|
| 1 | Removing old lime or cement plaster from walls including raking out joints 12 mm deep and removing the debris within 50m lead etc. all complete as directed by the Engineer-in-charge. |
| 2 | Dismentalling A.S. Flooring including watering curring etc. |
| 3 | Dismantling G.C.I. or A.C. sheet roofing after carefully removing the bolts and nuts including stacking of he materials for reuse and removing the debris within 50m lead |
| 4 | Dismentalling Tile Flooring including watering curring etc. |
| 5 | Dismantling and removing old tiled cladding from walls including racking out joints 12mm deep stacking the useful materials for within 50m lead. |
| 6 | Dismantling brick or stone masonry in lime or cement mortar under 3m. height including stacking the useful materials for reuse and removing the debris within 50m. Lead etc. |
| 7 | Dismantling and removing R.C.C.columns beams, Roof slab staircase landing lintels including stacking the useful materials for reuse and removing the debris within 50m lead |
| 8 | Scarping old Paint with scarper or Sand Paper and washing with soap water scafolding charges of any height etc. |
| 9 | Earthwork in all kinds of soil in excavation of foundation trenches for columns, basement, tie beams, walls and steps in all kinds of soil including moorum, hard stoney earth and earth mixed with boulders except sheet rocks and boulders requiring blasting with all leads and lifts including dressing and leveling the bed sides up to required depth and depositing the excavated materials at places away from the work site with all leads and lifts, T&P for shoring, shuttering, dewatering if required etc. complete as per the drawing, designing including cost of all labour, T&P etc. as required for the work complete as directed by the Engineer-in-charge. |
| 10 | Supplying and filling the foundation and plinth with clean coarse river sand of approved quality from approved quarry, laying in layers not exceeding 150mm thick, watering and ramming including cost,conveyance, royalty and taxes of all materials, cost of all labour, T&P etc. as required for the work complete as per the direction of the Engineer-in-charge. |
| 11 | Providing & laying cement concrete of prop. (1:4:8) in foundation bed and floors using 40mm nominal size down graded, screened, washed hard black crusher broken granite metal of approved quality & from approved quarry including laying in the layers not exceeding 150 mm thick, hoisting, lowering, laying, watering and curing etc. complete to the required levels including cost, conveyance, royalty and taxes of all materials, cost of all labour, T&P etc. as required for the work complete and as per direction of Engineer-in-charge. |
| 12 | Fly ash bricks of 25cmx12cmx8cm. Size having crushing strength not less than 75 Kg/Sqcm. With dimensional tolerance +2%. percentin cement mortar (1:6) in foundation and plinth etc. Complete. |
| 13 | Fly ash bricks of 25cmx12cmx8cm. Size having crushing strength not less than 75 Kg/Sqcm. With dimensional tolerance +2%. percentin cement mortar (1:6) brick masonary in super structure etc. Complete. |
| 14 | R.C.C work in ground floor of M-20 grade with 20mm & down grade crusher broken hard Granite chips including hoisting & laying with cost of all labour, materials with all taxes, lead ,T & P etc all complete .Column Base |
| 15 | Plinth Band |
| 16 | Column |
| 17 | Lintel |
| 18 | Chajja |
| 19 | Roof Slab |
| 20 | Straightening, cutting, bending and binding, welding and jointing (if necessary ) coiled/ bent up MS Rods /Tor Steel/deformed rods etc. including hoisting, placing in position, tying the grills binding with 18 to 20 gauge binding wire required for R.C.C work including cost, conveyance, taxes of all materials, cost of all labour, T&P etc. as required for the work complete (weight of binding wire will not be considered) as directed by Engineer-in-charge. (Payment will be made on actual weight of M.S rods or Tor steel linear measurements of rod for finished item of works. 5% wastage and lap length are included in the finished rate). |
| 21 | 2.5cm. thick grading concrete (1:2:2) on roof slab with 6mm. Size on new work crusher broken Granite chips etc complete. |
| 22 | Supplying fitting and fixing M,S. Grill as per specification etc. |
| 23 | Fitting & fixing G.C.I. Sheet in roof drilling hole in wind ties including fixing of ridges valleys wind ties including cost of materials ,labour for fixing etc all complete |
| 24 | Supply fitting and fixing two track UPVC Window as per Specification etc(misc. P-233 |
| 25 | Providing ,fixing of false celling with Aluminium anodised T section No. 3215 with 2feet C/C ,L section 1705 up to 15 micron on 4 walls to be fixed by means of steel screw P.V.C plug Alumunium grid 2ftx2ft with pre laminated particle board suspended from celling etc all complete. including cost of scaffolding stagging charges with cost of all materials ,labour, T & P etc all complete. |
| 26 | Providing fitting, fixing of Al. door with anodized Al. door section of 9202 as vertical member, 9201 as top member and 9200 as bottom and middle member with frame section as 9221 with tapered clip No. 4660 and the frame to be completed by means of jointing angle No. 1855 including all cost of labour, T&P, hire charges of drilling machine, labour charges etc. complete excluding cost of laminated board. |
| 27 | Supplying fitting and fixing PVC Door for Toilet as per specification incl cost of all fittings as per specification etc. |
