|
| 1 | BoQ BOQ Represent (%) Percentage having Above/ Below ( + or - denomination) the Lump sum pre price inserted by MES BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : GARRISON ENGINEER TEZPUR (NORTH) NAME OF WORK : MAINTENANCE OF CERTAIN B/R ITEMS AND PETTY REPAIRS INCLUDING ROOFING, JOINERY, FLOORING, SANITARY FITTINGS, WALL CLADDING, PLINTH PROTECTION, SANITARY ITEMS & PERIODICAL SERVICES & REPAIR WORKS OF SECT I TO IV AT AGE CHARDUAR UNDER GE(N) TEZPUR. Contract No : GE(N)/TEZ/ OF 2026-2027 (File No. 8252/E8) Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Ser.No. Description of items of works Item Code / Make Approx No. of quentity required. Units Pre Priced Rate (in. Rs.) as Defined by MES Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures to be entered by the Bidder Rs. P. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT (In INR) TOTAL AMOUNT With Taxes TOTAL AMOUNT (In Words) |
| 2 | Dismantling of floor hearth or wall tiling incl cement mortar bedding ( but not backing) and removing debris and rubbish off the premises complete all as specified and as directed. |
| 3 | Taking down cement plaster from brick or concrete surfaces of any description including racking out joints, hacking for key, scrubbing down with water etc and including rubbish off the presises complete all as specified and directed. |
| 4 | M&L for 15mm thick screed bed or bedding layer in cement mortar (1:6) for laying floor/roof finishes etc. complete all as specified and directed. |
| 5 | M&L for rendering 10mm thick on brick or concreteor stone surfaces in cement mortar (1:4) as in screed bed/backing coat for laying wall finishes complete all as specified and directed. |
| 6 | M&L coloured glazed ceramic tiles of size 300x200x7 or 350x250x7mm or 450x350x7 mm thick, in vertical surfaces, skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. |
| 7 | M&L for 25 mm thick cement concrete (1:2:4) type B1 ( 20mm graded crushed stone aggregate) as in floor finished rough to receive floor finishes complete all as specified and directed. |
| 8 | M&L Non-skid joint free coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceding 0.18sqm but not exceeding 0.36 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. |
| 9 | M&L Non-skid joint free coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceding 0.18sqm but not exceeding 0.36 sqm, in skirting/dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. |
| 10 | M&L for non skid ceramic colour tiles, 7 to 8 mm thick, area of each tiles exc 0.06sqm but not exc 0.11 sqm squre / rectangular in floor set and jointed in neat cement slurry and pointed in cement mixed with colour pigment to match over 15 mm thick screed bed or bedding layer in cement mortar(1:4) as in floors for receiving tiles complete all as specified and as directed. |
| 11 | M&L for providing machine cut polished Kota stone slab 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing in floors or horizontal surfaces complete all as specified and directed. |
| 12 | S&F for Kota stone 20-25 mm thick in riser of steps, skirting, dado and pillar laid over cement screed in vertical surfaces complete all as specified and directed. |
| 13 | M&L for Granite (of any type) slab 20-25 mm thick machine cut ,bedded and jointed with gray cement slurry and pointed with white cement with admixiture of pigment to match the shade of granite stone indluding grinding and polishing complete all as specified and directed. |
| 14 | M&L for Granite (of any type) slab 20-25 mm thick machine cut, in skirting / dado laid over cement screed and jointed with gray cement slurry and pointed with white cement with admixiture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed. |
| 15 | S&F Hardcore of gauge n.exc 63mm, deposited, spread and leveled in layers n.exc 15mm thick watered and rammed to true surface using broken stone aggregate complete all as specified and directed. |
| 16 | S&F for 75mm thick cement concrete type C2, 1:3:6 (using 40mm crushed stone graded aggregate ) as in foot path/plinth protection or similar and making finished even and smooth without using etra cement complete all as specified and as directed. |
| 17 | S&F for 100mm thick cement concrete type B2, 1:2:4 (using 40mm graded crushed stone aggregate ) as in hard standing and making finished even and smooth without using extra cement complete all as specified and as directed. |
| 18 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness &size/shape, made by table vibratory method using PU mould, laid in required colour &pattern over and including 30mm thick comnpacted bed of fine sand, compcting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plkate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per specified and directed. |
