 128GB, Upgradable to 320GB \|CPU (4 Core + 4 Core) \| 20 points Touch in Android & 40 points touch in Windows \| Embedded Blue Eye Filter \| Anti-Microbial Surface \| Smart Object recognition and responsive multi-touch \|4ms Touch Response time \| Multiple Inputs/Outputs for connectivity \| 40W Speakers \| Slimmer Frame \| Type C Connectivity - 65W \|Customize GUI with Secure User Profiles \| Inbuilt Software for Casting /Broadcasting /Display Remote Management with OPS.Approved Make - Newline/Samsung/LG
430	SITC of Switcher unit, designed for modern conferencing/meeting environments. The unit supports 4 input sources (2 HDMI + 2 USB-C with 60 W PD), dual HDMI outputs (independent or mirror), USB 3.0 hub for peripherals, multiview layout (display up to 4 sources simultaneously), and built-in wireless casting via Apple AirPlay/Miracast for up to 4 wireless devices. Driver Less Wireless BYOD Support Through Dongle, The system shall include cabling, mounting (under-table or rack), configuration, and hand-over.Approved Make - Wyrestorm/Lightware/Muxlab
431	SITC of the, a high-performance USB-C wireless casting dongle that turns any USB-C computer/laptop into a wireless presenter device with support for USB-peripherals and no app installation required. The device shall be used in conjunction with compatible WyreStorm presentation systems to allow wireless screen sharing (4K30) and USB peripheral (camera/mic) data return.Approved Make - Wyrestorm/Lightware/Muxlab
432	SITC of one transmitter and one receiver unit, designed for extension of 4K UHD/HDR video, HD multichannel audio, IR/RS-232 pass-through and 2-way PoH (Power-over-HDBaseT) over a single CAT-5e/6 cable. Suitable for board-rooms, auditoria and AV distribution systems.Approved Make - Wyrestorm/Lightware/Muxlab
433	SITC of Cable Cubby with 2 x Universal Power, 1 x USB-A Mobile Charger, 1 x USB-C Mobile Charger, 2 x HDMI 2.1V, 1 x Type A USB 3.2 Gen 1, 1 x Type C USB 3.2 Gen 2, 2 x CAT 6 Network/RJ-45.Approved Make - Logic/Extron/Crestron
434	SITC of high-performance PTZ (Pan-Tilt-Zoom) camera designed for hybrid conferencing rooms, boardrooms, lecture halls and similar installations. The unit shall provide Full HD 1080p @ 60 Hz video with smooth motorised pan and tilt, 12× optical zoom, dual/tri-output (USB, HDMI, LAN) and control via RS-232 or LAN (VISCA) protocol.Approved Make - Wyrestorm/Lightware/Muxlab
435	SITC of professional-grade HDMI distribution amplifier/splitter supporting single HDMI source input and four HDMI outputs. The unit shall support up to 4K@60 Hz 4:4:4, HDR (HDR10 / Dolby Vision) and include built-in scaler capability so that mixed 4K and 1080p displays can be used simultaneously.Approved Make - Wyrestorm/Lightware/Muxlab
436	SITC of Control Processor, Relay Output 1–8, I/O 1–8, IR - Serial Output 1–8, RS232/RS485 - 3, Memory - (1) SD memory card slot, USB - (1) USB Type A connector, female;USB 2.0 port for storage devices, LAN - 1) 8-pin RJ45 connector, female;100/1000Base-TX Ethernet port.Approved Make - Crestron/Wyrestorm/Muxlab
437	SITC of Touch Panel (10th Generation): 27.69 cm (10.9″) Liquid Retina Display, 64GB, Wi-Fi 6 with Base port and SleeveApproved Make - Apple/Iport
438	SITC of 10-Port Gigabit Ethernet Smart Switch with 8 PoE Ports and 2 Dedicated SFP Ports.Approved Make - Netgear/Cisco/Juniper
439	SITC of PDUNominal Input Voltage - 100 – 240 VACMaximum Input Current - 16ASupports RS-232 port and power outlet control (on/off) by outlet groupRemote and local power outlet control (On/Off, Power Cycle) by individual outlets and outlet groupsProactive Overload Protection (POP) – automatically powers off the last outlet that caused the current overload to protect high-end A/V equipmentApproved Make - Aten/Farman
440	12U AV equipment rack with Acessories (Fan, Shelf, Blanker & PDU)Approved Make - Valrack/Netrack
441	Bulk Cables & Various types of A/V connectors (Lumpsum) Miscellaneous installation accessories
442	Cashew Board Office Furniture and allied works
443	Providing and fixing frame work of anodised aluminium sections for suspended false ceiling consisting of aluminium T 50 mm x 40 mm weighing 0.39 Kilogram/m. at 60 cms c/c and fixed with ( 15 x 15 mm) flanges weighing 0.119 Kilogram/m suspended on 6 mm dia. mild steel rod weighing 0.22 Kilogram/m fixed on wall and beams including rounding of the edges with aluminium T of 50 mm x 40 mm weighing 0.39 Kilogram/m etc.including all labour etc. complete.