| 28 | 12mm. thick cement plaster (1:6) on brick work in etc. |
| 29 | 6 mm thick cement plaster (1:4) to R CC surfaces finished smooth including closed deep chiping and slury treatment including watering curiing etc. Complete. |
| 30 | 16mm. thick cement plaster (1:6) on brick work including watering curring etc. Complete. |
| 31 | Supplying all materials, labour, T&P for laying P.C.C (1:2:4) using 12mm size c.b.h.g chips incl. well curing cost of conveyance & royality taxes etc all complete as per specification and direction of the Engineer-In-Charge |
| 32 | Supplying, fitting and fixing vetrifed tile in floors of size 600mm x 600mm of approved make confirming to IS 13755 laid on 20 mm thick cement mortar 1:4 and filling joints with white cement of approved quality including cost of all materials, labour T&P etc required for the work all complete as per direction of Engineer in charge. |
| 33 | Fixing Tiles to dados skirting & risers on 12mm. thick C.P (1:3) jointed with neat cement slurry without cost of precast tiles. |
| 34 | Cement washing two coats on plaster surface including watering curring etc. |
| 35 | Supplying all labour and T&P for for cutting the tree as per specification etc. |
| 36 | Wall painting 2 coats with Weather Coat of approved shade on one coat of Primer incl. Cost of Paint,Primer,Labour,T&P etc. |
| 37 | Enamel Painting two coats with any approved paint including cost of all labour, materials T & P with taxes, transportation etc all complete in . |
| 38 | Remove excavated materials from site by Mechanical means with loading and unloading the same within 5km away from site. |
| 39 | Fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701--1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position etc all complete as per specification and direction of the Engineer in charge |
| 40 | Supplying all materials,labour and T&P for Cutting holes through existing brick work including making good the same in cement mortar (1:4) for taking SW/PVC pipes and fittings etc all complete as per specification. |
| 41 | Supplying all materials,labour and T&P for Cutting holes through existing brick work including making good the same in cement mortar (1:4) for taking GI/PVC pipes and fittings etc all complete as per specification. |
| 42 | Supplying all materials,labour and T&P for cutting groves in pucca floor and walls for taking G.I. pipes and fittings /P.V.C. pipes and fittings and making good to the damages all complete as per specification. |
| 43 | Fixing water closet, squatting pan (Indian type W.C pan) conforming to IS 2556 : Part 3-2004 duly embedded in cement concrete (1:4:8) using hard granite metal 4cm nominal size all complete as per specification |
| 44 | Supplying all materials, labour and T&P and fixing to walls,ceiling and floor unplasticized PVC pipes conforming to IS.4985 of Sch-80 the following nominal diameter with fittings and clamps including testing as per specification all complete. A) 25 mm dia PVC ASTM Pipe- |
| 45 | B)20mm dia PVC Pipe |
| 46 | C) 15mm dia G.I. Pipe |
| 47 | Supplying all materials, labour and T&P for fitting fixing of following types of P.H. Fittings etc. all complete. A) 15mm dia CP 2 in 1 Tap |
| 48 | 15mm dia c.p.short body bib cock |
| 49 | 15mm dia CP Conceal stop cock |
| 50 | 15mm dia CP Angle stop cock |
| 51 | 25mm ia G.M. FWV |
| 52 | CP Towel Ring |
| 53 | Glass Self |
| 54 | Swan neck pillar cock |
| 55 | CP Health Foucet with 1.0 mtr PVC Tube |
| 56 | 32mm pvc Waste pipe |
| 57 | 32mmx 1150mm long PVC waste pipe |
| 58 | 15mmx600mm PVC connection pipe |
| 59 | Supplying all materials,labour and T&P for fixing 10ltr capacity PVC low level cistern with a pair of PVC brackets complete with fitting such as siphonic arrangement,15mm. nominal size brass/PVC ball valve with polythene float chromium plated brass handle, unions and couplings for connection with inlet, outlet and over flow pipes, 32mm.dia. PVC long flush bend, 12mm.dia. PVC inlet connection pipe,15mm CP angle cock including cutting holes and making good the same and connecting the flush bend with cistern and closet and the inlet pipe with supply main etc.all complete as per specification. |
| 60 | Supplying all materials,labour, T&P for fitting & fixing U PVC S.W.R pipes(4kg/cm2) and fittings of the following outside diameter including jointing with approved solvent cement by non-heat application method testing as per specification with lead of all materials to site. .i)110mm dia pvc pipe |
| 61 | ii) 110mm dia U. P.V.C door Tee |
| 62 | iii) 110mm dia U. P.V.C door bend |
| 63 | iv) 110mm dia P.V.C offset |
| 64 | v) 110mm dia P.V.C clamp |
| 65 | vi) 110mm dia P.V.C cowl |
| 66 | vii) 110mm dia P.V.C socket |
| 67 | Supplying of all materials,labour,T&P for fixing Wash hand Basin with hole for pillar cock with cast iron/M.S. brackets painted white including cutting holes in walls and making good to the damages etc all complete as per specification and direction of Engineer-in-charge.(18\\"x 12\\"(450x300) W.H.B) |
| 68 | Supplying all labour and T&P for cleaning the man hole chamber etc complete. |
| 69 | Supplying all labour and T&P for cleaning the Sewer line etc complete. |
| 70 | Supplying all labour and T&P for cleaning the Septic tank etc complete. |
| 71 | Supplying all materials, labour and T&P for construction of inspection chamber as per P.H. specification and design all complete. [ excluding earth work ] (per each ) |
| 72 | RCC Ring Tank(Soak way pit) 1.20 m dia x 1.5 mtr deep Please Enable Macros to View BoQ information |