| 19 | M&L PCC 1:3:6 type C1 using 20 mm graded crushed stone aggregate as in coping, kerbs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as per specified and directed. |
| 20 | M&L RCC type B1 (1:2:4) using 20 mm graded crushed stone aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, blaconies, canopies, deck slabs and in shelves and the like complete all as per specified and directed. |
| 21 | M&L for TMT bars, 10 mm dia and over cut to length, bent to shape required including cranking ,bending spirally, hooping for columns, hookings/ends and binding with and including MS wire not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 22 | Use and Waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar work; exc. 200m thick (Horizontal or sloping) Fair finished surfaces of concrete flat complete all as per specified and directed. |
| 23 | Material and labour for brick work with sub class ‘B’ bricks straight or curved on plan exc 6 m mean radius built in cement mortar ( 1:6) including demolition of old unserviceable complete all as per specified and directed. |
| 24 | M&L for Brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:6 including demolition of old unserviceable complete all as per specified and directed. |
| 25 | M&L for 15mm thick rendering in cement mortar (1:6) on fair faces of brickwork or concrete surfaces and finishing the surface even and smooth without using extra cement including taking down of old unserviceable complete all as specified and as directed. |
| 26 | M&L for 5mm thick rendering in cement mortar (1:3) on concrete surfaces, in ceiling,and finishing the surface even and smooth without using extra cement including taking down of old unserviceable complete all as specified and as directed. |
| 27 | M&L for rendering 15mm thick plaster in two layers (i.e. 10mm and 5mm) in CM (1:4) mixed with water proofing compound 200ml per bag of cement on top layer finished on fair face of brick or concrete surface finished including taking down of old unserviceable complete all as specified and directed.Note:- WPC shall be measured and paid seperately under respective item of BOQ. |
| 28 | Supply integral water proofing compund conforming to IS and as approved complete all as specified and directed. |
| 29 | Gl wire netting 0.90mm dia & 12mm mesh lathing to wood or metal studding, joists, etc. in walls. Ceilings, stanchions, beams, etc. including all laps, cutting & waste complete all as specified and directed. |
| 30 | M&L Rendering 10mm thick on stone masonry surfaces or surface other than one face of lathing in CM (1:6) including taking down of old unserviceable complete all as specified and directed. |
| 31 | M&L Rendering 10mm thick on stone masonry surfaces or other side of lathing of lathing in CM (1:6) including taking down of old unserviceable complete all as specified and directed. |
| 32 | S&F for steel tubing of 15mm bore 'medium grade' galvanised, with all fitting and fixed complete incl cutting chasing pinning and making good to walls and ceilings or laid in floors including taking down or up of old unserviceable complete all as specified and directed. |
| 33 | S&F for steel tubing of 20mm bore 'medium grade' galvanised, with all fitting and fixed complete incl cutting chasing pinning and making good to walls and ceilings or laid in floors including taking down or up of old unserviceable complete all as specified and directed. |
| 34 | S&F for steel tubing of 25mm bore 'medium grade' galvanised, with all fitting and fixed complete incl cutting chasing pinning and making good to walls and ceilings or laid in floors including taking down or up of old unserviceable complete all as specified and directed. |
| 35 | Fixing and connecting only for steel tubing of 15mm bore 'medium grade' galvanised, with all fitting and fixed complete incl cutting chasing pinning and making good to walls and ceilings or laid in floors including taking down or up of old unserviceable complete all as specified and directed.Note:- The serviceable retrieved pipe from taking down shall be re-used under this item after cleaning. |
| 36 | Fixing and connecting only for steel tubing of 20mm bore 'medium grade' galvanised, with all fitting and fixed complete incl cutting chasing pinning and making good to walls and ceilings or laid in floors including taking down or up of old unserviceable complete all as specified and directed.Note:- The serviceable retrieved pipe from taking down shall be re-used under this item after cleaning |
| 37 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunsheds, shelves, lintel etc. and cutting chases for concealed water tubing or concealed conduit wiring etc. complete all as specified and directed. |