444	Second Floor
445	Providing and fixing false ceiling of 10 to 12 mm thick decorative boards of fibrous plaster of paris including scaffolding if necessary all architectural work like mouldings, cornices, coves, domes, cups as per detailed drawings and three coats of spray painting to boards etc. complete. (excluding frame work, runners and mild steelsuspenders).
446	Second Floor
447	Providing and fixing in position Gypsum board false ceiling with 12.5 mm thick Gypsum boards, screwed/fixed to the under structure of suspended G.I. Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 x 50 mm maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should betaped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels. Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts etc. all complete.
448	Second Floor
449	Providing and fixing 15 mm thick eco-friendly densified edge calcium silicate false ceiling of approved texture of size 595mm x 595mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections (galvanising at @12 gm/sq.m including both sides) consisting of main T runner suitably spaced at joints to get required length and size 24X38mm. made from 0.33mm thick(minimum ) sheet, spaced 1200mm center to center and cross T of size 24X28mm made of 0.33mm thick(minimum ) sheet to be interlocked at the middle of the 1200x600 mm panel to form the grid of size 600x600mm resting on periphery walls/partitions on a perimeter wall angle precoated steel of size 24x24x3000 made of 0.4 mm thick (minimum) sheet with the help of all plugs at 450mm and laying 15 mm thick densified edges calcium silicate ceiling tiles of approved texture (spintone/cosmos/hexa) in the grid, including light fittings , fixtures , smoke detectors etc., wherever required. Main T runners suspended from ceiling with using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling using 12.5mm dia. And 50mm long dash fasteners, 4mm G.I. adjustable rods with galvanized steel levels clips of size 85x30x0.8mm, spaced at 1200mm center to center along main T bottom exposed with 24mm of all T-sections shall be prepainted with polyester baked paint, for all heights, as per specifications, drawings etc. complete.(currently this item should be used only for VIP cabins)
450	Second Floor
451	Providing and applying impression 24 carrat Luxury paint of approved make & approved brand Emulsion paint to interior walls and ceilings of approved quality, colour and shade to new surface in two coats, including sub surface prparation by Acrylic putty and Acrylic primer coats including scaffolding, preparing the surface. etc. complete(Low VOC).
452	Second Floor
453	Providing and laying vitrified matt fininsh tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc.complete.
454	Second Floor
455	Providing and laying vitrified matt finish tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc.complete.
456	Second Floor
457	Providing and fixing in position (as per 1868 / 1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 Kilogram/One Running Metre. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 Kilogram/One Running Metre.. Top and side track section 92 x31.75 x 1.30 mm at weight 0.933 Kilogram/Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/One Running Metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/Running metre. and handle and top section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising with box
458	Second Floor
459	Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete.
460	Second Floor
461	Tea Table 900mm X 750mm X 450mm for m.s. ante chamberProviding And Fixing Of Tea Table 900mm X 750mm X 450mm With 12mm Thick Colour Eitched Tempered Glass With Bevelled Drawing Made Out Of 18mm Thick Waterproofing Ply. The Outer Laces To Be Finished With High Quality 4 Mm Thik Veneer Or 1 Mm Thik Mica Etc.