| 38 | S&F for CPVC pipesof 16mm bore, SDR 11 with and including Plain CPVC SDR 11 fittings fix in trenches or laid in floor complete all as specified and directed. |
| 39 | S&F for CPVC pipesof 20mm bore, SDR 11 with and including Plain CPVC SDR 11 fittings fix in trenches or laid in floor complete all as specified and directed. |
| 40 | S&F pre-painted colored trapezoidal profiled Galvalume/ aluminum zinc coating GI based corrugated steel sheet with min 0.50 mm TCT confirmin to IS-513 (AZ-150 GSM, AL Zn alloy metalic coating 550 Mpa yield stress as per AS-1397) as in roof covering/ cladding to wall fixed with self tapping screws colour /exterior coat of silicon modified polyster/ BHP X RW paint system 20 micron top coat applied over 5 micron primer and a 5 micron polyster back coat applied over 5 micron primer, all fixed with Galvanised self drilling self-tapping fastener (12-14 x 55 with EPDM seals) including dismantling of old unserviceable complete, all as specified and directed. |
| 41 | S&F pre-painted colored plain sheet profiled Galvalume/Zincalume sheet with min 0.50mm TCT confirmin to IS-513 (AZ-150 GSM, AL Zn alloy metalic coating 550 Mpa yield stress as per AS-1397), as in roof covering/ cladding to wall fixed with self tapping screws colour /exterior coat of silicon modified polyster/ BHP X RW paint system 20 micron top coat applied over 5 micron primer and a 5 micron polyster back coat applied over 5 micron primer, all fixed with Galvanised self drilling self-tapping fastener (12-14 x 55 with EPDM seals) including dismantling of old unserviceable complete, all as specified and directed. |
| 42 | M&L for 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc including dismantling of old unserviceable complete, all as specified and directed. |
| 43 | Dismantling framed timber scantlings 40 sq. cm & over in section, in any position complete, all as specified and directed. |
| 44 | M&L for 2 nd class hard wood scantling wrought finished in any position over and 40 sq. cm & over in section,complete all as specified and directed. |
| 45 | S&F second class hard wood plain fillets square,rectangular or triangular in section, wrought secured with screws, cross sectional area exceeding 6 Sq.cm but not exceeding 13 Sq.cm including dismantling of old unserviceable complete, all as specified and directed. |
| 46 | S&F second class hard wood plain fillets square, rectangular or triangular in section, clean sawn secured with nails, cross sectional area exceeding 13Sq.cm but not exceeding 25 Sq.cm including dismantling of old unserviceable complete, all as specified and directed. |
| 47 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing including dismantling of old unserviceable complete, all as specified and directed. |
| 48 | S&F 4 mm thick asbestos Cement Plain building boards, fixed to timber frame work with screws in ceilings including dismantling of old unserviceable complete, all as specified and directed. |
| 49 | S&F anodised GI snap grid (Size of grid 605mmx605mm ) frame work for false ceiling including GI wire 4mm thick as a suspender for GI snap grid framing including dismantling of old unserviceable complete, all as specified and directed. |
| 50 | S&F 4 mm thick Non asbestos fibre cement building board decorative type( e-board) fixed in aluminium snap grid frame work with screws including dismantling of old unserviceable complete, all as specified and directed. |
| 51 | S&F 12 mm thick Particle board for insulation purposes, fixed with nails to timber framework fixed to vertical surfaces including dismantling of old unserviceable complete, all as specified and directed. |
| 52 | S&F 5 mm lnsulated PVC Wall Lining consisting of PVC Insulated Panels with Single Side Prelam PVC sheet of designed pattern used in-stead of plain colour sheet duly fitted into the wall as per specifications and drawing including dismantling of old unserviceable complete, all as specified and directed. |
| 53 | S&F Anodised aluminium frame for door,window and ventilator with one or more rebates including joining cleat for fixing etc complete all as specified and directed. |
| 54 | S&F Anodised aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handels 2 Nos in each door, hinges, anodised alumnium snap beading, screws etc. complete all as specified |
| 55 | S&F Anodised aluminium window & ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws etc. complete all as specified and as directed. |
| 56 | S&F in repairs Hydraulically regulated Door closer Aluminium (extruded section body) , universal type, suitable for door shutters complete all as specified and as directed. |
| 57 | Taking down chowkhats or frame with shutter (without taking off shutters from the frame) exe 1.5 sqm n.exe 4 sqm each complete all as specified and as directed. |
| 58 | Taking down chowkats or frames with shutters (without taking off shutter from the frames ) not exceeding 1.5 Sqm each complete all as specified and as directed. |
| 59 | Taking down Shutters of any description n exc 1 sq.m each complete all as specified and as directed. |
| 60 | Taking down Shutters of any description exc 2 sq.m each complete all as specified and as directed. |
| 61 | Taking down shutters and refixing in same opening of any description n.exc 1 Sqm each complete all as specified and directed. |
| 62 | Taking down shutters and refixing in same opening of any description exc 1 Sqm but not exc 2 Sqm each complete all as specified and directed. |
| 63 | S&F Well seasoned 2nd class hard wood plain, solid, straight chowkat and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed. |
| 64 | S&F 30 mm thick flush shutters, solid core construction , with Block boards core and plywood face panels , commercials type on both side complete all as specified and as directed. |
| 65 | S&F 35mm thick 2nd class hardwood glazed skelton shutter open rebated and prepaid to receive glass gauze extra (without sash bar), edges of plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc. size of members of shutter as specified in SSR part-I, sec 8 clause 8.24(a) complete all as specified and directed. |
| 66 | S&F 30mm thick 2nd class hard wood glazed and skelton shutter open rebated and prepaid to receive glass gauze etc, divided into squares (with sash bar), edges of plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc. size of members of shutter as specified in SSR part-I, sec 8 clause 8.24(a) complete all as specified and directed. |
| 67 | S&F 1st class soft wood Small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary' labours; articles n exc 200 cu. cm each |
| 68 | S&F solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as directed. |
| 69 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying and fixing in the frame at site as per specifications and drawings in Section 8 of SSR Part-II complete all as specified and directed. |
| 70 | S&F Factory made single extruded WPC(Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp- ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge complete all as specified and directed.(M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). → Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed. |
| 71 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge complete all as specified and directed.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 72 | S&F in repairs mild steel butt hinges, 50 mm long \\"medium weight\\" cold rolled complete all as specified and directed. |
| 73 | S&F in repairs mild steel butt hinges, 75 mm long \\"medium weight\\" cold rolled complete all as specified and directed. |
| 74 | S&F in repairs mild steel butt hinges, 100 mm long \\"medium weight\\" cold rolled complete all as specified and directed. |
| 75 | S&F in repairs 300 mm long aluminum alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of steel, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy complete all as specified and as directed. |
| 76 | S&F in repairs aluminium handles, 125 mm long, cast type, anodised complete all as specified and as directed. |
| 77 | S&F in repairs aluminium handles, 150 mm long, cast type, anodised complete all as specified and as directed. |
| 78 | S&F in repair mild steel barrel tower bolts, 125 mm long, stove enamelled black with bright bolt complete all as specified and as directed. |
| 79 | S&F in repair mild steel barrel tower bolts, 150 mm long, stove enamelled black with bright bolt complete all as specified and as directed. |
| 80 | S&F in repair mild steel barrel tower bolts, 200 mm long, stove enamelled black with bright bolt complete all as specified and as directed. |
| 81 | S&F in repair mild steel barrel tower bolts, 250 mm long, stove enamelled black with bright bolt complete all as specified and as directed. |
| 82 | S&F in repairs Brass chromium plated brackets complete all as specified and as directed. |
| 83 | S&F in repairs Harrison rails,anodised aluminium alloy, chromium plated with fixing brackets, stops, rollers etc.complete all as specified and as directed. |
| 84 | S&F in repair mild steel chromium plated aluminium anodized tubular curtain rails, 19mm dia, with fixing brackets, stops, rollers etc. complete all as specified and as directed. |
| 85 | S&F in repair Galvanised mild steel wire cloth, 0.63mm nominal dia of wire & average width of aperture 1.40mm with tinned tacks, or galvanised wire staples |
| 86 | M&L Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty. |