462	Second Floor
463	Sofa Set 3+1+1Providing & fixing Sofa Set 3+1+1 Brown and Cream leather DIMENSION Length:182.5 (cms) Breadth (cms): 100 (cms)Height (cms): 100 (cms) Weight (Kilograms): 66 (Kilogram) Seating Capacity: Five Seat
464	Second Floor
465	Providing & Fixing Curviliner Workstation @ 1500/1500Lx600/600Dx750HT Providing & Fixing Curviliner Workstation @ 1500/1500Lx600/600Dx750HT,Curvilinear Table Top @ 1500/1500Lx600/600D :- TOP to be made of 25 mm thick Prelaminated particle board with PVC edge band, GABLE END to be made of 25 mm thick Prelaminated particle board with PVC edge band, KEYBOARD TRAY ( WITHOUT MOUSE TRAY ) :- Metal Powder Coated - Black Color, CPU TROLLEY :- Metal Powder Coated - Black Color, along with 3 DRAWER PEDESTAL UNIT having overall size 392L x 450D x 680Ht. mm. with central lock and key. 3 Drawers and body are complete metal with powder coat finish, facia in 18 mm prelaminated particle board,
466	Second Floor
467	Full Height Steel Storage @ 750Lx450Dx2100HTProviding and fixing Openable Steel Storage of 750 x 450 x 2100Ht, with 4 adjustable shelves, Complete body & shutter made in 0.8 mm thick & Top in 2 mm thick CRCA, 4 Shutter to be mounted with the help of cup hinges, and 4 adjustable levelers, enitre storage in powder coated finish with 60 to 80 microns as as per drawing.
468	Second Floor
469	Bed Side Table @ 400LX 400DX 415HProviding and Fixing Bed Side Table of size 400LX 400DX 415H The bed side unit is made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The bed side table has one drawer and one shelf. The shelf is made of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding
470	Second Floor
471	Providing and fixing 15 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete.
472	Second Floor
473	Providing and fixing 25 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete.
474	Second Floor
475	Providing and fixing screw down for 32 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete.
476	Second Floor
477	Providing and fixing coloured glazed earthenware full stall type Urinal with P.V.C. flushing cistern of 5 liters capacity with fitting, inlet pipes and stop tap brackets for fixing the cistern 32mm dia. P.V.C. flush pipe with fittings and flushing arrangement including lead soil pipe, lead trap soil pipe connection up to the outside face of the wall.
478	Second Floor
479	Providing and fixing chromium plated towel rod 16 mm dia and 75 cm. in length including all accessories complete.
480	Second Floor
481	Providing and fixing 40 mm. dia Ball cock medium type with PVC float including sockets and necessary fittings and tested as per municipal requirements etc. complete.
482	Second Floor
483	Providing and fixing 15 mm. dia Ball cock medium type with PVC float including sockets and necessary fittings and tested as per municipal requirement etc. complete.
484	Second Floor
485	Providing and fixing 75 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent,clamps etc. complete
486	Second Floor
487	Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe andwith necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete.
488	Second Floor
489	Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directedetc. complete.
490	Second Floor
491	Providing and fixing on walls/ceiling/floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directedetc. complete.
492	Second Floor
493	Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
494	Second Floor
495	Providing and fixing on walls/ ceiling/ floor 32 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directedetc. complete.
496	Second Floor
497	Providing and fixing on walls/ ceiling/ floor 50 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete.
498	Second Floor
499	Providing and fixing 10 cm PVC nahani trap with grating etc. complete.
500	Second Floor

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Maharashtra Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Renovation Of Existing Facilities In Irradiation Facility Centre And Vegetable Processing Facility At Plot No. 3, Sector-19F, Apmc Market, Vashi, Navi Mumbai, Thane-Maharashtra

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Renovation Of Existing Facilities In Irradiation Facility Centre And Vegetable Processing Facility At Plot No. 3, Sector-19F, Apmc Market, Vashi, Navi Mumbai, Thane-Maharashtra

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us