| 87 | S&F in repair 15mm bore chromium plated bib taps, cast copper alloy, screwed down, with crutch or butterfly handle, screwed for steel pipe or brass ferrule complete all as specified and directed. |
| 88 | S&F in repair 15mm bore chromium plated stop valves, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for steel pipe for unions complete all as specified and directed. |
| 89 | S&F in repair 15mm bore stop valves, chromium plated, with Long shank and cup (concealed type), cast copper alloy, screwed down, high pressure with capstan head, screwed for steel pipe or brass ferrule complete all as specified and directed. |
| 90 | S&F in repairs plastic water closet seat cover, white / black, with mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 91 | S&F in repair 500 ltrs rotational moulded polythytene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position as specified in SSR Part I complete all as specified and as directed. |
| 92 | S&F in repair 1000 ltrs rotational moulded polythytene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position as specified in SSR Part I complete all as specified and as directed. |
| 93 | S&F in repair ball brass valves high pressure, with polythene float and fly nut complete screwed for iron pipe or for brass ferrule and fixed 20 mm bore dia of pipe complete all as specified and as directed. |
| 94 | S&F in repairs 15 mm bore pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe. complete all as specified and as directed. |
| 95 | S&F in repair vitreous china wash down water closet pan (Pedestal pattern), white, including fixing bolts nut & plastic water closet seat back excld flushing cistern and flush pipe, including taking down unserviceable water closet pan complete all as specified and directed. |
| 96 | S&F in repair vitreous china squating pan orissa pattern size 580X 440mm white with intregal foot rest complete including lime concrete (excluding flushing cistern and flush pipe) but connecting to flushing pipe, anti-symphonage pipe etc. complete all as specified and directed. |
| 97 | S&F in repair 10 ltr capacity PVC valveless syphone action type, flushing cistern low level, white with inlet, ball valve float and handle incl brackets with PVC high flush pipe complete all as specified and directed. |
| 98 | S&F in repair Vitreour china WHB size 550 x400 mm (Flat back or angle back type) white with 32 mm dia brass CP Waste fittings , galvanised iron light grade 32 mm bore waste pipe, a pair of CI brackets duly painted/erecting stand incl cutting and pinning in ends making good disturbed surfaces in cm 1:3 incl taking down u/s WHB and connected items, complete all as specified and directed. |
| 99 | S&F in repair Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed. |
| 100 | S&F in repair looking mirror 600mm x 450mm of selected quality 5 to 6mm thick glass mounted with glass shelf assembly with CP rails fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 101 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 102 | S&F in repair Sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915 mm x 460 mm and bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed. |
| 103 | S&F in repair for 15mm size PVC connection pipe with PTMT nut of length 450mm complete all as specified and directed. |
| 104 | S&F in repair 15 mm size PVC connection pipe with PTMT nuts of length 600 mm complete all as specified and directed. |
| 105 | S&F in repair waste pipe of dia 32 mm complete all as specified and as directed. |
| 106 | S&F in repair 32 mm Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm- 45gms/40mm-60 gms) complete all as specified and directed. |
| 107 | S&F in repair 32 mm Bottle trap of PTMT having minimum water seal of 25mm .(Minimum weight 32mm-260gms/ 40mm-270 gms) complete all as specified and directed. |
| 108 | S&F in repair Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed. |
| 109 | S&F in repair chromium plated towel rail 600mm long complete all as specified and directed. |
| 110 | S&F in repair for PVC (SWR) Floor trap of 75 mm outlet plain with grating including jointing with solvent cement complete all as specified and directed. |
| 111 | S&F in repair 110mm bore PVC ( SWR) pipes single socketed ,in any length with rubber ring joints, fixed to wall complete all as specified and directed. |
| 112 | S&F in repair 110MM PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 113 | S&F in repairs PVC (SWR) , 110mm bore, single socketed in any length with rubber ring joints, fixed to walls with MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc, complete all as specified and directed. |
| 114 | S&F in repair 75mm bore PVC ( SWR) pipes single socketed ,in any length with rubber ring joints, fixed to wall complete all as specified and directed. |
| 115 | S&F in repair 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. |
| 116 | S&F PVC (SWR) bends of radius 110mm bore complete all as specified and as directed. |
| 117 | S&F in repair PVC (SWR) bends of radius 75mm bore complete all as specified and as directed. |
| 118 | S&F in repair PVC (SWR) junction single,(Single T) equal or unequal of radius 110mm bore complete all as specified and as directed. |
| 119 | S&F in repair PVC (SWR) junction single,(Single T) equal or unequal of radius 75mm bore complete all as specified and as directed. |
| 120 | S&F in repair 110mm dia PVC(SWR) junction single, (single T) equal or unequal with access door complete all as specified and as directed. |
| 121 | S&F in repair mild steel flat iron 25 x 3 mm as in band, straps, hold fasts etc and similar small articles conforming to Fe-410-0 or Fe-310-0 complete all as specified and as directed. |
| 122 | S&F in repair 3mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.50sqm in each pane complete all as directed. |
| 123 | S&F in repair 3.0 mm thick figured glass, pin head type glazing with oil putty in squares not exc. 0.50sqm in each pane complete all as specified and as directed. |
| 124 | S&F in repair Sheet glass 5.5mm thick, ordinary quality & glazing with oil putty in square exc 0.5 sq.m in each pane including hacking out old broken glass (any thicknesss, size,quality or description) from metal frame inlcuding punching or drilling out old glazing pins/spring clips & providing & fixing new ones complete all as specified and directed. |
| 125 | M&L for applying one coat of white washing after preparation of old decorated plastered or unplastered surfaces of wall complete all as specified and as directed |
| 126 | M&L for preparation of old painted surfaces of walls including cornices, pilasters and other wall features etc by washing, rubbing down and stopping and applying one coat of exterior grade weather coat paint complete all as specified and as directed |
| 127 | S&F preparation of old plastered or unplastered surface of walls by brooming down and steel wire brushing and applying one coat of colour washing complete all as specified and directed. |
| 128 | S&F preparation of old plastered or unplastered surface of walls washing, rubbing with water and applying one coat of oil bound distemper complete all as specified and directed. |
| 129 | S&F preparation of old plastered or unplastered surface of walls by brooming down cleaning properly wire brushing and applying one coat of cement base paint including necessary curing complete all as specified and directed. |
| 130 | M&L including preparing of new surfaces and treated with two coats of white wash on it complete all as specified and directed. |
| 131 | M&L for prepration of new plastered surfaces and applying two coats of cement base paint complete all as specified |
| 132 | M&L for preparation of old painted wooden surfaces of any description, not otherwise described for, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed |
| 133 | M&L for preparation of old painted wooden surfaces of any description, not otherwise described for, not 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed |
| 134 | M&L for preparation of old painted steel surfaces of any description over 10cm width or girth, not otherwise described for and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 135 | M&L for Preparation of new steel surfaces of any description n.exc.10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 136 | M&L for preparation of wood and wood based materials, new or old, of any description and girth, not otherwise described, and treated with tar or coal tar black paint complete all as specified and directed. |
| 137 | M&L for preparing surfaces of wood and wood based materials new or old of any description and girth not otherwise described and treated with two coats of creosote oil complete all as specified and directed. |
| 138 | Welding in repairs exc 2.5cm but n exc 5cm in length thickness of metal to be welded exc 20mm but n exc 25mm,including refixing the same complete all as specified and as directed |
| 139 | S&F for rolled mild steel in joist, channel, angle or tee / tubular sections , fixed independently with connected plates Fe 410-W (Gde- E-250) quality-B complete all as specified and as directed |
| 140 | M&L for 40mm thick hard wood planed at both sides boarding as in joist of ceiling, rafters, truss and members including dismantling old unserviceable complete all as specified and directed |
| 141 | S&F in repairs of laying bitumen Tarfelt weighing min 1.5 Kg/Sqm on AC/CGI roof sheets in any position with self adhesive/ bitumen coated complete all as specified and directed. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
